Evo screen is brighter than most phones with AUTO light sensor on = more battery drain.
Just found app "screen adjuster". It works along with LIGHT SENSOR. I'm setting it to 50%. So it's half the brightness and you keep the auto sensor on.
https://market.android.com/details?...t=W251bGwsMSwxLDEsImNvbS5uZXRtYW5zbGFiLnNhIl0.
Going to try it out. I've thought the same thing for a long time. Thanks for the suggestion!
Tried this app out not sure how much battery it would save replacing the brightness with an app constantly running in the background considering it has to run 24/7 to maintain the brightness level I doubt it would save any battery if not kill it faster than the brightness level since 1. Brightness is off when screen is off but this is still running while screen is off and 2. The brightness only goes all the way up when you are in bright light so you can see the screen setting the app at 50% is really pointless since on auto the screen is at 50 - 70% when you are indoors
We are legion, for we are many
@Evil
I think your points are valid, but just wanna throw out that I think the OP is saying the baseline screen brightness is too high. At all levels.
sent from AOKP heaven
scottspa74 said:
@Evil
I think your points are valid, but just wanna throw out that I think the OP is saying the baseline screen brightness is too high. At all levels.
sent from AOKP heaven
Click to expand...
Click to collapse
It only sets Max at whatever level u set it to then autos from there, and it runs ~5mb ram constantly so it really doesn't do a whole lot it just sets, as an example, u set it to 80% with the app then on auto ur brightness goes from min to 80% and back to min or in between the two it doesn't dim all levels, and runs constantly so I would say its more trouble than its worth it would be nice if u could just set a lower Max and not need the app running 24/7
We are legion, for we are many
-EViL-KoNCEPTz- said:
Tried this app out not sure how much battery it would save replacing the brightness with an app constantly running in the background considering it has to run 24/7 to maintain the brightness level I doubt it would save any battery if not kill it faster than the brightness level since 1. Brightness is off when screen is off but this is still running while screen is off and 2. The brightness only goes all the way up when you are in bright light so you can see the screen setting the app at 50% is really pointless since on auto the screen is at 50 - 70% when you are indoors
We are legion, for we are many
Click to expand...
Click to collapse
There MANY processes constantly running in the background, the OS is smart enough to pause most of these processes when in sleep mode (display off). For example, if you use the light sensor and your phone is off the sensor is not being polled anymore.
Setting 50% means if the brightness is normally at 100 it would be 50, if it was normally 50-70 indoors it would be really be 25-35 with the app.
Or a lower baseline, which I believe is the OPs point. But yes, running an extra ap is an inefficient way to do that.
sent from AOKP heaven
mxl180 said:
There MANY processes constantly running in the background, the OS is smart enough to pause most of these processes when in sleep mode (display off). For example, if you use the light sensor and your phone is off the sensor is not being polled anymore.
Setting 50% means if the brightness is normally at 100 it would be 50, if it was normally 50-70 indoors it would be really be 25-35 with the app.
Click to expand...
Click to collapse
The app doesn't pause it runs as a notification task killers don't touch it, and it doesn't work the way u think in lower light it will stay at 50% it just prevents the screen from going past where u set it it doesn't change the values of anything in the sensor just stops the screen from going above x% so if ur in a bright room where ur screen would be at 50% and u have it set to 50% it would still be at 50% not 25%, what I'm trying to say is the app doesn't work the way its advertised
We are legion, for we are many
This was on my list of things to be fixed nearly from the start but nobody, especially devs, seemed to care.
http://forum.xda-developers.com/showthread.php?t=716547
Display brightness
Based on experience what are the optimal display settings for the best battery life?
lol 0% is the optimum setting. really, the more its off, the more you save. the less its off, the more you save. its really up to your eyes and what you can tolerate. i just have a widget, at night i flip it to 0, and during the day if i'm out doors and in doors i leave it on auto, and if i'm indoors like at work, i leave it at 25%. what sucks is i don't smoke in my apt, so when i wake up i go outside for a cig and my screen's at 0, and i'm trying to read it in the sunlight to turn it back on lol... buuuuuut, i'm sure my way saves more battery than using an app that is constantly running
Has anyone else noticed visible lag (~2-4s) say:
- after you unlock the screen (assuming the phone was not used for 5-10 minutes)
- and the screen comes up with low brightness
- till the screen returns to brightness (say when it is set to auto).
