Edit: I give up, I can't seem to get full linux running on my webtop... Even after checking so many guides...
So if someone (Flashahloic or Someone with a Rom that has nothing on and it Ubuntu on their webtop) could please do a complete backup of their Atrix (Including /osh) and uploading it for me...
Don't flame... If you can't do it then don't post... Or you can explain from the start how to do it? Thanks...
I don't want to be a jerk, but why you don't do it yourself?
Once you flash the 4.5.91 SBF you can't downgrade. If I try to flash the 1.8.3 SBF I'll brick my phone, so fruit cakes is the only way to downgrade, and Sam hasn't uploaded the 1.8.3 Fruit Cake with Webtop yet...
Alaq said:
Once you flash the 4.5.91 SBF you can't downgrade. If I try to flash the 1.8.3 SBF I'll brick my phone, so fruit cakes is the only way to downgrade, and Sam hasn't uploaded the 1.8.3 Fruit Cake with Webtop yet...
Click to expand...
Click to collapse
He has the 1.83 system and boot up (been there for awhile). But you're right there's no webtop. But using FCM wouldn't matter since /osh isn't included in the .zip it generates.
Also, you'll notice that none of his fruitcakes have webtop bundled with system and boot. Each one is a separate file.
Your right... How can I get the 1.8.3 Webtop then?
Rip apart the 1.8.3 sbf using Moto sbf De-packer, I think it was cg61 or cg65 I don't remember but there is a sbf guide if you search through the pudding links that lay out the cg files to which partition and your wrong you can downgrade you just need a pudding boot loader loaded sbf file which is also available through pudding, if you flash it 50/50 I have gotten a boot loop on my end ionoe but no bricking you can grab the osh partition through adb by flashing romancers recovery after the flash and use
dd if=/dev/block/mmcblk0p13 of=/sdcard/osh.img bs=131072
to grab that webtop though I doubt youll get it working with a ginger based rom.
I got no luck with any of the methods... Thanks for helping though Djazin!
OP updated!
Related
I have not installed any leaks after the last official SBF (Stock 2.2). If I SBF back to stock and install the OTA, is there a root method that still works? And is there an SBF for the new OTA? I have the SBF named Happy_Holidays_From_TBH.
zehkaiser said:
I have not installed any leaks after the last official SBF (Stock 2.2). If I SBF back to stock and install the OTA, is there a root method that still works? And is there an SBF for the new OTA? I have the SBF named Happy_Holidays_From_TBH.
Click to expand...
Click to collapse
Z4 has been confirmed to still work.
You might want to save the app to your SD card first, for convenience, and just in case it doesn't show in the market after.
I have not heard of an SBF in the wild, for the new OTA.
.340 SBF isn't out there, yet. Z4root works with 2.2.1
Good to know. I upgraded to the .320 leak. The boot loader has updated, but has the key changed? (can I nandroid back to 2.2.15)
zehkaiser said:
Good to know. I upgraded to the .320 leak. The boot loader has updated, but has the key changed? (can I nandroid back to 2.2.15)
Click to expand...
Click to collapse
Nandroid backups to 2.3.15 *seem* to work, but are strongly advised to be avoided. The kernel and bootloader (and associated keys) will still be from 2.3.320/340. You won't be able to use the OTA to get to .340. If you're already on .320, get the system only SBF to get you to .340 (yes, it's out now) and call it a day.
As the title says, my mouse does not work. The phone trackpad or my BT mouse and keyboard. Flashed files from 2nd post in this thread,
http://forum.xda-developers.com/showthread.php?t=1138092
No go. Followed instructions from this thread,
http://forum.xda-developers.com/showthread.php?t=1144119
No go. Can anyone help
Webtop works, meaning when I plug in the HDMI I get the webtop on my tv but cant move the mouse.
i had the same problem
http://forum.xda-developers.com/showthread.php?t=1139557
first i deleted webtop everything from system/app
then i motofastboot flashed the webtop img cgimg
make sure your doing moto fast boot not just fastboot
then i did this one copy and pasted line by line rebooted twice
bam back to normal
Tried flashing cg61.img using fastboot with failure because image is too big. I can try to use moto-fastboot but dont how see that will help. Is there a way to wipe the webtop completely or is that what you did when youdeleted everything to do with webtop from /system/app
hatefuel19 said:
Tried flashing cg61.img using fastboot with failure because image is too big. I can try to use moto-fastboot but dont how see that will help. Is there a way to wipe the webtop completely or is that what you did when youdeleted everything to do with webtop from /system/app
Click to expand...
