Database Users

[HOWTO] Restore to stock for root users and non-root users UPDATED 5/17/2011

Stop, listen. Follow my directions, if you fail to follow directions I will no longer help you. Don't PM me and ask. If you screw up ask in the thread.
Rooted Users (Non - Root Users scroll down below):
MR1 RUU
http://www.multiupload.com/KU7GSF2EY0
PG05IMG_MR1_no_hboot.zip - c64b4367086fff4f51ec3d5d766a0456
Bootloader (FLASH THIS LAST) FLASHING THIS WITHOUT SUCESSFULLY FLASHING THE ABOVE FILE WILL CAUSE A SECURITY WARNING
http://www.multiupload.com/26WG1UZCXR
abda920f3e159fb05c00d8c54a5b8768 - PG05IMG_hboot_1.4.0000.zip
Flash the above PG05IMG_MR1_no_hboot.zip to restore everything to stock + OTA BUT still will have the s-off bootloader.
Rename PG05IMG_MR1_no_hboot.zip as PG05IMG.zip, and flash through hboot (like in the root guide).
To restore the bootloader, rename PG05IMG_hboot_1.4.0000.zip as PG05IMG.zip and flash through the bootloader. DO NOT FLASH THIS unless you are absolutely sure PG05IMG_MR1_no_hboot.zip flashed to your device, without issue.
Now you are done, enjoy. If you screwed up, and got a security warning contact me, don't stress. Then again, don't screw up.
Non root users wanting to return to 1.12.605.6 (Stock, pre OTA) can continue below:
NOT FOR ROOT USERS
Taken from AndroidPolice: [Tutorial] How To "Un-Root" The HTC ThunderBolt And Return It To Stock. Please check the site out.
One of the most popular questions about rooting the ThunderBolt is how to undo the process and return to stock, which renews your eligibility for customer support. Well, here you go:
Instructions:
Please read the whole tutorial first, and pay attention to every detail. Note that your battery needs to be charged to at least 40% at the beginning of the process, and remember to check the MD5 sums of all downloaded files before diving in. As always, neither Android Police nor Team AndIRC are responsible for any damage this may cause to your phone, and, needless to say, returning to stock means you will no longer be able to use root apps like ShootMe and Titanium Backup.
First, download the following files:
Stock firmware (MD5 sum: 7141f5620f6128af77d50587e341f4b0)
exploits.zip (MD5 sum: 3b359efd76aac456ba7fb0d6972de3af)
Next, push exploits.zip and misc.img.
Code:
adb push misc.img /data/local/
adb push busybox /data/local/
adb shell chmod 777 /data/local/busybox
To gain root and flash misc.img:
Code:
adb shell
su
/data/local/busybox md5sum /data/local/misc.img
If the output is anything other than "c88dd947eb3b36eec90503a3525ae0de," stop and start over again.
Now let’s write misc.img:
Code:
dd if=/data/local/misc.img of=/dev/block/mmcblk0p17
Rename "PG05IMG_Mecha_VERIZON_WWE_1.12.605.6_Radio_1.16.00.0223r_NV_8k_1.41_9k_1.64_
release_174685_signed.zip" to "PG05IMG.zip" before placing it on your SD card.
Finally, reboot into bootloader mode by entering the following command. Allow the stock firmware to flash.
Code:
adb reboot bootloader
You’re done – your phone should now be stock, S-ON.

Bookmarking this, just in case. Thanks, Jcase!

Looks like I'll be going back to Froyo for now. I believe the Sense in GB leak is older than the stock on the device.. plus.. camera doesn't work, weather in clock widget doesn't work.. quadrant score is pretty low.. As for now.. I don't see any solid reason to upgrade to GB.. (though I wish I did).. sigh!

http://forum.xda-developers.com/showthread.php?t=1082114
Follow that to return to stock from gingerbread

I am getting No Image or Wrong Image Error In Final Step. I downloaded Stock Firmware Twice but same issue!

