Hi all.
I start by contemplating the fact that there are quite some portuguese members arround.
Força Portugal
I just got hold of a O2 Xda Orbit. It has windows mobile in english and I want to put it in portuguese.
I don't know how
I have been reading about the ROM's in portuguese but I am afraid of just upgrading without knowing what I am doing.
That is why I am now requesting you guys to point me in the right direction
Device Information:
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
-
Also I don't have (yet) ActiveSync installed on my computer... do I need it?
thank you in advance...
Tiago Geada
cusco
Brief step by step plan
vigaro said:
Hi all.
<question>
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
Also I don't have (yet) ActiveSync installed on my computer... do I need it?
cusco
Click to expand...
Click to collapse
You do need ActiveSync for XP or older, or Windows Mobile Device Center for Vista (download the latest version from Microsoft).
In general you have to do the following steps:
1. Connect your Artemis to the computer using a USB cable.
2. Do NOT make a partnership. If you get a wizard or popup, just cancel/quit it.
3. obtain the rom of your choice (it sounds like you've allready found a PTG rom)
4. make sure your Artemis is CID unlocked. If not, use artemis USPL for this.
5. run RUU.exe or RomUpdateUtility.exe which is usually provided with the rom. If not, find a recent version HERE. If you use a RUU.exe not provided with your rom, just remove the old rom (a large file with the extension .nbh) and put your rom in the folder with RUU.exe
6. Follow steps on the screen. Read the information / caution rules, press next a few times, then press update.
7. The Artemis will go into boot loader mode (first a three color screen, then a grey one with a white/blue progress bar)
8. wait some time, until the wizard says you're finished
9. The Artemis will reboot. Wait for it to completely start windows, then do a hard reset (push both softkeys and the reset button, release reset button after a few seconds). This way you make sure your rom gets flashed well
10. Wait for the progress bar to end again and for windows to start
11. Start calibrating your screen and customising windows to your needs.
This should do it
I have an htc P3300 art 100 I never updated PocketPC! currently has:
Microsoft "Windows Mobile" 5.0
ROM version: 1.12.408.1 ITA
Date ROM: 09/12/06
Radio version: 02.67.90
Version: Protocol: 4.1.13.28
Version ExtROM: 1.12.408.8006
Hardware: CPU: OMAP850 - speed: 201 MHz - size RAM: 64 MB size Flash: 128 MB - bus data: 16 bit - size store: 37,63 M - resolution display: 240 X 320 - colors: 65536
Tom Tom NAVIGATOR 6
1 micro SD 2 GB I loaded map tomtom Europe v6.75 and various PDI for a total di1850 MB.
Given that the site of the htc has lifted the updates of Windows Mobile that htc.
Who can help me with clear steps to update my htc P3300?
Having said that I have a notebook with view 32-bit with a usb with pochet PC connection "Centre management devices floating Windows"
Please help!
Thank you.
i suggest u take a look on forums on how to installate a custom rom, but since its friday and i am always ready to go home from work i thought, lets be helpfull lol
step one: by the looks on what u write u dont have activesync installed on the laptop: go download Activesync from Microsoft website
step two: read the following topic http://forum.xda-developers.com/showthread.php?t=311403 and in that way u can unlock your phone for custom rom flashing
step three: download and install a custom rom of your choice. U could try to start with one of the roms of Shady313. They are downloadable @ http://forum.xda-developers.com/showthread.php?t=546805
be very carefull what u do, try to read several topics first like http://forum.xda-developers.com/showthread.php?t=308242
look around on the artemis forums and read the topics which concern flashing rom subjects.. u might learn a bit before you start flashing [or wrecking ] your phone
Hello, you original wm5? I have problems with the P3300, is cid locked, if you please upload somewhere wm5.and do not make the mistake of another rom on the phone without unlock CID first.
Yes, the original wm5.
