Database Users

solved how to wirelessly connect to a wired network:)

ok here's the problem
you want to connect to a wired network or even simply a single pc connecting to the net on a broadband or dialup connection.
if there was a wireless router then it wouldnt be a problem. your pda would connect to the wireless network and the wireless router would give your pda an address and everything would work.
without the wireless router you don't get allocated an ip address.
well problem solved www.nat32.com has a program called nat32e which you can get a demo version of (works for an hour before needing to be restarted)
essentially this is a nat router which runs on any pc running windows
you need a wireless card in addition to its ethernet connection to the net.
I did this with 2 wireless cards so in theory it could be used to extend the effective range of an existing wireless network too
installation is simple but basically you give the wireless card i used a belkin usb 54g dongle type on channel 6 a fixed address and tell it to connect to an adhoc network called "whatever"
you add a network packet driver, nat32 holds your hand installing this,
then the pc needs a reboot.
first time you run nat32 it runs through the configuration you tell it what card connects to the internet and which card connects to your private net
(that is your adhoc wireless network) it sets things up
scan for a network on your pda tell it to look for adhoc networks connect to "whatever" and tell it when it asks, it connects to work.
you should then have wireless access to the net.
if your doing this with two wireless cards make sure you have seperate channels set up for your infrastructure network and your adhoc network.
the belkin 54g usb wireless dongle costs about 25 from staples or 30 from pc world (both are local for me)
the host pc will run fine without any problems with nat32 running or not
no proxys need configuring a registered verion of nat32 costs from
$25 but this gets you registered for just one pc and really you want it so you can roam with a usb wireless card in your pocket and your pda.
I think adhoc wireless networking works for up to 30 wireless points.
i did it with a pda, mdaIII and a laptop.
basically like ics but with less problems
I think you can do this with bluetooth as well but that really isn't fun
hope this is useful sorry its so rough but i have to get to work

Think you may be on the trail of a problem that I am stuck on at the moment . I have the XDA11i and want to connect it via blue tooth to a blue tooth modem connected in turn to to a BT wall socket ( in that way I can surf for 1p per min !!!) no matter what I seem to do whilst the PDA will recognise the Modem as a serial modem ( and form a secure link ) it wont talk to it and get it to dial up . Zoom ( Hayes ) are wondering if 02 have disabled the element in blue tooth that lets this work ? Any thoughts . with the above I dont need to lug my lap top round with me .
Regards
Astro1
London England

AT&T 8525 Internet Sharing to Wireless Router?

I am getting ready to head on vacation and I want to use my 8525 as my "Gateway" as there will be 5 of us with laptops and I want to share my 3G connection so here is what I did. I connect my 8525 to my Laptop via usb, I start internet sharing on the 8525 and in my laptop (vista) under network connections I see Local Area Connection 6, remote NDIS based Internet Sharing Device. I right click this connection and select Sharing, and enable internet connection sharing on it. Then what I did was took my router (linksys) and disabled dhcp, but enabled wireless and didnt set any wep or wpa. I connect from my laptop to a port on the router (not the internet port) and then goto another laptop to see if I have internet. I dont, I can see the ssid, I can connect but I do not have internet access. Should I use a crossover cable? What do I have to do so that all of us can have internet thru my phone? Oh, my laptop does have internet (from the usb connection on the phone). I tried to setup the router so that dhcp was enabled, but then I kept getting an ip conflict error, so we cant do that. Also I am not getting an ip on the wireless, it has an ip of like 169.254.177.12.
Any ideas?
Thanks
Jim

There a software which you can install on 8525 and turn it into a wifi internet sharing but I don't know if it capable of handing up to 5 laptops. You might be able to use this software and get a router with some custom firmware which allow bridging then set it up to have router access the internet from 8525 wifi and share it among the 5 laptops but I am not sure if you could bridging and do wifi AP on the same router if not then you'll probably need to have 2 router one to bridge from 8525 wifi and then connect cable to another router that will be an AP for the laptops.
That would be my best guess of doing this unless one of the laptop can do AP via wifi when 8525 is plugged into usb slot.
Bill

HD2 as wirelss usb device?

Hi, I got a laptop without a wireless card for internet connection. So I've been using my HD2 as a USB wireless device, which gives me internet everywhere. THat very nice, and it works extremely well, however I got a question. WHen at home and at work I would like to connect to the wireless router, and not to my mobile internet, is that possible?
Because even tho i connect without problem to my own router at home, I cant really make my HD2 use that for my computer. Is it even possible?

nope... and that is the whole purpose of a wireless card, to pick up wifi signals from a router

It is possible.
Use ICS Control:
http://forum.xda-developers.com/showthread.php?t=377047
Setup should be as follows:
public interface: BCMSDDHD1
private interface: RNDISFN1
Connect your HD2 to WiFi network, click "Start ICS" and plug the cable in to your PC. Should work If you have XP, you should kill Active Sync process first.

