Try this patch it works really well i tried it and im gettin gon doomkernel 6 percent for 5 hours dats excellent im really happy the link is http://forum.xda-developers.com/showthread.php?t=1382657
I've got baseband -58 on Hong Kong ROM, will this patch change anything, cause I can't find any annotation about HK's -58 baseband.
romcio47 said:
I've got baseband -58 on Hong Kong ROM, will this patch change anything, cause I can't find any annotation about HK's -58 baseband.
Click to expand...
Click to collapse
Ye the thing is get the latest flashtool and select the .368 firmware only flash the baseband so leave out the system and the kernel, then when you done that. Then get the libs flash it through recovery of doom, then youll have much better battery I done it myself works really well. Ive got the .58 firmware with the 36 baseband and the libs flashed for that.
romcio47 said:
I've got baseband -58 on Hong Kong ROM, will this patch change anything, cause I can't find any annotation about HK's -58 baseband.
Click to expand...
Click to collapse
Also the baseband you got maybe a little difference but you should get the 36 baseband much better battery and signal
I've noticed some signal loss when phone is idle and being waken up. Signal rises from total ZERO to max in 2 secs.
I'll try to flash new baseband and this fix and tell you what happened.
edit:
Curiosity killed the cat... umm, the phone I did something wrong and I had to reflash the whole ROM. I won't try to apply this fix again until official release.
Anyone got the Play specific libs for this?
Yes I posted them in another thread about this exact same thing
here: http://forum.xda-developers.com/showthread.php?t=1383069
Libs for the -36 baseband and -58 baseband attached here
Sent from my R800a using XDA App
thatsupnow said:
Yes I posted them in another thread about this exact same thing
here: http://forum.xda-developers.com/showthread.php?t=1383069
Libs for the -36 baseband and -58 baseband attached here
Sent from my R800a using XDA App
Click to expand...
Click to collapse
Ah thanks for that! I knew I had seen it somewhere, but couldn't find it again! Time to install the -36 libs.
Out of curiosity, are you running either or these?
Atarii said:
Ah thanks for that! I knew I had seen it somewhere, but couldn't find it again! Time to install the -36 libs.
Out of curiosity, are you running either or these?
Click to expand...
Click to collapse
Yea I was running the -36 baseband for a week to see what the signal and drain was like now I'm running the -58 baseband and I can say that the -36 is better than the -58 especially on the battery
Sent from my R800a using XDA App
i agree 100 percent mate i noticed a big difference in battery i can say
help
i was wondering if anyone could help me
I flashed baseband .36 to my phone and the applied iridaki baseband libs patch for arc
i lost all network
tried putting play libs from this thread into his cwn flashable patch and still no joy
now i'm stuck on baseband .36 with the wrong libs
tried full nandroid restore but to no effect
Use flashtool to flash just the baseband for whichever firmware
Like this: http://forum.xda-developers.com/showpost.php?p=20152843&postcount=20
Hi guys , i have applied this patch and i am happy , the only problem im getting here is the wifi connection... now i take ages to download the games via market... its fast until i get 60m then its a pain :S
Sounds like a probmatic patch.
Related
Hi friends
New rom I5801ZHJPF is available for galaxy 3 (samfirmware.com)
Has anyone tested?
Update
I flashed it,
1) no click sound during calls
2) screenshot works
3) better speed than orange
4) clean rom, no junk preinstalled
5) battery yet to check
Sent from my GT-I5801 using XDA App
already thread on the same merging this with the same
hi
for ur info i just saw new Asia 2.2 firmware today I5801ZHJPF ## dated March 2011 pls get the same from : www.samfirmware.com
link : http://hotfile.com/dl/112104901/352c9c8/I5801ZHJPF.rar.html
Pass word : samfirmware.com
tnx
hari
it's seems that it is different from JPM or other firmware
so far so good.
Just got the phone up. So not much testing done. But screen capture does work.
hi hari can u check I5801ZHJPF this firmware.. how its works and what about battery life..
dhruvasoni said:
hi hari can u check I5801ZHJPF this firmware.. how its works and what about battery life..
Click to expand...
Click to collapse
Just finished installation of this firmware.
First noticeable difference is that baseband version is different from previous versions, i think different from JPM too...
Will try this firm for a day or more and will post the comments.
jaskiratsingh said:
Just finished installation of this firmware.
First noticeable difference is that baseband version is different from previous versions, i think different from JPM too...
Will try this firm for a day or more and will post the comments.
