Related
Hello friends first of all sorry for my english ( iam still learning ) my problem is i just bought a ideos x5 and i root it. Then i open it with recovery mod and replace clockwork recovery.img with original. But now i cant get it recovery mod i am holding power and volume key appear ideos and its restarting clockwork mod not appearing what can i do to fix this iam really need a custom rom for overclocking.
Regards...
Ok, So what you have to do is download clockwork recovery.img, copy that and replace it on the phone. Boot your phone, hold volume up + power and it will work.
If I were you I would download clockwork again.. probably it is corrupted.
Tcm9669 said:
Ok, So what you have to do is download clockwork recovery.img, copy that and replace it on the phone. Boot your phone, hold volume up + power and it will work.
If I were you I would download clockwork again.. probably it is corrupted.
Click to expand...
Click to collapse
Its my problem. How can i replace recovery.img again i cant reach the cust_backup directory
Please tell us again what you did, your first post does not explain that clearly.
Once again for copying a different recovery.img: Turn off the device; hold both the + and the - buttons and turn it on. Keep holding + and -, wait a few secs until the screen becomes purple. Then plug in the usb-cable.
Does the purple screen show up? Can you start Android with the stock-ROM that is installed now?
If the purple screen shows up and you get stuck there, try it out on another pc.
XphX said:
Please tell us again what you did, your first post does not explain that clearly.
Once again for copying a different recovery.img: Turn off the device; hold both the + and the - buttons and turn it on. Keep holding + and -, wait a few secs until the screen becomes purple. Then plug in the usb-cable.
Does the purple screen show up? Can you start Android with the stock-ROM that is installed now?
If the purple screen shows up and you get stuck there, try it out on another pc.
Click to expand...
Click to collapse
No there is no purple screen because i change original recovery.img with clockwork img. Yes i can start Android with stock rom i cant install new rom because i cant run clockwork mod. I Think my clockwork recovery.img is corrupted or something.
The purple screen should be displayed even if you deleted the recovery.img-file. If you can't reach that screen at all flash an official huawei-ROM, that should bring back the original recovery.img-file.
Please wait for another opinion before you install another ROM.
Yes, when you replace the img.. you will still have the purple screen available!!
Hello, Guys, Its my first post here, so i allready sorry for my bad English.
I have a big problem with my phone, the this is that when i try to turn it on huawei logo appears and after ~5 seconds it dissapears and nothing happens, phone just turns off. I also cant get acces to CMW. Al i can do is to go to pink screen mode. I also tyed to put dload folder with updates to sdhc card, but when i am trying to load i with 3 buttons combination (VOL +- + power on button), pink screen appears... What should i do in this situation? Maybe anyone had faced this problem, and how have you solved it?
Again sorry for my poor English , and thanks for your help
Looks like your boot and recovery partitions were messed up
Can u access ur fastboot mode?
If u can, try to flash a cwm recovery image using fastboot mode
Sent from my HAL
I cant acces anything exept pink screen. When i put dload folder to sd card update also doesnt start. Is there any way to acces internal memoty through pink screen?
Fastboot (or bootloader mode) is the one that stays (in ur case) at the huawey logo until it receives a command to reboot. Using it, adb and a pc, u can flash img's to the internal memory (among other things)
Try pressing and holding for 2/3 seconds this combo
Hang up button + power
Sent from my HAL
As i said before it doesnt help. I cant acces CWM. (bootloader)
Sorry, i was thinking on other phone. The pink screen is ur bootloader
Try this
" Installing ClockworkMod on the Huawei U8800
1) Extract the recovery.img from the zip file. 2) Turn on your phone while holding VOL+ and VOL- (should come up with pink/purple screen) 3) Connect to computer. 4) Go to My Computer and Browse your phone to find the folder with recovery.img in. 5) Replace the recovery.img with the one you extracted from the zip file.
