Related
Hi all,
I managed to brick my device during radio upgrade (check my last post on http://forum.xda-developers.com/showthread.php?t=632869&page=2) so now my magic is showing some picture after powering on which i do not understand what it means - after few seconds this picture blacks out and that's it (display is lit but it is black).
Fastboot, recovery and goldcard process are not available.
Help is appreciated, and also suggestions to revive it as well.
P.S. I tried to give it to the service, they said "Tampered boot" and returned the unit back to me as is so I am on my own here :-(
over 100 reads and no answers? C'mon people, I am sure that there has got to be someone who knows what this picture means
The picture is a system screen. It's in the background while updating roms and what not. What version of android are you running and can you get into any boot screens ie. powering on using back and home at the same time?
To be quite honest I do not know which version of android was on before - i just know that it happened during uploading radio 6.35.08.29.
Back + Home + Power on shows same picture.
If I put same radio as update.zip on the SD card would it have any sense??
mjagar said:
To be quite honest I do not know which version of android was on before - i just know that it happened during uploading radio 6.35.08.29.
Back + Home + Power on shows same picture.
If I put same radio as update.zip on the SD card would it have any sense??
Click to expand...
Click to collapse
Well it's been a while for me, but it seems like that pic is from the original recovery, you require amon's recovery.
Have you gone through the steps from Cursordroid, upgrading/downgrading SPL and Radio? Follow his procedure, grab all the correct files and use Fastboot.
Bedeadu said:
Well it's been a while for me, but it seems like that pic is from the original recovery, you require amon's recovery.
Have you gone through the steps from Cursordroid, upgrading/downgrading SPL and Radio? Follow his procedure, grab all the correct files and use Fastboot.
Click to expand...
Click to collapse
Can't use fastboot because i cannot bypass this part with boot picture :-(
I also noticed this thread: http://forum.xda-developers.com/showthread.php?t=632102 - exactly happened to me, semms like this radio version 6.35.08.29 when uploading from SD card is bricking a phone sometimes - BEWARE !!!
Please explain how to do recovery from cursordroid - have in mind that I only have SD card, I cannot reach fastboot, recovery or anything... If it can be done by putting some files to sdcard please describe it and if successfull i am buying beer... Hell, if it works i might introduce you to my younger sister ;-)
As you now have a 6.35* radio, can you do this?
Code:
adb shell
flash_image hboot hboot-1.76.2007.img
sindrefyrn said:
As you now have a 6.35* radio, can you do this?
Code:
adb shell
flash_image hboot hboot-1.76.2007.img
Click to expand...
Click to collapse
"error: device not found"
A few days ago my 32a did the same thing. I tried to use fastboot and didm't work. I had 6.35 radio and I had updated it like it said in the instructions.. I took the batery off several times, and it booted properly.. Try to do that.. Sorry for my english..
Sorry for my bad english ,
It's happen to me too. Yesterday I had my friend’s htc magic . He gave me that because he said that it was briked. When I press back+power or voldown+power or home+power , the result is same like picture in first post.
no adb and fastboot worked . How about you ? Is your phone normal again ?
thanks before .
Hi, no unfortunatelly my phone is still bricked - i removed baterry at least hundred times but no change... :-(
mjagar said:
Hi, no unfortunatelly my phone is still bricked - i removed baterry at least hundred times but no change... :-(
Click to expand...
Click to collapse
I think your phone is 99% bricked. Press hang + back, if you can entry hboot mode. Then try the attachment files.
Please be sure your phone is rooted and not perfect SPL.
GOOD LUCK!
View attachment 292085
View attachment 292095
View attachment 292096
View attachment 292098
hm.....that pic was displayed after I upgraded Radio, too. but then it was back to recovery mode, and I reboot & my phone work normaly w radio updated... So I think it's not danger pic :-?
once youre in that recovery mode, if you hit the home + back again anything happen?
i know if i get that screen on the Dream, I hit home +back again it changes my screen with options.. On your phone it may be vol dn + home try it out, mine gives me the option to flash update.zip from my SD card again.
Unfortunatelly I cannot get to hboot (home + red button), nor fastboot (back + red button) nor even volume DN + redbutton...
Looks like it is bricked 100%.
So guys, be carefull when upgrading radio 6.35.08.29 :-(
mjagar said:
Unfortunatelly I cannot get to hboot (home + red button), nor fastboot (back + red button) nor even volume DN + redbutton...
Looks like it is bricked 100%.
