Related
I'm pretty new to the Android phones. I bought a Samsung Galaxy Note 8 tablet about a year ago, and I absolutely love it -- which was the only reason why I considered an Android phone when it came time to upgrade. That might have been a mistake.
The phone I chose was a Galaxy S5 from AT&T.
For many reasons I won't go into (and that many of you probably know) Kitkat is awful. Removing SD card access removed one of the most important reasons that I bought the phone. So, I decided to root the thing.
I read a bunch of info on how to root, and, eventually downloaded and tried to use towelroot only to discover that AT&T/Google have blocked all functionality of that program. My build is, unfortunately, the latest build -- July 22 2014 (or there abouts).
Now, I'm not sure if the phone was given to me with that update -- I only got the thing on Sunday. Maybe it was, maybe not. Dunno. So I have a couple of questions.
If I were to factory reset the phone, would that roll back these "Security" OTA updates that were pushed onto the phone? I'm pretty sure there was at least one after I got the thing. I've spent a fair amount of time setting the phone up, but I'll do it again if a factory reset would allow me to root the phone and return the SD card functions.
Is there a way to push an earlier version of the ROM onto the phone. I'm guessing not, since I think I read that AT&T helpfully locked the bootloader.
Finally, does anyone know of any way to root this device if neither of the two paths I presented above will work?
Thanks for any help. If I can't restore the SD card functionality, I'll probably just return the phone. That would be a bummer because I was really excited about it.
CKR83 said:
I'm pretty new to the Android phones. I bought a Samsung Galaxy Note 8 tablet about a year ago, and I absolutely love it -- which was the only reason why I considered an Android phone when it came time to upgrade. That might have been a mistake.
The phone I chose was a Galaxy S5 from AT&T.
For many reasons I won't go into (and that many of you probably know) Kitkat is awful. Removing SD card access removed one of the most important reasons that I bought the phone. So, I decided to root the thing.
I read a bunch of info on how to root, and, eventually downloaded and tried to use towelroot only to discover that AT&T/Google have blocked all functionality of that program. My build is, unfortunately, the latest build -- July 22 2014 (or there abouts).
Now, I'm not sure if the phone was given to me with that update -- I only got the thing on Sunday. Maybe it was, maybe not. Dunno. So I have a couple of questions.
If I were to factory reset the phone, would that roll back these "Security" OTA updates that were pushed onto the phone? I'm pretty sure there was at least one after I got the thing. I've spent a fair amount of time setting the phone up, but I'll do it again if a factory reset would allow me to root the phone and return the SD card functions.
Is there a way to push an earlier version of the ROM onto the phone. I'm guessing not, since I think I read that AT&T helpfully locked the bootloader.
Finally, does anyone know of any way to root this device if neither of the two paths I presented above will work?
Thanks for any help. If I can't restore the SD card functionality, I'll probably just return the phone. That would be a bummer because I was really excited about it.
Click to expand...
Click to collapse
For rooting, go there http://forum.xda-developers.com/showthread.php?t=2696537
or there http://forum.xda-developers.com/showthread.php?t=1980683
Follow tuto or ask here.
You have to give more info (S5 model, firmware...)
Good luck
Franky
Rooting Help?
fgth90 said:
For rooting, go there http://forum.xda-developers.com/showthread.php?t=2696537
or there http://forum.xda-developers.com/showthread.php?t=1980683
Follow tuto or ask here.
You have to give more info (S5 model, firmware...)
Good luck
Franky
Click to expand...
Click to collapse
I see that there are tutes here, and am wading through the 50+ pages of forum posts to find what I need. However, my worry is that none of this stuff will work because of the new firmware. Here is all the info that I have on my phone:
Galaxy S5 AT&T US version (SAMSUNG-SM-900A)
Android 4.4.2
kernel version 3.4.0-2178781 [email protected] #1 Tuesday July 22
Build # KOT49H.G900AUCU2ANG3
SE for Android Status
Enforcing SEPF_SAMSUNG-SM-G900A_4.4.2_0018 Tuesday July 22
Security Software version:
MDF v1.0 Release 3
VPN v1.4 Release 1
Thanks all the pertinent info, I think.
Because the update was so new, I don't think there's a way to root this anymore. People keep telling me to use ODIN and to download an earlier ROM (and I now have ODIN and an earlier ROM -- hopefully from a good source, but I have no idea if it is), but my impression is that this latest AT&T "security" update keeps you from reflashing the ROM because of the bootloader lockout.