Click to expand...
Click to collapse
Is it a operator locked firmware or is it a free firmware?what is the default language?
Sent from my GT-I5800 using XDA App
ronhoover88 said:
Is it a operator locked firmware or is it a free firmware?what is the default language?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
it is for Hongkong ..!! (ref- Check your status of your firmware here link on samfirmware)
ronhoover88 said:
Is it a operator locked firmware or is it a free firmware?what is the default language?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
free firmware with chinese as default language
I flashed this yesterday, after having bvjp9 for a while. I like it and it certainly feels faster. UK English was default language for me, although, i had to change the keyboard from Chinese to Samsung. No issues thus far, and little bloatware.
Sent from my GT-I5801 using XDA Premium App
ROLY5573 said:
I flashed this yesterday, after having bvjp9 for a while. I like it and it certainly feels faster. UK English was default language for me, although, i had to change the keyboard from Chinese to Samsung. No issues thus far, and little bloatware.
Sent from my GT-I5801 using XDA Premium App
Click to expand...
Click to collapse
What about battery?
ROLY5573 said:
I flashed this yesterday, after having bvjp9 for a while. I like it and it certainly feels faster. UK English was default language for me, although, i had to change the keyboard from Chinese to Samsung. No issues thus far, and little bloatware.
Sent from my GT-I5801 using XDA Premium App
Click to expand...
Click to collapse
hi
it did not work for me i don't know what i did wrong
it got stuck on the white samsung screen did not go beyond that
so went back to JPM
tnx
hari
haree said:
hi
it did not work for me i don't know what i did wrong
it got stuck on the white samsung screen did not go beyond that
so went back to JPM
tnx
hari
Click to expand...
Click to collapse
it wont work from JPM. You need to rollback to DDJG6 and then update to this one....
Also remove boot.bin and sh.bin from package to avoid bricking
i notice this ,Taiwan ver is ZFJPF is Provider firmware
have Q MARKET and some useless software inside
this ver I5801ZHJPF is me update from kies ZHJH1 "street buy ver"
it have a "windows live msg" is only work on hongkong 3G network(wifi is not work)
Been using this ROM since morning. So far so good. Below is my observation:
1. Battery bug is there. When battery goes down, restart phone and it is good again
2. GPS is same as JPM. Got sattelite connection in under 10 seconds
3. I dnt know but looks like its me with the popping sound. Majorly happens when i am using headphones and screen goes Blank. Wake up the phone and it pops
4. Media Scanning takes longer than JPM
god_md5 said:
i notice this ,Taiwan ver is ZFJPF is Provider firmware
have Q MARKET and some useless software inside
this ver I5801ZHJPF is me update from kies ZHJH1 "street buy ver"
it have a "windows live msg" is only work on hongkong 3G network(wifi is not work)
Click to expand...
Click to collapse
The version I used was ZHJPF, downloaded from another post, using medifire, before this was released by Samfirmware, and there are no erroneous apps present.
I am now able to browse the internet using HSPDA, previously only 3G was available to me using JP9. Perhaps my GiffGaff signal has improved, but it seems coincidental.
It is most definitely faster, than JP9, and, I will be keeping a close watch on battery life. WiFi and GPS are also working well. I am now rooted, and my Live Wallpapers are running smoothly.
I wanted to keep my 5801 identity, and until we get something decent in Europe, I would recommend this firmware, as a good Froyo base.
ROLY5573 said:
The version I used was ZHJPF, downloaded from another post, using medifire, before this was released by Samfirmware, and there are no erroneous apps present.
I am now able to browse the internet using HSPDA, previously only 3G was available to me using JP9. Perhaps my GiffGaff signal has improved, but it seems coincidental.
It is most definitely faster, than JP9, and, I will be keeping a close watch on battery life. WiFi and GPS are also working well. I am now rooted, and my Live Wallpapers are running smoothly.
I wanted to keep my 5801 identity, and until we get something decent in Europe, I would recommend this firmware, as a good Froyo base.
Click to expand...
Click to collapse
can u plz post the link for the fw u got from mediafire.. i wanna chek it out mate!! thanz in advance
drajax said:
can u plz post the link for the fw u got from mediafire.. i wanna chek it out mate!! thanz in advance
Click to expand...
Click to collapse
Here is the medifire link for I5801ZHJPF
http://www.mediafire.com/?rea1ua6dhi9ua39
I like this firmware, but I can't say that I have noticed any change in battery usage.
