Related
Hello friends first of all sorry for my english ( iam still learning ) my problem is i just bought a ideos x5 and i root it. Then i open it with recovery mod and replace clockwork recovery.img with original. But now i cant get it recovery mod i am holding power and volume key appear ideos and its restarting clockwork mod not appearing what can i do to fix this iam really need a custom rom for overclocking.
Regards...
Ok, So what you have to do is download clockwork recovery.img, copy that and replace it on the phone. Boot your phone, hold volume up + power and it will work.
If I were you I would download clockwork again.. probably it is corrupted.
Tcm9669 said:
Ok, So what you have to do is download clockwork recovery.img, copy that and replace it on the phone. Boot your phone, hold volume up + power and it will work.
If I were you I would download clockwork again.. probably it is corrupted.
Click to expand...
Click to collapse
Its my problem. How can i replace recovery.img again i cant reach the cust_backup directory
Please tell us again what you did, your first post does not explain that clearly.
Once again for copying a different recovery.img: Turn off the device; hold both the + and the - buttons and turn it on. Keep holding + and -, wait a few secs until the screen becomes purple. Then plug in the usb-cable.
Does the purple screen show up? Can you start Android with the stock-ROM that is installed now?
If the purple screen shows up and you get stuck there, try it out on another pc.
XphX said:
Please tell us again what you did, your first post does not explain that clearly.
Once again for copying a different recovery.img: Turn off the device; hold both the + and the - buttons and turn it on. Keep holding + and -, wait a few secs until the screen becomes purple. Then plug in the usb-cable.
Does the purple screen show up? Can you start Android with the stock-ROM that is installed now?
If the purple screen shows up and you get stuck there, try it out on another pc.
Click to expand...
Click to collapse
No there is no purple screen because i change original recovery.img with clockwork img. Yes i can start Android with stock rom i cant install new rom because i cant run clockwork mod. I Think my clockwork recovery.img is corrupted or something.
The purple screen should be displayed even if you deleted the recovery.img-file. If you can't reach that screen at all flash an official huawei-ROM, that should bring back the original recovery.img-file.
Please wait for another opinion before you install another ROM.
Yes, when you replace the img.. you will still have the purple screen available!!
hi 2 all
I want to brief how made brick my tab step by step
first of all i had an Acer_A500_4.010.43_COM_GEN1 3.1 stock rom on my tab that i upgrade it to 3.2 Acer_A500_7.006.01_COM_GEN1 by tablet then i decided to root my tablet for installation custom rom and i downgrade to 3.01 rom by this typic http://forum.xda-developers.com/showthread.php?t=1276227 method 1 i reverted successfully and after rooting i installed and tested this 3 roms (taboonay 2.2-thor 14.2&light speed 1.07) but each one had some problems like google map or gps or rotation screen so i installed a 3.1hc stock rom Acer_A500_4.010.41_COM_GEN1 and rooted that worked good but i had mistake and i forget erase update.zip file from my sd card
4days ago Mistakenly I turn on my tablet with recovery mode and iconia automattically gone to update mode (rom installation) i did nothing but this opration was stopped at 80% and my wrong was here i could not be patient and shut down my tab by power button and i bricked my tablet
after that i test all method for unbrick it like not stable rom , Chinese and whitout Chinese roms using of stock rom like Acer_A500_4.010.38_COM_GEN1
without any success only in not stable rom processes gone to 95 % and then stoped and nothing
after update to chinese rom it stopped at 30 % with yellow triangle sign
and then happend something bad and i loose my CWM
NOW if i want to go to recovery mode by pressing power+vol down keys Iconia show me a message
secure boot: image SOS checksum fail!
and in normal booting I have a locked black screen with nonworking touchables button and android word at left top of screen and clock & 15% battery sometimes it show a message for shutting down
i cant go to setting menu for active my usb debugging and my pc do not recognize my tablet
i cant hard reset my tab because it hanged in 2 message for 30 mins and i cant go to recovery mode and customer services says your device is out of warranty because rotting that
but Fortunately I have my UID
excuse me for long story
any body help me please
thank all of you
that is amazing over 150 visit of this help request without any answer please give me a Proposal
thanks
I have a501 .....
http://forum.xda-developers.com/showthread.php?t=1419164
the chinese rom and checksum error are supposed to happen.
the chines rom is an old unstable version but is provided so we can root it to install cwm and flash a working rom.
after the checksum error you needed to power off and then using the buttons enter recovery mode and go to 'Fix checksum error' in advanced menu - after that reboot.
you should do the following:
a)go back and read the entire post on what to do because you missed the last part
or
b)try the backdoor method
---------- Post added at 12:21 PM ---------- Previous post was at 11:49 AM ----------
just read your entire post again...there's alot going on there isnt there?
have you tried flashing the update.zip again with 3.0.1 on it...get back to the chinese rom, from there install iconia root and root it. Then install cwm and you should be all good - if that doesnt work then use timmyDeans backdoor method it does it for you, all you need to do is install acer recovery installer to install cwm, backup the original stock recovery when the app asks you, you will need it to OTA Update successfully...
Doesn't flashing stock rom remove cwm?
bendystrawboy said:
Doesn't flashing stock rom remove cwm?
Click to expand...
Click to collapse
yeh i just had trouble when i OTA'd last nite on the 2nd update, had to flash stock before it would install, but i may have restored the wrong one from acer recovery installer beforehand...a definite possibility!!!
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
darvis said:
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
Click to expand...
Click to collapse
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
timmyDean said:
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
Click to expand...
Click to collapse
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
darvis said:
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
Click to expand...
Click to collapse
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
timmyDean said:
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
Click to expand...
Click to collapse
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
darvis said:
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
Click to expand...
Click to collapse
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
timmyDean said:
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
Click to expand...