Any further help would be appreciated.
Thanks
CKR83 said:
...
Any further help would be appreciated.
Thanks
Click to expand...
Click to collapse
Hello,
As I told you, the only method working for me (because of towelroot non working) is cf auto root.
Check periodicaly here http://autoroot.chainfire.eu/ to see if your model is listed.
I had just a look and it's not listed yet.
If it is, flash by odin and look if root works.
If not, you've got to flash by odin the same rom again (keep your original file on pc), you'll loose nothing, and report this fails on chainfire to test other solution.
Good luck
Franky
CKR83 said:
Here is all the info that I have on my phone:
Galaxy S5 AT&T US version (SAMSUNG-SM-900A)
Android 4.4.2
kernel version 3.4.0-2178781 [email protected] #1 Tuesday July 22
Build # KOT49H.G900AUCU2ANG3
SE for Android Status
Enforcing SEPF_SAMSUNG-SM-G900A_4.4.2_0018 Tuesday July 22
Security Software version:
MDF v1.0 Release 3
VPN v1.4 Release 1
Click to expand...
Click to collapse
Not only build number and kernel version, you need to check your Bootloader version with Phone INFO ★Samsung★ app (in the FIRMWARE INFO section).
Bootloader version is one of the important info to check when you are going to root or flashing custom rom.
vndnguyen said:
Not only build number and kernel version, you need to check your Bootloader version with (in the FIRMWARE INFO section).
Bootloader version is one of the important info to check when you are going to root or flashing custom rom.
Click to expand...
Click to collapse
Hey that looks like a great utility. Thanks! The bootloader is G900AUCU2ANG3
Does that help any? People keep telling me I need to use ODIN and flash this, that or the other thing. Those comments would probably be more helpful if I knew more about this stuff, but my reading has lead me to believe that ODIN won't work with certain version of the bootloader. Or is that wrong?
CKR83 said:
Hey that looks like a great utility. Thanks! The bootloader is G900AUCU2ANG3
Did you every get your post July 2014 AT&T GS5 rooted?
If so, please drop me an email.
Thanks
TPG
Click to expand...
Click to collapse
No unfortunately not....
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
After a whole week of searching and tripping knox i finally done it:
SM-G9208 root
After using CROM service and unlocking the CROM using ODIN to flash the attached file.
The source is this:
http://apk.tw/thread-704730-1-1.html
http://pan.baidu.com/s/1ntu1gjn
No credit to me
Here is my uploaded copy:
http://farzad.devbro.com/SM-9208_root_0902.tar
Dude, you saved my life
Was about to sell my s6 when I saw this man. Thank you so much
Edit: By any chance can you reupload the file here? Takes so long to download because it throttles at 25 kbps for me :/
Edit 2: Nvm got it to download fast haha FINALLY ROOT ACCESS!!
u root without tripping knox ?
ham4ever said:
u root without tripping knox ?
Click to expand...
Click to collapse
My knox was tripped before hand. Not sure if it does or not.
JoeCatarata said:
Was about to sell my s6 when I saw this man. Thank you so much
Edit: By any chance can you reupload the file here? Takes so long to download because it throttles at 25 kbps for me :/
Edit 2: Nvm got it to download fast haha FINALLY ROOT ACCESS!!
Click to expand...
Click to collapse
What is your Knox status?
Is it also for g920f with coh2? Knox?
devbro said:
What is your Knox status?
Click to expand...
Click to collapse
Don't really know how to check lol haha
JoeCatarata said:
Don't really know how to check lol haha
Click to expand...
Click to collapse
my knox is tripped.
After following this method I get a bootloop, any idea why and how to correct it?, already tried a factory reset but it doesn´t work, I had to flash stock rom again.
Edit: It happens because I upgraded to the latest 5.1.1 version available last week:
Model SM-G9208
Model name GALAXY S6
Country Taiwan
Version Android 5.1.1
Changelist 5683207
Build date Tue, 06 Oct 2015 11:54:52 +0000
Product code BRI
PDA G9208ZTU2COJ2
CSC G9208ZZT2COJ2
So if you get the update alert in your phone DON´T do it, there is no known way to ROOT this new version.
