[q] i really need some help with my phone - myTouch 4G Q&A, Help & Troubleshooting

Ok, here is my story. I have a mytouch 4g, clearly, and i have s-off but withou root privileges. This happened because i used the gfree method to root my phone and then after a while my phone began rebooting itself, and i read online that this is an internal issue and many people have it. So i decided to unroot my phone so that i could get a replacement.
This is where the fun begins :/. I was on Miui, the latest one, and i used the automated unroot where u place the unroot folder and the P15IMG.zip on your phone and go to terminal to do some commands. When terminal finished what it did, it said press volume up in boot loader to finish and i did but i was too stupid to check that S was still OFF and now im on 2.2.1 without root but with S-off...
PLEASE can someone help me with this???? I am not new to this kind of stuff so i can follow somewhat complicated procedures, as long as i can get my phone to be STOCK. Thanks in advance!

perhaps try flashing one of the newer updated RUU's and then downgrade back to froyo? just throwin it out there

aznprodgy said:
perhaps try flashing one of the newer updated RUU's and then downgrade back to froyo? just throwin it out there
Click to expand...
Click to collapse
Well i already have Froyo and i just used visionary to get permaroot back.. phewww now i feel a little bit better, but i still have to get the S-on and i am trying to revert to stock, but when i enter the command "chmod 777 gfree" it says "Unable to chmod 777 gfree: No such file or directory"

Just return it and you should be good. I also did the same mistake and ignored the errors in terminal (dont remember exactly but i think the script assumed gfree is in /data/local while it was not or rwx perms on file were not setup right) and flashed pd15img.zip then I thought its not worth rerooting and unrooting and just returned it that way. That was 2 months ago and I haven't heard anything from tmo.

BAMF357 said:
i did but i was too stupid to check that S was still OFF and now im on 2.2.1 without root but with S-off...
PLEASE can someone help me with this???? I am not new to this kind of stuff so i can follow somewhat complicated procedures, as long as i can get my phone to be STOCK. Thanks in advance!
Click to expand...
Click to collapse
Code:
Procedure to revert
1. Rename the part7backup file that you already have to something just so you know that it is the original backup.
2. Open up terminal emulator or adb shell and type "su" + enter to get root privileges.
3. Type "cd /data/local" and hit enter.
4. Now type "./gfree -f" + enter to run gfree again. It will disable wp on the emmc and remove the brq filter in the kernel. (as well as make another backup, which you can delete if you wish)
5. Now run the "dd if=/where/your/part7backup-numbers.bin of=/dev/block/mmcblk0p7" and it should show the output:
xxxx bytes in
xxxxbytes out
xxxxxxxxxx copied in blah blah blah
6. Run "sync" and then reboot. (I didn't do this and it worked fine but it won't hurt either. )
If you have the engineering hboot 0.85.2007 installed you will still be showing s=off when you do the above revert steps. Follow these steps to reflash the stock hboot and turn s=on:
Download this file and unzip it to /sdcard on your device.
unroot.rar
http://www.mediafire.com/?12oi5elu7v2y8og
md5sum: aad4e64126cf8d92d7e8b5abb48fdadd
Terminal Emulator Method
1. Open up terminal editor on your device.(I prefer this method b/c you can see the output.)
a. Type "su" + enter to gain root privileges.
b. Type "cd /sdcard/unroot" + enter.
c. Type "sh unroot.sh" + enter.
d. Follow the onscreen prompts.
File Explorer Method
2. Open root explorer, sufbs, or some other file browser with root access.
a. Navigate to /sdcard/unroot.
b. Click on unroot.sh and allow it to run. Some file browsers ask permission before they execute scripts.
c. Wait 18 to 20 seconds and reboot your phone into the bootloader to check if S=on.
You now have S=ON again
Did you save the part7backup file that was created during the ./gfree root? did you replace it and follow the ./gfree unroot directions?