Or this onehttp://forum.xda-developers.com/showthread.php?p=14870348
Sent from my HAL
Tryed both. Same problem persists
just in case you can´t get it fixed,
see my sig.....
i do have the same issue, please someone help me
hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Do not worry!
cute_kayani said:
hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Click to expand...
Click to collapse
Hello there!
As you mentioned that you are not able to see other Recovery options like "Install from zip" etc. This is because you must be booting your phone into the Stock Recovery. For those extra options to come up we need to boot the phone into the Custom Recovery.
To boot into Custom Recovery:
1. Press power on button;
2. Notice when the LED light blinks "BLUE" color; press both the volume keys this time;
3. Now it should show you Custom Recovery options this time;
4. Select "Install from Zip" and flash the ROM you were trying to flash (Also refer to the ROM info if that has some special installation steps).
If the above steps does not resolves the issue then you can always flash you phone with the Stock ROM found in the following article named as SBF:
http://forum.xda-developers.com/showthread.php?t=1216982
[Note: Above mentioned article has all the information that a defy user needs. Thanks "Zephyrot" for that wonderful article.]
Hope that helps!
Good Luck!!
there is no blue led, when press power button it stuck on red moto logo..
and when press both vol down and power it goes into recovery with limited options.
can it is possible i put rom into sd card and rename it with Update.zip and then in recovery use it with update zip..
or any other solution
Thanks
cute_kayani said:
hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Click to expand...
Click to collapse
I guess you'd charge your phone first then wait for a while,
cute_kayani said:
there is no blue led, when press power button it stuck on red moto logo..
and when press both vol down and power it goes into recovery with limited options.
can it is possible i put rom into sd card and rename it with Update.zip and then in recovery use it with update zip..
or any other solution
Thanks
Click to expand...
Click to collapse
I'm disappointed to know that you are still facing the same issue. Also, renaming the file to update.zip will not let you flash it.
As suggested above first recharge your battery for a while and then flash with appropriate SBF of your region using RSD Lite. Refer to the above given link it has all the information. Also, note that if you flash with any particular android version SBF (which is not a fixed SBF) then you will not be able to downgrade (above article has all info).
Hope this helps!
Good Luck!
Okay, thanks for all.. this is the T Mobile Uk version and i got it with eclair rom, and than updated with orignal T mobile froyo.
Now i should start from froyo or eclair?
cute_kayani said:
Okay, thanks for all.. this is the T Mobile Uk version and i got it with eclair rom, and than updated with orignal T mobile froyo.
Now i should start from froyo or eclair?
Click to expand...
Click to collapse
You may use any ROM either Froyo or Eclair. Please also check the downgradilbility of the ROM. As in many of the cases if the ROM is not fixed then switching back to the earlier versions is impossible without having the Nandroid backup. I suggest you to use the version which is officially released in your region.
ROMs can be downloaded from the below mentioned link:
http://and-developers.com/sbf:defy
Complete information about various SBFs at:
http://forum.xda-developers.com/showthread.php?t=966537
Hope this helps!
Happy Flashing!
i flash it with JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
and i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
what is this?
but when i connect usb ,rsd detect it..but this time no white led also.
I again flash it with JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Service1FF.sbf
successfully passed and message pop for reboots,but still black screen.
Rajneeshgadge17 said:
Hello there!
As you mentioned that you are not able to see other Recovery options like "Install from zip" etc. This is because you must be booting your phone into the Stock Recovery. For those extra options to come up we need to boot the phone into the Custom Recovery.
To boot into Custom Recovery:
1. Press power on button;
2. Notice when the LED light blinks "BLUE" color; press both the volume keys this time;
3. Now it should show you Custom Recovery options this time;
4. Select "Install from Zip" and flash the ROM you were trying to flash (Also refer to the ROM info if that has some special installation steps).
If the above steps does not resolves the issue then you can always flash you phone with the Stock ROM found in the following article named as SBF:
http://forum.xda-developers.com/showthread.php?t=1216982
[Note: Above mentioned article has all the information that a defy user needs. Thanks "Zephyrot" for that wonderful article.]