It was not possible to install a previous 5.1.1 version either (G9208ZTU1BOH2), when I try to flash it with ODIN, the phone just displays an error message “SW REV CHECK FAIL DEVICE 2 BINARY 1”.
Any Ideas are appreciated.
EDIT:
Finally rooted with xiao1u root method!
devbro said:
After a whole week of searching and tripping knox i finally done it:
SM-G9208 root
After using CROM service and unlocking the CROM using ODIN to flash the attached file.
The source is this:
http://apk.tw/thread-704730-1-1.html
http://pan.baidu.com/s/1ntu1gjn
No credit to me
Here is my uploaded copy:
http://farzad.devbro.com/SM-9208_root_0902.tar
Click to expand...
Click to collapse
Root works perfectly, but has anybody got TWRP working on 5.1? I've always had unusable touchscreen issues on it so stayed back on 5.0.2 until somebody devs a working build.
Dissmeister said:
Root works perfectly, but has anybody got TWRP working on 5.1? I've always had unusable touchscreen issues on it so stayed back on 5.0.2 until somebody devs a working build.
Click to expand...
Click to collapse
no go. i used the TWRP app to flash all new files.
devbro said:
no go. i used the TWRP app to flash all new files.
Click to expand...
Click to collapse
So your twrp works perfectly on 5.1 base? If so, could you share it with me?
I've been looking for a twrp that worked on 5.1 without the touchscreen not working. Thanks man
Definitely no luck rooting my phone,
Product code BRI
PDA G9208ZTU2COJ2
CSC G9208ZZT2COJ2
The file on first post didn´t work, and 3 days after I rooted (and everything was working perfectly) using this file:
http://pan.baidu.com/wap/album/file...26914354&fsid=128909912720545&adapt=pc&fr=ftw
I get the following error message every time i need root access:
"There is no SU binary installed, and SuperSU cannot install it. This is problem! If you upgraded to Android 5.0, you will need to manually re-root - consult the relevant forums for your device!"
If the phone is restarted or turned off after getting this error message the phone is death, it doesn´t start again.
I tried reflashing the root file, but it didn´t work.
I had to reinstall the stock ROM agan, and waiting for any effective root method for 5.1.1 OJ2 ROM.
0ptimus82 said:
After following this method I get a bootloop, any idea why and how to correct it?, already tried a factory reset but it doesn´t work, I had to flash stock rom again.
Edit: It happens because I upgraded to the latest 5.1.1 version available last week:
Model SM-G9208
Model name GALAXY S6
Country Taiwan
Version Android 5.1.1
Changelist 5683207
Build date Tue, 06 Oct 2015 11:54:52 +0000
Product code BRI
PDA G9208ZTU2COJ2
CSC G9208ZZT2COJ2
So if you get the update alert in your phone DON´T do it, there is no known way to ROOT this new version.
It was not possible to install a previous 5.1.1 version either (G9208ZTU1BOH2), when I try to flash it with ODIN, the phone just displays an error message “SW REV CHECK FAIL DEVICE 2 BINARY 1”.
Any Ideas are appreciated.
EDIT:
Finally rooted with xiao1u root method!
Click to expand...
Click to collapse
Hey, the same thing happened to me, I was stupid enough to not read this before. I tried the xiao1u method and it works, but it breaks mobile data. Did you get that issue?
Dissmeister said:
Hey, the same thing happened to me, I was stupid enough to not read this before. I tried the xiao1u method and it works, but it breaks mobile data. Did you get that issue?
Click to expand...
Click to collapse
Not in my case, my data was working perfectly, but problems started to show up 3 days after I rooted it, in the end it didn´t start again.
I haven´t found any other way to root this build yet and I´m still looking for a custom rom with no success.
If you want to give another try to xiao1u file try to disable the setting for "allow Google to regularly check device activity for security problems or warn about potential harm" after a clean ROM install, you can do it going to the GOOGLE SETTINGS app > SECURITY > VERIFY APPS & uncheck Scan For Security Threats.
Please keep us updated, I´ll post if I find any way to solve it.
0ptimus82 said:
Not in my case, my data was working perfectly, but problems started to show up 3 days after I rooted it, in the end it didn´t start again.
I haven´t found any other way to root this build yet and I´m still looking for a custom rom with no success.
