Related
Hello, Guys, Its my first post here, so i allready sorry for my bad English.
I have a big problem with my phone, the this is that when i try to turn it on huawei logo appears and after ~5 seconds it dissapears and nothing happens, phone just turns off. I also cant get acces to CMW. Al i can do is to go to pink screen mode. I also tyed to put dload folder with updates to sdhc card, but when i am trying to load i with 3 buttons combination (VOL +- + power on button), pink screen appears... What should i do in this situation? Maybe anyone had faced this problem, and how have you solved it?
Again sorry for my poor English , and thanks for your help
Looks like your boot and recovery partitions were messed up
Can u access ur fastboot mode?
If u can, try to flash a cwm recovery image using fastboot mode
Sent from my HAL
I cant acces anything exept pink screen. When i put dload folder to sd card update also doesnt start. Is there any way to acces internal memoty through pink screen?
Fastboot (or bootloader mode) is the one that stays (in ur case) at the huawey logo until it receives a command to reboot. Using it, adb and a pc, u can flash img's to the internal memory (among other things)
Try pressing and holding for 2/3 seconds this combo
Hang up button + power
Sent from my HAL
As i said before it doesnt help. I cant acces CWM. (bootloader)
Sorry, i was thinking on other phone. The pink screen is ur bootloader
Try this
" Installing ClockworkMod on the Huawei U8800
1) Extract the recovery.img from the zip file. 2) Turn on your phone while holding VOL+ and VOL- (should come up with pink/purple screen) 3) Connect to computer. 4) Go to My Computer and Browse your phone to find the folder with recovery.img in. 5) Replace the recovery.img with the one you extracted from the zip file.
Or this onehttp://forum.xda-developers.com/showthread.php?p=14870348
Sent from my HAL
Tryed both. Same problem persists
just in case you can´t get it fixed,
see my sig.....
i do have the same issue, please someone help me
Dear Members,
I updated successfully my mobile phone u8800 pro by V100R001C00B928 from huwai website. And i was successfully run my mobile using androi OS 4.0.3. But after sometime i have planned to reinstall the Android OS. So i have formated both the internal and externale SD cards. and places the step1 dload file on the external sd card.
But when my set reboot it show huawei logo and reboot again and again in a loop. I have tried to go in recovery by pressing voume up(+) With start button but it did not go to recovery mode. I connect my mobile with USB cable with my pc ,then i press both volume up(+) and volume down(-) with start button it shows pink screen. i have replaced recovery.img file with newly download file. But unable to go in recovery mode. then i have also replace the boot.img file with new boot.img file. But it still show the same result and reboot in loop again and again.
Now my battery is full discharged. When i connect it with the charger it run and again it goes to reboot loop.
I have try to get help from different sources but all in van. Please help me to find out the solution. and also how can i charge my battery.
Thanks & Regards.
sweetkhaliq said:
Dear Members,
I updated successfully my mobile phone u8800 pro by V100R001C00B928 from huwai website. And i was successfully run my mobile using androi OS 4.0.3. But after sometime i have planned to reinstall the Android OS. So i have formated both the internal and externale SD cards. and places the step1 dload file on the external sd card.
But when my set reboot it show huawei logo and reboot again and again in a loop. I have tried to go in recovery by pressing voume up(+) With start button but it did not go to recovery mode. I connect my mobile with USB cable with my pc ,then i press both volume up(+) and volume down(-) with start button it shows pink screen. i have replaced recovery.img file with newly download file. But unable to go in recovery mode. then i have also replace the boot.img file with new boot.img file. But it still show the same result and reboot in loop again and again.
Now my battery is full discharged. When i connect it with the charger it run and again it goes to reboot loop.
I have try to get help from different sources but all in van. Please help me to find out the solution. and also how can i charge my battery.
Thanks & Regards.
Click to expand...
Click to collapse
I think you should take you phone to huawei Customer Service Supervisor
liuxi2012 said:
I think you should take you phone to huawei Customer Service Supervisor
Click to expand...
