Related
Hi all,
I managed to brick my device during radio upgrade (check my last post on http://forum.xda-developers.com/showthread.php?t=632869&page=2) so now my magic is showing some picture after powering on which i do not understand what it means - after few seconds this picture blacks out and that's it (display is lit but it is black).
Fastboot, recovery and goldcard process are not available.
Help is appreciated, and also suggestions to revive it as well.
P.S. I tried to give it to the service, they said "Tampered boot" and returned the unit back to me as is so I am on my own here :-(
over 100 reads and no answers? C'mon people, I am sure that there has got to be someone who knows what this picture means
The picture is a system screen. It's in the background while updating roms and what not. What version of android are you running and can you get into any boot screens ie. powering on using back and home at the same time?
To be quite honest I do not know which version of android was on before - i just know that it happened during uploading radio 6.35.08.29.
Back + Home + Power on shows same picture.
If I put same radio as update.zip on the SD card would it have any sense??
mjagar said:
To be quite honest I do not know which version of android was on before - i just know that it happened during uploading radio 6.35.08.29.
Back + Home + Power on shows same picture.
If I put same radio as update.zip on the SD card would it have any sense??
Click to expand...
Click to collapse
Well it's been a while for me, but it seems like that pic is from the original recovery, you require amon's recovery.
Have you gone through the steps from Cursordroid, upgrading/downgrading SPL and Radio? Follow his procedure, grab all the correct files and use Fastboot.
Bedeadu said:
Well it's been a while for me, but it seems like that pic is from the original recovery, you require amon's recovery.
Have you gone through the steps from Cursordroid, upgrading/downgrading SPL and Radio? Follow his procedure, grab all the correct files and use Fastboot.
Click to expand...
Click to collapse
Can't use fastboot because i cannot bypass this part with boot picture :-(
I also noticed this thread: http://forum.xda-developers.com/showthread.php?t=632102 - exactly happened to me, semms like this radio version 6.35.08.29 when uploading from SD card is bricking a phone sometimes - BEWARE !!!
Please explain how to do recovery from cursordroid - have in mind that I only have SD card, I cannot reach fastboot, recovery or anything... If it can be done by putting some files to sdcard please describe it and if successfull i am buying beer... Hell, if it works i might introduce you to my younger sister ;-)
As you now have a 6.35* radio, can you do this?
Code:
adb shell
flash_image hboot hboot-1.76.2007.img
sindrefyrn said:
As you now have a 6.35* radio, can you do this?
Code:
adb shell
flash_image hboot hboot-1.76.2007.img
Click to expand...
Click to collapse
"error: device not found"
A few days ago my 32a did the same thing. I tried to use fastboot and didm't work. I had 6.35 radio and I had updated it like it said in the instructions.. I took the batery off several times, and it booted properly.. Try to do that.. Sorry for my english..
Sorry for my bad english ,
It's happen to me too. Yesterday I had my friend’s htc magic . He gave me that because he said that it was briked. When I press back+power or voldown+power or home+power , the result is same like picture in first post.
no adb and fastboot worked . How about you ? Is your phone normal again ?
thanks before .
Hi, no unfortunatelly my phone is still bricked - i removed baterry at least hundred times but no change... :-(
mjagar said:
Hi, no unfortunatelly my phone is still bricked - i removed baterry at least hundred times but no change... :-(
Click to expand...
Click to collapse
I think your phone is 99% bricked. Press hang + back, if you can entry hboot mode. Then try the attachment files.
Please be sure your phone is rooted and not perfect SPL.
GOOD LUCK!
View attachment 292085
View attachment 292095
View attachment 292096
View attachment 292098
hm.....that pic was displayed after I upgraded Radio, too. but then it was back to recovery mode, and I reboot & my phone work normaly w radio updated... So I think it's not danger pic :-?
once youre in that recovery mode, if you hit the home + back again anything happen?
i know if i get that screen on the Dream, I hit home +back again it changes my screen with options.. On your phone it may be vol dn + home try it out, mine gives me the option to flash update.zip from my SD card again.
Unfortunatelly I cannot get to hboot (home + red button), nor fastboot (back + red button) nor even volume DN + redbutton...
Looks like it is bricked 100%.
So guys, be carefull when upgrading radio 6.35.08.29 :-(
mjagar said:
Unfortunatelly I cannot get to hboot (home + red button), nor fastboot (back + red button) nor even volume DN + redbutton...
Looks like it is bricked 100%.
So guys, be carefull when upgrading radio 6.35.08.29 :-(
Click to expand...