If you want to give another try to xiao1u file try to disable the setting for "allow Google to regularly check device activity for security problems or warn about potential harm" after a clean ROM install, you can do it going to the GOOGLE SETTINGS app > SECURITY > VERIFY APPS & uncheck Scan For Security Threats.
Please keep us updated, I´ll post if I find any way to solve it.
Click to expand...
Click to collapse
Ok you may know this already but I'll post just to let you everybody else know.
DONT UPDATE TO THE LATEST 5.1 OTA. It adds rollback protection to your bootloader, which makes it impossible for you to odin to another build, unless its the same or a future update.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/psa-odin-5-1-1-t3136151
As for our case, mate, I tried everything so far, the root method given by the OP bootloops on the latest OTA (previous 5.1 firmware on Sammobile is fine) and xiao1u method breaks mobile data for me although root does work perfectly. Funny thing is that if you tried the root by the OP and it got bricked, flashing the xiao1u method on top of it will get it working again, because its just the boot partition.
Atm, I just got sick of Samsung and their cr*p, had the same issues with my old Galaxy S4 with their Exynos. Got the Nexus 6P today and absolutely loving it.
I'll try to work it out sometime soon, if I do manage to get it working (mobile data for me) I'll post the fix here. This device is next to DOA for us as we've just got a couple of few blessed asian devs on it (all thanks to them). Unfortunately it may never be enough. I never got the issue you had, though it was just for last night, can you get into download mode? If so, odin the same firmware again. I used the 5.1 OTA on Sammobile, Taiwan. This is only for us who are already stuck in the new bootloader. You wont have root but at least your phone will work.
Cheers mate, all the best. Will update if I find a fix.
Dissmeister said:
Ok you may know this already but I'll post just to let you everybody else know.
DONT UPDATE TO THE LATEST 5.1 OTA. It adds rollback protection to your bootloader, which makes it impossible for you to odin to another build, unless its the same or a future update.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/psa-odin-5-1-1-t3136151
As for our case, mate, I tried everything so far, the root method given by the OP bootloops on the latest OTA (previous 5.1 firmware on Sammobile is fine) and xiao1u method breaks mobile data for me although root does work perfectly. Funny thing is that if you tried the root by the OP and it got bricked, flashing the xiao1u method on top of it will get it working again, because its just the boot partition.
Atm, I just got sick of Samsung and their cr*p, had the same issues with my old Galaxy S4 with their Exynos. Got the Nexus 6P today and absolutely loving it.
I'll try to work it out sometime soon, if I do manage to get it working (mobile data for me) I'll post the fix here. This device is next to DOA for us as we've just got a couple of few blessed asian devs on it (all thanks to them). Unfortunately it may never be enough. I never got the issue you had, though it was just for last night, can you get into download mode? If so, odin the same firmware again. I used the 5.1 OTA on Sammobile, Taiwan. This is only for us who are already stuck in the new bootloader. You wont have root but at least your phone will work.
Cheers mate, all the best. Will update if I find a fix.
Click to expand...
Click to collapse
The results of my attempt to root is not very consistent or stable since 5.02 to 5.1.1 on different updates of the Taiwan variant (G9208).
Since first 5.1.1 update, I used xiaolu method and succeed for few days, I don't know what do you mean " xiao1u method breaks mobile data", my 4G signal was fine. With xposed hooked, I also observed the much more boot time of previous rooted phone, sometimes a smaller bootloop (3 or 4 repeated loops).
But after a very recent "samsung security policy update", the root has "gone" an re-root became impossible no matter by xiaolu's or chainfire UPDATE-SuperSU-v2.46, most time they will cause bootloop and I can use odin to get back to initial status. Does that mean I don't have hope to root again?
Dissmeister said:
So your twrp works perfectly on 5.1 base? If so, could you share it with me?
I've been looking for a twrp that worked on 5.1 without the touchscreen not working. Thanks man
Click to expand...
Click to collapse
This works on my Taiwan variant G9208 on stock 5.1.1,
Go on TWRP repository of dl.twrp.me/zeroflte, seek two .tar files as below and inject them stepwisely with different method
1st (Odin via USB). Twrp-2.8.7.2-zeroflte.img.tar
2nd(use that TWRP -2.8.7.2, operate via an "OTG linked usb mouse" since touch not working...) . to flash Twrp-2.8.7.0-zerofltespr.img (but it's actually 2.8.7.1)
now you have a touchable TWRP.
