Hi guys just bought HD2 and i love it
I read in the forum mentioned that HD2 can be upgrade to WP7...is stable...if i want to upgrade it to WP7 how can i do it is there any links that i can follow as a guide
thnks in advance
all what you need is here
http://forum.xda-developers.com/forumdisplay.php?f=977
it's 3 ROM available for use (you choose which one you want):
- 15.DEC 23.Langs HD2 Pdaimatejam Rom Wp7.5 mango 7740 v3B (v4 be released soon)
- [ROM] Back to the Future [XBmod-Yuki] [7740]
- [ROM][22LANGS] 11.11.11 HD2O© v1.23b1 WP7 FINAL MANGO [online]
for all ROM's install procedure is almost same (for more details look in ROM topics) :
- Flash original WM6.5 if needed
- prepare microSD card formatted to FAT32
- Flash HSPL 2.08 if needed
- Flash MAGLDR 1.13
- in MAGLDR use:
* 10. Services, 4. UseLast24NAND
* 10. Services, 5. ClearSD MDR
* 5. USB Flasher and run DWI.exe to flash ROM
- after flashing done, do hard reset (Settings - About - reset my phone)
Related
phoenixtraveller said:
0. Start all over again - forget everything - to avoid over-partition resizing etc and fragging of your nand which is causing people's hd2 phones to crash and DIE.
1. Put your stock rom ruu_signed.nbh on sd card as LEOIMG.nbh (<4gb card)
2. Reflash that by holding vol down - hspl.
3. Reboot and dont got into it - goto new (old) spl.
4). Connect and do HSPL3_PKG.exe, We hacked it. Best to NOW change your drivers to MTTY drivers (first point you can as hspl rapitool doesnt recognize them so change to unsigned drivers now) and connect then do:
task 28 55aa
task 29
task 8 (which is reboot)
YOU NEED TO CLEAN IT OUT WHEN FLASHING OVER AND OVER AND OVER or you end up with fk hd2 with too many bad blocks in nand and screwed partitions.
5.) Now re-do your radio with latest by replacing LEOIMG.nbh with ruu_signed.nbh from radio rar/zip. = ie 2.15 radio and vol-down reboot hspl again.
6) Now replace LEOIMG.nbh with MAGLDR 112 .nbh as LEOIMG.nbh on sd and
YOU ARE DONE.
7A) Jump down to replace data.zip 7B) before you Run dwi.exe and install Windows 7 then do ChevronWP7 hacks/etc and get LIVE. note: SOMETIMES helps to pull battery out not press vol down twice at 1234-5-6 (go go go) point - ie: first HARDRESET per Cotulla and DFT instructions. and CLEAN 8gb class 10 SD-card SANDISK is best and OEM (but faster).
7B) .........final.....stage.....here....
Continuing on: wp7 CLEAN: WORKS:
Before doing dwi.exe PROPERLY: make a fake data.zip with EMPTY (ie: notepad make 0kb .txt files then rename part00.bin, part01.bin, ALL THE WAY TO part07.bin and save these into data.zip (rename real data.zip data.bak or whatever).
Then flash with dwi.exe so this CLEANS OUT PARTITIONS COMPLETELY with ZEROES.
now: notes:
SOMETIMES helps to pull battery out not press vol down twice at 1234-5-6 (go go go) point - ie: first HARDRESET per Cotulla and DFT instructions. and CLEAN 8gb class 10 SD-card SANDISK is best and OEM (but faster). Run dwi.exe and install Windows 7 then do ChevronWP7 hacks/etc and get active microsoft= LIVE!
Also - questions:
Anyone take note and/or mtty'd or used Cotulla's SIMULACRUM SPL (LEO 1000 SPL here)? ie: pressing just vol down gets you to wp7 spl before it boots (after magldr of course - 1234 vol down). I have reverse engineered daf.exe/dwi.exe and binaries+ using 24nand+ and dumping/mttying have been able to crack a few commands for this strange but necessary second-second-program-loader. Anyway - TO CLEAN YOUR PHONE wp7-method do this and (this is the both normal winmo and my replaced data.zip NEXT STAGE CLEAN after the above oem/stock/winmo and spl cleaning by sd... save the life of your hd2 for another year...
(nb: you can also do daf/android way with NO FILES .IMG at all - just use flash.cfg with 0 asize allsize and no boot, system, ro, nothing: just those 3. ie: partition name is 0. dont even have to name a file system. Although is interesting that daf.exe has strings in it for both: SquashFS, and WPH. !!! this is daf.exe not dwi.exe ...) hmmm.
Ok...now...go...
LIVE!