neidlinger said:
Did you save the part7backup file that was created during the ./gfree root? did you replace it and follow the ./gfree unroot directions?
Click to expand...
Click to collapse
i still have the part7backup and yes i put it on the SDcard and i did follow the instructions. At first i was getting some errors that gfree couldnt find something, then i check the forums again and saw that you cant unroot while in Virtous Unity so i went back to Miui and everything seemed to work fine until it still said s-off

chem.manish said:
Just return it and you should be good. I also did the same mistake and ignored the errors in terminal (dont remember exactly but i think the script assumed gfree is in /data/local while it was not or rwx perms on file were not setup right) and flashed pd15img.zip then I thought its not worth rerooting and unrooting and just returned it that way. That was 2 months ago and I haven't heard anything from tmo.
Click to expand...
Click to collapse
so even though i have s-off i should still try and return it? because i want to go to the store and give it to them

BAMF357 said:
so even though i have s-off i should still try and return it? because i want to go to the store and give it to them
Click to expand...
Click to collapse
That's what I did and know more people have done that before. But everyone i know returned by mail. If you are returning to store, I wont take a chance and would just follow what neidlinger said above.

chem.manish said:
That's what I did and know more people have done that before. But everyone i know returned by mail. If you are returning to store, I wont take a chance and would just follow what neidlinger said above.
Click to expand...
Click to collapse
well, i could send it back by mail, what did you do to get them to send you a new one? and what is the risk by sending it back with s-off? meaning, what will happen if they find out?

BAMF357 said:
well, i could send it back by mail, what did you do to get them to send you a new one? and what is the risk by sending it back with s-off? meaning, what will happen if they find out?
Click to expand...
Click to collapse
just play dumb with them. and i doubt they would care for s-off. my old phone got shipped back rooted and s-off, even had a custom splash screen that said "rooted HTC glacier" and they still accepted it

neidlinger said:
Did you save the part7backup file that was created during the ./gfree root? did you replace it and follow the ./gfree unroot directions?
Click to expand...
Click to collapse
Hey i have a question, i got my root privileges back, but when i went to do the unroot procedure again and when i entered "chmod 777 gfree" it said "no such file or directory".... do i have to do gfree again?

saranhai said:
just play dumb with them. and i doubt they would care for s-off. my old phone got shipped back rooted and s-off, even had a custom splash screen that said "rooted HTC glacier" and they still accepted it
Click to expand...
Click to collapse
what did you say your reason for a replacement was? for me, my phone rebooted itself when it was on custom roms, im going to see if anything happens on this stock mytouch ui.

neidlinger said:
Code:
Procedure to revert
1. Rename the part7backup file that you already have to something just so you know that it is the original backup.
2. Open up terminal emulator or adb shell and type "su" + enter to get root privileges.
3. Type "cd /data/local" and hit enter.
4. Now type "./gfree -f" + enter to run gfree again. It will disable wp on the emmc and remove the brq filter in the kernel. (as well as make another backup, which you can delete if you wish)
5. Now run the "dd if=/where/your/part7backup-numbers.bin of=/dev/block/mmcblk0p7" and it should show the output:
xxxx bytes in
xxxxbytes out
xxxxxxxxxx copied in blah blah blah
6. Run "sync" and then reboot. (I didn't do this and it worked fine but it won't hurt either. )
If you have the engineering hboot 0.85.2007 installed you will still be showing s=off when you do the above revert steps. Follow these steps to reflash the stock hboot and turn s=on:
Download this file and unzip it to /sdcard on your device.
unroot.rar
http://www.mediafire.com/?12oi5elu7v2y8og
md5sum: aad4e64126cf8d92d7e8b5abb48fdadd
Terminal Emulator Method
1. Open up terminal editor on your device.(I prefer this method b/c you can see the output.)
a. Type "su" + enter to gain root privileges.
b. Type "cd /sdcard/unroot" + enter.
c. Type "sh unroot.sh" + enter.
d. Follow the onscreen prompts.
File Explorer Method
2. Open root explorer, sufbs, or some other file browser with root access.
a. Navigate to /sdcard/unroot.
b. Click on unroot.sh and allow it to run. Some file browsers ask permission before they execute scripts.
c. Wait 18 to 20 seconds and reboot your phone into the bootloader to check if S=on.
You now have S=ON again
Did you save the part7backup file that was created during the ./gfree root? did you replace it and follow the ./gfree unroot directions?
Click to expand...
Click to collapse
You should do gfre again, cause when you back to stock, there no more files.
when you get to this command: "dd if=/where/your/part7backup-numbers.bin of=/dev/block/mmcblk0p7" , try to remember where/your = "sdcard" then you should be S= ON.