So guys, be carefull when upgrading radio 6.35.08.29 :-(
Click to expand...
Click to collapse
Read carefully and follow the instruction here: http://forum.xda-developers.com/showthread.php?t=605239
then i don't think there is to much to worry about!
For me it sounds like you updated the radio and restarted the mobile before updating the SPL. OR you forgot to check the m5dsum of the radio and flashed a broken radio file to your mobile.
It's IMPORTANT that you guys remember to check md5sum of the files before flashing em cause a broken radio/spl file can brick the phone!
same pictrue on my magic
My magic have same picture. I try to study Android for help it.
I see more and more threads like this and no movement in direction which could unbrick the phone without changing the motherboard...
Seems like I'm in the same situation as the OP. Got the same picture and can't do anything about it.
Hi xda,
I'm sorry if this is a "common" error, but I couldn't find a thread via google or the search function - If I'm just an idiot, SORRY.
The problem is, that my little brothers HTC Magic is failing on boot. The screen keeps on showing the logo for HTC Hero. - Then he tells me that his friend told him that the Hero rom were a better choise, so the friend TRIED to flash the hero rom over at the magic, but now it loops the logo.
My questions is :
1) Is the hero rom a better rom for the Magic?
2) How do I get it to work again?
Is it rooted?
Can you get into recovery?
Can you get into fastboot?
What radio, hboot and recovery are on the phone?
If you or your brother don't know what those things are then you've got some reading to do. Google those words or search in this forum. Once you understand what those things do or if you already know, then report back.
patrickpetersen said:
Hi xda,
I'm sorry if this is a "common" error, but I couldn't find a thread via google or the search function - If I'm just an idiot, SORRY.
The problem is, that my little brothers HTC Magic is failing on boot. The screen keeps on showing the logo for HTC Hero. - Then he tells me that his friend told him that the Hero rom were a better choise, so the friend TRIED to flash the hero rom over at the magic, but now it loops the logo.
My questions is :
1) Is the hero rom a better rom for the Magic?
2) How do I get it to work again?
Click to expand...
Click to collapse
U need to clear about the Hero ROM you flashed. Original Hero ROM can not run in Magic, only Cooked Hero ROM can.
Also, If u flash cooked Hero ROM for Magic, u may need the recovery for this ROM (usually suggested by the dev)
ntphuong said:
U need to clear about the Hero ROM you flashed. Original Hero ROM can not run in Magic, only Cooked Hero ROM can.
Also, If u flash cooked Hero ROM for Magic, u may need the recovery for this ROM (usually suggested by the dev)
Click to expand...
Click to collapse
It wasn't me who did the flash , but my brother classmate and he's suddenly in doubt.. He told he flashed the phone, then made a hard reset and then it started looping. If he can't tell me which Rom he used is there any way to find it?
Sent from my Xperia x10 using Tapatalk
giant_rider said:
Is it rooted?
Can you get into recovery?
Can you get into fastboot?
What radio, hboot and recovery are on the phone?
Click to expand...
Click to collapse
If recovery is pressing BACK+POWER, than yes At that screen it say:
SAPPHIRE PVT 32 A ENG S-OFF H HBOOT-1.33.2010 (SAPP10000) CPLD-12 RADIO-3.22.29.17
When I choose fastboot (HBOOT?) It's trying to load some images, but fails.
Sent from my Xperia x10 using Tapatalk
Recovery is home+power. Try it, if still run, u can download the Magic Rom with 3.22 radio.
If not, Download recovery Magic of RA or Seo,... use fastboot to flash the recovery image.
Or u can download official ROM and flash it.
Good luck
Sent from my Gingerbread on Sapphire using XDA App
The problem is : how do I flash it, when there isn't a propper USB connection? When Im at the recovery screen and Im trying to push the image it says no device to be found.. :/
Sent from my Xperia x10 using Tapatalk
I think u should download the original ROM like sapphire.img, put it into sd card, start the phone in Hboot and it will automatically find the img file to flash.
Sent from my Gingerbread on Sapphire using XDA App
ntphuong said:
I think u should download the original ROM like sapphire.img, put it into sd card, start the phone in Hboot and it will automatically find the img file to flash.
Sent from my Gingerbread on Sapphire using XDA App
Click to expand...
Click to collapse
Where can I find the original ?
Wrong section!
Do NOT post in Development unless you have developed something!
patrickpetersen said:
Where can I find the original ?
Click to expand...