Click to collapse
moto-fastboot specifically allows for larger image files.
dLo GSR said:
moto-fastboot specifically allows for larger image files.
Click to expand...
Click to collapse
you beat me to it
fastboot is really only for the fastboot oem unlock in the pudding thread
use moto-fastboot for all flashing after you have finished pudding
fastboot only allows flashing something like a 256mb file. you have to use moto-fastboot for system and webtop images.
Exactly the help I was looking for.....thanks a million guys
last question.....is there a list of all files floatin around for webtop?
Sent from my MB860 using XDA App
hatefuel19 said:
Exactly the help I was looking for.....thanks a million guys
last question.....is there a list of all files floatin around for webtop?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
what do you mean?
I used the one from the webtop 2.3.4 hktw fix thread that you listed.
It works great. I also did the webtop2SD thread on 2.3.4 with the 2.3.4 webtop and it works perfectly.
If you want the 1.83 webtop you have to flash back to 1.26 then 1.83 spf and then reflash pudding. personally I have been using 2.3.4 hktw since it was leaked and have not wanted to go back to 1.83 despite the little issues in 2.3.4.
my 2.3.4 build has the following in it...
tenfars latest recovery CWM
hktw system
boot.img with remount support
webtop from the webtop fix thread
my cardock fix
webtop2SD
Gentoo in webtop
Debian in webtop with xfce4
joe ferreira said:
what do you mean?
I used the one from the webtop 2.3.4 hktw fix thread that you listed.
It works great. I also did the webtop2SD thread on 2.3.4 with the 2.3.4 webtop and it works perfectly.
If you want the 1.83 webtop you have to flash back to 1.26 then 1.83 spf and then reflash pudding. personally I have been using 2.3.4 hktw since it was leaked and have not wanted to go back to 1.83 despite the little issues in 2.3.4.
my 2.3.4 build has the following in it...
tenfars latest recovery CWM
hktw system
boot.img with remount support
webtop from the webtop fix thread
my cardock fix
webtop2SD
Gentoo in webtop
Debian in webtop with xfce4
Click to expand...
Click to collapse
I got it fixed with the CG61 img and it's working perfectly now. The key was to use moto-fastboot, not the normal fastboot in my sdk folder. I'm going to put debian back into my webtop (had it in my 183 webtop and loved it). What is the xfce4 you mentioned in your debian???????????
hatefuel19 said:
I got it fixed with the CG61 img and it's working perfectly now. The key was to use moto-fastboot, not the normal fastboot in my sdk folder. I'm going to put debian back into my webtop (had it in my 183 webtop and loved it). What is the xfce4 you mentioned in your debian???????????
Click to expand...
Click to collapse
if you look at my posts in the debian thread I posted instructions.
xfce4 is a lightweight window manager like gnome.
only gnome is like 2 gig
xfce4 is about 700mb
Warning
Don't worry, they won't give you a brickable device like the over-the-air zip.DescriptionI've uploaded the stock images for those who want to check out 4.5.91 without trying a custom ROM or creating a brickable device.
You'll still need an unlocked bootloader to flash these images, but they should provide you with a clean version of 4.5.91 that works perfectly.DownloadClick to Download
(under "Gingerbread stock images" label)
(ignore directions above the download)Instructions
Download moto-fastboot for your operating system
Turn your device off
Boot into "Fastboot mode" by holding down the bottom volume button while pressing power.
Use the following commands to flash the images:
moto-fastboot flash boot boot.img
moto-fastboot flash system system.img
Use the following commands to wipe data and reboot:
moto-fastboot -w
moto-fastboot reboot
Sweet! Thanks
Sent from my MB860 using XDA Premium App
So I'm confused..how is this different than the other methods of getting 4.5.91? I know one of then can brick if you flash sbf, but isn't the cwm zip safe?