How to update your HTC Artemis
Those having questions on flashing (i.e. updating) their HTC Artemis could try following these steps 1) Backup e.g. PIM Backup 2) disable standby and hibernation then remove SIM & SDHC cards 3) if necessary then cid unlock 4) recommend hard reset or update to the latest official build 5) if necessary Update SPL to latest 1.11.cmon 6) flash new rom then hard reset 7) put in SIM & SDHC cards and enjoy the result of the hard work by the developer
Also check out this thread Uspl/rom upgrade/tips&tricks
Cheers
Tom
Specs-
OS:
5.2.21892 (21892.5.0.89)
Manila Version:
2.5.20121412.2
Rom Version:
2.13.531.1 (90963) WWE
Radio Version:
2.10.50.26
Running the HD2 from Tmobile (578mb).
Issues-
When I run Leo_CustomRUU with the radio firmware (Eugenia Project - HTC HD2 Radio ROM - 2.12.50.02_2) renamed to RUU_Signed.nbh - it goes through all the prompts and it will eventually stop with an error message about communication errors with usb.
I tried several ports and even hooked up an older system to make sure it was not my rig. The usb on both machines works fine with activesync or as as mass storage device perfectly.
I was able to flash with HardSPL3 without a problem (got the We hacked it screen).
Yet, when I tried to flash the radio it gives me that communication error. If it helps I also get a similar error when trying to flash the room (I tried Energy.Leo.21679.Sense2.5.Cookie.DinikGlass.Sep.24).
Why am I trying to flash the radio firmware? My ultimate goal is to run Froyo. I have copied to the Android folder on my SD card a version (despite my best efforts to be specific on all other aspects, it escapes me the version I am running. I know it is froyo, I just do not recall the builder or version) and I am getting the dreaded robotic voices when I try to make or receive a call. So, rather than troubleshoot my android rom, I am looking to downgrade the radio and see if that solves it as from the pages I have read this seems a likely culprit.
I thank all in advance.
Update:
I found out that using HSPL3_PKG had not put my phone back to 2.08HSPL as it said.. it was still at 2.10. So, I tried highlighting the 2.08 regular, and it did go down to it. Yet, after trying three more times, it is not taking the 2.08HSPL. Anyone have any ideas?
Fixed:
Fourth time is the charm? Works now though.
Did you make sure you have an ActiveSync connection before trying to flash anything?
Dr.Jekyll,
Yes. When I connect the USB it asks for which way I wish to initialize it, I choose ActiveSync. That program starts up, syncs and stays green in the system tray.
I then double click on the Leo_CustomRUU program and click through the steps, the HD2 goes to the HTC with the progress bar as well as the program's progress bar.
It just sits there and does nothing. After about six to eight minutes, it will just speak of a communication problem and error out.
I do not know if this matters, but I am running XP Pro SP3 and ActiveSync 4.5.
Hi,
Why not flash from SD?
1. Rename the .nbh to LEOIMG.nbh
2. Copy to root of sd card
3. Shutdown device
4. Hold vol down and power
5. Follow the introductions
6. Press power button to flash rom
As taken from http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=615095
I seldom flash through ActiveSync WMDC, always from Storage card.
Cheers,
/Cacti
Hello,
I'm new here, and with rooting.
I tried to root my htc dream first, but i failed haha,
So now i have the HTC Leo HD2.
Im really happy with it, but i miss the apps of android.
So i wanted to root from windows mobile into android 2.2
So i rooted and opened the files, and when it boots up it gives much codes, and then it says : Jumping to kernel.
It stops out there and i waited very long.
I only putted the android folder unzipped in my SD card.
But, i readed things of HSPL and the right rom ..
I don't understand those things at all.
So i hope you guys could help me..
Radio : 2.06.51.07
Rom: 1.66.404.1 (76641) NLD
Rom Date 01/14/10
Protocolversion : 15.30.50.07U
Manila (?) version : 2.5.19211619.0
Version of OS : 5.2.21869 (21869.5.0.82)
Dont know if you need this but yeah..
Sorry for my english, i'm only 14 years old and from The Netherlands.
Thanks in advance!