But I can't get root now, even with xiaolu method, any one with luck, please note me
ttyy121 said:
The results of my attempt to root is not very consistent or stable since 5.02 to 5.1.1 on different updates of the Taiwan variant (G9208).
Since first 5.1.1 update, I used xiaolu method and succeed for few days, I don't know what do you mean " xiao1u method breaks mobile data", my 4G signal was fine. With xposed hooked, I also observed the much more boot time of previous rooted phone, sometimes a smaller bootloop (3 or 4 repeated loops).
But after a very recent "samsung security policy update", the root has "gone" an re-root became impossible no matter by xiaolu's or chainfire UPDATE-SuperSU-v2.46, most time they will cause bootloop and I can use odin to get back to initial status. Does that mean I don't have hope to root again?
Click to expand...
Click to collapse
It happened the same way with my phone, no hope so far.
Has anybody tried arter97 kernel?, G9208 support was added in the last beta but the problem is OJ2 particular release.
http://forum.xda-developers.com/showpost.php?p=63345352&postcount=2080
What is possible with this model?
It's been a while since I last did this, and I'm afraid I'm quite confused...
I am running a custom ROM (Bliss Beta 6) but remembered that updating my ROM doesn't update my baseband/modem.
Are baseband and modem the same thing?
https://support.t-mobile.com/docs/DOC-10398
Using this site here I see that my current baseband (G900TUVU1CNK2) is super outdated. It tells me that G900T3UVU1FOG6 or G900TUVS1FOL1 are the latest, but I don't get why there are two. Which one should I install?
All that being said, can I install using TWRP and a zip, or do I need to ODIN it?
Any help would be appreciated, as I said I've done this before but can't find any updated tutorials that explain the questions I'm asking (I've tried searching google and XDA, if I missed something obvious I would appreciate a link!).
cheers
More research has helped me answer my own question! Sharing what I've found in case anyone else comes across this thread:
Baseband and Modem are effectively the same thing in this context.
G900T3UVU1FOG6 was released in August 2015 and has the fix for stage-fright.
G900TUVS1FOJ4 was released in November 2015
G900TUVS1FOL1 is pretty much brand new (released in December 2015) so there's not a lot on it. This is the one I'm going to try installing.
Followed the instructions from this thread http://forum.xda-developers.com/tmo.../compilation-s5-g900t-stock-firmware-t3042400 to figure it out.
More use information found here:
https://ohthehugemanatee.org/blog/2...m-slash-baseband-firmware-on-a-samsung-phone/
lioncat55 said:
More research has helped me answer my own question! Sharing what I've found in case anyone else comes across this thread:
Baseband and Modem are effectively the same thing in this context.
G900T3UVU1FOG6 was released in August 2015 and has the fix for stage-fright.
G900TUVS1FOJ4 was released in November 2015
G900TUVS1FOL1 is pretty much brand new (released in December 2015) so there's not a lot on it. This is the one I'm going to try installing.
Followed the instructions from this thread http://forum.xda-developers.com/tmo.../compilation-s5-g900t-stock-firmware-t3042400 to figure it out.
More use information found here:
https://ohthehugemanatee.org/blog/2...m-slash-baseband-firmware-on-a-samsung-phone/
Click to expand...
Click to collapse
i've been wondering this myself, so did you update your baseband & is there any change in battery or signal quality? (or i guess stagefright detector?)
also wondering if downgrading is no problem or if it affects anything like that (which stock samsung or other device kernels/ROMs do, sometimes blocking root etc)
Hey, so I actually updated to G900TUVS1FOL1 using ODIN. It nuked everything and installed regular TouchWiz which I wasn't a fan of, but I have no problem installing my own ROM later.
If you're doing the T-Mobile one, then there is no issue with rooting, installing kernels, custom ROMs, etc. I don't really know about "downgrading" the baseband or modem, but I don't think you would need to in this case.
Note that if you have Verizon or At&T you probably want to be SUPER careful, because they lock down everything.
lioncat55 said:
Hey, so I actually updated to G900TUVS1FOL1 using ODIN. It nuked everything and installed regular TouchWiz which I wasn't a fan of, but I have no problem installing my own ROM later.