Sent from my Motorola Atrix using the XDA App
thebeardedchild said:
So I'm confused..how is this different than the other methods of getting 4.5.91? I know one of then can brick if you flash sbf, but isn't the cwm zip safe?
Sent from my Motorola Atrix using the XDA App
Click to expand...
Click to collapse
These are completely safe to flash. They don't mess with your bootloader like the OTA or SBF.
Thanks ken, How's the new atrix brorher?
msd24200 said:
Thanks ken, How's the new atrix brorher?
Click to expand...
Click to collapse
Running nicely.
kennethpenn said:
These are completely safe to flash. They don't mess with your bootloader like the OTA or SBF.
Click to expand...
Click to collapse
So is there any particular benefit to using this instead of the flashable zip beta #4 thing you have in the dev forum?
Why does the brief mobile site say you need CWM? Your instructions just say fastboot. I am relatively new at this so excuse the stupid question if it is one.
So before flashing this we need to unlock bootloader by flashing the pudding unlock sbf. After that can we gain root by using the root.zip found on the other threads by flashing with cwm
Sent from my MB860 using XDA Premium App
So does this work just as well as the other one that was removed because of potentiak damages to peoples phone? I just want to make sure if I use this I have everything working, like the fingerprint reader.
seems good, lets try
ram8704 said:
Why does the brief mobile site say you need CWM? Your instructions just say fastboot. I am relatively new at this so excuse the stupid question if it is one.
Click to expand...
Click to collapse
The download links for the image pack is below those instructions, because those are for something else. Just use fastboot for these.
Sorry, if I am being a bit thick here.
Having installed this update, one should generally avoid installing future OTA's, correct?
kennethpenn said:
Warning
Don't worry, they won't give you a brickable device like the over-the-air zip.DescriptionI've uploaded the stock images for those who want to check out 4.5.91 without trying a custom ROM or creating a brickable device.
[/LIST]
Click to expand...
Click to collapse
Hi Ken,
Could you please help to clarify:
1- I have already been on 2.3.4, using flashable zip for locked bootloader. Anything different between your rom and the previous flashable zip file ? Is your file is final one ?
2- Noting that using 2.3.4 via flashable zip for locked bootloader, I can not flash back to stock 1.8.3 rom (or I have to use the modded stocked 1.8.3 with unlocked bootloader). Can I flash back the stock 1.8.3 (original one) after using your file ?
Hope your reply soon
Thank you very much,
Quang
quang_nguyen said:
Hi Ken,
Could you please help to clarify:
1- I have already been on 2.3.4, using flashable zip for locked bootloader. Anything different between your rom and the previous flashable zip file ? Is your file is final one ?
2- Noting that using 2.3.4 via flashable zip for locked bootloader, I can not flash back to stock 1.8.3 rom (or I have to use the modded stocked 1.8.3 with unlocked bootloader). Can I flash back the stock 1.8.3 (original one) after using your file ?
Hope your reply soon
Thank you very much,
Quang
Click to expand...
Click to collapse
If you're on the OTA zip... just stay... you've already got a STOCK ROM.
After inputing the command everything seems to be fine. Upon rebooting the phone said unable to boot starting RSD mode. I am currently flashing to 1.8.3 with rsd lite. Any idea why that happened before I try again?
ram8704 said:
After inputing the command everything seems to be fine. Upon rebooting the phone said unable to boot starting RSD mode. I am currently flashing to 1.8.3 with rsd lite. Any idea why that happened before I try again?
Click to expand...
Click to collapse
Did you do all of the commands?
moto-fastboot flash boot boot.img
moto-fastboot flash system system.img
moto-fastboot flash webtop webtop.img
moto-fastboot -w
moto-fastboot reboot
kennethpenn said:
If you're on the OTA zip... just stay... you've already got a STOCK ROM.
Click to expand...
Click to collapse
Tks Ken,
How about the possibility of flash back to 1.8.3 ? Can I back after using your file ? If I can, can I upgrade to your file without hard brick my phone ?
Noting that your file is more completed than flashable ZIP file (more img files)
One more thing, after using your file, can I use OTA when AT&T officially announces the final one ?