Click to expand...
Click to collapse
Hello,
I have done these steps:
1. Put your stock rom ruu_signed.nbh on sd card as LEOIMG.nbh (<4gb card)
2. Reflash that by holding vol down - hspl.
3. Reboot and dont got into it - goto new (old) spl.
and now my phone says I have SPL 3.03! I cannot flash any other SPLs anymore.
Please help....
what I am missing?
Thanks in advance
This seems like something good to do, but the instructions are very difficult to follow. If someone who understands the OP instructions could rewrite the them, that would be appreciated. Thanks in advance.
Dears,
I tried many ways & installed many things on my htc HD2 to run Android FOYO 2.2 with windows 6.5. (Dual Boot) . but all are failed
my device details:
Mofel No: HTC HD2 T8585
OS Version: 5.2.21869 (21869.5.0.82)
Manila Version: 2.5.19211619.0
ROM Version: 1.66.415.4 (76641) WWE
Radio Version: 2.07.51.22_2
External SD: 8GB
===============================
PB81100 SS-BC
SPL-2.08.0000 8GB XE
===============================
Please help to find soulation.
Ok first off I think you probably need to update your Windows Mobile ROM cause you have a older ROM and this could be the cause of not being able to boot your SD Andriod build to work on your HD2. Go to HTC.com and look for the latest official ROM for your HDW T8585 but make sure it is for your spacific phone, you should have to varify by typing in your serial number or something like that. Download the update and flow the instructions to flash it.
Also please post some more information about what you have tried to do and what the exact problem is please.
Here's the fast, easy way to do it, you'll have to read up for more ramifications and options:
1) flash HSPL
2) Flash the WM6.5 ROM of your choice
3) Flash 2.15.00 radio
4) put the SD Android build of your choice on SD
that's all, you will dual-boot just fine.
just run clcrd and haret when you want android.
orangekid said:
Here's the fast, easy way to do it, you'll have to read up for more ramifications and options:
1) flash HSPL
2) Flash the WM6.5 ROM of your choice
3) Flash 2.15.00 radio
4) put the SD Android build of your choice on SD
that's all, you will dual-boot just fine.
just run clcrd and haret when you want android.
Click to expand...
Click to collapse
Or you can skip the first 3 steps by flashing a 3.14 ROM
Edit : Must be an official rom
well yeah I was assuming you wanted an actually good WM6.5 ROM and not the crap stock.
I will try & inform you back thanx.
I can tell you know the problem was your radio, once you update it to 2.15.00 you will run Android fine.
Thanx to all for support. I found the solution.
I did the follow:
1ST : RAN HSPL3_PKG ; MAKE IT (SPL-2.08. HSPL)
2ND : INSTALLED RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
3RD : INSTALLED FroyoStone_Sense_V2 (Android folder) into SD Root.
Working great but only 2 thing:
a) calling or receiving calls there is a buzz sound.
b) after download update from internet by wi-fi, it's asking me to install. but device keep restart ????
----------------------------------
I will trying to find a good & stable OS
find my rom update
I need arabic support for Android?
any one can advice me?
OS : Windows 6.5
OS on SD Card: Android 2.2
no one here , hellooooo!!
anybody home??
Dear forum members,
YES!!!
I successfully created my 1st custom ROM for the Mozart Windows Phone with the new HSPL by cotulla
I used as a base this ROM:
RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50.10U_NoDo_by_ansar
The custom build has the ability to be unlocked and to upgrade to MangoB2 thru zune
In my next build i will try to include mango and dfrouter for those not sync to zune
Thanks to my giant friends ervious, mamaic, bepe and cotulla
I hope to upload it today [edit: done] and some day to create an hspl too!!