Click to collapse
Thanks for reply.
After a hard struggle i have find out the problem myself. i have downloaded the new files for image folder and replace the old image folder and with the new downloaded folder then i run the mobile. It still restart again and again. Now i have connect it with USB with computer and start the mobile. Now it run and start update by dload file. Now it run fine.
Last week, my yotaphone 2 informed that there is a system update from yotaphone. I downloaded and updated but then my phone cannot work. It show only black start screen with word "Android" until battery empty.
I tried to android recovery mode (hold power and volume up),
it show that the error is "e:cannot load volume /misc!".
And I do not know how to solve that problem.
Please help me!
leviet4 said:
Last week, my yotaphone 2 informed that there is a system update from yotaphone. I downloaded and updated but then my phone cannot work. It show only black start screen with word "Android" until battery empty.
I tried to android recovery mode (hold power and volume up),
it show that the error is "e:cannot load volume /misc!".
And I do not know how to solve that problem.
Please help me!
Click to expand...
Click to collapse
You can probably recover.
To reflash a full firmware image you could try the relatively user-friendly yotaflasher application and ROM images from here. I haven't used this myself, but it's software by Yota, so should be safe. You can ask it not to touch /data, to preserve apps, settings etc.
A less user friendly way to reflash a full firmware image:
- Download a full firmware image (EU 1.60 flashable version here, let me know if you require a different one)
- With the phone off, press vol down + power until you see "Downloading ...."
- If you can't turn the phone off normally, keep vol down + power for at least 15 seconds till phone reboots, keep holding till you end up with "Downloading ...."
- connect to a PC with adb+fastboot with a USB cable
- You can now boot TWRP image (fastboot boot recovery_twrp_yd201_alpha2.img , see here.
- if you have important files on your phone, you can back them up now by using adb shell/adb pull (e.g. adb pull /sdcard/Pictures/yeti_sighting.jpg)
- In TWRP go to advanced -> sideload and confirm
- now you can sideload a ROM image from the PC with adb sideload <image>.zip, it should show progress while it's uploading the firmware. If it errors, you probably haven't confirmed initiating sideload in previous step.
- wipe cache&dalvik and reboot
thank you, the first way worked and my phone runs normally now.
thank you
Help please
SteadyQuad said:
You can probably recover.
To reflash a full firmware image you could try the relatively user-friendly yotaflasher application and ROM images from here. I haven't used this myself, but it's software by Yota, so should be safe. You can ask it not to touch /data, to preserve apps, settings etc.
A less user friendly way to reflash a full firmware image:
- Download a full firmware image (EU 1.60 flashable version here, let me know if you require a different one)
- With the phone off, press vol down + power until you see "Downloading ...."
- If you can't turn the phone off normally, keep vol down + power for at least 15 seconds till phone reboots, keep holding till you end up with "Downloading ...."
- connect to a PC with adb+fastboot with a USB cable
- You can now boot TWRP image (fastboot boot recovery_twrp_yd201_alpha2.img , see here.
- if you have important files on your phone, you can back them up now by using adb shell/adb pull (e.g. adb pull /sdcard/Pictures/yeti_sighting.jpg)
- In TWRP go to advanced -> sideload and confirm
- now you can sideload a ROM image from the PC with adb sideload <image>.zip, it should show progress while it's uploading the firmware. If it errors, you probably haven't confirmed initiating sideload in previous step.
- wipe cache&dalvik and reboot
Click to expand...
Click to collapse
I have yotaphone model YD206, but I am in the USA and would like to root and load the best rom I can for my device, it doesn't even have google apps on it. Thanks for any and all help
Kevinreid1 said:
I have yotaphone model YD206, but I am in the USA and would like to root and load the best rom I can for my device, it doesn't even have google apps on it. Thanks for any and all help
Click to expand...
Click to collapse
Root the phone using methods written on this forum > download build 1.60 flammable zip > flash that.