Best regards,
Quang
kennethpenn said:
Did you do all of the commands?
moto-fastboot flash boot boot.img
moto-fastboot flash system system.img
moto-fastboot flash webtop webtop.img
moto-fastboot -w
moto-fastboot reboot
Click to expand...
Click to collapse
I just did boot and system.
kennethpenn said:
Did you do all of the commands?
moto-fastboot flash boot boot.img
moto-fastboot flash system system.img
moto-fastboot flash webtop webtop.img
moto-fastboot -w
moto-fastboot reboot
Click to expand...
Click to collapse
Err, Just downloaded the zip file, found got
boot.img
data.img
radio.img
system.img
webtop.img
5 imgs, do I need to flash them all to get a complete system, or just need to flash boot.img, system.img and webtop.img?
Thanks
I'm on Kenneth's 4.5 beta gingerbread ROM right now
what is the most ideal and safest way to sbf back to stock 1.8.3 for now?
RSD and SBF?
thanks!
Did you start with the HKTW build? Or did you flash the .img files provided by Kenneth?
If it is the latter you can sbf back to 1.8.3 but I believe "safest" would be to flash to 1.2.6 and update up from there...
someone chime in to make sure i'm not totally wrong.
More on this here
All firmwares
From adb shell do:
#cat /sys/firmware/fuse/ReservedOdm
Make sure it doesn't contain a "3" like this
10000000000010001000300000000
If it does you'll be hard bricked if you flash a pre 2.3 SBF file
chriscerv90 said:
Did you start with the HKTW build? Or did you flash the .img files provided by Kenneth?
If it is the latter you can sbf back to 1.8.3 but I believe "safest" would be to flash to 1.2.6 and update up from there...
someone chime in to make sure i'm not totally wrong.
More on this here
All firmwares
Click to expand...
Click to collapse
I started from a clean SBF of 1.8.3
then I SBF'ed the unlock
fastboot unlocked
rooted using gingerbreak
installed unlocked CWM
then installed Ken's gingerbread
henrys01 said:
From adb shell do:
#cat /sys/firmware/fuse/ReservedOdm
Make sure it doesn't contain a "3" like this
10000000000010001000300000000
If it does you'll be hard bricked if you flash a pre 2.3 SBF file
Click to expand...
Click to collapse
so if it doesn't then I can use RSD Lite to flash a SBF?
I soft bricked my phone yesterday and what I did was dowloaded WinRAR and extracted this build:
OLYFR_U4_1.8.3_SIGNED_OLPSATTSPE_P013_HWolympus_1g_1FF.sbf.7z
RSD'd it over in RSD protocol and worked fine.
Then I used Sideload wonder machine to to install Gingerbreak.apk to root and the MOTOA4_Bootstrap_0408_1720-signed.apk.
Worked like a charm for me.
Phoneguy589 said:
I soft bricked my phone yesterday and what I did was dowloaded WinRAR and extracted this build:
OLYFR_U4_1.8.3_SIGNED_OLPSATTSPE_P013_HWolympus_1g_1FF.sbf.7z
RSD'd it over in RSD protocol and worked fine.
Then I used Sideload wonder machine to to install Gingerbreak.apk to root and the MOTOA4_Bootstrap_0408_1720-signed.apk.
Worked like a charm for me.
Click to expand...
Click to collapse
so you were on kenneth's gingerbread beta and you used that SBF to flash back?
Hello everyone I was hoping I could get some help with my ATT Atrix 4G, as of right now I have my Atrix running 1.5.7 and rooted. For some reason about a week ago my Wifi just stopped working and says error. So I did a little looking around and didnt see a fix besides flashing the phone so I thought I might as well update to the latest and greatest. Now I did my phone so long ago that I have Tenfar's CWM recovery for Motorola Atrix 4G on it. I would like to flash to Flashable SBF: Full 2.3.4 with preinstall root and pudding bootloader unlock, full sbf but Im not sure the steps I need to take. Over all this is what I would like to do.
Number 1. Put CWM Recovery Mod for Atrix 4G and take off Tenfar's CWM
Number 2. Unlock the phone Pudding
Number 3. Flash to Flashable SBF: Full 2.3.4 with preinstall root and pudding bootloader unlock, full sbf
Number 4. Get wireless tether working.