You need to change your radio to 2.XX.50.XX version. (2.14.50.xx is fine)
You are using the word "root" wrong. HD2 android builds are already rooted, you don't need to do anything. Just update your radio. (first flash HSPL before attempting to update radio)
HSPL from: http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
Radio from: http://forum.xda-developers.com/showthread.php?t=611787
Also after those you need to flash a new winmo rom. Your winmo rom is too old. For example: Energy rom http://forum.xda-developers.com/showthread.php?t=591784
@memin1857 thanks mate!
I've a problem it says this when i try to install the HSPL:
CRITICAL ERROR
Flow: 00000001
Error code: 00000002
Description: USB Connect failed!
But ive my phone into the usb.. :S
make sure youre connected to windows mobile device center.
Start the phone-> Connect with ActiveSync
You have to install MS Active Sync (dunno if it's free, got it on my business notebook) or something that enables you to establish a connection with your phone via Active Sync.
Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.
ibrahim-windeck said:
Hi,
I hope you can help me and although I have my cell phone HTC HD2 get but with SPL 3.03.0000 I would like Android rom instalation but before I do so with HSPL3 THE ERROR IS NOT flash is what I have to do one probably you have an idea ?
MFG
Windeck
I'm sorry I'm not that perfect in English I am from Germany.
Click to expand...
Click to collapse
SPL 3.03 isn't compatible with HSPL sir.
But you can run Android on your Stock Rom 3.14!
Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2
somaking said:
Hmm. I've got spl 3.03.0000, can run android from sd... But am getting the 'robot voice' on calls, even though I hit CLRCAD before running Android.
Any ideas?
Cheers,
cP
Edit... Just tried a different version of android & it works perfectly. No HSPL req'd.
FroyoStone_sense_v3.2
Click to expand...
Click to collapse
Hi, I am a complete n00b at this but I have spl 3.03.0000 as well on my HD2 and I want to run android with sense - considering the FroyoStone Sense v3.2 like you have.
Before anyone completely grills me... I've done my research and downloaded everything I needed up until I came across a few posts on xda about not needing HSPL3 and radios etc if I had spl 3.03 on my phone because Android can run on spl 3.03.
I came across this post and didn't want to miss the opportunity to ask. So my question is, do I still proceed with flashing HSPL3, installing a radio, flashing a custom WinMo rom (ie. Energy's rom), format sd card and putting Android on it, then do the CLRCAD and haret to run Android?
Or (correct me if I'm wrong), can I simply format my sd card and put Android on it and do the CLRCAD and haret in order to run Android, without doing anything to my phone?
I do appologize for being long winded, it seems like we both have the same spl 3.03 and want to use FroyoStone Sense v3.2, and since you got it to work, I wanted to know how you did it.
Any help would be must appreciated,
Cheers!!
When you have SPL 3.03 on your device, don't tray to install HSPL. installing HSPL over SPL 3.03 isn't possible.
and installing a SPL 3.03 ROM over HSPL will limit your program memory to +/- 50Mb. (except on T-mous devices)
Android is compatible with latest stock ROM (SPL 3.93 / Radio 2.15)
If you have robotic voice, try to change the Kernel version.
You don't need to do something special on your device in this condition. Just format your SD card and put Android on it, and run the CLRCAD and haret in order to run Android.
Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/
Creativus said:
Nah, is there any chance to install cooked rom on SPL 3.03? I had a problem with volume up button, it didnt work and I gave HD2 to HTC and they returned it to me with SPL 3.03 not 1.66 as I had before. :/
Click to expand...
Click to collapse
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Is it possible to downgrade software? For example if I'm running 1.66 now and wish to try the newest rom but find that I do not like it, could I downgrade back to 1.66?
west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
Thanks dude, I'll give it a try right now.
EDIT:
IT WORKS! BIG THANKS!
west_widgeon said:
yep, you can have cooked roms on spl3.03 by sspl. sspl will fake the spl version just for flashing purpose but not really change anything, thus no impact to warranty. search it in the rom forum and you can easily find it.