If all you want is Google apps then root the phone then download and flash a gapps package. The full Yota build zip is recommended though.
Can't download yotaflasher application from the link... does anybody have the exe file?
SteadyQuad said:
You can probably recover.
To reflash a full firmware image you could try the relatively user-friendly yotaflasher application and ROM images from here. I haven't used this myself, but it's software by Yota, so should be safe. You can ask it not to touch /data, to preserve apps, settings etc.
A less user friendly way to reflash a full firmware image:
- Download a full firmware image (EU 1.60 flashable version here, let me know if you require a different one)
- With the phone off, press vol down + power until you see "Downloading ...."
- If you can't turn the phone off normally, keep vol down + power for at least 15 seconds till phone reboots, keep holding till you end up with "Downloading ...."
- connect to a PC with adb+fastboot with a USB cable
- You can now boot TWRP image (fastboot boot recovery_twrp_yd201_alpha2.img , see here.
- if you have important files on your phone, you can back them up now by using adb shell/adb pull (e.g. adb pull /sdcard/Pictures/yeti_sighting.jpg)
- In TWRP go to advanced -> sideload and confirm
- now you can sideload a ROM image from the PC with adb sideload <image>.zip, it should show progress while it's uploading the firmware. If it errors, you probably haven't confirmed initiating sideload in previous step.
- wipe cache&dalvik and reboot
Click to expand...
Click to collapse
glax87 said:
Can't download yotaflasher application from the link... does anybody have the exe file?
Click to expand...
Click to collapse
Just click on the YotaPhoneFlasher folder then click the file (yotaphone2_flasher.exe), and save to your harddisk.
Or you can try this link straight to the yotaphone2_flasher.exe file.
https://drive.google.com/file/d/0B0KC5E0zkBYmcHAzMEFKaHRvZ3M/view?usp=sharing
HOW
leviet4 said:
thank you, the first way worked and my phone runs normally now.
thank you
Click to expand...
Click to collapse
Dude I've just bought my phone, and it has the same problem. But I'm a complete noob, how did you fix it? Please, i've just bought it.
On RU build 134 when I tried to swap users my user with Defaut user, the phone blocked, the display is on (time is the same when first happend - just a freeze image) but I can't do nothing on phone. Is a way to reset? because on a normal way I would remove battery but yota dont have this option.
queser.info said:
On RU build 134 when I tried to swap users my user with Defaut user, the phone blocked, the display is on (time is the same when first happend - just a freeze image) but I can't do nothing on phone. Is a way to reset? because on a normal way I would remove battery but yota dont have this option.
Click to expand...
Click to collapse
The analogue method of pulling out the battery is pressing the POWER button for at least 10 seconds. The phone will reboot.
Thanks, I pushed vol down + Power and the phone restarted normaly.
PS: If you know where to get a book from Алекса́ндр Солжени́цын - Aleksandr Solzhenitsyn to read on yota display, send me.
SteadyQuad said:
You can probably recover.
To reflash a full firmware image you could try the relatively user-friendly yotaflasher application and ROM images from here. I haven't used this myself, but it's software by Yota, so should be safe. You can ask it not to touch /data, to preserve apps, settings etc.
A less user friendly way to reflash a full firmware image:
- Download a full firmware image (EU 1.60 flashable version here, let me know if you require a different one)
- With the phone off, press vol down + power until you see "Downloading ...."
- If you can't turn the phone off normally, keep vol down + power for at least 15 seconds till phone reboots, keep holding till you end up with "Downloading ...."
- connect to a PC with adb+fastboot with a USB cable
- You can now boot TWRP image (fastboot boot recovery_twrp_yd201_alpha2.img , see here.
- if you have important files on your phone, you can back them up now by using adb shell/adb pull (e.g. adb pull /sdcard/Pictures/yeti_sighting.jpg)
- In TWRP go to advanced -> sideload and confirm
- now you can sideload a ROM image from the PC with adb sideload <image>.zip, it should show progress while it's uploading the firmware. If it errors, you probably haven't confirmed initiating sideload in previous step.