One thing I don't fully understand is do you need to unlock the phone using pudding before you flash Full 2.3.4 with preinstall root and pudding bootloader unlock or can you just flash and have it unlocked?
So what I really need to know is the order of everything, CWM Recovery Mod for Atrix says you need to be unlocked to use it. So do I need to unlock the phone like in number 2 to before I do number 1 and 3 or can I flash number three and the will unlock the phone? Then do Number 1 and skip number 2 altogether? And as far as number 4 goes if some one could point me in the right direction for working wifi tether on 2.3.4 ATT that would be great.
One other thing I was wondering is it safe to flash for 1.5.7 to 2.3.4 or should I flash to 1.8.3 and then to 2.3.4?
Thanks so much and any and all help is greatly appreciated
Jay
1. You need too unlock first
http://forum.xda-developers.com/showthread.php?p=16018910#post16018910
2. You need to install Tenfars (not rom managers) CWM recovery for atrix unlocked.
http://forum.xda-developers.com/showthread.php?t=1138541
3. Install whatever ROM you feel you will like. I recommend Kenns ROMS
http://forum.xda-developers.com/showthread.php?t=1186537
or
http://forum.xda-developers.com/showthread.php?t=1160649 from Nav.
Both good roms.
Thanks JayRolla but do I need to flash to Full 2.3.4 with preinstall root and pudding bootloader unlock before I install the 2.3.4 roms you linked to up there?
Jay Dogg said:
Thanks JayRolla but do I need to flash to Full 2.3.4 with preinstall root and pudding bootloader unlock before I install the 2.3.4 roms you linked to up there?
Click to expand...
Click to collapse
As far as I understand, at the moment you are on 1.8.3.
In that case the very first thing you should do is flash pudding (BL unlock sbf).
After that install CWM and do a full backup.
When you have that you can install whichever room you want (don't sbf back to 1.8.3 tho - hard brick), you can install stock 2.3.4 via CWM and root it afterwords manually if you want. It's all a matter of which rom you prefer. Hell, you can try them all as CWM makes it all really easy.
Pudding needs to be flashed only at step 1 and it stays with your forever as long as you dont' SBF. Which you really don't need to do since we have CWM and fastboot.
Have a quick question, what is the difference between the automatic unlock script and the SBF that unlocks and roots via preinstall?
I am on stock 4.5.91 OTA with no modifications at all. Which method should I use? Which is safest/easiest.
I am on win7 64 bit with latest moto drivers installed.
dcarpenter85 said:
Have a quick question, what is the difference between the automatic unlock script and the SBF that unlocks and roots via preinstall?
I am on stock 4.5.91 OTA with no modifications at all. Which method should I use? Which is safest/easiest.
I am on win7 64 bit with latest moto drivers installed.
Click to expand...
Click to collapse
Automatic script is supposed to automate (duh ) some of the unlocking steps for you, but I personally wouldn't recommend it. It failed for me and for many other people too if you read their thread.
With the manual pudding unlock - you can't screw up if you follow all of the steps precisely. But you do have to do all the steps manually, which is a good learning process if you ask me.
If you are on 4.5.91, after flashing pudding and doing the fastboot unlock commands you will get failed to boot error. This is normal and all you have to do is repeat the fastboot commands for the second time and all will be fine.
Do not under the fear of death SBF back to 1.8.3 or you will brick your phone.
Here is the link to the pudding SBF -
http://forum.xda-developers.com/showthread.php?t=1136261
Here are the specific steps laid out in a very straightforward way -
http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
Just make sure you install the drivers before doing them. For example, you can download Windows 7 x64 drivers here -
http://forum.xda-developers.com/attachment.php?attachmentid=634880&d=1308872277
xploited said:
Automatic script is supposed to automate (duh ) some of the unlocking steps for you, but I personally wouldn't recommend it. It failed for me and for many other people too if you read their thread.
With the manual pudding unlock - you can't screw up if you follow all of the steps precisely.