The lag is between the 2nd and 3rd step
Or another lag of (~1-1.5s), when you touch the screen, when it is been:
- a dim screen (when one has stopped using it for sometime, but not off yet and the brightness goes down),
and then you touch... till it attains:
- the normal brightness that the screen is supposed to be (say when set of auto).
I have noticed both behaviors like 8-10 times during last one day.
The native auto brightness algorithm and control really sucks. I use Velis auto brightness app from the market. Way much better.
[email protected] from Bad Ass Note III-SM-N9500
I came from a Nexus 5 and had to always leave my screen brightness on about 1/3 in order to preserve battery. After playing with my 6P for over a month, I feel like the battery can handle a brighter setting (with my usage). But, I have concerns about burn-in if I put the setting too high since this is an AMOLED panel.
What brightness settings are you using and have you had any issues with burn-in?
I will get this started. I first started by activating the Adaptive Brightness under the display settings.
It makes the screen dimmer - to my eyes even though it sets the overall brightness to exactly half way.
I thought my whites looked somewhat grey at that setting so I turned it off and put my screen back down to 1/3 (LOL) and I am pleased with the results - especially at night as the whites look whiter.
anything past half at night burns in my retinas much less the screen.
I have not noticed any less Screen on time. I still get about 4.5 - 5 hours until it hits 15%. This is with location turned on and email push. I don't use twitter, facebook or any of those social apps the young people are using these days.
Is there an easy way to dim the screen to the point where you can't see the picture? I stream the phone in my car, which means it will get hot with charging, screen on, and high usage simultaneously. Since it is an AMOLED screen, it would not allow for screen off like other devices. Seems like without this, burn in would be a big problem for me.
I would think that you could just do the 2 finger swipe to bring it to the default menu. Then set the slider down as low as possible until you can barely see anything. I took a 5 hour drive today with my Nexus 6P with the girlfriend and had it plugged in for at least 2 hours at a time. My phone did not get really warm while either plugged or when running on battery.
Also I have enabled the System UI Tuner and now my phone screen only stays on when plugged into the power source if I select "stay on when plugged in"
mhughes1966 said:
I would think that you could just do the 2 finger swipe to bring it to the default menu. Then set the slider down as low as possible until you can barely see anything. I took a 5 hour drive today with my Nexus 6P with the girlfriend and had it plugged in for at least 2 hours at a time. My phone did not get really warm while either plugged or when running on battery.
Also I have enabled the System UI Tuner and now my phone screen only stays on when plugged into the power source if I select "stay on when plugged in"
Click to expand...
Click to collapse
No burn in issues? I would think there is a way to reduce brightness beyond stock but I don't know enough to do that at this point. Perhaps through Xposed it something.
Travillion said:
I came from a Nexus 5 and had to always leave my screen brightness on about 1/3 in order to preserve battery. After playing with my 6P for over a month, I feel like the battery can handle a brighter setting (with my usage). But, I have concerns about burn-in if I put the setting too high since this is an AMOLED panel.
What brightness settings are you using and have you had any issues with burn-in?
Click to expand...
Click to collapse
I had a gnex that I kept on low brightness and refused to get another nexus until battery was straightened out. On my dmaxx, I kept the brightness high and no burn in on the amoled. The 6p isn't as good at battery, despite being huge, but it's good enough. I keep it on 60-100 brightness, using lux to adjust it as needed. No burn in so far
Hello.
I would like to use my s6 edge+ as a desk Alarm Clock, while charging. But when I set any screen saver (for example dash clock widget, Clock plus or pictures) and I set 30 seconds to start screen saver first display blends and then goes black. Nothing more. Any ideas what can be the problem?
I use stock 601 XEO.
i recently bought a used s7 edge. the cellphone's display is damaged buf overall it works fine. except for a few issues mainly related to light sensor according to my understanding.
1: the display flickers when auto brightness turned off or when brightness is set to anything less than maximum
workaround: i installed screen filter app to control the brightness
2: the screen goes to green screen of death when device is put to sleep
workaround : turn AOD to always on and never Turn it off
3: the display goes to green death screen during call and wont get normal unless call is ended and screen is locked and turned on..
4 : at AOD ,the screen flickers at night time or in a dark place but gets back normal in bright light..
info i need : i thought what if it was possible to change the android framework values for the light sensor so that no matter whatever the light of the surrounding may be.. the device will always think it's in bright light.
for example if the settings for current values are
high 5000 medium 2000 low 600
then i change it to
high 1000 medium 500 low 25
so that the device will always think its in full bright area..
can anyone help me in achieving this goal? thanks