Hi Guys,
I am facing problem re-upgrading to this ROM. Due to certain reason i had to install JPM. Afterwards i rolled back to DDJG6 and updated to this one but stuck at Samsung Logo.
Tried removing cache, factory reset but unable to upgrade to this one...
Kindly suggest
jaskiratsingh said:
Hi Guys,
I am facing problem re-upgrading to this ROM. Due to certain reason i had to install JPM. Afterwards i rolled back to DDJG6 and updated to this one but stuck at Samsung Logo.
Tried removing cache, factory reset but unable to upgrade to this one...
Kindly suggest
Click to expand...
Click to collapse
The Baseband version for this is I5801ZHJP3; not sure that helps you, but when I flashed initially, I went from JP9, and did not factory reset, and it worked just fine as an upgrade. I tried it, liked it and then reset and clean flashed.
Samfirmware twittered Froyo by the end of April for Galaxy 3, so our best bet is to try and use what we can for now.
As the title says just spotted this on twitter, now who is going to try this first!
http://hotfile.com/dl/121450355/2a1ed4f/I9100XWKF3_KCLKF1_XXKE7.rar.html
I will... Where can I download it?
Sent from my GT-I9100 using XDA App
Edited first post with a link
phorcesquad said:
I will... Where can I download it?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Link to the file: http://hotfile.com/dl/121450355/2a1ed4f/I9100XWKF3_KCLKF1_XXKE7.rar.html
Cheers Here's a mirror:
http://www.multiupload.com/ABMQQY8GJH
would like to see what this does leme know how it goes...
quick question i am new to android...i have a rooted uk handset with ke7 firmware...from what i have been reading am i right in thinking this kf3 is the next one for the uk??? and if i do update using this will i lose my root and need to re root
thanks
and " KCL" mean??
rikz112 said:
would like to see what this does leme know how it goes...
quick question i am new to android...i have a rooted uk handset with ke7 firmware...from what i have been reading am i right in thinking this kf3 is the next one for the uk??? and if i do update using this will i lose my root and need to re root
thanks
Click to expand...
Click to collapse
Each time you flash new firmware you will need to re-root
ams84 said:
and " KCL" mean??
Click to expand...
Click to collapse
I was thinking that too.
and remember the password is: samfirmware.com
KCL=Kazakhstan I think
daleski75 said:
Each time you flash new firmware you will need to re-root
Click to expand...
Click to collapse
THANKS very much is this new kf 3 still 2.3.3 im guessing....???
rikz112 said:
THANKS very much is this new kf 3 still 2.3.3 im guessing....???
Click to expand...
Click to collapse
From what samfirmware say yes it is still 2.3.3
yup just checked twitter see that its still 2.3.3 so wont hope for any battery issues to be resolved by this one ....
What modem version is it?
bentez2003 said:
What modem version is it?
Click to expand...
Click to collapse
When people start flashing their phones I am sure one of them will answer your question.
Can I use odin to flash this over the top of stock KE7 XEU?
Will this new firmware change my CSC code?
Thanks.
Is this later than KF4 and will it wipe the phone data?
Today was my first proper day using KF4 and I've watched videos; listened to music, done texts and emails and got info through H on various apps and after 11.5 hrs I'm still on 51% which is the best so far so I'm interested to see if KF3 makes a difference.
Date-wise, KF2 is actually a newer release than KF4, and people are reporting fantastic battery life with KF2.
Kf3 is the europe version im pretty sure samfirmware commented in a thread earlyier saying so
Sent from my GT-I9100 using XDA App
Ok flash freaks, it's now available:
Firmware: http://www.multiupload.com/SKUPDRAOKL
Stock Kernel: http://www.multiupload.com/2FF735VQD5
Password: [email protected]
Frankenstein XEUKH2 version: http://www.multiupload.com/NAPKDLWC5B
Been using it a few days now and it's worth while updating from XXKI3.
Can I ask what differences you have noticed yourself?
Stability/speed differences? Features?
Thanks in advance
eta:
im at work so cant download and test...
It's a test ROM, also available through KIES (in test mode).
Thanks Intratech!
tsinc said:
It's a test ROM, also available through KIES (in test mode).
Thanks Intratech!
Click to expand...
Click to collapse
It's going to be released officially in the coming days.
Intra, which CSC have you used in the XEU package. (as in KD1, KI3 etc)
Is this a newer version than ki8 or is it between ki3 and ki8?
Sent from my GT-I9100
Ok, I'm confused.
