Related
when it was on it said sd card damaged and i turned it off and now trying to turn it back on its just wont go past the hero screen
i have mytouch
plz help!!!
try and take out the sdcard
bro, can u enter fastboot mode by pressing back and power button or recovery mode by pressing Home + Power button..
if you can enter those two mode then u aren't brick! just flash the rom again..
lesjaw said:
bro, can u enter fastboot mode by pressing back and power button or recovery mode by pressing Home + Power button..
if you can enter those two mode then u aren't brick! just flash the rom again..
Click to expand...
Click to collapse
yes i can i tried flashing it but it wont read sd card and beside theres no rom on my sd card
the phone wont get pass hero screen what do i do
flash a new rom?!?!
maxisma said:
flash a new rom?!?!
Click to expand...
Click to collapse
but how? get a new sd card and a sd card adapter? put the rom in there? then try
flameinthefire said:
but how? get a new sd card and a sd card adapter? put the rom in there? then try
Click to expand...
Click to collapse
yes!....
REally not trying to be a ****, but how the hell do you think you bricked because your sd card was damaged? LOL
cuz he didn't do his reading, just like he didn't read what does and does not belong in development. This seems like it would be better suited to go in the general section.
tazz9690 said:
cuz he didn't do his reading, just like he didn't read what does and does not belong in development. This seems like it would be better suited to go in the general section.
Click to expand...
Click to collapse
ALright, before anything else, yes I did my research (going for 6 hours now). After managing to root my HTC magic (32 BNTT DOCOMO with perfect SPL 00006, donut) to Amon Ra's 2010 (S-H), I tried to downgrade my donut to cupcake. I've already flash my radio from 32A to 32B radio as recommended at Amon Ra's site. However when I was in the process of downgrading (I've downloaded the image from the HTC website (cupcake), all the checklist checked good with the exception of the SPL. CHecklist requires the Hboot for 2005 not 2010. In order to comply with the chechlist my d*mb ass just decided to flash the hboot(2005) and rebooted my phone w/out realizing the consequence.... So now my phone is stuck at boot logo for almost 3 hours with no fastboot access. Any takers???....
Hi Guys,
I have a 32B HTC Magic and have installed, via ROM Manager, ClockworkMod Recovery v. 2.5.0.1. However, when I select "Reboot into Recovery" I cannot get in - the Red Voda loading screen hangs forever (I need to battery pull to boot back into donut). Also, when I reboot my phone and hold down Home + Power, I get the stock recovery with only 4 options.
What am I doing wrong?
I believe I need to get into recovery mode to flash (1) the new radio to run CM6 and (2) the SPL (kind of like a bootloader?).
Thanks, I'd appreciate any help I can get on this!
If you can get me up and running on CM6, I'll gladly show my appreciation via the donation page.
me to I have cm 6 I have only hboot mode
Sent from my HTC Magic using XDA App
itaios said:
me to I have cm 6 I have only hboot mode
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
How'd you get CM6 on your Magic without the new radio or SPL?
Same problem here, "Reboot into recovery" does not work more.
When I try use it, red vodafone screen enter in do forever
Some solution?
I would try to load amonra instead of clockwork. Clockwork gave me the same problem however amonra was flawless. You can install amonra with the rom manager. Hope this helps.
Sent from my T-Mobile myTouch 3G Slide using XDA App
my phone wont come off the the spalsh screen, even when i try to bootinto recovery or fastboost its just stuff on the green screen and the pixels are funny for some reason. i dont know exactly what i did but i tried to flash a new radio and spl is there any hope?
itsomaryo said:
my phone wont come off the the spalsh screen, even when i try to bootinto recovery or fastboost its just stuff on the green screen and the pixels are funny for some reason. i dont know exactly what i did but i tried to flash a new radio and spl is there any hope?
Click to expand...
Click to collapse
You can't get into bootloader at all?
If you can't get into bootloader or recovery then yes... you are bricked.
What did you do?
im not trying to hijack this thread but i didnt want to create a duplicate. mine also gets stuck on the splash screen. It wont load my recovery files and the adb interface on my computer wont work. im at a loss. Previously it was rooted with cyanogen mod 6.0
bassdroid said:
im not trying to hijack this thread but i didnt want to create a duplicate. mine also gets stuck on the splash screen. It wont load my recovery files and the adb interface on my computer wont work. im at a loss. Previously it was rooted with cyanogen mod 6.0
Click to expand...
Click to collapse
can you get in to the SPL? (vol - and power)
AdrianK said:
can you get in to the SPL? (vol - and power)
Click to expand...
Click to collapse
yes. i can do vol- and power and the white screen comes up with radio and spl showing.
I don't know what did but I fixed it. All I did was keep trying to flash the newest cyanogen rom and I wiped all caches and somehow it finally took I am sending from it now. But my hd2 will still remain primary phone
Sent from my HTC Magic using XDA App
I did it through the h boot and installed zip from sd card
Sent from my HTC Magic using XDA App
How did you do it?
bassdroid said:
I did it through the h boot and installed zip from sd card
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
Hello,
How did you do it? I cannot pass the splash screen but I can enter the FASTBOOT menus with the 3 skaters
Thanks
All I did was wrote every cache and try installing a fresh rom a few times and somehow it worked. I was kinda surprised myself.