Click to collapse
this is RUU file , u can run it from Windows , just connect your phone to USB.
http://forum.xda-developers.com/showthread.php?t=659403
If u don't have gold card, U need to check your CID b4 download the original ROM.
http://forum.xda-developers.com/showthread.php?t=631519
If u have gold card, u can try any ROM u want.
ntphuong said:
this is RUU file , u can run it from Windows , just connect your phone to USB.
http://forum.xda-developers.com/showthread.php?t=659403
If u don't have gold card, U need to check your CID b4 download the original ROM.
http://forum.xda-developers.com/showthread.php?t=631519
If u have gold card, u can try any ROM u want.
Click to expand...
Click to collapse
The USB connection with his computer isn't working so he won't be able to just run the RUU. He'll need to extract the sappimg file from the RUU, put it on his SD card via an adapter, and flash it from hboot on the phone.
With that being said, @the OP, still grab your CID and let us know which country the phone originates from. Then I'll pull the file you'll need and post it back here for you to download with instructions on how to use it.
DonJuan692006 said:
The USB connection with his computer isn't working so he won't be able to just run the RUU. He'll need to extract the sappimg file from the RUU, put it on his SD card via an adapter, and flash it from hboot on the phone.
With that being said, @the OP, still grab your CID and let us know which country the phone originates from. Then I'll pull the file you'll need and post it back here for you to download with instructions on how to use it.
Click to expand...
Click to collapse
Thanks! - It's bought in Denmark, so I think it's the Nordic rom
patrickpetersen said:
Thanks! - It's bought in Denmark, so I think it's the Nordic rom
Click to expand...
Click to collapse
Wait, just realized that link require that you be able to boot into the ROM. So, we're going to take the plunge. If your wrong, the file just won't flash, so no worries about bricking.
Go here and download that file. Rename it to "sappimg.zip" and put it on your SD card. With the SD card in the phone and the phone turned off, boot into hboot holding (volume down+power). The phone will pick up the image and ask you to hit "ACTION" to continue (ACTION is pressing the trackball in). Press "ACTION" to flash the file, after its done (will take about 5 minutes) it'll ask you to hit "ACTION" again to reboot. Do that and you'll be back stock.
Sent from my LG-P500 using Tapatalk
Hey DonJuan692006
I have the same problem
Can't boot into bastboot
Devices not recognized (USB)
I would like to try your method : French Magic 32B
Well I found a link (96.03 MB)
Put it on SD Card, but didn't work, still frozen with the boot screen
ben00ze said:
Hey DonJuan692006
I have the same problem
Can't boot into bastboot
Devices not recognized but USB
I would like to try your method : French Magic 32B
Click to expand...
Click to collapse
So you can't get into hboot by holding (volume down+power) to boot? If not, can you get into recovery by holding (home+power) to boot?
Nope
I tried :
Down Volume + Power : Frozen on boot logo
Back + Power : same result
Home + Back + Power : same result
TrackBall + Power : black screen with blue led
ben00ze said:
Nope
I tried :
Down Volume + Power : Frozen on boot logo
Back + Power : same result
Home + Back + Power : same result
TrackBall + Power : black screen with blue led
Click to expand...
Click to collapse
Sorry but your phone is bricked.
Sent from my LG-P500 using Tapatalk
So, there is no solution ?
Warranty is now finished ...
my htc hd2 is bricked, the screen is stuck at the white tmobile screen.
However, i can get to the red, green, blue, and white screen.
i read a comment on a old thread, there was a way to fix it, but they didn't post the comment. So is there a way to fix my hd2?
more details on how it might be bricked.
i left my phone uncharged causing it freeze, so i reset it.
that when i took out the battery and ever since
when i try trying it on, it stood in the white tmobile screen.
thi713 said:
my htc hd2 is bricked, the screen is stuck at the white tmobile screen.
However, i can get to the red, green, blue, and white screen.
i read a comment on a old thread, there was a way to fix it, but they didn't post the comment. So is there a way to fix my hd2?
more details on how it might be bricked.
i left my phone uncharged causing it freeze, so i reset it.
that when i took out the battery and ever since
when i try trying it on, it stood in the white tmobile screen.
Click to expand...
Click to collapse
First off your HD2 is not bricked. If it wax bricked it would not so much as turn on.To save your HD2 do one of these two things.