Click to expand...
Click to collapse
What if i need to go back to the stock ROM, do i need to run stock rom again or just use the wipe all function?
Ask how to install android for a European version of HD2
I want to install android for my running HD2 ship rom 3.14.707.3,
2:15 radio contest to select the appropriate version of android to do, I heard that Android can run on hd2 (512) HSPL forward without your help, many thanks.
Same Rom other Problem
Sinds i have the 3.14 stock rom from HTC i get a the error i cannot install unsigned apps, and so i cannot run Android roms etc..
What is the easyst way to fix this.
Marc.
Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.
Did you run the ROMUpdateUtility.exe as Administrator???
You MUST run it as Administrator or it will not work correctly.
juniogyn said:
Here it is what happens one more time, maybe you can spot the mistake.
Disable USB connection.
Windows 2008 (Vista) >>> followed guide to change driver >> driver changed.
Enable USB connection.
Activesync fine, synched one last time.
Unzip [P3600i] HardSPL v1.1
Start ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next > Next >
it shows > Image version : 3.00.707.17
Update.
From : Image version : 3.00.707.17
To : Image version : 3.10.Olipro (not 3.20)
Next , next
phones goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.10.Olipro
ROMUpdateUtility.exe says ERROR 260 > Exit
Unplug ...
Start same ROMUpdateUtility.exe ([P3600i] HardSPL v1.1)
Next ,
Plug in .. still tri colour >> shows USB
Next
ROMUpdateUtility.exe shows : Image version : blank / Only Update button.
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next . .next
Goes gray progress bar stays 0%
Utility is working .. says updating ...
Phone still gray + 0%
Utility says ERROR 262 : UPDATE ERROR
Recovery.
Asks to unplug phone from USB (phone still gray 0%)
Next .. asks to take out battery.
waited 3 seconds as asked. Placed battery back.
On start phone goes to tri colour and shows : TRIN100 / IPL-1.00 and TRIN100 / SPL-3.03.0000
Recovery asks to plug back in.
Next ..
Image version : blank , Update (only possibility)
Update.
ROMUpdateUtility.exe shows : From : Image version : blank / To : Image version : 3.10.Olipro (not 3.20)
Next , Next
Phone goes gray and jumps from 0% to 100% (bar is dark green btw).
phone reboots into Windows as if nothing happened.
ROMUpdateUtility.exe shows : ERROR 270 (UPDATE ERROR) , The image file is corrupted please check your Update utility.
Exit.
Phone boots old windows .. Tricolor shows original SPL.
Click to expand...
Click to collapse
HELLO
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?
flopesneves said:
I have a problem when a install android in my HD2 in SD card... when i run it, it works well but when a try to take a photo or someting like that e gave me an error in SD card...
can any one help to resolve the problem?
Click to expand...
Click to collapse
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?
HI
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
kurt-willems said:
With some more information it will be easier to help.
Witch Android build are you using?
Witch error do you received?
Click to expand...
Click to collapse
flopesneves said:
Iḿ sorry...
I have a SD card of 2Gb
when i restart my HD2 it sais:
R 2.15.50.14
G 15.42.50. 1 1U
D 3.14.04666
I've install the file: SuperRam.Sense_V0.1 like in this link: w
ww.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
and it works but when i try to take a photo it sais "insert SD card"
when i go to the gallery it sais "SD card unmounted"
Please can you help me? or gave me instructions to install android with XDA developers files...
Thanks
Click to expand...
Click to collapse
Maybe a suggestion, try a other Android build.
HI
kurt-willems said:
Maybe a suggestion, try a other Android build.
Click to expand...
Click to collapse
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms
flopesneves said:
The problem is... I don't know what is another android build... but cam you help me to install another android build in my HD2... I'm sorry but i don't speak very well english so it's a little dificult to understand techinal terms
Click to expand...
Click to collapse
the android builds on the hd2 android development subforum are all sd card builds, you can try any one of them