Click to collapse
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
darvis said:
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
Click to expand...
Click to collapse
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Moscow Desire said:
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
thanks a lot
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Click to expand...
Click to collapse
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
darvis said:
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
Click to expand...
Click to collapse
Answer me please
darvis said:
Answer me please
Click to expand...
Click to collapse
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
timmyDean said:
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
Click to expand...
Click to collapse
Hello sir
in upper post u tell me i must go to recover mode by pressing power & vol+
but only i can go to stock recovery with pressing power & vol-(not vol+)
is there any other method for going to recovery mode by (vol+) ?
because Mr Moscow Desire said in his upper post (post no 14 of this thread)
if yes how ?
if not ..... just thank u
there is only one recovery on your device..
you should slowly repost your exact trouble.. then do EXACTLY as someone tell you to fix it..
There is only one recovery on your device . If YOU FLASH CWM RECOVERY .. it overrides the acer recovery.
so if you dont have cwm revovery .
nevermind repost your system rom you are using .. rather or not you know what recovery you have .. Then someone can help you...
LOST BLONDE BABE I AM .. GIGGLES
gOOD LUCK..
Sorry you're having difficulty.
Please go here and download the is tool http://forum.xda-developers.com/showthread.php?t=1307539
Do EXACTLY what it says to do in the PDF
my U8800-51 flashed a rom . power on my U8800-51， the screen is black and a Vibration; and then it can't run in flash mode or pink screen.
anybody can help me???
Can you provide more details. What ROM were you trying to flash? What recovery are you using?
Neil_Feris said:
Can you provide more details. What ROM were you trying to flash? What recovery are you using?
Click to expand...
Click to collapse
I flash the offcial B162 rom， i flash the rom by VOL +/- +POWER ，not by recovery
help me，anybody else. THANKS a lot......
same here
i downgraded my phone from 2.3.4 to 2.2.? and it updated successfully but all i get is a black screen and a vibrate
u8800-51
r0y123 said:
i downgraded my phone from 2.3.4 to 2.2.? and it updated successfully but all i get is a black screen and a vibrate
Click to expand...
Click to collapse
If you can get the phone to me , I can try and recover it for you.. if you cant do it yourself. ( im local to you)
Just to be sure, you are pressing both volume buttons plus the power button to try to get to a pink screen? Sometimes you have to keep these pressed for a few seconds before the device responds.
Hello all, please help me !!!
i have problem, my zenfone 5 stuck on "intel inside" logo. i already test with xFSTK application, but the result still same (Back to intel inside logo).
Sorry my english is bad. Thank's before
Hey buddy,
Download the stock firmware 2.22.40.44. Extract recovery.img from the file. Also download other firmwares after this update. Now turn off your phone. Now turn on by pressing vol+ button and power button at the same time. Now flash the recovery.img. Now turn off the mobile and enter recovery mode by pressing vol - and power button at the same time. Wait till recovery mode comes up. Now if you see no command screen or just an exclamatory mark press vol - and + at the same time amd hold for 5 seconds. Now factory reset once.Now you'll see few options. Now in your pc place all the rom zip files in the fastboot folder. Now select update via adbsideload option. Now first sideload 2.22.40.44 using the command (sideload ROMNAME.zip). As soon as it completes turn off the phone return to recovery mode and sideload other firmwares till 2.22.40.54. Now turn on the phone. Wait till it loads up. Now if you want to update to lollipop, copy the lollipop rom files into internal sd card. Now disconnect data cable. It'll ask for update. That's it. Think this'll help you.
Diharja said:
Hello all, please help me !!!
i have problem, my zenfone 5 stuck on "intel inside" logo. i already test with xFSTK application, but the result still same (Back to intel inside logo).
Sorry my english is bad. Thank's before
Click to expand...
Click to collapse
Try to use debrick tool
Sent from my ASUS_T00F using XDA-Developers mobile app
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
roosta said:
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
Click to expand...
Click to collapse
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
LesterDMolester said:
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
Click to expand...
Click to collapse
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
roosta said:
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
Click to expand...
Click to collapse
Try downloading an older firmware extract the contents of the .app file using huawei firmware extractor and flash system.img recovery_ramdisk.img oeminfo.img product.img and vendor.img using fastboot and if the phone boots up just update it to a newer firmware, that's how i did it to my P10 Plus, it didn't wanna download via eRecovery too, sorry for the misunderstanding i forgot that it doesn't wanna download for you, i don't have the device with me now because i broke my display (again) so it's getting fixed but it won't be done untill saturday, i'll upload the firmware i used so that you can try too.
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
LesterDMolester said:
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
Click to expand...
Click to collapse
Thanks Lester I will try this when Ian home and let you know how I go...
roosta said:
Thanks Lester I will try this when Ian home and let you know how I go...
Click to expand...
Click to collapse
Dude pls wait don't try this i found another way, i bricked my phone accidentally today and i found a way, gonna take me some time to explain but i'll try my best.
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Hi Lester, it's been an eternity since I was online here as I put this on the back-burner with more pressing work and family priorities. Thank you very much for providing the files. I noticed the ROM firmware is EU, when i am outside of EU....but shouldn't be too big of a problem.... I am getting around to doing all of this now, I have downloaded the files. When are you typically online to chat about this?
RoOSTA
It cannot boot into TWRP, only the eRecovery. No option to flash anything on SD card, other than connecting to WIFI...
Hii roosta,
I might have some problem with you, let me facing your thread , I 'like to learn too how to make my P1o plus back to normal again, it's being long time for me to bring this up...
LesterDMolester said:
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Click to expand...
Click to collapse
I had try to download from ( https://androidhost.ru/29Qt ) ....but its need much time event with IDM ( 20hrs ) )