Download the official update from T-Mobile.com. Look behind your battery to find your IMEI number to enter. Next make sure your HD2 is good and charged I know this is hard as it will not boot but just let it charge for a good while as you do not want the battery to die during either method of flashing. Now while the phone is off hold the volume down button down and press the power button but keep holding the volume down button down. When the phone is in bootloader(multicolor screen) connect your phone to the computer via USB and wait for Serial in the white bar of the bootloader screen to change to USB and for your computer to show it recognizes your phone then right click on the update package and click run as administrator and run the update utility. This should flash the stock ROM but if you have MAGLDR you will loose it and if you have HSPL you might lose it.
Now the secound option you have is to right click on the update package and click on view or explore wich ever one you see and find the RUU_signed.nbh file and rename it to leoimg.nbh or LEOIMG.nbh as it is not case sensitive. Then take a 500MB to 4GB SD card that is formated with Fat 32 and place it into a USB SD card reader and plug it into a USB port on your computer. If you are not sure about the format. Go to "My Computer" and find the card reader, it will be a removable drive or a mass storage device (make sure to make a back up copy of the intior contents of the SD card first as it will wipe the card clean)and right click on it and click format and then Fat 32. Copy the leoimg.nbh file to the root of the SD card. After coping it to the SD card place the card in your phone and put it into bootloader the same as mentioned above but keep the volume down button held down until you see searching on the phone screen and then let the volume down button go. You will have to press the power button to comfirm it. This should flash your phone to complete stock as it will remove MAGLDR, CWM, and HSPL if you have it on your phone.
There is other options to but I highly suggest going back to stock and then starting back over again as to me it just simplifies things some. Also seeing as you have a T-Mobile HD2 do not flash a radio that looks like any of these 2.04.50.xx, 2.05.50.xx, or any radio like this 2.xx.51.xx as any of these radios will brick a T-Mobile HD2.
after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?
thi713 said:
after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?
Click to expand...
Click to collapse
Yes you can reflash a Andriod ROM if you go back to stock but you would have to flash HSPL 2.08 again, flash MAGLDR 1.13 again, and CWM if you want to use it.
If you just want to flash another Andriod ROM just turn your HD2 off and then turn it back on button keep the power button down until the main menu of MAGLDR comes up (that is if you already have MAGLDR on your HD2) and then follow the instructions from the Andriod ROM on how to flash it using MAGLDR or CWM if you have it.
If you do not have HSPL and MAGLDR on your HD2 uou will have to flash both to hour HD2 befor you can flash a Andriod ROM. To flash these do this but your HD2 into bootloader (muticolor screen) and connect it to your computer via USB cable and wait to see USB in the white bar of the bootloader screen and that your computer recognizes your HD2 then flash wichever one you are wanting to flash. You will have to do this for every individual thing you want to flash. You also need to flash HSPL 2.08 first then MAGLDR 1.13 and then CWM if you want it.
thi713 said:
after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=653614
read this post it will help you to install android dont end up bricking your phone
i have a lot of problems using the magldr, for example i am not able to find a rom that works for me. some of the roms i tried to install won't work. can someone refer a rom that has great battery life? Another problem is that it keep freezing withever i try to boost a rom up. Any answers for that? is there another way for me to flash an android rom without using magldr?
thi713 said:
i have a lot of problems using the magldr, for example i am not able to find a rom that works for me. some of the roms i tried to install won't work. can someone refer a rom that has great battery life? Another problem is that it keep freezing withever i try to boost a rom up. Any answers for that? is there another way for me to flash an android rom without using magldr?
Click to expand...
Click to collapse
No you have to have MAGLDR to install Android. Try installing Clock Work Mod (CWM) and use it to install your Andriod ROM. Just do a search for Clock Work Mod for HTC HD2. Then read and follow the instructions in the ROM thread to use CWM to flash it.
i have a few problems when trying to install any rom using magldr.
First, whenever i boot up to the magldr screen, sometime it will freeze and i have to take out my battery.
Second, When installing a rom, it gets stuck at "the booting android from nand 123456 go go go" screen.
What could be wrong with my magldr, i already tried to re-installing it and it still acts up.
thi713 said:
i have a few problems when trying to install any rom using magldr.
First, whenever i boot up to the magldr screen, sometime it will freeze and i have to take out my battery.
Second, When installing a rom, it gets stuck at "the booting android from nand 123456 go go go" screen.
What could be wrong with my magldr, i already tried to re-installing it and it still acts up.
Click to expand...