Sent from my Nexus One using XDA App
my solution on 10 second your magic will be alive (100% PROVEN & TESTED)
if u have problem with your magic (stuck on logo screen) maybe my solution it's work...
pls see this video make sure you condition same like this
youtube.com/watch?v=hPoxMzm0MVU&hd=1
Pls follow my sollution (it work on my magic) for fix your magic first u don't panic because your magic will be have the recovery on the internal disk. u should be only recovery rebort your magic to earlier condition before your magic stuck on logo boot screen.
1.put off your magic battery (5 second) then put on again.
2.pls hold home button and then hold off button (power on) "until u see the screen cyanogen recovery bootloader" and then it's automaticly booting and pls chooses rebort recovery then recovery will started.
3.after that your magic freezed on recovery clockworkmod.
4.put your battery off on your magic and put on again.
5.your magic will be back alive
pls responsed my solution
Hey guys, I've managed to install MAGLDR on my HD2, and I have tried to install CWM.
First I tried v1.3 and everything went OK till i got stuck on the "Go Go Go" screen.
Then I tried v1.2 using my SD card, but i still end up with the same problem.
The thing is I don't have any ROM installed on my HD2 so I can't do anything more !
Would greatly appreciate your help =)
do you use MAGLDR 1.13?
did you try and reinstall your ROM?
Do you use a compatible radio?
Yep I'm on 1.13
I can't do much more, my HD2 won't even boot into the bootloader ! I'm basically stuck on MAGLDR with no ROM and no ability to install back a standard windows ROM
Eelkede said:
Do you use a compatible radio?
Click to expand...
Click to collapse
I followed the steps carefully, so it should be OK but how can I be sure ?
Make sure your battery pins aren't loose. Push them back with your finger and try again.
Sent from my HTC Vision using XDA App
Tried about everything I could hardware-wise without tearing it apart... unfortunately the battery pins don't change anything.
Quite a few members seem to be facing the same problem recently: no access to the bootloader, stuck on MALDR... wonder what's the problem.
The only thing I can do is run WP7 on it, which is not very usable.
i made this: http://forum.xda-developers.com/showthread.php?t=945427
maybe it helps?
Thanks yz.hd but I can't get to the bootloader (volume down + power only brings me to MAGLDR), nor CWM...
It's not possible to only be able to get to MAGLDR and not bootloader I don't think. Just hold down the volume button and then power on while still holding down the power button and see what happens. I had a problem like that where my HD2 would get stuck at "1234" and then stopped and rebooted. The battery pins where the cause.
Sent from my HTC Vision using XDA App
I've tried loads of times, the combo volume down + power really doesn't bring anything up, no matter which way I put it... a complete mystery !
So you've tried to install CWM? Did it work or not? Are you able to go to the USB flasher in Magldr? And install it again, try to see if the AD Recovery works?
Yep, I tried again, the USB flasher works perfectly fine, CWM installs perfectly. But when I go to Ad recovery, it still stays on "Go Go Go!".
Same thing if i install CWM via my SD card
Try formatting SD card (you will lose your data). Try again.
How long does it hang?
If that doesn't work, try to install a DAF rom, and see what happens.
you probably don't have the 'copy to sd' folder in the root of your sd?
Sent from my HTC HD2 using XDA Premium App
Eelkede said:
Try formatting SD card (you will lose your data). Try again.
How long does it hang?
If that doesn't work, try to install a DAF rom, and see what happens.
Click to expand...
Click to collapse
What do you mean by a DAF Rom ? One that is directly bootable from MAGLDR ? I have tried a WP7 rom which works ok. But I still can't install a bootloader to bring it back to WP 6.5 and start the process all over again to install CWM...
@DKxda: is it necessary to have a folder ? I copied the two files directly in the root of my SD.
DAF rom is a rom that doesn't use CWM to run (directly from magldr).
Nope I'm still stuck on Go Go Go if I want to install a DAF Android ROM (no problem with WP7 ROMs though)...
Sorry mate, I'm out of options you could try (well, install CLK, but you need the bootloader for that...)
Hope someone else will help you fix this!
Edit: When does it get stuck at go go go? Immediately at boot or after selecting Boot AD Nand?
You can try to ask it in the Magldr Thread, cause it seems like a Magldr problem to me...
Eelkede said:
Sorry mate, I'm out of options you could try (well, install CLK, but you need the bootloader for that...)
Hope someone else will help you fix this!
Edit: When does it get stuck at go go go? Immediately at boot or after selecting Boot AD Nand?
You can try to ask it in the Magldr Thread, cause it seems like a Magldr problem to me...
Click to expand...
Click to collapse
Well, since yesterday I'm getting a similar issue!
Stuck at go go go or just after on the boot screen which is completely messed I get the top 1/4 screen ok, the rest is bad lines, then the bottom half is dark.
Yesterday I tried installing a CM7 build for my HD2... stuck at Android logo...
So I reflashed CWM Recovery 400Mb partition ok, restored my last backup and rebooted... Now I have this issue all the time!