Click to collapse
Read carefully and follow the instruction here: http://forum.xda-developers.com/showthread.php?t=605239
then i don't think there is to much to worry about!
For me it sounds like you updated the radio and restarted the mobile before updating the SPL. OR you forgot to check the m5dsum of the radio and flashed a broken radio file to your mobile.
It's IMPORTANT that you guys remember to check md5sum of the files before flashing em cause a broken radio/spl file can brick the phone!
same pictrue on my magic
My magic have same picture. I try to study Android for help it.
I see more and more threads like this and no movement in direction which could unbrick the phone without changing the motherboard...
Seems like I'm in the same situation as the OP. Got the same picture and can't do anything about it.
htc magic stuck in htc magic boot screen, it keeps rebooting after playing the htc welcome sound.
it was not rooted before & i have no backup room. fastboot can't recognize the device
C:\SDK_15\tools>fastboot devices
< waiting for device >
all the drivers are installed
is there any chance to recover it?
by any chance you got your phone from Smart Telecom in Manila? Rockwell? White HTC Magic?
I dont want to open one more thread so I'll share my doubt here.
I've bricked my Magic and I supose that warranty doesnt cover it. What about if I drop my magic, for exemple, and send it to HTC ? Would they fix it ?
octupusisonfire said:
I dont want to open one more thread so I'll share my doubt here.
I've bricked my Magic and I supose that warranty doesnt cover it. What about if I drop my magic, for exemple, and send it to HTC ? Would they fix it ?
Click to expand...
Click to collapse
If they find out it was due to rooting they will charge you for any repairs. If not, then you are lucky and you get a free repair
chinang said:
by any chance you got your phone from Smart Telecom in Manila? Rockwell? White HTC Magic?
Click to expand...
Click to collapse
white htc magic mate. so is there a chance to recover it?
were you trying to root, install rom, update recovery, radio ect ect ??
can you access recovery?
this happens when installing a 32b/g1 rom and forgetting to install the port file.. did that happen?
digitaljeff said:
were you trying to root, install rom, update recovery, radio ect ect ??
can you access recovery?
this happens when installing a 32b/g1 rom and forgetting to install the port file.. did that happen?
Click to expand...
Click to collapse
yes i can access recovery mode but there's no options in there
in fastboot mode,
Does it appear fastboot USB ?
jgcaap said:
in fastboot mode,
Does it appear fastboot USB ?
Click to expand...
Click to collapse
yes, it appears
if you do fastboot devices what happens?
What version is your phone? 32A or 32B? Is HTC Magic sapphire or mytouch?
Could you copy to here the fastboot text of phone details? Thanks
jgcaap said:
if you do fastboot devices what happens?
What version is your phone? 32A or 32B? Is HTC Magic sapphire or mytouch?
Could you copy to here the fastboot text of phone details? Thanks
Click to expand...
Click to collapse
thx for ur reply mate
AFTER DOING FASTBOOT
C:\SDK_15\tools>fastboot devices
< waiting for device >
here's the info
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (sapp10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009,21:02:32
REGARDS
paloma728 said:
thx for ur reply mate
AFTER DOING FASTBOOT
C:\SDK_15\tools>fastboot devices
< waiting for device >
here's the info
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (sapp10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009,21:02:32
REGARDS
Click to expand...
Click to collapse
Alright from what i can understand is a native htc. You havnt rooted right? Do you have warranty from HTC? Because if you do you should use it there should be a maulfunction hardware and we should not do any experiments in order to try fix something wich maybe has a malfunction, and then you loose warranty.
If you dont have the warranty, then please tell me, have you done anything in particuler to make the phone become like this? If yes please tell me exacly what in order to find a suitable solution .
jgcaap said:
Alright from what i can understand is a native htc. You havnt rooted right? Do you have warranty from HTC? Because if you do you should use it there should be a maulfunction hardware and we should not do any experiments in order to try fix something wich maybe has a malfunction, and then you loose warranty.
If you dont have the warranty, then please tell me, have you done anything in particuler to make the phone become like this? If yes please tell me exacly what in order to find a suitable solution .
Click to expand...
Click to collapse
i have no warranty mate. i hv done nothing to the phone. concerning experiment im ready ks i hv nothing to lose.
besides, two weeks ago i gave to a gsm-shop for unlock, is there any chance of..........
ok lets try this first without rooting. try to put in fastboot mode and upgrade a ROM from HTC official site same version you are using now. (Not the update from january but november)
the unlock procedure does not affect the phone performance so do not worry. is a complete seperate region in your phone.
http://www.htc.com/pt/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
this one for example or:
http://forum.xda-developers.com/showthread.php?t=659403
24) [xda-ftp] [4shared] 3.05.401.3 HTC Europe (this is a great rom in case you are from europe)
jgcaap said:
http://www.htc.com/pt/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
this one for example or:
http://forum.xda-developers.com/showthread.php?t=659403
24) [xda-ftp] [4shared] 3.05.401.3 HTC Europe (this is a great rom in case you are from europe)
Click to expand...