Click to collapse
Take your SD card out of your HD2 and then boot it up and see if you still have the problem. If it is gone you need to back up your SD card and do a full wipe of it and reformat it using your computer and a SD card reader. Format it Fat 32.
T-Macgnolia said:
Take your SD card out of your HD2 and then boot it up and see if you still have the problem. If it is gone you need to back up your SD card and do a full wipe of it and reformat it using your computer and a SD card reader. Format it Fat 32.
Click to expand...
Click to collapse
i tried that, and it seem to work, but it still often freezes on me during usage. For example, when i am on the android market, it tends to freeze up. is there any way i can fix this? and can you recommend me an android build that doesn't have this problem?
thi713 said:
i tried that, and it seem to work, but it still often freezes on me during usage.
Click to expand...
Click to collapse
Run a task 29 on your HD2 then reclash MAGLDR and see if this helps it should, unless you have some bad boot sectors.
damn, i also tried that too, but it still freezes on me. i think i have a bad boot sector, how do i fix this?
thi713 said:
damn, i also tried that too, but it still freezes on me. i think i have a bad boot sector, how do i fix this?
Click to expand...
Click to collapse
Well you can not fix bad boot sectors persay witbout replacing the NAND memory chip which acrually requires the replacment of the intior mainboard of your HD2. Because you can not just replce the chip cause of the wah the mainboard is made. Wht you can do is use a JTAG device and some special software to go in and mark those sectors as bad so the phone will no longer try to use those sectors.
So I broke the digitizer on my HD2 and I replaced it well I ripped off the volume controls because I wasn't paying enough attention so now I am screwed because I flashed a custom rom to the phone and then I installed magldr.
Now my phone only will boot into magldr and I cannot select anything or flash anything else because I cannot scroll using the volume keys..
The cheapest I can find the part to fix my volume is $60 and I do not have it... So I am trying to figure out if there is a way I can get magldr off the phone so that it will boot back into windows it should still be there I just cant boot to it...
The other option is can I put android or windows on an sd and will magldr boot it because when it starts it gives an error about not being able to boot off the sd because i dont have a card in there...
I have searched and read and I can't find a solution for this because my volume button does not work that is really screwing me but I need my phone.
Please help!
maddogpc said:
So I broke the digitizer on my HD2 and I replaced it well I ripped off the volume controls because I wasn't paying enough attention so now I am screwed because I flashed a custom rom to the phone and then I installed magldr.
Click to expand...
Click to collapse
It is not clear from your post, did you flash MAGLDR before or after you accidentally broke your volume keys?
maddogpc said:
Now my phone only will boot into magldr and I cannot select anything or flash anything else because I cannot scroll using the volume keys..
Click to expand...
Click to collapse
Correct you no longer have the required fuctions to interface with MAGLDR, or boot into bootloader. Thus you can not flash Win Mo via SD card or USB, flash CWM via option#4 USB Flasher in MAGLDR, flash a Android ROM via CWM or option #4 USB Flasher, or even flash cLK (which you could use fastboot commands to flash a Android ROM to but not for the faint of heart).
maddogpc said:
The cheapest I can find the part to fix my volume is $60 and I do not have it... So I am trying to figure out if there is a way I can get magldr off the phone so that it will boot back into windows it should still be there I just cant boot to it...
Click to expand...
Click to collapse
Not correct, Windows Mobile is no longer on your HD2 at all. Win Mo was rcompletely removed when you flashed MAGLDR.
maddogpc said:
The other option is can I put android or windows on an sd and will magldr boot it because when it starts it gives an error about not being able to boot off the sd because i dont have a card in there...
Click to expand...
Click to collapse
This I do not know for sure if it will work or not because I do not know the defualt settings for MAGLDR. If it is set to boot from SD card on boot then yes placing a SD card Android build on your SD card in theory should work. It is worth a shot. just make sure it is a MAGLDR compatible Android build, it is several of them now. Also be sure to read the instalation or booting instructions in the first 1 to 3 posts of the build thread.
maddogpc said:
I have searched and read and I can't find a solution for this because my volume button does not work that is really screwing me but I need my phone.
Please help!
Click to expand...
Click to collapse
Maybe the SD Android will work for you, wish you luck.
Oh yeah i have got to stop accidently hitting the thanks button instead of the quote button. lol
I attempted to duplicate this and no luck.
Sent from my HTC HD2 using XDA Premium App
Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!
calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??
ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%
do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse
demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
your phone turned off??? is your battery dead??
orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?
Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please
You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk