need help for rooting - Eee Pad Transformer General

I'm new to here. I have an Asus tf101-x1 (the BlackFriday version from Bestbuy), it says B90KASxx on the box, and the firmware is US_epad-8.5.5.9-20110816. I tried to use Razorclaw to root my device, but failed, it tells me that it lacks some file needed, I need some help for rooting it. After reading some threads, some members say that it works for their B90, is it an issue of my firmware version? if it is, what version do I need to root it? or is there another way around to root it?

Your question was answer in the other thread.
http://forum.xda-developers.com/showpost.php?p=20654038&postcount=9

zdarkhalo said:
I'm new to here. I have an Asus tf101-x1 (the BlackFriday version from Bestbuy), it says B90KASxx on the box, and the firmware is US_epad-8.5.5.9-20110816. I tried to use Razorclaw to root my device, but failed, it tells me that it lacks some file needed, I need some help for rooting it. After reading some threads, some members say that it works for their B90, is it an issue of my firmware version? if it is, what version do I need to root it? or is there another way around to root it?
Click to expand...
Click to collapse
I don't think you can for now. Razorclaw needs the firmware to be at 8.6.5.19 (or .18), and you can't get there through OTA updates. B90 can't get a custom recovery unless its rooted, so you can't flash the rom.

Related

[Q] FRG83D update on a rooted N1

Hi all, I'm quite new to this forum and I hope I dont break any netiquette with my question.
Now I have a N1 I bought on ebay, used, rooted and perfectly functioning.
I don't remember how, but I was able to update it to FRG83D downloading the rom, renaming it, copying on my sdcard etc ...
Now ...
I can't update to FRG83D.
I understood that having a rooted N1 NO OTA UPDATE shall ever work for me, not the manual update is available.
I was able to skip the "no signature verification" error suing clockwork mod, but i can't install the patch anyway, the system alway replies "assert failed: apply_patch_ckeck (" stystem app accountandsyncsetting . apk" ... then a serie of letters and number follows.
I know nothing about this, I must confess, but my suspect is that the update fails because something doesn't match between the update and the ROM which is working on my N1 (which is by the way the original one build frg83d
baseband version
32.36.00.28U_4.06.00.12_7
kernel
2.6.32.9-27240-gbca5320 android-build apa26 #1
Any sugestion ?
I mean and idea about where I can download a FRG83D version suitable for my phone ?
If you just want stock with very little tweaks, may i suggest Geo's Rom. It's basically the latest stock rom w/ superuser, busybox, trackball alert etc. Runs amazing too =)
As for breaking any netiquette, you're suppose to post this in the questions forum not the general. Have fun with your phone.
worked!
Thanks Mokurex!
It worked.
It's unbelievable.
I spent three nights in search of an answer, and then you solved it in few seconds.
I'm new to Android, and I must confess that I'm quite disoriented.
There hare hundred of versions, produced by individuals, companies, etc ... The one I used, I mean the one you suggested me, seems to be the fruit of an individual's work in the US.
It's ok to me, sounds and works good.
But It's not the original one, I mean the one released by ... Google ? or ... what ?
It doesn't matter, but I just want to say that it would be easier for us all, newbies, to have some clear guidelines on this, an online guide for dummies, something or somebody who would explain us the difference between a odexed or deodexed versions, what are the pro and cons of rooting a N1, the fact that rooted phones loose the OTA update (which is very VERY painful for us newbies, etc ...).
I understand that we can rely of forums and on kind people like you, but having some clear cut guidelines would be very useful.
... and looking at the future ... I guess I'll have the same problems when I'll have to update to Gingerbread.
I's very frustrating to search the web for a suitable ROM for your phone ...
stefanopelloni said:
[snip]
But It's not the original one, I mean the one released by ... Google ? or ... what ?
Click to expand...
Click to collapse
No, it's not the original. That one is deodexed, so any future OTA updates will not work (as Google's stock ROMs and updates and not de-odexed). You will have to wait until someone repacks the update, then apply it.
stefanopelloni said:
[snip]
It doesn't matter, but I just want to say that it would be easier for us all, newbies, to have some clear guidelines on this, an online guide for dummies, something or somebody who would explain us the difference between a odexed or deodexed versions, what are the pro and cons of rooting a N1,
Click to expand...
Click to collapse
Did you read the wiki? There are lots of posts/threads/guides available.
stefanopelloni said:
[snip]
the fact that rooted phones loose the OTA update (which is very VERY painful for us newbies, etc ...).
Click to expand...
Click to collapse
What are you trying to say? Phones running a rooted, but otherwise stock ROM will certainly received the OTA updates. Now if you use a non-stock ROM, you may or may not receive the OTA update. But whether you receive it or not, you will not be able to apply it as is, until someone repacks it (unless you are using the stock ROM, rooted or not).
I believe you have to use the stock recovery as well if you wanted to update via OTA.
If you want to get Gingerbread by way of OTA, then revert to stock rom and recovery. Everything you need is in the sticked thread in the development section.
Mokurex said:
I believe you have to use the stock recovery as well if you wanted to update via OTA.
[snip]
Click to expand...
Click to collapse
No, you do not. You just need a newer version of Amon_RA (1.9+) or CWM.
Thank you for the correction.
Efrant, Mokurex,
perhaps it's my problem.
My original plan was to restore my phone is a status capable of receiving OTA updates. Considering that I'm not an IT expert it would be easier for me ho have such a phone.
Wandering on the web, I discovered that rooted phones are not eligible for OTA updates.
And most important of all, I'm not eligible to manually update is as well using the patches on the net (signature verification errors ... and many others seen above).
Mokurex helped me a lot (actually, solved my problem by now) suggesting that version of the ROM (I mean Geo's one) but it's the fruit of a work of an individual. I'm very grateful to him as well, but who knows about the future. Will Geo provide a similar version of Gingerbread as well ? Because without him I can't upgrade.
Efrant, got your remark.
I have CWM, latest version, I also bought the premium version (in oder to show to the programmer of it my appreciation) but in my case it just doesn't work.
With it, I can bypass the signature issue, but then I got stuck at assert failed: apply_patch_ckeck (" stystem app accountandsyncsetting . apk
Oh, by the way, I also tried to go back to ERE27 or something like that (unrooted version etc ...) but the mobile just doesn't work at all ...
I understood that the only way to unroot my phone (actually, any phone) and qualify for the OTA is via SDK.
... but I'm afraid it's just a bridge too far for my poor knowledge.
Geo has been quick to update his rom to the newest version. To upgrade to gingerbread, i'd assume that it would be like flashing any other custom rom, but there might be a bit more steps involved.
If you want completely stock, no root whatsoever, go here.
stefanopelloni said:
[snip]
Wandering on the web, I discovered that rooted phones are not eligible for OTA updates.
And most important of all, I'm not eligible to manually update is as well using the patches on the net (signature verification errors ... and many others seen above).
Click to expand...
Click to collapse
I said it before, and I'll say it again: rooting has no bearing on the phone's ability to receive and install OTA updates -- what matters is which ROM you have. I rooted my phone when I bought it, and it had Eclair on it. I have received EVERY OTA update without any problem.
stefanopelloni said:
[snip]
Efrant, got your remark.
I have CWM, latest version, I also bought the premium version (in oder to show to the programmer of it my appreciation) but in my case it just doesn't work.
With it, I can bypass the signature issue, but then I got stuck at assert failed: apply_patch_ckeck (" stystem app accountandsyncsetting . apk
Click to expand...
Click to collapse
That is probably because you were not using a stock ROM...
stefanopelloni said:
Oh, by the way, I also tried to go back to ERE27 or something like that (unrooted version etc ...) but the mobile just doesn't work at all ...
I understood that the only way to unroot my phone (actually, any phone) and qualify for the OTA is via SDK.
... but I'm afraid it's just a bridge too far for my poor knowledge.
Click to expand...
Click to collapse
If you want a stock ROM, you can go here: http://developer.htc.com and download a Nexus One image to your sdcard, rename it to PASSIMG.zip and boot the phone into bootloader (by holding the trackball and powering up the phone). It should automatically detect the file and allow you to flash it.
Files from the site are official. If you get them from anywhere else, you can't really know what's been modified.
Dear Efrant,
if you were a girl, and in Italy, I would probably kiss you.
Now I have a bright-clear picture of the situation.
During the next holiday, I'll try and flash a stock version of the OS and then try the OTA update.
By now, the version mokurex suggested me work brilliantly and after so many nights wasted in a desperate search of an answer my myself i'm going to have a break.
... but thanks a lot. thanks indeed !!!
Sorry to disturb you again Eftant.
The fact is that today decided eventually to follow your step, but encountered another unexpected problem.
downolaed the original HTC rom - done
renamed it passimg.zip - done
turned on the N1 pressing trackball - done
expected detection of PASSIMG.zip - done
opening passimg.zip - done
checking passimg.zip - done
and then .. nothing
once the N1 load the passimg.zip file (i notice it from a loading bar on the upper right conder of the phone) it just allow me to
1)run bootloader agan
2) lock sim
3) restore something ...
... and that !
No possibility to "flash" rom as you wrote.
Did I miss anything ?
I see from the web that a lot of people bring back the N1 to the stock image using SDK from PC (MAC in my case) but the steps are not so clear considering the fact that I'm not that comfortable with the shell and the Android SDK is not intuitive (... to me).
Thanks in any case for your attention!
Try wiping your device then download the FRF91 image from the same site, rename it to PASSIMG.zip and save it to the root of your sdcard. Put your sdcard back into your device, and boot into the bootloader (by holding down the trackball as you push the power button). Once it flashes, wait for the OTA to FRG83G. Some users have said that the later images don't work using, particularly if you have updated to the 0.35 version of the bootloader.

how to open bootloader?

I bought motorola Atrix week ago and i want install custom rom but my android version is 2.2.2 and
system version 4.4.80.MB860.Partner.en.IL
baseband version N_0.95.00R
kernal version 2.6.32.9-00001-gfdaed51
build number OLYEM_U4_4.8.0
Thank you
Hey, I bought my Atrix some few days back and wanted to unlock (bootloader) it, install CWM and root it. And I did hello lot of searching for that, and found this page and used it to get everything done.
Link: http://forum.xda-developers.com/showthread.php?t=1202883
So, I would recommend you the above link -- it's sufficient and has just one file for download with everything in it.
NOTE: I had Android 2.3.4 installed on my Atrix and the above guide applies to Android 2.3.4 running Atrix only. So take due notice of this.
ONE MORE THING: Read this page in full so that you gain knowledge of what you are doing. And I think once the bootloader is unlocked, you cannot re-lock it (anyway, I'm yet to find a link/page which would help me relock it).
Link: http://forum.xda-developers.com/showthread.php?t=1154600
That's it. Good luck. Enjoy!
There is no guide for my version?
cuz I afraid to get a hard brick with another version guide
yes I know what it is bootloader root and etc
I had htc legend before
forum.xda-developers.com/showthread.php?t=1154600
I tried all those guides and no one helped me to open my bootloader
any suggestions?
virus54 said:
I tried all those guides and no one helped me to open my bootloader
any suggestions?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1136261

Which TWRP for TF300TL?

Hi!
I would like to apologize, if I was unable to find a matching thread for my problem. I am rather new to Android and have great respect for unlocking and modding my device, but would like to do so. I own a TF300TL and are stopped at the very beginning. I am unable to find the matching TWRP for the device and would like to know, which would be the correct file, as I am afraid, that I could easily brick my device. Perhaps someone has done this with a TF300TL. At the moment, I have not yet unlocked the bootloader.
I have installed the latest stock rom on the device.
Do I have to flash the TG version of TWRP? And I am unsure, if I need -JB, -4.2? It is very difficult to understand.
Regards,
Matthias
xcommy said:
Hi!
I would like to apologize, if I was unable to find a matching thread for my problem. I am rather new to Android and have great respect for unlocking and modding my device, but would like to do so. I own a TF300TL and are stopped at the very beginning. I am unable to find the matching TWRP for the device and would like to know, which would be the correct file, as I am afraid, that I could easily brick my device. Perhaps someone has done this with a TF300TL. At the moment, I have not yet unlocked the bootloader.
I have installed the latest stock rom on the device.
Do I have to flash the TG version of TWRP? And I am unsure, if I need -JB, -4.2? It is very difficult to understand.
Regards,
Matthias
Click to expand...
Click to collapse
Try going to the TWRP website then search by your device. The differences are clearly explained there. I have the 300 and I have the late July OTA, I beeline it's 10.1.6.25.1 ire something close to that. In any event I had to use the 4.2 version. Be sure to use the blob file and not the IMG file.
Sent from the Awesome Lone Star State where the law abiding carry guns and the criminals think twice.

Just updated Jan 14, now I can't root my phone?

What can i do to solve this problem? is there a way to restore a previous version without rooting it? because i obviously can't do that... N900VVRSEPL1 is the version i have.
See page 3 of "Official Verizon Update???" thread
https://forum.xda-developers.com/verizon-galaxy-note-3/general/official-verizon-update-t3538935
This (PL1) update appears to be a security patch release, so it's probably not surprising that former rooting methods for OB6 & OF1 no longer are working - that's the point of security updates.
Same experience here. I would bet that however these tools are getting root will probably work on PL1. It seems that in running the tools, the tools simply don't recognize PL1 as a working version and don't try. I don't know that for certain, it's just a guess.
LSkeeno said:
What can i do to solve this problem? is there a way to restore a previous version without rooting it? because i obviously can't do that... N900VVRSEPL1 is the version i have.
Click to expand...
Click to collapse
Just get to sammobile and search your device then select 5.0 OF1 and flash whit odin, the it gonna get back again you will get root by using arabicktool. Saludos!!