Can anyone help me out? I am not able to return to stock. I have BAMF remix 1.6.3 installed and trying to get back to stock as i have to send this device back to Verizon for replacement. I tried everything..file name is correct....md5 sum is correct however in final step when i tried to load the stock FW the boot-loader says wrong image!!
i downloaded stock FW from every possible source but no different!
Please Help!

If I wanted to unroot and use pre ota software? Would I have to perform both procedures or is there a way to go straight to the pre ota with s-on?

spjoneser said:
If I wanted to unroot and use pre ota software? Would I have to perform both procedures or is there a way to go straight to the pre ota with s-on?
Click to expand...
Click to collapse
Take the pre ota RUU, and make a custom ruu out of it without the hboot, and then proceed with the instructions in the first half.

jcase said:
Take the pre ota RUU, and make a custom ruu out of it without the hboot, and then proceed with the instructions in the first half.
Click to expand...
Click to collapse
First of all Jcase, thanks for the time, I know it's valuable to the community.
So just so I'm clear.... All I need to do is remove "hboot_7630_1.04.0000_110223.nb0" from the pre ota ruu or is there more to be altered than just that?
And if that's all I have to do is flash those seperate, could you tell me briefly why you could not just flash all at once? Would it not flash the rest of it if the stock hboot was installed first?

spjoneser said:
First of all Jcase, thanks for the time, I know it's valuable to the community.
So just so I'm clear.... All I need to do is remove "hboot_7630_1.04.0000_110223.nb0" from the pre ota ruu or is there more to be altered than just that?
And if that's all I have to do is flash those seperate, could you tell me briefly why you could not just flash all at once? Would it not flash the rest of it if the stock hboot was installed first?
Click to expand...
Click to collapse
Yes, because some radios seem to cause the files to flash in different orders, doing it like this keeps me from having to make multiple versions.
Sent from my LG Revolution

Question I have used the oneclick program to get ride of the NV recovery but I think im still rooted because I still see my superuser program on my stock 2.2. Can I just download Rom Manager and use clockwork Recovery to flash the Zips? I have to stock recover now which just formats the phone pretty much.

Androidfreakz said:
Question I have used the oneclick program to get ride of the NV recovery but I think im still rooted because I still see my superuser program on my stock 2.2. Can I just download Rom Manager and use clockwork Recovery to flash the Zips? I have to stock recover now which just formats the phone pretty much.
Click to expand...
Click to collapse
You need to consult the author of the program, because I don't know what it did, I can't support their application.
Sent from my LG Revolution

This flashes EVERYTHING back to stock? I have my boss tripping that his phone is bad after rooting it. I want to know if this reverts the baseband back to stock too?

AnalyzeFaith said:
This flashes EVERYTHING back to stock? I have my boss tripping that his phone is bad after rooting it. I want to know if this reverts the baseband back to stock too?
Click to expand...
Click to collapse
Reverts everything back to stock + OTA

Can I still use these steps to revert to stock after flashing the leaked Gingerbread Radio?

i am rooted and so i followed directions for first file and lost root.. so for the second file(its been forever since rooting) do i run adb commands( like step 6 for rooting) for install or can i use fastboot and bootloader? Does the second file bring root back?

Droid_ALM2ND said:
Can I still use these steps to revert to stock after flashing the leaked Gingerbread Radio?
Click to expand...
Click to collapse
yes
1234567890

droidrev71 said:
i am rooted and so i followed directions for first file and lost root.. so for the second file(its been forever since rooting) do i run adb commands( like step 6 for rooting) for install or can i use fastboot and bootloader? Does the second file bring root back?
Click to expand...
Click to collapse
Of course you lost root, this is for restoring to stock. It removes root.

jcase said:
Of course you lost root, this is for restoring to stock. It removes root.
Click to expand...
Click to collapse
well the good news is it works..the bad news is i didn't realize it was back to factory stock (like out of the box) which is very useful.. my bad.. so how do i install the bootloader file?

droidrev71 said:
well the good news is it works..the bad news is i didn't realize it was back to factory stock (like out of the box) which is very useful.. my bad.. so how do i install the bootloader file?
Click to expand...
Click to collapse
if you are S-off, you can just flash the MR1 upgrade from the root guide, otherwise you have to do a complete re-root.