Thank you, however I'm not sure that I do everything correctly.
There's quite a lot of settings in that pieve of software, is all I have to edit really the public and private interface drop down boxes? Nothing else?
And when connection to wifi, shall i then just minimize ICS controls, go to phone settings and connect to wifi there?
Thank you

What you want is for your phone to connect to the internet through wireless connection, not your phone's data/internet connection?
If so, then it's definitely possible. Not only at home and work, but also at many wifi spots throughout the world. How you go about it depends on some things.
Does your home and/or work wireless router connect straight to the internet (such as a connection from the wireless router to a cable modem, etc.) ? If so, you only need to know how to connect with the wireless router and your phone should default to that connection for internet when your phone's wifi is turned on. You can always turn data connection off when you turn wifi on to make sure it goes through wifi.
If your wireless router does not connect directly to the internet but one of the computers on the router's network does, then you'll have to use Internet Connection Sharing (ICS) on that internet enabled computer as posted about above.

I want my phone connected to the wifi router, simple yes. However, then I want my phone to share the internet from the router, with a computer connected to the phone via usb cable.
So my phone will actually work as a wireless usb device, connecting to a wifi router.

WMWiFi Router provides following options on the phone:
1)3G converting to WiFi
2)3G converting to USB
3)3G converting to BlueTooth
4)WiFi converting to USB
5)USB converting to WiFi

[Q] Problem connecting to Netgear WiFi Router.

I have my Tattoo rooted with 1.6 (can't recall the ROM name) with build number 1.67.405.6. Almost everything works fine except the connection with my home WiFi network. It's a PPPoE connection through ADSL modem. Next in line is the Netgear WG602 v3 WiFi router. At the beginning I couldn't connect at all so I changed the router's ROM to DD-WRT. Now I can connect with the router but no connection to the internet whatsoever. I can ping my router through my Tattoo, I can even open the 192.168.1.1 and mess around with its software but no connection to the internet. It is only limited to my Tattoo as I can connect through my laptop, through my other mobile (HTC S710) and also I can connect my Tattoo with any other WiFi (Secured or Open) with no problems at all.
I tried with no Security, with WEP, with WPA-PSK to no avail. Any other clues?

try running htc mail while you are using your wifi throuf your tattoo it worked for me

What is supposed to happen if I do that? I'm trying it as soon as I get home btw.

Nothing happened

Hi all...sorry for my interference but this problem is similar to mine.
I'm going mad from many weeks trying connect my Huawei Ideos (U8150) to my home wlan through a netgear VG602v3 AP. No way to do this.
Wifi works from my laptop and from my girlfriend's laptop, but from ideos it doesn't.
I turned off all wireless device in my house, I tried with/without WPA, I tried open network from channel #1 to channel #13, tried changing ssid and I also tried praying .
There is a weak wifi near here: it is on channel #1 and its power is between -89 and -82db. My wifi power (data from kismet) is between -50 and -18 db and is configured on channel #11.
In any cases, even if I put my Ideos near to AP antenna the story is ever the same:
- Ideos indentify the wifi network
- Ideos acquire the IP
- I open the browser or the android market and...
- Ideos lose connection...and so on.
I downloaded from work wifi (crypted with WPA) a wifi scanner from app store: it shows me the neighbour's weak wifi and my wifi network which appear and disappear recurrently.
Please, someone helps me (without suggest to buy another AP!!), any suggestions are welcome!!

Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.

I checked every setting to no avail. I still think somehow that my problem is with my router or adsl modem which doesn't connect automatically with PPPoE and Android doesn't have any command or software to initiate a PPPoE connection.
Other than that... Can't find any solution. Until then, I use connectify on my Win7 laptop. The thing is that I have to keep my laptop switched on as long as I'm in the house.

alpick36 said:
Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.
Click to expand...
Click to collapse
thank you for suggestion. I looked in depth but I did not found the option of which you were talking about. The unique solution still remains change the AP!!!

WiFi and Netgear Router
I think I finally found the answer. It appears Netgear routers support something called WiFi Multimedia. Its a QOS methodology. I disabled WiFi MM or WIMM as its sometimes called, as well as Internet QOS and all my problems connecting to web pages, the market, etc. through WiFi disappeared.
Strange that older versions of the ROM supported WIMM (or ignored it) and newer ones don't. But that solved the problem for me with no real degradation of performance on any of my other computers.
Good luck.

[Q] Internet connection sharing

Hi,
I*m running PACrom/stock kernel and I'm trying to make the following work to no avail yet:
I want to share the Internet connection I get on my N7 WiFi wirelessly from the router to my desktop PC via WiFi, Bluetooth or USB.
Although there are lots and lots of different apps regarding tethering/connection sharing on the Playstore, none has worked for me yet.
I tried FoxFi, Wireless Tether and so on, but nothing works. Either the app complains about the N7 being in an "unknown mode" and therefore refuses to work, or I can establish a connection between the device and my PC, but it stops at some poin, not getting an IP adress or similar issues.
Searching for solutions online mostly brings up this issue in regards to an Internet connection established via mobile 3/4G data, which doesn't help me at all.
Basically, my question is whether there's a solution which lets my share my Wi-Fi Internet connection on my Nexus 7 to my desktop PC, I don't care if its via WiFi ( would be my preference, but I don't even know if its possible to create a HotSpot on the N7 my desktop can access while still being connected to the other, Internet providing WiFi connection) Bluetooth or USB, whatever works is fine by me.
Would love to get some helpful advice/successful storys from you guys

Have you tried Proxoid? It's http only, basically a port 80 proxy that passes the http traffic over the phone's data connection via USB cable... I've used it on my Galaxy S3, but haven't tried to use it through the Nexus 7's wifi...
http://code.google.com/p/proxoid/