- wipe cache&dalvik and reboot
Click to expand...
Click to collapse
Sir, i can't even get into recovery mode, i get this problem like it suddenly happen and my battery was 38%.. i was on facebook and it hang and then reboot and then stuck at "POWERED BY ANDROID".
I try to get into recovery mode by pressing volume up + power button, it restart again to "POWERED BY ANDROID"
When i pressing volume down + power button, it show downloding... , and i try to flash it using yotaflasher with HK Firmware 5.0.
When it is done, the phone reboot.
And it still stuck at "POWERED BY ANDROID"
What is the real problem ?
Please help!!!
While trying to solve the network issue on my Yotaphone 2 I managed to brick my phone. He is dead! But since it is a Snapdragon inside it can be fixed.
I need a help from someone who has rooted his Yotaphone2!
I need files from Yotaphone2 software: rawprogram0.xml and patch0.xml
Please!!!
hlmboy said:
Sir, i can't even get into recovery mode, i get this problem like it suddenly happen and my battery was 38%.. i was on facebook and it hang and then reboot and then stuck at "POWERED BY ANDROID".
I try to get into recovery mode by pressing volume up + power button, it restart again to "POWERED BY ANDROID"
When i pressing volume down + power button, it show downloading... , and i try to flash it using yotaflasher with HK Firmware 5.0.
When it is done, the phone reboot.
And it still stuck at "POWERED BY ANDROID"
What is the real problem ?
Click to expand...
Click to collapse
You need to keep pressing the power up button after the showing of "POWERED BY ANDROID", the power does not need to be pressed after then.
If you can still not reach recovery, you probably have a broken recovery (maybe wrong version) and something else is messed up.
When you flash recovery, you need to instantly go into recovery mode by pressing +/up on calling the according command
(fastboot reboot).
It does not look like you changed file system related things, did you change anything on your system/with root permissions?
Are you sure the installation process went without failure etc?
Getting out the cause (kernel logs etc) would be a bit hard without getting into recovery mode[and maybe also nonworking kernel], like stated out here
https://android.stackexchange.com/q...n-i-recover-files-from-a-phone-that-wont-boot
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
pepeline said:
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
Click to expand...
Click to collapse
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
amageek said:
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
Click to expand...
Click to collapse
My phone restarts right at the logo when i press power vol up and vol down
pepeline said:
My phone restarts right at the logo when i press power vol up and vol down
Click to expand...
Click to collapse
Shut it down amd press those 3 keys combo.. upon seeing Huawei Logo and vibration, release the Power key while holding the other 2... That ought to do it
Man, your phone is badly bricked. If you don't have at least access to fastboot, then you're screwed.
Good for me to I have the same problem. I was trying to get to stock ( I have made it several times), but the last time was a fail... The whole process of sending firmware was ok. then a reboot and brick.
Now the huawei screen and the short vibration appears and shutdown.
I was trying everything.
In device manager the phone is displayed as mobile devices \ volume f:\ (drive letter)
in connected devices the phone is detected as
hi6210sft
Phone is not detected in fastboot or ADB.
I met this problem yesterday(I hope the identical ). Because I have two booting animations, one from Vodafone, I guess I shutdown early during installation. It just froze. Then it didn't boot and stock recovery didn't help
My solution needs some recovery software like twrp. Press three buttons at the same time until twrp mode. Copy zip file for SuperSU to phone or sdcard, then flash it. After that my phone works again.