Related

Root - MT4G

Is there any way to root the MT4G without using a computer?
Sent from my HTC Glacier using XDA App
Yes. I was able to using visionary r14 & terminal emulator.
Find Grankins thread on rooting for step by step.
Sent from my HTC Glacier using XDA App
pvchip3 said:
Is there any way to root the MT4G without using a computer?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Fast easy and fairly safe way, Visionary Plus r14. One click root for temp and perma-root. Usually I do not recommend the 'easy way' method because I think everyone should learn how to actually root the 'hard way' just in case.. but I have to admit Visionary Plus works perfectly on the MT4G and is fast and simple as well as fairly safe. I suggest you use the temp root option first, this way if there is any issues with your device a simple reboot will fix it.
Thanks guys I now have S=OFF and this a new replacement from TMO
Sent from my HTC Glacier using XDA App
What all did you do?
PostaHTC said:
What all did you do?
Click to expand...
Click to collapse
i cannot speak of the person @ hand
The three needed items
you download VISIONary.apk
download the Root.sh file .zip and sore the folder with the script file inside the folder on the root of the SD card
download Terminal Emulator from the Android Market
How to do it
Run VISIONary and temp root w/ visionary.sh and set system to r/w after root checked
go into the Term Emul and type "SU". The $ sign should change to a #
if it does
cd /sdcard/root
sh root.sh
Click to expand...
Click to collapse
reboot into bootloader and make sure s=off.
Ok do I every hit Perm-Root?
PostaHTC said:
Ok do I every hit Perm-Root?
Click to expand...
Click to collapse
i never did. Once you turn s=off it will not check for that. after you reboot you will need to hit temp root one more time.
I'm trying it as we speak....
I temp-root?
Then I run the commands?
Then I temp-root one last time
Then Turn Off and S should be off....RIGHT?
I did a recent root though perm one. It was through a youtube video and a guide from this forum! look for perm root and s=off thread. its posted by the person who did ultimate true root and s=off.
and use visionary r11, if you dont like the manual way. thats really quick and good as well. but i dont take any responsibility though for any bricking to your phone from this suggestion xD.
PostaHTC said:
I'm trying it as we speak....
I temp-root?
Then I run the commands?
Then I temp-root one last time
Then Turn Off and S should be off....RIGHT?
Click to expand...
Click to collapse
I need to know what you have done so far
steps are:
Download files, temp root, run sh root.sh, reboot, no need to perm root from visonary
edit:
Go here:
http://forum.xda-developers.com/showthread.php?t=858996
And get the eng boot (optional steps at thhe end of the guide), its a must if you wanna start playin around with ur phone
Sent from my rooted glacier running CM7 and grankin's oc kernel
I'm doing the first steps to get S-Off but it's still S-On
I'm uploading a video to show you wat I'm doing
PostaHTC said:
I'm uploading a video to show you wat I'm doing
Click to expand...
Click to collapse
So, still no progress?
I need details though, like, what files have you downloaded, what steps, and everything.
Details bro, details.
http://www.youtube.com/watch?v=M6DrLUau8mE
PostaHTC said:
http://www.youtube.com/watch?v=M6DrLUau8mE
Click to expand...
Click to collapse
k, I saw the vid, the problem is you are still running bootloader version 0.86 and we want to be on eng bootloader, 0.85.
Ok, try this:
First off: we need the SDK, get it from google here: http://developer.android.com/sdk/index.html
Download the version that works for you, once it downloads (it is a .zip), extract it on your C:/ directory and for working purposes we will rename it to: "androidsdk". you have to launch the SDK manager, let it update and then read what follows:
Alternative Root Process
First, uninstall visionary and superuser and restart your device to wipe out temp root.
Second, download MT4G Modperm.zip and unzip its contents to your sdk platform - tools directory. (will be at C:/androidsdk/platform-tools
MT4G Modperm.zip: http://www.mediafire.com/?eaw0q0zjc7rrrwh
MD5Sum: 3ea4a7a6ddee711d12f7350ce60fae33
Then:
Windows Users:
1a. Using Explorer navigate to the root of your sdk. Hold shift and right mouse click on the platform-tools folder. Select "Open command window here". Or, open a command prompt, type:
cd /androidsdk/
cd platform-tools/
2a. Type "adbbat" + enter. Wait till the batch file finishes. (this will only work if the file we downloaded (MT4G mod perm) is extracted at C:/androidsdk/platform-tools (make sure that you do not create an extra folder within the platform-tools directory)
2. Disconnect your phone from the PC.
3. Open terminal emulator on the phone and type "/data/local/rage" + enter. Wait for "Forked XXXXXXXX children" to appear and then close the terminal.
4. Start terminal back up. It should force close.
5. Start terminal back up, again. This time it should stay open and you should have a "#" prompt instead of a "$" prompt. Then type "/data/local/temp.sh"
6. When the script finishes run /data/local/rage again and sit tight. The phone should start acting weird and do a soft reboot. Then right after everything loads it should do a hard reboot. (the phone might not reboot twice, if it does not, then you can reboot manually into bootloader and S=Off and Hboot 0.85 should be there)
7. Enjoy root!
PostaHTC said:
http://www.youtube.com/watch?v=M6DrLUau8mE
Click to expand...
Click to collapse
you didn't read what i said.
Run Visionary.sh after root should be checked
as well as
set system r/w after root.
Both of those HAVE to be checked.
As far as why you still have s=on, i have no clue.
I followed the method posted @ the unlockr (the first time i rooted my phone) link to the unlcokr. The second time i rooted my phone i followed the Wiki posted via Cyanogen Link to their Wiki page, and both of them worked perfectly.
If you want me to make a YouTube video for you showing you how to get s=off i will be more than glad to.
everest.deth said:
k, I saw the vid, the problem is you are still running bootloader version 0.86 and we want to be on eng bootloader, 0.85.
Click to expand...
Click to collapse
the first time i rooted my phone i didn't flash the Engineering Bootloader. The only current reason you need that is to flash slash images.
neidlinger said:
i cannot speak of the person @ hand
The three needed items
you download VISIONary.apk
download the Root.sh file .zip and sore the folder with the script file inside the folder on the root of the SD card
download Terminal Emulator from the Android Market
How to do it
Run VISIONary and temp root w/ visionary.sh and set system to r/w after root checked
go into the Term Emul and type "SU". The $ sign should change to a #
if it does
reboot into bootloader and make sure s=off.
Click to expand...
Click to collapse
that didnt work for me. infact, anything that involves visionary doesnt work for me
sheek360 said:
that didnt work for me. infact, anything that involves visionary doesnt work for me
Click to expand...
Click to collapse
You could try Cyanogen's method.

[Q] problems rooting new mt4g

hello! i am hoping someone can figure out what i am doing wrong. I am completely new to rooting phones.read lots about it but this is my first attempt.i have had help from a friend that has rooted several phones (including his mt4g) Now i just got this phone yesterday so its new with only the required apps for rooting on it.
both my friend and i have tried several times this method:
6. Run visionary to gain temp root.
7. Open terminal emulator on your device, type “su”, and hit enter to gain root privileges.
8. Type “cd /data/local” and hit enter.
9. Now type “chmod 777 gfree” and hit enter to make the program executable.
10. Type “./gfree” and hit enter.
11. Wait for the program to finish and then reboot into HBoot to see if S=Off. Also, check your bootloader version. If it says s=off and has bootloader version 0.86.0000 it worked
then hit a brick wall with this step '10. Type “./gfree” and hit enter.' we get a permission denied error.
i have also tried this method several times:
5. open android terminal emulator
type in "su" then click entet (without " mark)
it will probably say permission is denied
type in "su" again, then click enter
supper user will pop up asking for permission click "allow"
type in "cd /sdcard/root" then click enter
type in "sh root.sh" then click enter
give a min or two when it says turn off and go into recovery to check if s is on or off, exit out of emulator
6. turn off the phone, then reboot into hboot by holding volume down and power button
7. it should say S=OFF
but after the reboot in step 6 it is still s-on
hboot-0.86.0000
hoping someone can help
oh and i followed the steps to a T, thanks for any info
So you are able to temproot? Does typing "su" in terminal emulator give you superuser privileges (if the prompt symbol changes to a # instead of a $, it worked)?
If so, make sure you've downloaded the gfree files and copied them to the proper place. You want the files themselves to be in /data/local on the phone. You do NOT want a folder named "gfree" containing these files. The commands should work exactly as written.
I'm the one that was helping the op. Does the gfree folder need to be renamed or does the files need to be moved out of the folder and placed in /data/local directly? I rooted with the above method in like 5 minutes but when I tried with the op we got ./gfree permission denied as stated above. Thanks for your help it's much appreciated and we'll post back with results.
that worked perfectly!! had to take the files out of the gfree and put them directly in local and rename the gfree folder something else. Thanks!
okay we got it figured out and s-off. For those wondering if you manually add the files through root explorer copy the files in the gfree folder and drag them to /data/local and paste. Do not put the gfree folder in /data/local. Thanks again jdkoren for the help!
would it work if you just put the files on your sd card instead? Also its a brand new mytouch 4g correct? Meaning bought in 2011? I just bought one and the unlockr method didnt work. Im going to try the method you guys did next and i saw a video in which the guy did the same thing (gfree version) but just changed data local to sdcard. Im just wondering because im about to root soon. Thanks.
Yes it was bought in 2011. Use the guide found here briefmobile just make sure to use root explorer and copy all the files inside the gfree folder and paste them to /data/local.

Q unrooting device with stock rom

Hello everyone. I rooted my mt4g a while ago and am on a stock rom. I don't remember which method is did to root it. I know I used visionary at some point and hit root now there. But I was wondering if someone can help me as far as which steps or instructions in supposed to follow. Thanks in advance
Sent from my HTC Glacier using XDA App
markjnj said:
Hello everyone. I rooted my mt4g a while ago and am on a stock rom. I don't remember which method is did to root it. I know I used visionary at some point and hit root now there. But I was wondering if someone can help me as far as which steps or instructions in supposed to follow. Thanks in advance
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
first things first did you ever turn "s" back on?
-turn the phone off, turn it on and hold the power button and the down volume rocker.
top line should tell you that.
If you are still s=off then all you need to do is download VISIONary.apk r14 and tap temp root.
neidlinger said:
first things first did you ever turn "s" back on?
-turn the phone off, turn it on and hold the power button and the down volume rocker.
top line should tell you that.
If you are still s=off then all you need to do is download VISIONary.apk r14 and tap temp root.
Click to expand...
Click to collapse
Thanks! that was simple enough....Thanks again!
markjnj said:
Thanks! that was simple enough....Thanks again!
Click to expand...
Click to collapse
no problem.
hitting "temp root" in vis11 unroots?
acsi007 said:
hitting "temp root" in vis11 unroots?
Click to expand...
Click to collapse
i've never used r11, so i cannot answer that first hand. You should have a "unroot" button that will remove SU access.
@neidlinger i am having an extraordinary difficult time unrooting and changing S= OFF, to S= ON.
i feel like i am stuck somewhere in the middle. i am back to a stock rom using the file PD15img.zip and in terminal at the $ prompt when i type "su" it replies "permission denied". now here is the weird part. when i boot into recovery ( volume down, power button) and hit recovery it moves into the splash screen and then on to the dreaded read triangle..........once i hit vol up and power it boots into recov again.
any insight?
thanks
s
snoobar said:
@neidlinger i am having an extraordinary difficult time unrooting and changing S= OFF, to S= ON.
i feel like i am stuck somewhere in the middle. i am back to a stock rom using the file PD15img.zip and in terminal at the $ prompt when i type "su" it replies "permission denied". now here is the weird part. when i boot into recovery ( volume down, power button) and hit recovery it moves into the splash screen and then on to the dreaded read triangle..........once i hit vol up and power it boots into recov again.
any insight?
thanks
s
Click to expand...
Click to collapse
Well the "permission denied" just means you do not have SU access.
When you rooted your phone did you use the ./gfree method?
yep! and i feel i havent successfully removed ./gfree.
snoobar said:
yep! and i feel i havent successfully removed ./gfree.
Click to expand...
Click to collapse
That's where the problem lays. http://forum.xda-developers.com/showthread.php?t=834225
neidlinger said:
Well the "permission denied" just means you do not have SU access.
When you rooted your phone did you use the ./gfree method?
Click to expand...
Click to collapse
I have tried all the unrooting methods for those who used the "./gfree" method, but i am always running into issues when i try to initiate the commands.
also, where do the gfree files and folders reside? in a folder on the sdcard? or open and available on the sdcard?
snoobar said:
I have tried all the unrooting methods for those who used the "./gfree" method, but i am always running into issues when i try to initiate the commands.
Click to expand...
Click to collapse
did you follow the steps to reverse the ./gfree?
http://forum.xda-developers.com/showthread.php?t=858996
1. Rename the part7backup file that you already have to something just so you know that it is the original backup.
2. Open up terminal emulator or adb shell and type "su" + enter to get root privileges.
3. Type "cd /data/local" and hit enter.
4. Now type "./gfree -f" + enter to run gfree again. It will disable wp on the emmc and remove the brq filter in the kernel. (as well as make another backup, which you can delete if you wish)
5. Now run the "dd if=/where/your/part7backup-numbers.bin of=/dev/block/mmcblk0p7" and it should show the output:
xxxx bytes in
xxxxbytes out
xxxxxxxxxx copied in blah blah blah
6. Run "sync" and then reboot. (I didn't do this and it worked fine but it won't hurt either. )
If you have the engineering hboot 0.85.2007 installed you will still be showing s=off when you do the above revert steps. Follow these steps to reflash the stock hboot and turn s=on:
Download this file and unzip it to /sdcard on your device.
unroot.rar
http://www.mediafire.com/?12oi5elu7v2y8og
md5sum: aad4e64126cf8d92d7e8b5abb48fdadd
Terminal Emulator Method
1. Open up terminal editor on your device.(I prefer this method b/c you can see the output.)
a. Type "su" + enter to gain root privileges.
b. Type "cd /sdcard/unroot" + enter.
c. Type "sh unroot.sh" + enter.
d. Follow the onscreen prompts.
File Explorer Method
2. Open root explorer, sufbs, or some other file browser with root access.
a. Navigate to /sdcard/unroot.
b. Click on unroot.sh and allow it to run. Some file browsers ask permission before they execute scripts.
c. Wait 18 to 20 seconds and reboot your phone into the bootloader to check if S=on.
You now have S=ON again.
Click to expand...
Click to collapse
snoobar said:
also, where do the gfree files and folders reside? in a folder on the sdcard? or open and available on the sdcard?
Click to expand...
Click to collapse
they are in the /data/local folder.
neidlinger said:
did you follow the steps to reverse the ./gfree?
Click to expand...
Click to collapse
yes and i encounter errors....such as gfree not found. but my gfree and its files for some reason are directly on the root of the sdcard and not in any folders.
you dont happen to have any time on a gchat or anything of the sorts do you? i am in serious need of a walkthrough.....if you are willing and have the time. i have tried almost all these methods for the last couple days and no dice.

[Q] Questions galore on rooting MT4G!

Hi everyone,
I have a MT4G, 2.2.1, kernel 2.6.32.21-g899d047. I am using Windows 7 Ultimate 32-bit.
I want to root the phone but I am meeting a lot of permission issues.
I have been following this guide: http://wiki.cyanogenmod.com/index.php?title=TMobile_myTouch_4G:_Full_Update_Guide
At the very beginning, I had problems with su and Superuser.apk.
I have used 'adb devices' to check that my phone is indeed detected.
I put su and Superuser.apk into the same directory as
When I use 'adb push su /sdcard/su', I receive an error saying 'Failed to copy 'su' to '/sdcard/su': Permission denied. Same error for Superuser.apk.
I looked further down the guide and noticed that I would not actually be using the su and Superuser.apk at all and simply copied it over to the SD card itself when I plug the phone into my computer.
I then go into terminal emulator on the phone and I run rage and received the 'Forked #### childs' message, after which I reset term.
I assume I have root shell at this point because I am no longer on $, but instead on #.
At this point, I am able to adb push gfree (the one file gfree) into /data/local. I am able chmod 777 from adb.
When I go into terminal emulator again, I run '/data/local/gfree -f' but it gives me the error message of '/data/local/gfree: permission denied'
What am I doing wrong? I used 'ls -l' inside the directory of /data/local and I have complete rights for gfree (drwxrwxrwx).
----
I have also attempted to use VISIONary+ (R14) but all it does is flash a couple of times then go back to the app page where you choose to temproot. I check my app drawer and Superuser is indeed there, but if I tried to go into terminal, I am met with $. I tried entering 'su' but it would say unknown user root.
----
PLEASE HELP! THANKS!
Use this method. It's pretty much fool proof.
http://forum.xda-developers.com/showthread.php?t=858996
Are you temp rooting with visionary before entering the commands in terminal?
lowandbehold said:
Are you temp rooting with visionary before entering the commands in terminal?
Click to expand...
Click to collapse
i can haz 10 char
neidlinger said:
Use this method. It's pretty much fool proof.
http://forum.xda-developers.com/showthread.php?t=858996
Click to expand...
Click to collapse
lowandbehold said:
Are you temp rooting with visionary before entering the commands in terminal?
Click to expand...
Click to collapse
As mentioned in OP, I am using the rage file to give me temporary root. I am currently not using VISIONary because (also included in OP) I am not getting root shell at all with VISIONary. I click temproot in VISIONary and the superuser app shows up but I am unable to su in Terminal.
Try to find visionary 11, people have alot of problems with 14.
neidlinger said:
Use this method. It's pretty much fool proof.
http://forum.xda-developers.com/showthread.php?t=858996
Click to expand...
Click to collapse
Having trouble at step 1..
'adb push gfree /data/local'
Met with the error 'Failed to copy 'gfree' to '/data/local/gfree': Is a directory'
I extracted the files into platform-tools.
Didn't you already put gfree on your phone from the first attempt?
lowandbehold said:
Didn't you already put gfree on your phone from the first attempt?
Click to expand...
Click to collapse
Yes but I was attempting to follow a whole new guide. Regardless, I have shell root but I am still unable to run gfree. It still shows permission denied (again, using ls -l, I can see that gfree is drwxrwxrwx).
Use visionary 11. I have rooted 4 MT4G's with that guide and visionary 11...It works.
before you attempt a new rooting method please pull the battery and let the phone sit for a few moments. Since your s-on it will delete any unwanted files that you may of tried to push to the phone.
and type in
Code:
adb kill-server
adb start-server
That will refresh the adb server on your computer.
you'll also need to change the directory to the folder where you stored the gfree files.
double post...sorry
lowandbehold said:
Use visionary 11. I have rooted 4 MT4G's with that guide and visionary 11...It works.
Click to expand...
Click to collapse
Yeah, I'm using visionary 11. Still no good.
Are you checking the boxes in visionary and clicking temproot? I don't know what the issue could be...you must be missing something.
lowandbehold said:
Are you checking the boxes in visionary and clicking temproot? I don't know what the issue could be...you must be missing something.
Click to expand...
Click to collapse
I have 'Set system r/w after root' checked. I don't need to check 'Run visionary.sh' and 'Root on boot', do I?
itzbilly said:
I have 'Set system r/w after root' checked. I don't need to check 'Run visionary.sh' and 'Root on boot', do I?
Click to expand...
Click to collapse
RUN VISIONARY.SH : Yes
root on boot : no
neidlinger said:
RUN VISIONARY.SH : Yes
root on boot : no
Click to expand...
Click to collapse
Tried with those settings and now I've lost root shell. I'm on $ and entering su gives me unknown user root.
VISIONary says device is rooted when I try to run it again.
I would check the root on boot, reboot, uncheck it, go into terminal and put in the su command and see what happens...your phone will be really laggy when you boot it up, so give it a minute, it is normal.
lowandbehold said:
I would check the root on boot, reboot, uncheck it, go into terminal and put in the su command and see what happens...your phone will be really laggy when you boot it up, so give it a minute, it is normal.
Click to expand...
Click to collapse
Do i uncheck and then reboot or just uncheck and go straight into terminal?
check everything including the root on boot. Reboot the phone. Then you can go straight into terminal or uncheck it and go into terminal..doesn't matter. Just make sure before you reboot a second time that root on boot is not checked.