///////////////////////////////////////////////
[CRI] Custom ROM Index for Windows Phone Mozart
///////////////////////////////////////////////
Download Link RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50.10U_NoDo_custom_by_ansar
///////////////////////////////////////////////
This ROM supports:
- Chevron unlock and
- MangoB2 update to 7403 and 7712 and
- does not include SPL in order HSPL to be retained
All other elements are as in stock relevant ROM of version HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50.10U_NoDo
///////////////////////////////////////////////
The provided ROM can be flashed to all RSPL / HSPL supported operators:
- hTC_Asia / hTC_Asia_SEA / hTC_Europe / O2_UK / Orange_FR / Orange_UK
- SFR_FR / TELSTRA / TMO_AT / TMO_CZ / TMO_DE
///////////////////////////////////////////////
There are not known, yet, unsupported operators by RSPL/HSPL
///////////////////////////////////////////////
ROM installation instructions
To install the ROM follow these steps:
- install RSPL and select your ROM version X.YY
- install HSPL
- unzip the downloaded zip file and run ROMUpdateUtility.exe
///////////////////////////////////////////////
MangoB2 update instructions
To update in MangoB2 you must in your PC/Laptop:
- download my NoDo_Public_by_ansar.zip and Mangob2_Public_Trial_by_ansar.zip
- uninstall WPSupportTool-x86.msi or WPSupportTool-x64.msi and
- install Setup-UpdateWP-x86.exe or Setup-UpdateWP-x64.exe
- install StartZuneLocal.exe
///////////////////////////////////////////////
MangoB2 Chevron unlock instructions
A. To retain Chevron unlock on MangoB2 in 7403 perform the following in windows phone:
[Optional steps]
- Uninstall Connection Setup after ROM flashing
- Sign in to Windows Live and
1. Run Marketplace, select HTC Apps and select Connection Setup
2. After relevant prompt Power off and then Power on your device
- Repeat above 1 and 2 to install Connection Setup
[End of optional steps]
- Deploy my Unlock_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Deploy TouchXplorer.xap
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Remember: do not run Connection Setup now
- Update to MangoB2 7403
- Now run Connection Setup
- Check that you are unlocked by running TouchXplorer
B. To retain Chevron unlock on MangoB2 7712 perform the following in windows phone:
[Optional steps]
- Uninstall Connection Setup
- Run Marketplace, select HTC Apps
- You maybe wait some minutes for Connection Setup to appear
- When Connection Setup appears install it
[End of optional steps]
- Deploy my Update_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Run Connection Setup
- Deploy my Unlock_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Remember: not run Connection Setup now
- Update to MangoB2 7712
- Wait for update to finish
- Now disconnect from usb cable and enter SIM pin
- Now run Connection Setup
- Check that you are unlocked by running TouchXplorer
///////////////////////////////////////////////
Till next version enjoy!!
Regards, ansar
waiting for your mango build...
Thanhs ansar. Great your job!
Thank you!
Can't wait to flash!
use ansar's method to go all the way to RTM 7720 and Chevron unlock is still working (e.g., i can still use TouchXplorer). i basically repeated the steps for 7712 again for 7720. thanks!
followed all the instructions 30x everytime i update to isv beta 7403 the phone is relocked as when i try to use touchxplorer it say ms has revoked this app please uninstall ????? any help
I previously used "RUU_Mozart_HTC_Europe_1.28.401.04_5.52.09.16_22.33a.50_RELEASE" which had a colour banding problem and upgraded that ROM all the way to MANGO RTM and the colour banding still remained which was very annoying having spent 2 hours+ completing the proceedure.
I've just flashed this version and I still have the colour banding issue.
When I tried the DFT 7113 ROM, it resolved the Colour banding issue.
Reply to ThreadThread: [Custom ROM]RUU_Mozart_HTC_Europe_1
thanks
Mirror?
Any mirror links? RapidShare is not so friendly in my area.
Whenever I clicked download, the page just refreshes itself. No download link, countdown timer or whatsoever.
here is a mirror by uploaded.to
http://uploaded.to/file/wdbndyqg
nice!
V8Turbo said:
here is a mirror by uploaded.to
http://uploaded.to/file/wdbndyqg
Click to expand...
Click to collapse
Thanks for the mirror!
Updated to 7720 with unlocked.. Wish i could change the accent colour though.
Anw, thanks ansar for the great work!
I also did the ansar unlock method for my mozart
when it is 7712 my touch explorer is working but registry editor is not opening at all
why it is?
Can any one help me..........
I am having problems getting to Mango (7720)...
I used this custom ROM, then did the update to 7403, its all good and still unlocked but Zune does not find any newer updates?
I have updated Zune to the latest version as well (4.8.2345.0).
Anyone with the same problem, anyone know how to get it sorted?
Thanks
Same for me so back to DFT 7714...
have u updated with update tool ............
then try update it will show update
I have done like that only and i updated.
i used in zune 4.8.2345
go2xraj said:
have u updated with update tool ............
then try update it will show update
I have done like that only and i updated.
i used in zune 4.8.2345
Click to expand...
Click to collapse
I am quite sure I have... Can you give me a link to the update tool just incase.
So I have Zune installed, then I run the update tool and then Zune will give me updates after 7403?
Do I need to have all of the Zune processes closed when I run the update tool - or just the zune.exe or does it not matter?
Thanks
You have to close the zune when update tool is running and I have attached one more thread.
Follow the instructions which is in this thread and try http://forum.xda-developers.com/showpost.php?p=16594869&postcount=2
go2xraj said:
You have to close the zune when update tool is running and I have attached one more thread.