How to downgrade ZC520TL from N to M

Hello all,
this is my first post on XDA so I hope I am doing everything according to the rules. If I do something wrong, apologies and I will do better next time.
So, I recently purchased a Zenfone 3 MAX in the US in a hurry out of necessity. So I was quite annoyed to find out that ASUS has hidden the ability to format the SD card as internal memory. However I found out there is a way to un-hide the feature via adb. But the procedure I found is tested to work with Marshmallow, and I had already updated the phone to Nougat. Indeed, the adb command has had no effect on my phone.
So, now I am trying to downgrade back to Marshmallow. I am definitely a newbie to this world, but I have been able to find this (https://forum.xda-developers.com/zenfone-3/help/how-to-downgrade-zenfone-3-nougat-to-t3573241) thread, which contains a link to a downgrading procedure (https://www.asus.com/zentalk/thread-164531-1-3.html). However, it is not for ZC520TL but for ZE520KL.
I was hoping I could use the same procedure for my phone, if I find the right firmware, but I am not sure I have been looking in the right places. The ASUS website has various firmware versions for the US and I assume the oldest one is Marshmallow (Version US-13.1.4.43), but the procedure above requires two different firmware files and I do not know enough to understand what is the difference and where I can find them.
Anyone can shed some light on this for me?
Thank you
Ityboy said:
Hello all,
this is my first post on XDA so I hope I am doing everything according to the rules. If I do something wrong, apologies and I will do better next time.
So, I recently purchased a Zenfone 3 MAX in the US in a hurry out of necessity. So I was quite annoyed to find out that ASUS has hidden the ability to format the SD card as internal memory. However I found out there is a way to un-hide the feature via adb. But the procedure I found is tested to work with Marshmallow, and I had already updated the phone to Nougat. Indeed, the adb command has had no effect on my phone.
So, now I am trying to downgrade back to Marshmallow. I am definitely a newbie to this world, but I have been able to find this (https://forum.xda-developers.com/zenfone-3/help/how-to-downgrade-zenfone-3-nougat-to-t3573241) thread, which contains a link to a downgrading procedure (https://www.asus.com/zentalk/thread-164531-1-3.html). However, it is not for ZC520TL but for ZE520KL.
I was hoping I could use the same procedure for my phone, if I find the right firmware, but I am not sure I have been looking in the right places. The ASUS website has various firmware versions for the US and I assume the oldest one is Marshmallow (Version US-13.1.4.43), but the procedure above requires two different firmware files and I do not know enough to understand what is the difference and where I can find them.
Anyone can shed some light on this for me?
Thank you
Click to expand...
Click to collapse
Ask for it. A user in Canada obtained the downgrade. Please write in this thread and share it.
https://www.asus.com/zentalk/forum.php?mod=viewthread&tid=165621&extra=page=1&page=2&mobile=2
MezzaLuna said:
Ask for it. A user in Canada obtained the downgrade. Please write in this thread and share it.
Click to expand...
Click to collapse
Thanks for your reply.
I have looked at the thread you linked, but I could not see any reference to someone successfully getting their phone downgraded to M by Asus. If anything some people in there stress how unhelpful is Asus with the whole thing. So I am not any closer to the solution than I was before.
Ityboy said:
Thanks for your reply.
I have looked at the thread you linked, but I could not see any reference to someone successfully getting their phone downgraded to M by Asus. If anything some people in there stress how unhelpful is Asus with the whole thing. So I am not any closer to the solution than I was before.
Click to expand...
Click to collapse
Look at this for more info.
https://www.asus.com/zentalk/thread-172018-1-1.html
By the way the Zenfone 3 max was a total mess for me so I used my right of withdrawal on the amazon.
I was successfull in downgrading my ZE552KL to M using the raw firmware
Visit this link and download the appropriate raw firmware for your phone
https://vnrom.net/cac-dong-may-khac/asus/
vishal1286 said:
I was successfull in downgrading my ZE552KL to M using the raw firmware
Visit this link and download the appropriate raw firmware for your phone
Click to expand...
Click to collapse
Thanks for the link. I have looked around and found a firmware for the ZC520TL. However I am not sure it is the right one for me because it is my understanding that I need a firmware whose name starts with UL, rather than WW. I am not sure what would happen if I used firmware of a different zone. Moreover, I have been able to recover the right firmware from the ASUS website. What I need is the "RAW firmware" as defined in the procedure I have linked in my original post. But I don't know how that is different from the firmware. As I said, I am very new to this world.
Ityboy said:
Thanks for the link. I have looked around and found a firmware for the ZC520TL. However I am not sure it is the right one for me because it is my understanding that I need a firmware whose name starts with UL, rather than WW. I am not sure what would happen if I used firmware of a different zone. Moreover, I have been able to recover the right firmware from the ASUS website. What I need is the "RAW firmware" as defined in the procedure I have linked in my original post. But I don't know how that is different from the firmware. As I said, I am very new to this world.
Click to expand...
Click to collapse
WW stands for global firmware, however I am not sure what UL is for. You can contact the person in that website asking for your firmware. They will help.

Categories

Resources