ROM Manger + 1.8.3 (Froyo) question?

I was previously on 2.3.4 with CherryBlur, but i downgraded back to 1.8.3 (Froyo) through SBF.
When i boot up it no longer says "Unlocked", but i read around and i believe my Phone still has an unlocked bootloader. (Quick Question: How do i get it back to say "Unlocked" without losing any data?)
Now I installed ROM Manager from the Market, and Installed CWM, because i think i lost CWM when i downgraded.
Question: Am i ready to download and install Roms now. Also when i click Download Roms in the Rom Manager i get an error getting list.

theres a cmd in the unlock thread that let you know if youre still unlocked. and i dont know of any rom that are downloadable from there yet.

primeboss said:
I was previously on 2.3.4 with CherryBlur, but i downgraded back to 1.8.3 (Froyo) through SBF.
When i boot up it no longer says "Unlocked", but i read around and i believe my Phone still has an unlocked bootloader. (Quick Question: How do i get it back to say "Unlocked" without losing any data?)
Now I installed ROM Manager from the Market, and Installed CWM, because i think i lost CWM when i downgraded.
Question: Am i ready to download and install Roms now. Also when i click Download Roms in the Rom Manager i get an error getting list.
Click to expand...
Click to collapse
reflash the pudding for your device and fastboot oem unlock again

joe ferreira said:
reflash the pudding for your device and fastboot oem unlock again
Click to expand...
Click to collapse
all you have to do is reflash the pudding. i've done it multiple times. if you try to fastboot oem unlock again it'll say already unlocked. reflashing the pudding restores the prestigious Unlock text at boot

Is there a way to tell if a bootloader is unlocked?

Hello everyone?
My brother just emailed me a question the question in the topic. I told him to ask himself here, but hes at work at XDA is a site he cant access from work.
He had unlocked his bootloader and installed a version of Ginbergread. He then decided to flash back to stock and install the official Gingerbread OTA update, and it worked. Now when he starts his phone up the unlocked indicator is gone, so is he still unlocked and if so, how does he tell?
I think his main goal here is installing CWM Recovery so he can then root using the CWM Recory Root, but honestly, I dont know. Im simply asking the question. So with all that being said, is there a wait to tell if his bootloader is still unlocked or is it always going to be unlocked even if it no longer says unlcoked during the phones start up process?
Now, just in case he asks me, can he install CWM and the CWM Root with official OTA GB Update if he had previously unlocked his bootloader?
I (and my brother) appreciate any info.

if the unlocked text is gone during boot then he will have to unlock the bootloader again but this is not necessary if he only wants to install CWM.

neotekz said:
if the unlocked text is gone during boot then he will have to unlock the bootloader again but this is not necessary if he only wants to install CWM.
Click to expand...
Click to collapse
When bootloader is unlocked, it remains unlocked. You do not have to unlock it again! The word unlocked disappears when you flash back.
Once unlocked, always unlocked!

Sounds good. So if he wants to install CWM, can he just follow this guide: http://forum.xda-developers.com/showthread.php?t=1138541 to install CWM?
I had assumed thats what he wanted to while I was waiting for a reply I emailed him and I was right. He plans on installing CWM and then then root.zip. Will that work?