Hope that helps!
Good Luck!!
Click to expand...
Click to collapse
Tnx for post guy
Palestrino said:
Tnx for post guy
Click to expand...
Click to collapse
Thanks,
I tried but there was no blue led and flash it two time but now black screen is the hurdle.
please tell how to pass this.
While flashing there was message for successful status, and reboot but now when i press power button nothing happen. And neither goes into boot loader or recover.
Only RSD detects my phone for flashing, otherwise its complete dead....
ohhhoooooo MIUI Rom You ruined my DEFY (
cute_kayani said:
i flash it with JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
and i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
what is this?
but when i connect usb ,rsd detect it..but this time no white led also.
Click to expand...
Click to collapse
cute_kayani said:
I again flash it with JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Service1FF.sbf
successfully passed and message pop for reboots,but still black screen.
Click to expand...
Click to collapse
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Thanks Rajneeshgadge17..
When i press these buttons nothing is happening. and i charge up battery with universal charger, don't know what is wrong.
only RSd detect my phone when i plugin USB.. otherwise it seems completely dead.
can somebody help........
cute_kayani said:
can somebody help........
Click to expand...
Click to collapse
Refer this post = http://forum.xda-developers.com/showpost.php?p=24205029&postcount=2
What if I have balck screen in recovery mode as well?
Do you have any idea how to solve the same problem if the recovery mode does not start neither? Only RSDLite sees that the phone is connected. I can refresh the ROM but I did not find the right .sbf file yet. Do you know maybe which one would bring back the phone from death?
Thank you in advance!!
Rajneeshgadge17 said:
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Click to expand...
Click to collapse
Ryaren said:
Do you have any idea how to solve the same problem if the recovery mode does not start neither? Only RSDLite sees that the phone is connected. I can refresh the ROM but I did not find the right .sbf file yet. Do you know maybe which one would bring back the phone from death?
Thank you in advance!!
Click to expand...
Click to collapse
Try to find the latest stock rom from your region... and match with ur defy type... flash with rsd that would bring ur defy back
Sent from my XT535 using xda premium
Doesn't work for me
Rajneeshgadge17 said:
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Click to expand...
Click to collapse
Unfortunately it doesn’t work for me, my defy doesn’t react for any key combination. RSD Lite still discovers it I can flash any sbf’s. But I’m still getting black screen. The problem is that I don’t know which sbf I should use… Please help. I know I can’t brick defy but if I don’t know how to get back I’m almost there…
0lsztyN said:
Unfortunately it doesn’t work for me, my defy doesn’t react for any key combination. RSD Lite still discovers it I can flash any sbf’s. But I’m still getting black screen. The problem is that I don’t know which sbf I should use… Please help. I know I can’t brick defy but if I don’t know how to get back I’m almost there…
Click to expand...
Click to collapse
It seems an issue with the Kernel. May be you are flashing the Green lense Defy (MB525) with GB kernel (i.e. MB526 sbf).
Also check the Bootloader version and which Android version you were using.
Here is a list of all the SBF's for both versions:
http://forum.xda-developers.com/showthread.php?t=966537
Hope this helps.
PS:- I don't use Defy for a year now as I own a Nexus 4.
[SOLVED]
I rooted this, installed clockworkmod, then went and got an cm7 dated april something 2012 u8160 rom from psyke83 website.
installed it through clockworkmod install from sd card option with success (also clicked option to backup everything).
yet when phone reboots it hangs on the blue arrow in a circle spinning around, sometimes reboots n repeats but it never goes past that.
I have tried going into recovery mode holding down volume buttons and power
and I get 1 of 2 errors:
with sd card in:
firmware update
step 1/2
unpacking
update failed
with sd card out:
purple screen.
I am a first time android modder, can someone please, please tell me how to fix this. I can access the sd card with a reader if need be to put whatever files on it that I should.
Thank you.
Start the phone by pressing volume up + power OR volume down + power. You should be able to boot to recovery with one of those combinations (other one boots to fastboot most probably). After that do the wipe data/cache and try to reboot once again.
What was wrong in the beginning was that you did not wipe data/cache. That made the CM use old OS's data files which obviously won't work.
The unpacking thing was caused by pressing volume up + volume down + power. That causes the phone to go to upgrade mode if there is an update package found.
Nope. still goes to the blue arrow circling then freezes then reboots....
mrw187 said:
Nope. still goes to the blue arrow circling then freezes then reboots....
Click to expand...
Click to collapse
You are right about me not wiping the data/cache though...
But in your phone forum, are there tutorials on how to boot to recovery? Do you have any other hard keys on the phone?
there is one other button but that didn't work either.
I cannot find a forum for Huawei model u8180 (
mrw187 said:
there is one other button but that didn't work either.
I cannot find a forum for Huawei model u8180 (
Click to expand...
Click to collapse
Hmm, would this work?
yay!!
it was volume up + power + cancel button (? maybe home button? not sure on what this button is but its the biggest).
wiped all data n cache n then it booted properly.
So the problem is solved? If you can, mark first post title with [SOLVED].
Sent from my U8800 using Tapatalk 2
huaweiU8180 freeze on boot to recovery
I have tried all the solution but failed the problem is my HuaweiU8180 keeps on hanging wen I try booting to recovery mode now I can't format my phone and I can't install a custom ROM even when the phone is rooted and I hav ROM manager premium installed and I flashed CWM but still someone help me please
I triead a lot of thing, but cant downgrade to offical gingerbread, to update ISC.
I moment have latest Oxygen.
English is not my mother language, so can someone explain step by step with DL links, how to do this.
Scuall said:
Not good at english, but i try:
This is my story.
At first i tried install any stock rom, but cant get them installed, cause with 2gb sd, i get always pink screen.
Then tried put /dload into inner card, root directory. Installed Estonia Elisa (stock) like charm. Updated to 2.3.5 also, everything ok. but when tried to get back unlocked pinkscreen vith this tutorial
http://forum.xda-developers.com/showthread.php?t=1457490&page=6
then in my case, it just bootloop. Also as i remember, cant go to pink screen /image.
So installed ubuntu and there i can see partitions. Replaced recovery with newest, get all back. 2.3.5 (installed again), pink screen locked.
So i root phone as in tutorial, and replaced recovery into folder as writed in tutorial.
Then BAM! at first recovery screen (+ power) blue screen, and locked pink.
Then (+ power) stopped working. but pink still work.
But figured out how install firmware updates.
from inner card, no sd in slot - install (ofc. failes)but this method work.
with outer sd. SD in my case MUST BE 512mb only, so it will install. (failes in my case). with battery or usb cable - no effect
In linux cant see partition also and it shows just U8120 device instead of 8800
Totally messed up bootloader or partition. I dont know.
Thanks to my hero dancer_69 he somehow found that china page.
Downloaded http://filespart.com/dl/ds7ltr.html
putted into /dload that update what in archive. just only this file from zip.
and i got back unlocked pinkscreen. Replaced /image folder (jeah i had some backup)
Putted again 2.3.5 into outer sd card and installed as charm.
After that everything goes normal. As followed tutorial.
root, recovery, aurora.
After aurora was installed, i waited about 15 min and disconnected power.
after that factory reset and that it.
So if you cant install firmware update from sd card. Dont use 2gb or bigger. 512 works fine, instead of 2gb. or try differet cards.
Click to expand...
Click to collapse
Oxygen is .32 so it's upgrade if you install gingerbread.
Try to find B518 version of gingerbread because you don't need to root it. Just install CWM 5.5.0.4 and flash aurora ics.
So,
1. make folder "dload" to your external sdcard.
2. put update.app file in dload folder.
3. turn off phone and start it holding volume+ and volume- buttons and power button.