Here are the specific steps laid out in a very straightforward way -
http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
Just make sure you install the drivers before doing them. For example, you can download Windows 7 x64 drivers here -
http://forum.xda-developers.com/attachment.php?attachmentid=634880&d=1308872277
Click to expand...
Click to collapse
Thanks for the info
One last question, should I use the small (10mb) pudding sbf or the full SBF that does unlock + root all in one?
dcarpenter85 said:
Thanks for the info
One last question, should I use the small (10mb) pudding sbf or the full SBF that does unlock + root all in one?
Click to expand...
Click to collapse
I would recommend using the smaller pudding sbf, since that's what I used. But from what I read, both SBFs work without problems.
You can root manually afterwords. It's very easy.
xploited said:
As far as I understand, at the moment you are on 1.8.3.
Click to expand...
Click to collapse
Im on 1.5.7 rooted right now, not sure if that makes any kind of difference, do I need to be on 1.8.3 or higher before I do pudding?
Jay Dogg said:
Im on 1.5.7 rooted right now, not sure if that makes any kind of difference, do I need to be on 1.8.3 or higher before I do pudding?
Click to expand...
Click to collapse
Nope. The process slightlt differs between 2.3.4 and prior.
But besides that you can unlock 1.5.7 just fine.
Jay Dogg said:
Im on 1.5.7 rooted right now, not sure if that makes any kind of difference, do I need to be on 1.8.3 or higher before I do pudding?
Click to expand...
Click to collapse
No you don't need to be on 1.83 but for easy I would recommend also if it helps these are the steps I took.
1. Unlock bootloader using auto script http://forum.xda-developers.com/showthread.php?t=1182871 (I was running 1.83) (**I did have an issue after doing this where it wiped my phone and wouldn't let me go past the MOTOBLUR login so I just flashed back down to 1.26 OTA back to 1.83 then reran the script just to make sure I was still unlocked now I only read about that happening to one other person on their forum so chances are slim of it happening**)
2. Using RSD (the latest one 5.x.x) I flashed the 2.34 sbf that comes prerooted/unlocked although the root doesn't actually work then you have to follow the preinstall root method they describe on that same post for the sbf.
I never installed CWM but I would suggest doing that one last
**Edit: yes I did forget to mention my circumstance where I flashed back to 1.26 was Im sure pure luck that I did not hard brick my phone. This is not recommended. Why my phone did not brick is still unknown.
From unlocked/rooted GB Atrix
I'm on 1.8.3, unlocked, rooted, with Gingerblur and webtop hacks (web2sd, without dock, full ubuntu).
So I'm confused as to why I cant just flash ATT-2.3.4_Pudding_preroot.sbf, it has 2.3.4/2.5.91, unlocked, root preinstalled.
Would this not give me unlocked 2.3.4 with root ready to set-up? Would I have to "clean" it or is that just optional?
People are saying to install pudding using the automatic script first, but then why create the above sbf file?
What about the 1.8.3, unlocked, root preinstall sbf file?
So if I cant use the unlocked 2.3.4 sbf file, I would first flash pudding on my phone then which 2.3.4/4.5.91 sbf file would I flash with since the OTA update won't work due to mods, and because I didnt think we should use OTA.
I want to do the method that will prevent any bricking, but I also dont want to waste time or do unnecessary flashing.
BE CAREFULLY .... IT SEEM HE/SHE WAS LUCKY WHEN HE/SHE FLASH BACK TO 1.26... IF YOU RUN THE SCRIPT AND PASS STEP 3 YOU HAVE PUDDING SO IF YOU FLASH BACK TO 1.26 YOU WILL END WITH A HARD BRICK... IT IS WELL DETAILED IN THE SCRIPT ONCE YOU HAVE PUDDING YOU CAN NOT RSD ANY DOWNGRADE VERSION OF MOTO SBF FOR EX 1.26 1.57 OR 1.83
drock212 said:
No you don't need to be on 1.83 but for easy I would recommend also if it helps these are the steps I took.