JohnnyDanger said:
Sounds good. So if he wants to install CWM, can he just follow this guide: http://forum.xda-developers.com/showthread.php?t=1138541 to install CWM?
I had assumed thats what he wanted to while I was waiting for a reply I emailed him and I was right. He plans on installing CWM and then then root.zip. Will that work?
Click to expand...
Click to collapse
he can follow instructions in that post or he can root, download rom manager from market and install cwm recovery from within the app.
although tenfar's recovery works flawlessly on ATRIX and cwm can't wipe or read from external sd card.
to reiterate, ONCE UNLOCKED, ALWAYS UNLOCKED!!!
hope this helps.
Sent from my MB860 using XDA App

That does help. Thanks a lot. Im hoping to get him involved here. I think he can learn a lot. The Atrix is his first smartphone and I think he is just starting to really dig in. Hes not so concerned with messing things up as he has a lot of expendable income, but I think the more he knows, the more he will enjoy his phone.

With this one you can not fool around, why I said this, because if you unlock your bootloader and have the "unlocked" tag at boot but then you flash by RSD MOTO 2.3.4/4.5.91 sbf you will lost the tag at boot, actually your bootloader still unlocked but not funtional until you reflash pudding again. But my point if someone want to service their phone and want to reflash MOTO 2.3.4/4.5.91 sbf so the simple customer service guy did not figure out that you mess with your phone unlocking it, yeap it work for the simple CS guy but for tech guy nope because of the following statement:
If you want to confirm your status:
adb->su->and "cat /sys/firmware/fuse/ReservedOdm" or just open the file in Root Explorer. If you see something like:
10000000000010001000100004000
Here is the mean of some of those numbers:
10000000000010001000100004000
4= BL "unlock" Bootloader Unlock out of warranty unit
0= BL lock
10000000000010001000100004000
1=NO UPDATE BL TO AP20 Ver. , so you applied GB by moto-fastboot process or by CDW (fruit cake, etc)
3=YOU HAVE A NEW BL AP20 Ver., so you indeed applied GB MOTO OTA<- this guy can NOT RSD ANY MOTO SBF DOWNGRADE 1.26 / 1.57 / 1.83
I hope it help!

CaelanT said:
When bootloader is unlocked, it remains unlocked. You do not have to unlock it again! The word unlocked disappears when you flash back.
Once unlocked, always unlocked!
Click to expand...
Click to collapse
Yeap TRUE , but when you lost the "unlocked" tag because you reflash 2.3.4 SBF you will lost the "unlocked" tag, so unit still with bootloader unlocked but is not 100% functional, you will not able to moto-fastboot partitions until you reapply pudding again and I think this due to the microboot partition (I think CG47)

rafkong said:
he can follow instructions in that post or he can root, download rom manager from market and install cwm recovery from within the app.
although tenfar's recovery works flawlessly on ATRIX and cwm can't wipe or read from external sd card.
to reiterate, ONCE UNLOCKED, ALWAYS UNLOCKED!!!
hope this helps.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
tenfar's CWM can read both the internal and external SD card, you must have the most up-to-date version though. 4.0.0.2 i believe.

mramirezusa said:
If you want to confirm your status:
adb->su->and "cat /sys/firmware/fuse/ReservedOdm" or just open the file in Root Explorer. If you see something like:
10000000000010001000100004000
Here is the mean of some of those numbers:
10000000000010001000100004000
4= BL "unlock" Bootloader Unlock out of warranty unit
0= BL lock
10000000000010001000100004000
1=NO UPDATE BL TO AP20 Ver. , so you applied GB by moto-fastboot process or by CDW (fruit cake, etc)
3=YOU HAVE A NEW BL AP20 Ver., so you indeed applied GB MOTO OTA<- this guy can NOT RSD ANY MOTO SBF DOWNGRADE 1.26 / 1.57 / 1.83
Click to expand...
Click to collapse
That was brilliant, thanks! My Atrix reports the following:
cat /sys/firmware/fuse/ReservedOdm
30000000000030001000300004000
so is it safe to assume that it's unlocked. I'm curious to know what the starting digit (3 in my case) means, as it's different from your example.

Mine looks nothing like your lol
20000000000020002000200004000
I can downgrade all the way back to 2.2

Help atrix!