Tried my many backups, reflashing CWM Recovery a couple of times, factory reset from CWM or MAGLDR...
Nothing will do!
Is my HD2 dead or what????
any info on when this will be available for the hd2
i broke the volume ribbon cable so i cant navigate through magdlr
watercooled223 said:
any info on when this will be available for the hd2
i broke the volume ribbon cable so i cant navigate through magdlr
Click to expand...
Click to collapse
Search before posting
Munjeni's Touch recovery.
thanks.
is the touch available in the magdlr to navigate to recovery as both my volume buttons dont work ?
watercooled223 said:
thanks.
is the touch available in the magdlr to navigate to recovery as both my volume buttons dont work ?
Click to expand...
Click to collapse
If your volume buttons are broke you definitely should switch to cLK with touch recovery and you'll never have to worry about it again since you use the home button long press while rebooting to go into recovery, and in cLK you can use quick boot app or rom manager or power menu to reboot into recovery. Is super easy to install with the hd2 toolkit.
Sent from my 1.8ghz Galaxy Note!
roloracer said:
If your volume buttons are broke you definitely should switch to cLK with touch recovery and you'll never have to worry about it again since you use the home button long press while rebooting to go into recovery, and in cLK you can use quick boot app or rom manager or power menu to reboot into recovery. Is super easy to install with the hd2 toolkit.
Sent from my 1.8ghz Galaxy Note!
Click to expand...
Click to collapse
thanks
can you point me to a guide for that as i have never used cLK
watercooled223 said:
thanks
can you point me to a guide for that as i have never used cLK
Click to expand...
Click to collapse
Haha please search.. or check my sign.
Sent from my HTC HD2 using xda premium
problem, , , clk is flashed from bootloader, bootloader is accessed by using volume....
what should i do as i cant use the volume buttons ?
i am currently on the ics tosti
watercooled223 said:
what should i do as i cant use the volume buttons ?
i am currently on the ics tosti
Click to expand...
Click to collapse
Hmm try plugging it into your computer and try flashing im not sure but on winmo the RUU would automatically put it into bootloader
elesbb said:
Hmm try plugging it into your computer and try flashing im not sure but on winmo the RUU would automatically put it into bootloader
Click to expand...
Click to collapse
Only works under winmo, requires winmo drivers to be active, which isn't the case when android is running.
@op, your solution is to fix the volume keys.
samsamuel said:
Only works under winmo, requires winmo drivers to be active, which isn't the case when android is running.
@op, your solution is to fix the volume keys.
Click to expand...
Click to collapse
can they be hard wired ?
Sorry, no clue, never had one apart. Perhaps you could dismantle it, make the connection long enough to flash? Be warned though, many people end up breaking more, the hd2 is not easy to take apart without damage.
Well the touch recovry works with magldr too, you don't meed clk for that, but you still won't be able to use recovery.
Have you tried the htc hd2 nand toolkit? i think i heard it has an "express mode" where it install everything without you doing anything, so maybe you won't need the buttons?!
Worth a try i'm guessing.
Good luck
JimWest7997 said:
Well the touch recovry works with magldr too, you don't meed clk for that, but you still won't be able to use recovery.
Have you tried the htc hd2 nand toolkit? i think i heard it has an "express mode" where it install everything without you doing anything, so maybe you won't need the buttons?!
Worth a try i'm guessing.
Good luck
Click to expand...
Click to collapse
if i can use the touch recovery in magldr then why cant i use recovery ?
im already running android
watercooled223 said:
if i can use the touch recovery in magldr then why cant i use recovery ?
im already running android
Click to expand...
Click to collapse
my bad, thats not what i meant, sorry. i meant the touch recovery works on magldr too, you don't need clk to get touch-recovery, but you won't be able to get past magldr itself in order to get to recover (sorry, english isn't my primary language, i hope you know what i mean). have you tried the nand toolkit?
am i able to go back to windows mobile ?
sorry, cant tell you anything about winmo, haven't used it since first android built came out (a year ago?), hope you'll find the help you're looking for
ok thanks.
does anyone know if i can get windows back on the hd2 with the volume buttons working ?
update...
i stripped the phone down and got a screwdriver on the torn volume button and have navigated to recovery..
now does clk support rom manager from the market place as with that can i select to boot up to recovery and bootloader ?
or is that not possible ?
watercooled223 said:
update...
i stripped the phone down and got a screwdriver on the torn volume button and have navigated to recovery..
now does clk support rom manager from the market place as with that can i select to boot up to recovery and bootloader ?
or is that not possible ?
Click to expand...
Click to collapse
Yes and no! You can use Rom manager to boot into recovery but not into bootloader since it doesn't have an android bootloader Rom manager won't find it. If you were able to rigg the buttons while the phone is apart, I suggest make sure you have plenty of battery and reboot while pressing the volume down and when you see the tricolor screen, keep it there, plug it into the pc and open the hd2 toolkit and install cLK and then I would suggest to put the touch recovery img file into the toolkit so you can flash it while setting it up, there should be instructions in the touch recovery thread on how to add the recovery.img to the toolkit.
Sent from my 1.8ghz Galaxy Note!