You mentioned that you cannot start recovery. Try more. After installing twrp, starting it is quite annoying. Sometimes it just doesn't start or stock recovery starts. An alternative way is to go to whatever mode, and try adb or fast boot to reboot to recovery. Pressing button requires techniques which j don't have
I can't enter TWRP non combination is working for me. Installing firmware using dload from sd card also.
okay if non of these worked you can try flashing the whole update.app file by fastboot..
tools you will need
1- download the official huawei firmware from the official site
2- download Huawei Update Extractor
3- download minimal adb and fastboot
check the unbricking chapter of this thread
Note: to get in fastboot make sure you connected your phone to computer and press the vol down and power down buttons.. if none of these worked your phone is hard bricked .-. .. try opening the phone and reconnecting the battery worked with someone
if you need any help just pm me or replay on this thread hope that help you
Ok thx. I have already opened the phone to reconnect the battery
And then I was trying the combinations;
Battery connected vol- +power - Huawei logo and vibration and shutdown, no fastboot
Battery disconnected, vol-+power and connecting cable to phone - the same
Battery disconnected combination vol + vol - + ppwer, with sd card dload, the same
Battery connected combination vol + vol - power, sd card dload, the same
Any other suggestions?
The phone is recognized in Windows in device manager as mobile device as volume with a letter, I cant change the drivers to the right ones. I can't enter the storage it's unrecognized format.
Any other suggestions?
mercom said:
Any other suggestions?
Click to expand...
Click to collapse
it is easy to suggest others.. I too advised you.. but today i am facing the same problem...
what I tried:
Reinstalling the same ROM using dload method
Upgrading to other ROM (using both dload and flashing 4 image method)
Downgrading
Restoring from the backup
At one point, the phone booted up all well except the Wifi Module... So I flashed another ROM and stuck again...
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
yes, mine too... or I could say flashing succeeds but there's some problem with the boot partition... will get my phone today from the Customer Care and try again (if they can't repair).
you can try removing the back cover and unplugging the battery... that is one of the few things I will do today as I get my phone back..
mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
ok made it back.. just flashed the boot.img from b594 (the one I was using when my mobile got bricked)... somehow made it back. But now I am having a problem with the battery. It doesn't charge when the device is switched on, only when the device is switched off... will see for few days, if there's problem will take it back to service centre again
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
mercom said:
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
Click to expand...
Click to collapse
Switch off your device and then connect it to PC but just hold the volume- key.. that should get you in fastboot mode... I did that and then flashed the boot.img of the current ROM. This should boot it up...
Nope it doesn't work I was trying it already
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
roosta said:
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
Click to expand...
Click to collapse
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
LesterDMolester said:
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
Click to expand...
Click to collapse
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
roosta said:
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
Click to expand...
Click to collapse
Try downloading an older firmware extract the contents of the .app file using huawei firmware extractor and flash system.img recovery_ramdisk.img oeminfo.img product.img and vendor.img using fastboot and if the phone boots up just update it to a newer firmware, that's how i did it to my P10 Plus, it didn't wanna download via eRecovery too, sorry for the misunderstanding i forgot that it doesn't wanna download for you, i don't have the device with me now because i broke my display (again) so it's getting fixed but it won't be done untill saturday, i'll upload the firmware i used so that you can try too.
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
LesterDMolester said:
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
Click to expand...
Click to collapse
Thanks Lester I will try this when Ian home and let you know how I go...
roosta said:
Thanks Lester I will try this when Ian home and let you know how I go...
Click to expand...
Click to collapse
Dude pls wait don't try this i found another way, i bricked my phone accidentally today and i found a way, gonna take me some time to explain but i'll try my best.
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Hi Lester, it's been an eternity since I was online here as I put this on the back-burner with more pressing work and family priorities. Thank you very much for providing the files. I noticed the ROM firmware is EU, when i am outside of EU....but shouldn't be too big of a problem.... I am getting around to doing all of this now, I have downloaded the files. When are you typically online to chat about this?
RoOSTA
It cannot boot into TWRP, only the eRecovery. No option to flash anything on SD card, other than connecting to WIFI...
Hii roosta,
I might have some problem with you, let me facing your thread , I 'like to learn too how to make my P1o plus back to normal again, it's being long time for me to bring this up...
LesterDMolester said:
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Click to expand...
Click to collapse
I had try to download from ( https://androidhost.ru/29Qt ) ....but its need much time event with IDM ( 20hrs ) )