A new ROM with the same code as an old one?
Is it 2.3.5 or .4?
Shouldn't we be getting KJ ROMs, since we are pass mid October?
I just want to confirm the Frankenstein version is non wipe as before? Also, does it have the old bootloader? Thanks.
Molitro said:
Ok, I'm confused.
A new ROM with the same code as an old one?
Is it 2.3.5 or .4?
Shouldn't we be getting KJ ROMs, since we are pass mid October?
Click to expand...
Click to collapse
you are wrong the other KI4 was XWKI4 2.3.4
this one is XXKI4 2.3.5
To answer my own (and another) question:
The XEU package includes the KH2 CSC file
Yes, the XEU package is non-wipe, as it's a 1 file flash in Odin (that's the quick way to tell if it's wipe or not)
Intratech said:
Been using it a few days now and it's worth while updating from XXKI3.
Click to expand...
Click to collapse
Can you elaborate the above line?
XXKI4 just be posted on samfirmware, how can you use this already few days
are you a insider?
Just flashed it thanks intra. Anyone have an eta on stock root kernel?
None wipe also before anyone asks! Lol.
Sent from my GT-I9100 using xda premium
ghmail2 said:
XXKI4 just be posted on samfirmware, how can you use this already few days
are you a insider?
Click to expand...
Click to collapse
He's THE insider -.-'
Sent from my GT-I9100 using XDA App
Skyline92 said:
He's THE insider -.-'
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
then fair enough
fuze_freak said:
you are wrong the other KI4 was XWKI4 2.3.4
this one is XXKI4 2.3.5
Click to expand...
Click to collapse
Ok, fair enough... XX instead of XW. I still think is quite a confusing use of the coding, specially the way we use it here (where usually we pretty much ignore the zone code) but ok.
What's the modem version bundled with this and how's it faring?
Molitro said:
Ok, fair enough... XX instead of XW. I still think is quite a confusing use of the coding, specially the way we use it here (where usually we pretty much ignore the zone code) but ok.
Click to expand...
Click to collapse
True but that's the way sammy likes to make their Roms i personally hate it they should make a global Rom
Sent from my GT-I9100 using Tapatalk
I'll try myself when i get a free moment at work, but in the mean time if anyone could let us know which kernel works for root that would be great.
Intratech said:
It's going to be released officially in the coming days.
Click to expand...
Click to collapse
Is this the official version or the test one?? Will release in a couple of days differ from this??
Good to see it contains the old bootloader meaning I could wipe any evidence of my flashing habit
I won't post the link in here, you can get it from the firmware thread in the dev forum. You can thank TheMegaStar for that as he seems incapable of going to another thread to read before he downloads and flash anything or to decipher the firmware components from the name.
Anyway, discuss your finding and observations of XWKJ1 in here.
Intratech said:
I won't post the link in here, you can get it from the firmware thread in the dev forum. You can thank TheMegaStar for that as he seems incapable of going to another thread to read before he downloads and flash anything or to decipher the firmware components from the name.
Anyway, discuss your finding and observations of XWKJ1 in here.
Click to expand...
Click to collapse
Fully understand. Its the same thing everytime new firmware is released.
Sent from my A500 using xda premium
Thanks Intratech. Are you planning a XEU frankenstein version?
Anyone flashed yet? Results?
Yes, it's being uploaded. I've changed the modem to XXKI3 modem as I tested it against the XXKI4 modem and it was more battery efficient on the O2 network but the performance was similar.
Intratech said:
Yes, it's being uploaded. I've changed the modem to XXKI3 modem as I tested it against the XXKI4 modem and it was more battery efficient on the O2 network but the performance was similar.
Click to expand...
Click to collapse
Cheers for the heads up! Im on KI4 With KI4 modem, Think ill switch back to KI3 Modem
Intratech said:
Yes, it's being uploaded. I've changed the modem to XXKI3 modem as I tested it against the XXKI4 modem and it was more battery efficient on the O2 network but the performance was similar.
Click to expand...
Click to collapse
Thanks a lot, as always.
PS: I'm happy about the KI3 modem choise, KI4 performs worse than KI3 on my h3g network
Intratech said:
Yes, it's being uploaded. I've changed the modem to XXKI3 modem as I tested it against the XXKI4 modem and it was more battery efficient on the O2 network but the performance was similar.
Click to expand...
Click to collapse
Intra how long till upload?