4. update should start
i have rooted ideos.
with - + power i get pink screen.
So i have B518 but its app, i dont know how o install it.
edit: or can u add me to msn: [email protected]
Edit: now i can only go to pink screen and just IDEOS screen, cant reach recovery .... deam, can someone help me ?
Scuall said:
i have rooted ideos.
with - + power i get pink screen.
So i have B518 but its app, i dont know how o install it.
edit: or can u add me to msn: [email protected]
Edit: now i can only go to pink screen and just IDEOS screen, cant reach recovery .... deam, can someone help me ?
Click to expand...
Click to collapse
Does this process the sequence of keys, but with the data cable connected to the pc ... thus enters update screen instead of pink
Sorry for the bad writing!
jes, entire screen is pink.
Scuall said:
jes, entire screen is pink.
Click to expand...
Click to collapse
So you're doing something wrong.
format the memory card into the PC again and put the folder inside dload ...
Then does it again as I said ... data cable connected to the pc ... vol +, vol- and power ... update has to get in that way!
ill try again after format.
using U8800V100R001C00B522G001 (Normal Gingerbread).zip
i do it right?
and i have B518-bootloader, think, it mess all.
Scuall said:
ill try again after format.
using U8800V100R001C00B522G001 (Normal Gingerbread).zip
i do it right?
Click to expand...
Click to collapse
Yes.
2.3.5 official
EDIT: You can see it in numbers ... B522 near the end ...
aaaand nothing. tried multiple times, entering only pink screen, can see only those 4 files, amss, boot, emmcboot, recovery :crying:
also still cant use recovery
Scuall said:
aaaand nothing. tried multiple times, entering only pink screen, can see only those 4 files, amss, boot, emmcboot, recovery :crying:
also still cant use recovery
Click to expand...
Click to collapse
You must copy recovery.img (5.5.0.4) over default recovery.img on the pink screen through USB. Then you can boot in to recovery (volume up + power)
Sent from my U8800
ok. now i get blue screen. ?
no, false alarm, still nothing, just IDEOS
Scuall said:
no, false alarm, still nothing, just IDEOS
Click to expand...
Click to collapse
Can you tell us what have you done and how you are trying to access recovery? Please be specific so that we can better help you...
http://forum.xda-developers.com/showthread.php?t=1457490
this one. after what i cant enter recovery.
to install updates, connecting usb (without batt) and pressing + - power.
Scuall said:
http://forum.xda-developers.com/showthread.php?t=1457490
this one. after what i cant enter recovery.
to install updates, connecting usb (without batt) and pressing + - power.
Click to expand...
Click to collapse
That doesn't give you recovery, that only restores unlocked bootloader for those who installed stock 2.3.5 higher than beta 1..
To install recovery, you must copy recovery.img v5.5.0.4 (it's in the dev section) over original recovery.img that's inside the "image" folder of the pink screen, using USB.
After that, start the phone pressing and keeping pressed vol + / power at the same time until recovery comes up.
i did it! tried also older ones, but nothing.
Scuall said:
http://forum.xda-developers.com/showthread.php?t=1457490
this one. after what i cant enter recovery.
to install updates, connecting usb (without batt) and pressing + - power.
Click to expand...
Click to collapse
Scuall said:
i did it! tried also older ones, but nothing.
Click to expand...
Click to collapse
Well, I don't know what else is failing... bear in mind that for recovery to boot you have to keep pressed vol + / power button simultaneously for quite a bit. Even if normal recovery doesn't show up, huawei's recovery should...
+ power - it shows IDEOS and shuts down after 15 sec.
Scuall said:
+ power - it shows IDEOS and shuts down after 15 sec.
Click to expand...
Click to collapse
Sorry, don't know how to help anymore... I suggest you install official stock 2.3.5 beta 1 again and copy recovery to pink more... maybe the bootloader tutorial you followed changed something.
Sent from my U8800
Try flashing official roms again
Sent from my U8800 using xda premium