Follow the instructions which is in this thread and try http://forum.xda-developers.com/showpost.php?p=16594869&postcount=2
Click to expand...
Click to collapse
AWESOME!!
Thanks soo much. After 3/4 hours I finally got it sorted.
So I reflashed with the custom ROM, uninstalled Zune and the update tool (Phone engineer flashing tool).
Then followed the guide you gave me and it eventually worked. Took forever to update to 7712 as the update seems biggish (150-250MB I am guessing) and installing it on the phone takes 45 minutes + easily.
Then my next problem was getting to 7720 - I had Zune 4.8.2345 where I needed version 4.8.2134.0 once I had that installed the bat file ran fine and phone updated to 7720 perfectly.
Also I suspect the reason it did not work the first time was due to the guide I was following. The mango unlocker files:
Unlock_Mango_XBMODDeployer.xap
Update_Mango.XBMODDeployer.xap
Note the one has the _ before the XBMOD and the other the . before the XBMOD - the guide I was following never said I needed to use the one with the . and that is the only thing I can of which may have made a difference (Although the zune versions may have made a difference).
Thank you for your reply and one more thing I can tell you is that u can update through Zune 4.8.2345
Regards
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
Mmm good news. I will maybe try if someone reply to this please:
- Is HTC application working; like Accent Theme changer, Registry editor or TouchExplorer etc... ?
hi i am a noob needing help im after windows phone 7.5 (mango) on my uk o2 htc hd2 but i am very confused and need a step by step guide i'm currently running window mob 6.5.5 (Artemis ver65.0) which i bought with the rom already installed any help will be much appreciated thanks
simple steps to install WP7 ROM to HD2:
1. Check HSPL in booloader screen... you must have (install) 2.08 HSPL
2. insert formated microSD card
3. install Radio 2.15.50 (first boot to bootloader then connect device and run flashing)
4. install Magldr1.13 (first boot to bootloader then connect device and run flashing, after process done device restart and boot to Magldr menu)
5. Enable 24MB extra memory in Magldr services (select 10. Services - 4. UseLast24NAND, confirm with green)
6. Delete MBR on SDcard in Magldr services (10. Services - 5. ClearSD MDR)
7. In Magldr select 5. USB Flasher, connect device and flash ROM with DWI.exe
8. wait process done, and when WP7 booted do hard reset (GO to Settings - About - Reset my phone)....
and thats done...
after WP7 installed, you must have .net Framework on your computer, also install latest Zune and get Live ID key from Microsoft (with chat or phone)
also install WP7 SDK and with Tom XAP Installer you can istall XAP's to device....
thanks for the fast reply im runing SPL - 3.3.0000 XE
wer do i get the wp 7.5 rom from
HSPL (you must install 2.08 HSPL)
http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
Radio 2.15.50
http://www.multiupload.com/QP0IWGY42F
Magldr1.13
http://forum.xda-developers.com/showthread.php?t=893618
HD2O Mango v2 ROM
http://forum.xda-developers.com/showthread.php?t=953078
link direct: http://www.rhiffsta.ch/HD2O_Roms/HD2O_1.22_LEO71_7720.rar
Zune
http://www.zune.net/en-us/products/software/download/default.htm
.net Framework 4 (if you need)
http://www.microsoft.com/download/en/details.aspx?id=17851
WP7 SDK
http://www.microsoft.com/download/en/details.aspx?id=13890
Tom XAP Installer
http://forum.xda-developers.com/showthread.php?t=860964
Hi, I have a new problem. Installed a ran DFT_LEO71_TEST. Ran DW install which loads raptool. This looks good, I get the 4 colours on the phone as per the various You Tube vidoes. The raptool says its looking for USB connection which its currently connected to. Then bombs out with the following error message:
"An error message has occurred.
Read below for more information.
ErrorDescription: USB init failed
INfo:\RSPL|RSPL.cpp(1198)"
What is the solution to this USB problem?
procedure for upgrade to WP7... all WP7 have same install (flash) procedure... if WP7 already installed, just enough is last two steps...
- Flash original WM6.5 if needed (HTC EU ROM) or do hard reset on WM6.5
- prepare microSD card formatted to FAT32
- Flash HSPL 2.08 if needed
- Flash MAGLDR 1.13
- in MAGLDR use:
* 10. Services, 4. UseLast24NAND
* 10. Services, 5. ClearSD MDR
* 5. USB Flasher, connect HD2 with USB and run DWI.exe to flash ROM
- do hard reset (Settings - About - reset my phone)