Intratech said:
Yes, it's being uploaded. I've changed the modem to XXKI3 modem as I tested it against the XXKI4 modem and it was more battery efficient on the O2 network but the performance was similar.
Click to expand...
Click to collapse
Thanks again Intratech.
I agree on KI3 modem, it was better for me too and Im on Orange.
Google Voice
Before some asks video in Google Voice is NOT working.
Charlie C
madpete said:
Thanks again Intratech.
I agree on KI3 modem, it was better for me too and Im on Orange.
Click to expand...
Click to collapse
hi mate quick question u on orange uk?? is ur push email working?? mines seems to have stopped i can set as non premium account and i can set frequency and do it but cannot set up a push one again... was working till my recent update to ki4 2.3.5
andresalonika said:
Intra how long till upload?
Click to expand...
Click to collapse
Also waiting on the KI3 modem version lol
ki3 modem would not work with 3g gsm here on att in the usa.. it work with hspda but would not slow down to the slower 3g.. ki4 works fine.
Sorry for the delay lads. Got side track with some system analysis work I need to finish asap.
Here is the Frankenstein XEUKH2 build: http://www.multiupload.com/QYQLC8KGJ8
PDA: XWKJ1| Phone: XXKI3| CSC: XEUKH2
Wicked, thanks intra. Downloading now
Sent from my GT-I9100 using xda premium
cc999 said:
Before some asks video in Google Voice is NOT working.
Charlie C
Click to expand...
Click to collapse
I don't get the big deal with this everytime a firmware is released. It's so easy to just delete the talk.apk and talk.odex and just add the libtalk_jni.so to the lib directory and copy the talk2.apk to the app directory and you'll have google talk with video..... or if you have CWM then it's as simple as flashing a zip.
JPKJ2 Is very Good
Thanks IntraTech...I am useing JPKJ2 with XEUKH2... I flashed XEUKH2 CSC
I feel KJ2 is good compare to KI3/4...Its more snapper & fast.
IntraTech One Question regarding I9100ZCKJ1
http://forum.xda-developers.com/showthread.php?t=1317372
Some one have posted it saying its 2.3.6
I see this ROM is avilab in TEST Mode
Product Code: GT-I9100LKACHN
Latest firmware: I9100ZCKJ1/I9100OZHKJ1/I9100ZCKJ1/I9100ZCKJ1
Modified: 19-10-2011 PM 02:57:46
Filename: GT-I9100_CHN_1_20111019144923.zip.enc2
Can we have Frankenstein version Normal I9100..
It that ROM 2.3.6 ....?
Getting constant f.c, com.android.phone. first time I've ever had this after a flash.
Sent from my GT-I9100 using xda premium
Was about to flash this but I certainly don't want any com.android.phone fc's. Anyone else having this problem and if so, is it easy to fix?
TheSopranos16 said:
Was about to flash this but I certainly don't want any com.android.phone fc's. Anyone else having this problem and if so, is it easy to fix?
Click to expand...
Click to collapse
last time i had it it was fixed by a factory reset
factory reset fixed it when i got FCs
hi guys I just bought a new sgs2 from bell canada and now Ive rooted the phone with all the instructions inside XDA and I have the CWM app in my phone with superuser but when I go in CWM and want to reboot in clockworkmod recovery its just rebooting into the blue menu with only 4 choice wish are
reboot now
wipe x.....
wipe..
that's it I just cannot bo into clockworkmod why ?? Ive tried to unroot the phone and made full factory reset but I just can't see this crazy menu that let me safe the file etc..
I'm guessing u flashed backed to stock kernel?
Sent from my GT-I9100 using xda premium
yes because of the yellow sign ! it is just my trouble ?
mathsmart said:
yes because of the yellow sign ! it is just my trouble ?
Click to expand...
Click to collapse
Yes; no cwm recovery for you if you've flashed the Bell kernel back on.
mudferret said:
Yes; no cwm recovery for you if you've flashed the Bell kernel back on.
Click to expand...
Click to collapse
+1
Sent from my GT-I9100 using xda premium
i just put back the custom root without reflashing the stock kernel and its seem to work !!!
im just not sure if Ive made it correcly
my android version is still 2.3.3
VERSION DE LA BANDE DE BASE
I9100MUGKG2
kernel verSion
2.6.35.7-i9100XXKG2-CL375027 [email protected] #2
number of version
gingerbread.ugkg2
I dont know if I can upgrade or not since I do want it to work with kies and have all the upgrade
is it fine ?
mathsmart said:
i just put back the custom root without reflashing the stock kernel and its seem to work !!!
im just not sure if Ive made it correcly
my android version is still 2.3.3
VERSION DE LA BANDE DE BASE
I9100MUGKG2
kernel verSion
2.6.35.7-i9100XXKG2-CL375027 [email protected] #2
number of version
gingerbread.ugkg2
I dont know if I can upgrade or not since I do want it to work with kies and have all the upgrade
is it fine ?