Ive rooted my Atrix 4G to 2.3.4 and everything worked fine but i wanted to install a custom rom.Everything was going great until i realized it need to be unlocked first
I want to restore it to stock. I dont know how to restore it. Any help guys? I've rooted and did alot of things with my HTC Aria but its nothing like the atrix. PLEASE HELP!
I installed
Tenfar's CWM
&
Grey Blur

jach11 said:
Ive rooted my Atrix 4G to 2.3.4 and everything worked fine but i wanted to install a custom rom.Everything was going great until i realized it need to be unlocked first
I want to restore it to stock. I dont know how to restore it. Any help guys? I've rooted and did alot of things with my HTC Aria but its nothing like the atrix. PLEASE HELP!
I installed
Tenfar's CWM
&
Grey Blur
Click to expand...
Click to collapse
Grey Blur... how old is that. Wasn't that for froyo and not gingerbread...
Ok, 2 things, well 3 things actually...
1) Did you actually try to flash a ROM and/or is your phone stuck in a bootloop? If not, and you just want to return to stock, you can flash the 4.5.91 (Android 2.3.4) sbf file. This will fully return you to stock, no root, no cwm, no nothing but stock. Or if your just trying to wipe the theme you installed, try a factory reset.
2) If you did try to flash a ROM and are stuck somewhere... you can still flash the correct sbf file, or you can go ahead an unlock your bootloader.
3) Do not use Tenfar's recovery. Use Rom Racer's or ROM Manager... but you need to unlock your bootloader first.

Swiftks said:
Grey Blur... how old is that. Wasn't that for froyo and not gingerbread...
Ok, 2 things, well 3 things actually...
1) Did you actually try to flash a ROM and/or is your phone stuck in a bootloop? If not, and you just want to return to stock, you can flash the 4.5.91 (Android 2.3.4) sbf file. This will fully return you to stock, no root, no cwm, no nothing but stock. Or if your just trying to wipe the theme you installed, try a factory reset.
2) If you did try to flash a ROM and are stuck somewhere... you can still flash the correct sbf file, or you can go ahead an unlock your bootloader.
3) Do not use Tenfar's recovery. Use Rom Racer's or ROM Manager... but you need to unlock your bootloader first.
Click to expand...
Click to collapse
You are able to flash Tenfar's without unlocking your phone, it's also required to flash Greyblur. I've done it before aswell, I installed Gingerblur without unlocking my phone. Very dangerous yea I know. So do what Swift said, unlock your phone or flash ONLY a 4.5.91 SBF onto it.
P.S. Yea Gingerblur/Greyblur is froyo!

[Q] Upgrade Available - Rooting possible?

Mine says the upgrade to 4.5.141 is available to download. My Atrix is rooted with locked bootloader, I presuming I am going to lose root with the upgrade.
If so, what rooting method will work?
Thanks for your help.
PS: Will this worK?
https://market.android.com/details?id=org.projectvoodoo.otarootkeeper

charlyee said:
Mine says the upgrade to 4.5.141 is available to download. My Atrix is rooted with locked bootloader, I presuming I am going to lose root with the upgrade.
If so, what rooting method will work?
Thanks for your help.
PS: Will this worK?
https://market.android.com/details?id=org.projectvoodoo.otarootkeeper
Click to expand...
Click to collapse
Just unlock your bootloader and flash a new ROM on your phone. Most of the ROMs available for our phone have that update or better already on the ROM.
Sent from Neutrino, a planet far, far away...

cwburns32 said:
Just unlock your bootloader and flash a new ROM on your phone. Most of the ROMs available for our phone have that update or better already on the ROM.
Sent from Neutrino, a planet far, far away...
Click to expand...
Click to collapse
Thanks, but I don't want to take the route of custom ROMs, sorry.