Revert to S=on problem

Hi I follow the un rooting guide ,I'm back to stock but hboot keeps showing s=off. i want s=on
this i what i did
grankin01 said:
If you have the engineering hboot 0.85.2007 installed you will still be showing s=off when you do the above revert steps. Follow these steps to reflash the stock hboot and turn s=on:
Download this file and unzip it to /sdcard on your device.
unroot.rar
http://www.mediafire.com/?12oi5elu7v2y8og
md5sum: aad4e64126cf8d92d7e8b5abb48fdadd
Terminal Emulator Method
1. Open up terminal editor on your device.(I prefer this method b/c you can see the output.)
a. Type "su" + enter to gain root privileges.
b. Type "cd /sdcard/unroot" + enter.
c. Type "sh unroot.sh" + enter.
d. Follow the onscreen prompts.
File Explorer Method
2. Open root explorer, sufbs, or some other file browser with root access.
a. Navigate to /sdcard/unroot.
b. Click on unroot.sh and allow it to run. Some file browsers ask permission before they execute scripts.
c. Wait 18 to 20 seconds and reboot your phone into the bootloader to check if S=on.
You now have S=ON again.
Here is a pic of the stock HBoot 0.86.0000 with S=Off to prove it.
Click to expand...
Click to collapse
jeff7790 said:
Hi I follow the un rooting guide ,I'm back to stock but hboot keeps showing s=off.
Click to expand...
Click to collapse
1) did you use the ./gfree method?
2) did you follow the extra steps to allow for this?
Gfree writes a backup of the file that it patches named Part7backup-numbers.bin on your sdcard. I suggest putting this file in a safe place as it is the only way to revert if you need to.
1. Rename the part7backup file that you already have to something just so you know that it is the original backup.
2. Open up terminal emulator or adb shell and type "su" + enter to get root privileges.
3. Type "cd /data/local" and hit enter.
4. Now type "./gfree -f" + enter to run gfree again. It will disable wp on the emmc and remove the brq filter in the kernel. (as well as make another backup, which you can delete if you wish)
5. Now run the "dd if=/where/your/part7backup-numbers.bin of=/dev/block/mmcblk0p7" and it should show the output:
xxxx bytes in
xxxxbytes out
xxxxxxxxxx copied in blah blah blah
6. Run "sync" and then reboot. (I didn't do this and it worked fine but it won't hurt either. )
If you have the engineering hboot 0.85.2007 installed you will still be showing s=off when you do the above revert steps. Follow these steps to reflash the stock hboot and turn s=on:
Download this file and unzip it to /sdcard on your device.
Click to expand...
Click to collapse
Ok fixed it i followed the tutorial again but what i was missing was chmod 777 on gfree
I have restored to stock, including S=On by restoring with the stock PD15IMG.

Categories

Resources