Click to expand...
Click to collapse
As long as its just the kernel you've changed kies should b fine
Sent from my GT-I9100 using xda premium
can I upgrade to 2.3.4 or 2.3.5 in my situation ? I want to have the best for the phone and have the last firmware for it and it must work with the bell signal ! and still working with kies to have the last updates
Ive experimented some slow speed and no 3G over there I just see H+ with a speed of 1000kbps and 400 ms ping and that's sux Ive looked into the bell community but there is just too much thing and/or I dont understand it ! ive read all the HOW TO but ...
mathsmart said:
can I upgrade to 2.3.4 or 2.3.5 in my situation ? I want to have the best for the phone and have the last firmware for it and it must work with the bell signal ! and still working with kies to have the last updates
Ive experimented some slow speed and no 3G over there I just see H+ with a speed of 1000kbps and 400 ms ping and that's sux Ive looked into the bell community but there is just too much thing and/or I dont understand it ! ive read all the HOW TO but ...
Click to expand...
Click to collapse
As long as you're on stock Rom and not a frankenstien package you can upgrade when there is an upgrade available for your country/ carrier. If you want upgrade before use odin
Sent from my GT-I9100 using xda premium
mathsmart said:
can I upgrade to 2.3.4 or 2.3.5 in my situation ? I want to have the best for the phone and have the last firmware for it and it must work with the bell signal ! and still working with kies to have the last updates
Ive experimented some slow speed and no 3G over there I just see H+ with a speed of 1000kbps and 400 ms ping and that's sux Ive looked into the bell community but there is just too much thing and/or I dont understand it ! ive read all the HOW TO but ...
Click to expand...
Click to collapse
The latest Samsung build I tried was KI4; excellent firmware and is leaps and bounds above the Bell firmware in every aspect. There are newer 2.3.5 builds, but I'm not on a Samsung based ROM currently.
Bell Canuck thread.
Firmware thread.
Search Original Android Dev for the latest/greatest firmware; it changes rapidly.
I wouldn't worry about updating your firmware via Kies if you're on Bell; you may NEVER see an update.
thanks for your fast reply guys !
but I dont understand why everyone tell (you must check your cell version like KG2 ,KG3 etc.. and its must be the same) and you guys running very different think as we should in North america ? like some guys running poland version ?
if I download the same version as your will it fit with my phone since I just posted all the infos of my phone right here ?
Ive tried to pu a different modem in the phone section of odin and clicked on start and its just freezed so I was like SHHHHHHHIT did I just broke it so its ok I was able to fix it right after !
I suppose I should not just one file in PDA but in all the 3 right ? and all the 3 MUST be the same right ?
im so sorry IM A NOOB! but there are toooo much informations everywhere and I dont want to **** my 599$phone with one simple click lol since BELL dont give a ....of there customers !
mathsmart said:
thanks for your fast reply guys !
but I dont understand why everyone tell (you must check your cell version like KG2 ,KG3 etc.. and its must be the same) and you guys running very different think as we should in North america ? like some guys running poland version ?
if I download the same version as your will it fit with my phone since I just posted all the infos of my phone right here ?
I suppose I should not just one file in PDA but in all the 3 right ? and all the 3 MUST be the same right ?
im so sorry IM A NOOB! but there are toooo much informations everywhere and I dont want to **** my 599$phone with one simple click lol since BELL dont give a ....of there customers !
Click to expand...
Click to collapse
Read and research some more until you're comfortable. You only have to worry about matching kernel to firmware if you're doing a simple root, and retaining your current firmware. I've run 3 or 4 of the XXK_ _ firmwares, which are all Euro specific. No issues whatsoever.
Bell would likely tell you to pound sand if you tried to get warranty work done however, despite the fact you would have an official Samsung firmware (but not Bell's firmware).
When/if you flash a non-Bell firmware follow the instructions in the thread I linked to the letter, and yes, PDA is all you need, it has CSC, kernel, etc... in it.
You can then track down a CF-Root kernel for that firmware.