1. Unlock bootloader using auto script http://forum.xda-developers.com/showthread.php?t=1182871 (I was running 1.83) (**I did have an issue after doing this where it wiped my phone and wouldn't let me go past the MOTOBLUR login so I just flashed back down to 1.26 OTA back to 1.83 then reran the script just to make sure I was still unlocked now I only read about that happening to one other person on their forum so chances are slim of it happening**)
2. Using RSD (the latest one 5.x.x) I flashed the 2.34 sbf that comes prerooted/unlocked although the root doesn't actually work then you have to follow the preinstall root method they describe on that same post for the sbf.
I never installed CWM but I would suggest doing that one last
From unlocked/rooted GB Atrix
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
I flashed the full SBF of 2.3.4 with pudding and preroot already installed and I was left with a 0x1000 error which i was able to fix by simply rebooting into fastboot mode and then running 'fastboot oem unlock'. I was really scared when I saw the error but I was able to fix it. Just an fyi for anyone else that might run into that problem.
A few weeks ago when the bootloader was unlocked, and hktw craze began I was happily running GB, a couple days into it my phone started acting crazy, would constantly act if someone was touching it, and I noticed a very small portion of the touch screen quit responding, this happened out of no where, I took the phone back to at&t and they shipped a new one to me.
Now that has nothing to do with your phone but what I am trying to say is that if hardware on your phone randomly quit working more than likely having nothing to do with mods you've done to it.. take it back, get a new one, if you can.
Goodluck
Sent from my MB860 using XDA Premium App
dcarpenter85 said:
I flashed the full SBF of 2.3.4 with pudding and preroot already installed and I was left with a 0x1000 error which i was able to fix by simply rebooting into fastboot mode and then running 'fastboot oem unlock'. I was really scared when I saw the error but I was able to fix it. Just an fyi for anyone else that might run into that problem.
Click to expand...
Click to collapse
This is a known issue and you resolved it correctly by redoing fastboot commands.
Many other people weren't so luck (didn't read instructions) and opted for an SBF back, causing them to hardbrick.
Now just so make sure before I do this, should I take path a or b
PATH A
1. You need too unlock first
http://forum.xda-developers.com/show...0#post16018910
2. You need to install Tenfars (not rom managers) CWM recovery for atrix unlocked.
http://forum.xda-developers.com/show....php?t=1138541
3. Install whatever ROM you feel you will like. I recommend Kenns ROMS
http://forum.xda-developers.com/show....php?t=1186537
or
http://forum.xda-developers.com/show....php?t=1160649 from Nav.
PATH B
1. You need too unlock first
http://forum.xda-developers.com/show...0#post16018910
2. You need to install Tenfars (not rom managers) CWM recovery for atrix unlocked.
http://forum.xda-developers.com/show....php?t=1138541
3 .Flash to Flashable SBF: Full 2.3.4 with preinstall root and pudding bootloader unlock, full sbf
4. Install whatever ROM you feel you will like. I recommend Kenns ROMS
http://forum.xda-developers.com/show....php?t=1186537
or
http://forum.xda-developers.com/show....php?t=1160649 from Nav.
Jay Dogg said:
Now just so make sure before I do this, should I take path a or b
PATH A
1. You need too unlock first
http://forum.xda-developers.com/show...0#post16018910
2. You need to install Tenfars (not rom managers) CWM recovery for atrix unlocked.
http://forum.xda-developers.com/show....php?t=1138541
3. Install whatever ROM you feel you will like. I recommend Kenns ROMS
http://forum.xda-developers.com/show....php?t=1186537
or
http://forum.xda-developers.com/show....php?t=1160649 from Nav.
PATH B
1. You need too unlock first
http://forum.xda-developers.com/show...0#post16018910
2. You need to install Tenfars (not rom managers) CWM recovery for atrix unlocked.
http://forum.xda-developers.com/show....php?t=1138541
3 .Flash to Flashable SBF: Full 2.3.4 with preinstall root and pudding bootloader unlock, full sbf
4. Install whatever ROM you feel you will like. I recommend Kenns ROMS
http://forum.xda-developers.com/show....php?t=1186537
or
http://forum.xda-developers.com/show....php?t=1160649 from Nav.
Click to expand...
Click to collapse
Path A. After flashing pudding i would avoid SBFs entirely, unless there's no other way. Any rom can be flashed via fastboot or CWM, so use that as it's much safer.