Click to collapse
TRIED THE THREE MODEs :fastboot,recovery, and normal mode. BUT ALWAYS GETS CONNECTION ERROR. all the drivers ar installed. the pc recognizes the device as storage device & as android bootloader interface when using fastboot mode. i can't access the menu to change connection option
mayb i should try sdcard flashing but i do need this zip file sappdiaG.zip
after trying a room update.zip using sd i got these errors
loading.....sappdiag.zip
no image!
loading sappdia3.nbh
no image or wrong image
loading sappdia2.nbh
no image or wrong image
loading sappdiag.nbh
no image or wrong image
loading.....sappdiag.zip
no image!
am i missing something here?
thats normal is not update but sappimg.img . you can do that but before you should be able to update in fastboot mode without problems.
If you have a firewall remove, sometimes it inteferes.
In case doesnt update in fastboot the offficial HTC update read and follow instructions:
http://translate.google.pt/translat...ss.C3.A1rio_para_fazer_o_processo&sl=pt&tl=en
Read everything, Skip the create the gold card method.
and do exacly as is written in english (You dont need to format the card)
Basicly is:
Download http://rapidshare.com/files/267446145/2.53.707.2_-_sappimg.zip
insert on your SD card. run in Hboot (Down volume + back)
The phone is going to update the new rom. Be patient, the first time takes around 5-10 min most of the times.
download the hboot: http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
change the name to update.zip and copy to the SD card. Turn on the phone pressing power+home and it'll enter in safe mode. In safemode apply update.zip .
Then you should have something as: http://www.androidpt.info/images/d/d5/Magic0014_4.jpg
Then you'll flash a recovery so that you can install a rom
paloma728 said:
TRIED THE THREE MODEs :fastboot,recovery, and normal mode. BUT ALWAYS GETS CONNECTION ERROR. all the drivers ar installed. the pc recognizes the device as storage device & as android bootloader interface when using fastboot mode. i can't access the menu to change connection option
mayb i should try sdcard flashing but i do need this zip file sappdiaG.zip
after trying a room update.zip using sd i got these errors
loading.....sappdiag.zip
no image!
loading sappdia3.nbh
no image or wrong image
loading sappdia2.nbh
no image or wrong image
loading sappdiag.nbh
no image or wrong image
loading.....sappdiag.zip
no image!
am i missing something here?
Click to expand...
Click to collapse
just unroot and restart. get the sap.img and load it
jgcaap said:
thats normal is not update but sappimg.img . you can do that but before you should be able to update in fastboot mode without problems.
If you have a firewall remove, sometimes it inteferes.
In case doesnt update in fastboot the offficial HTC update read and follow instructions:
http://translate.google.pt/translat...ss.C3.A1rio_para_fazer_o_processo&sl=pt&tl=en
Read everything, Skip the create the gold card method.
and do exacly as is written in english (You dont need to format the card)
Basicly is:
Download http://rapidshare.com/files/267446145/2.53.707.2_-_sappimg.zip
insert on your SD card. run in Hboot (Down volume + back)
The phone is going to update the new rom. Be patient, the first time takes around 5-10 min most of the times.
download the hboot: http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
change the name to update.zip and copy to the SD card. Turn on the phone pressing power+home and it'll enter in safe mode. In safemode apply update.zip .
Then you should have something as: http://www.androidpt.info/images/d/d5/Magic0014_4.jpg
Then you'll flash a recovery so that you can install a rom
Click to expand...
Click to collapse
ok mate i will give it a try then post result.
thank you very much
did it work ?
Hi everyone
First im super noob to this i have used this forum to update software on my windows mobile device but android is a lot more dificult if you are noob.
Ok to start i strugled to get fastboot working but after aboout 3 days strugle i managed to get it working.
Then I flashed amon ra 1.70 and then after that i installed the engineering spl and then a custom rom. i cant remember the name of the rom but i have double checked that it is for HTC MAGIC and also 32A. after i flashed the rom i cant boot the phone it stays on the vodacom splash screen the first screen when i put my phone on.
I have tried numeres other roms but no luck it just doest want to boot!!! I can still go in to amon ra and still use fastboot if that is a help.
I can send all the details of the phone tonight when i get from work. But any help will be graetly apreciated.