I had to unlock my bootloader first using RSDlite and the small .sbf file (pudding.rar) Click here to download
My bootloader was supposed to be already unlocked but I guess the updated firmware didn't realize it. I couldn't run fastboot flash without getting an error
I then rooted by flashing preinstall.img and running commands to install the superuser binary and .apk. Instructions here
I don't know of a way to root 4.5.141 without unlocking the bootloader first. If you find a way let me know

http://briefmobile.com/motorola-atrix-4g-root should work.

lauterm said:
http://briefmobile.com/motorola-atrix-4g-root should work.
Click to expand...
Click to collapse
Same thing I used... different source. Still it requires an unlocked bootloader to flash images.
I believe the OP is looking for a root option that will work with a locked bootloader.

charlyee said:
Thanks, but I don't want to take the route of custom ROMs, sorry.
Click to expand...
Click to collapse
Just wondering.. Why not? ;o

nthon9 said:
Just wondering.. Why not? ;o
Click to expand...
Click to collapse
It's kind of a "Been there, done that" kind of thing from my Win Mob days. lol
I am pefectly happy with stock Atrix ROMs, and just want to be able to retain root or re root to use a couple of apps like Titanium Backup.

Has anyone with an unlocked bootloader/rooted Atrix tried the update?
I like to stick with the stock rom for now but I haven't found directions for updating to 141 yet. I'd like to keep root and not hard brick my Atrix...After the 2nd time Moto might get suspicious

I wasn't able to use the OTA updates once I rooted (even before I unlocked my bootloader). Of course, that could be Bell building in a check. I even tried unrooting (using GingerBreak) and that still wouldn't allow me to use an OTA update.
I would think you'll have to root, unlock bootloader, and then flash an firmware file from this tread: http://forum.xda-developers.com/showthread.php?t=1125944.

Actually, you're right in that the OTA update will probably fail without me going to a more "out of the box" state. I suppose I'd have to first create a nandroid, a titanium backup then flash my phone with a 4.5.91 stock image using fastboot, do the OTA, then re-root, and restore the titanium backup to get back to where I was. And if anything fails restore from my nandroid.
Does that sound right?

I've heard there could be issues relating to going back to a locked bootloader file. So I'm not sure on specifics there. I just run CyanogenMod to avoid all that stuff.

penderway said:
Same thing I used... different source. Still it requires an unlocked bootloader to flash images.
I believe the OP is looking for a root option that will work with a locked bootloader.
Click to expand...
Click to collapse
preinstall fastboot method works on a locked bootloader...at least it does for me (locked, rooted and on 141).

gnahc79 said:
preinstall fastboot method works on a locked bootloader...at least it does for me (locked, rooted and on 141).
Click to expand...
Click to collapse
So...in fastboot mode, you were able to run fastboot flash preinstall preinstall.img and thus successfully create the "preinstall\" partition with the necessary files on your phone without getting an error message???
My bootloader was unlocked long ago but I still couldn't flash the preinstall partition without running the pudding unlock .sbf first. Idk

I wasn't even able to boot into fastboot without unlocking the bootloader first.

penderway said:
So...in fastboot mode, you were able to run fastboot flash preinstall preinstall.img and thus successfully create the "preinstall\" partition with the necessary files on your phone without getting an error message???
Click to expand...
Click to collapse
yep, followed all of the steps and every one is successful. I'm very risk-averse when it comes to messing with my phone, so I've never unlocked my phone. Only root.

I love how no one is answering your question just telling you to unlock your bootloader...

I downloaded the ota update, installed and got failed to boot 4 starting rsd node.. i had unlocked bootloader before update help please!! I pulled the battery for now.

gnahc79 said:
yep, followed all of the steps and every one is successful. I'm very risk-averse when it comes to messing with my phone, so I've never unlocked my phone. Only root.
Click to expand...
Click to collapse
Well then, that settles it. The OP (who also doesn't have an unlocked bootloader) should be able to do the same.

gnahc79 said:
yep, followed all of the steps and every one is successful. I'm very risk-averse when it comes to messing with my phone, so I've never unlocked my phone. Only root.
Click to expand...
Click to collapse
Is there any way to get step by step instructions for this