If you're doing the T-Mobile one, then there is no issue with rooting, installing kernels, custom ROMs, etc. I don't really know about "downgrading" the baseband or modem, but I don't think you would need to in this case.
Note that if you have Verizon or At&T you probably want to be SUPER careful, because they lock down everything.
Click to expand...
Click to collapse
it's a g900t yes
i am going to look into upgrading it more directly rather than the complete samsung image... maybe... so you're confirming the official tmobile samsung 5.1.1 complete installation still lets you flash TWRP then cyanogen without a problem? i came from november 2014 samsung 4.4 to CM originally
kn00tcn said:
it's a g900t yes
i am going to look into upgrading it more directly rather than the complete samsung image... maybe... so you're confirming the official tmobile samsung 5.1.1 complete installation still lets you flash TWRP then cyanogen without a problem? i came from november 2014 samsung 4.4 to CM originally
Click to expand...
Click to collapse
yes, I installed G900TUVS1FOL1 with Odin, had root and TWRP installed just fine (couldn't get xposed to work because it was not a deoxdex rom of course). I just installed BlissPop ROM last night which is based on CM13. So yes, it didn't lock me down or anything.
Is there a way to root muy phone, everything I find is outdated & for an older version.
Provider: Verizon
Service: Metro Pcs
Android: 7.0
Security update: June, 1, 2017
https://forum.xda-developers.com/ve...snapdragon-galaxy-s7-s7e-nougat-root-t3569307
Are you sure that this will work? I didn't see anything on the security patch being supported? He only listed a T-Mobile edge security patch
Dirtydcs said:
Are you sure that this will work? I didn't see anything on the security patch being supported? He only listed a T-Mobile edge security patch
Click to expand...
Click to collapse
The root kernel listed will work with all version.of the os you root, 6.0.1 or 7.0. There have been no posts about certain security updates not running root right, just the posts about supersu updates causing glitches. You'll be fine
So just to understand, security updates are irrelevant if the android version matches?
It's been awhile since I've rooted anything, just trying to get the basics down to avoid a brick.
landshark68 said:
https://forum.xda-developers.com/ve...snapdragon-galaxy-s7-s7e-nougat-root-t3569307
Click to expand...
Click to collapse
gunz.jones said:
The root kernel listed will work with all version.of the os you root, 6.0.1 or 7.0. There have been no posts about certain security updates not running root right, just the posts about supersu updates causing glitches. You'll be fine
Click to expand...
Click to collapse
Dirtydcs said:
So just to understand, security updates are irrelevant if the android version matches?
It's been awhile since I've rooted anything, just trying to get the basics down to avoid a brick.
Click to expand...
Click to collapse
Yeah. The better news is that using Odin and flashing any of the flushable packages through Odin for any carrier will not brick your phone as long as it is a non-Chinese snapdragon variant. So vzw, unlocked, AT&T...whatever your flavor. Devs have hybrid roms that run without root and provide some customization as well.
just did this, sorry was away because of work. say's "custom unlock" now so it worked with no issues! Thank you!!!
@Dirtydcs
Thank you for posting that it worked helps keep info up to date for others.
I just got a SM-G930V from verizion and also have Android Version 7.0, I'm at Security patch level May 1, 2017 and have Baseband version G930VVRS4BQC9 and was wondering if this was the same baseband version you where running? When you rooted.
Thanks
Finger print issue can be fixed by just clearing the prints off your phone
Did some digging but couldn't find any useful information that is current regarding the Verizon LG V20 and rooting it.
I see there is a method for rooting firmware version 12a that supposedly works for version 13a but wouldn't know about that.
Does anyone know if it's possible to root the current version of the firmware? and where can I find a tutorial?
If not is it possible to downgrade from this version of the firmware to the latest rootable version and go from there?
My firmware version is VS99515A.
I'd really like to be able to unlock some features and get rid of the bloatware that is taking up quite a few GB's of space.
If not I'm not going to sweat it much as it's still a great device that would service my needs as is but of course if there is an option to have a better experience then I'll take it.
QwerkyPengwen said:
Did some digging but couldn't find any useful information that is current regarding the Verizon LG V20 and rooting it.
I see there is a method for rooting firmware version 12a that supposedly works for version 13a but wouldn't know about that.
Does anyone know if it's possible to root the current version of the firmware? and where can I find a tutorial?
If not is it possible to downgrade from this version of the firmware to the latest rootable version and go from there?