Regards
Please post your fastboot info.
keinengel said:
Please post your fastboot info.
Click to expand...
Click to collapse
sapphire pvt 32A eng s-off h
hboot-1.33.2005 (sapp10000)
cpld-12
radio-3.22.20.17
Wrong spl. You need to install 1.33.2010.
keinengel said:
Wrong spl. You need to install 1.33.2010.
Click to expand...
Click to collapse
thanx i will have a look when i get home to update that.
Will that solve my problem?
Reaper21 said:
thanx i will have a look when i get home to update that.
Will that solve my problem?
Click to expand...
Click to collapse
I just upgraded the SPL to 1.33.2010 and still stuck on the boot screen.
I tried to install the rom again using fastboot flash system (rom).zip and it didnt work i dont know what to do must i also update the radio and if so how and where can i get the radio.
Please i am realy clueless now on what to do thanx for the help so far.
Okay, now you should have the right SPL and Radio. Start your phone in Recovery and connect it to your computer. Choose USB-MS Toggle and your phone's SD card will show up in My Computer. Copy the following files to the root of your SD card:
http://mirror.teamdouche.net/get/dream_sapphire/cm_dream_sapphire_full-285.zip
http://briancrook.ca/android/cm-ports/bc-6.1.0-ebi1-signed.zip
http://goo-inside.me/google-apps/gapps-mdpi-tiny-20101020-signed.zip
and safely remove the card using. Press Home on the phone to go out of the MS (Mass Storage) mode and then go to Flash zip from SD card. Flash them in the same order that I gave you above. When it's done, choose Reboot and it should boot up into a fully-working nightly build of CyanogenMOD.
keinengel said:
Wrong spl. You need to install 1.33.2010.
Click to expand...
Click to collapse
All 1.33.20xx where xx can be 04,05,09 or 10 do work for that radio. So you are not right on the one. The problem is simple, either he/she does not give enough time for the "new" rom to load all the way ( which is 7-15 mins) or he/she did not do a wipe before running the rom.
Do this and it WILL work:
Download my fastboot commander from my signature, magic version.
Boot into fastboot and start the tool.
Go to "Misc" tab. Select all partitions (in the RED box) and click "erase chosen partitions".
Go to "Magic 32A" tab and click on "flash new".
When done, reboot into custom recovery (hold home + power together for 5 sec and let go).
Use the trackball to navigate.
Use the "usb-ms toggle" and copy this file inside the sdcard.
Press home on the phone to return to menu and then select "Flash zip from sdcard".
Now select the file from above.
When done choose to reboot into system, and ENJOY :0)
NB: it will take like 10-15 min before the system starts up.
GOOD LUCK.
mumilover said:
All 1.33.20xx where xx can be 04,05,09 or 10 do work for that radio. So you are not right on the one.
Click to expand...
Click to collapse
Oops. Could have sworn .2005 only works properly with the 32B radio. My bad. Oh, well, he has 2010, which should be fine for all old-radio ROMs.
@Reaper21 To get you a bit more confused: 32A Magics (like the one you have) can run two different radio/spl combinations. One is the one you have (SPL 1.33.xxxx + Radio 3.22.xx.xx) - called "old radio" - and the second (SPL 1.76.xxxx + Radio 6.35.xx.xx) is the one you need to run most SenseUI ROMs (but others too - you'll spot them because the developers mention they are for the "new radio" or "6.35").
If you want a clean Android experience, closer to the default user interface, you can run CyanogenMOD and ROMs based on AOSP (Android Open Source Project) - most of them need the old radio. These have the advantage of always using the latest version of Android available.
If you want the fancier - but sometimes slower - SenseUI you can use the RCMagic (the one mumilover recommended), CleanMagic and others. The user interface is a lot friendlier, but you have to make do with Android 2.1 (instead of the latest official version - 2.2.1, with 2.3 coming up). This won't normally be a problem. I, for one, prefer SenseUI and I'm guessing mumi does too
Use mumilover's commander to switch between new and old. It should be safe, as long as your phone's battery is charged and you don't unplug the cable or anything
Let us know how it works out!
Ok guys internet was off for a while im having a look and downloading the files now. I realy hope it works. will keep you posted, and thanx for the replies so far
Dude thank you you are the best its working again booting into the mod and working fine accept the reason i Wanted to do the software is that for some reason my Sim cant cant register on to the network. I Have tried all 4 networks in my country and none work it just said that unable to connect to the network at this time try again later.
Can this be a hardeware fault?
But thanx at least the device boots and i can use GPS again
Is the phone locked to the original carrier?