My firmware version is VS99515A.
I'd really like to be able to unlock some features and get rid of the bloatware that is taking up quite a few GB's of space.
If not I'm not going to sweat it much as it's still a great device that would service my needs as is but of course if there is an option to have a better experience then I'll take it.
Click to expand...
Click to collapse
Would also like to know this as I would like the bluetooth fix updates as i'm still on 10b but still waiting for xposed to come out for nougat and don't want to lose my ability to root.
same
QwerkyPengwen said:
Did some digging but couldn't find any useful information that is current regarding the Verizon LG V20 and rooting it.
I see there is a method for rooting firmware version 12a that supposedly works for version 13a but wouldn't know about that.
Does anyone know if it's possible to root the current version of the firmware? and where can I find a tutorial?
If not is it possible to downgrade from this version of the firmware to the latest rootable version and go from there?
My firmware version is VS99515A.
I'd really like to be able to unlock some features and get rid of the bloatware that is taking up quite a few GB's of space.
If not I'm not going to sweat it much as it's still a great device that would service my needs as is but of course if there is an option to have a better experience then I'll take it.
Click to expand...
Click to collapse
I would like to know about this too, I have the recent update and would like to know if I can downgrade with the lg flash tool and a link to a kdz that would work...
Therez no way with arb now implemented
---------- Post added at 08:36 PM ---------- Previous post was at 08:35 PM ----------
And all the big devs have left our device as i did too
QwerkyPengwen said:
Did some digging but couldn't find any useful information that is current regarding the Verizon LG V20 and rooting it.
I see there is a method for rooting firmware version 12a that supposedly works for version 13a but wouldn't know about that.
Does anyone know if it's possible to root the current version of the firmware? and where can I find a tutorial?
If not is it possible to downgrade from this version of the firmware to the latest rootable version and go from there?
My firmware version is VS99515A.
I'd really like to be able to unlock some features and get rid of the bloatware that is taking up quite a few GB's of space.
If not I'm not going to sweat it much as it's still a great device that would service my needs as is but of course if there is an option to have a better experience then I'll take it.
Click to expand...
Click to collapse
lgup and uppercut, then get 13A or 13B i forgot the letter 13 somthing, then do the dirty santa, 15A was confired to be downgraded. if you like me to test it give me a week i got another v20 coming my way that has 15A on it
LASERWOLF452 said:
lgup and uppercut, then get 13A or 13B i forgot the letter 13 somthing, then do the dirty santa, 15A was confired to be downgraded. if you like me to test it give me a week i got another v20 coming my way that has 15A on it
Click to expand...
Click to collapse
I was figuring this was the way based on some other places on the net. However I wasn't sure if 13a was properly supported for root or not. I know that 12a is. Any insight or confirmation that 13a is in fact rootable?
I came across the thread below and followed it but didnt pull the trigger because I didnt fully understand the process and if it was going to work. So im going to read this thread and see if I can make sense of things.
https://forum.xda-developers.com/v20/how-to/restore-v20-to-100-stock-bricked-devices-t3524903
Don't think you have searched that hard...
All versions of Verizon firmware are downgradeable. This include everything from 11A to 16B. Yes, I have done it, multiple times. If you are on 14, 15, or 16 simply use uppercut to downgrade to either 12A or 13A. You can find the KDZ here:
https://lg-firmwares.com/lg-vs995-firmwares/
What about downgrading from 20C? Just bought this phone because the battery is removable but I must have root or all,is lost. :/
bond32 said:
Don't think you have searched that hard...
All versions of Verizon firmware are downgradeable. This include everything from 11A to 16B. Yes, I have done it, multiple times. If you are on 14, 15, or 16 simply use uppercut to downgrade to either 12A or 13A. You can find the KDZ here:
https://lg-firmwares.com/lg-vs995-firmwares/
Click to expand...
Click to collapse
I cant get uppercut to work....do you know if its still working?
ELECTRIC1982 said:
I cant get uppercut to work....do you know if its still working?
Click to expand...
Click to collapse
Use the LG V20 nodded LG UP in download mode
ELECTRIC1982 said:
What about downgrading from 20C? Just bought this phone because the battery is removable but I must have root or all,is lost. :/
Click to expand...
Click to collapse
You have any luck? I just bought one with 20c and cant find info