Hello,
I recently tried to update the spl/radio to use a new rom on my HTC Magic 32A and after updating the spl the phone just hangs on the "HTC Magic" screen. Fastboot or Recovery wont start if I hold the buttons. Was just wondering if it is bricked or if it is possible to fix via cmd or so? I read alittle on jtag but I think if it came down to that Ill just buy a new phone cause this phone is not worth that much trouble.
I rooted the phone a year or so ago. First I had cyanogen but they dropped support so I switched too gingeryoshi but the wifi stopped working. It still connected to tmobile hotspot but I couldnt tether or connect to my wifi. So I thought of putting on Froyodragon. I updated too HBOOT-1.76.2007 but then it just hanged on reboot.
Thanks for any input.
Turn phone off (if you have bootloop then remove battery and place it back after 10-20 sec)
Turn on by pressing Back + Power - it's fastboot-mode
Write first 5 rows of info (all symbols are important)
If you do not have Android Sdk Tools configured - do it
Additionaly search for fastboot.exe - this utility can be absent from sdk tools
Connect phone to pc when it in fastboot-mode
Run
Code:
fastboot getvar cid
fastboot getvar cidnum
fastboot getvar version-main
Sent from my A7-040 using Tapatalk
hello,
I tired back+power, power+vol down, and power+home, they all just sit at the "HTC Magic" screen.
Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?
same problem
Sir im also facing the same problem like this person is facing:
I guess that I've bricked my HTC magic phone. actually it was working fine but after when i flash Hboot file named (ISO-8859-1__STOCK-HBOOT) on it.
my device stop functioning not any key is working phone its not coming up in hboot loader screen by pressing vol down key+power key, not even in recovery mode. by pressing home key+ power key.
but if i press vol down+power key its not showing any hboot loader screen but if i use command prompt after that and use fastboot devices command its shows the device like in machine language
just like this:
D:\adb\tools>fastboot devices
?╞ñ?¿╥§?4:¶♫ fastboot
here are the details of my mobile. is there any way to fix this issue?
HT03VPB03044
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-2.22.28.25
OCT 21 2009, 22:33:27
android 2.2.1
baseband version
62.50sj.20.17u_2.22.28.25
kernal version
2.6.32.9-g94b855e
[email protected] #1
buid number
3.56.531.1 CL300801 realase-keys
Sir i've also created gold card on my htc magic phone when it was working properly i've the image of gold card and the same card 512MB micro SD card which i used to create the gold card before but i dont know how it will work on the phone as it is not going into bool loader or in recovery mode.
please help me. i heard that if i got correct RUU file for this device i can troubleshoot the problem but in stock rom no any RUU file is working on it.
I've already tried there RUU ROM on this device:
RUU_Sapphire_T-Mobile_US_2.10.531.3_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_2.10.531.4_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_3.12.531.1_FRG83D_release_signed
RUU_Sapphire_TMUS_1.94.531.1_DMD6_release_signed_N oDriver
i request all the XDA member to help and troubleshoot this problem.
regards
Sandeep Deol
5[Strogino] said:
Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?
Click to expand...
Click to collapse
Yes I removed the battery (only way i could turn it off). I stated most of this info in the first post but Ill try and state specifically what versions I had. When I first rooted I used Cyanogen Rom. It worked fine but they dropped support so I switched too Gingeryoshi. I dont remember what version. I tried to update it too 1.5 first but it didnt work but fastboot and recovery still worked so I decided to switch to a new rom instead and tried Froyodragon but it needed radio 6.35.16.19 and HBOOT-1.76.2007. So I wiped it then I did the HBOOT-1.76.2007 and after installing and rebooting is when it stopped working.
Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.
jmdsdf said:
Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.
Click to expand...
Click to collapse
Wait 5-10 minutes, "yellow arrow coming from box" equals unpack and flash. Phone should finish this process.
Try to load into hboot-mode: turn phone off (remove battery and place it back if bootlooping), then turn on by pressing Volumedown + power
In this mode you can flash full official rom in sappimg.zip format (or sappimg.nbh if you have 32b magic)
If phone doesn't load into any mode (except trackball + power) - then you have brick and only jtag can help.
Sent from my A7-040 using Tapatalk
But, it goes to a black screen about ten seconds after that.. sadly I think it needs to be jtagged and i will just give it away for parts.
I also tried the sapphire image trick, no luck.
those all sound like bricks..
problem with 32b - looping after rom.
Believe me, I tried a lot here and on google before posting here.
I tried to install a ROM on my htc magic 32b and certainly was not what I should.
Information from my device:
SAPPHIRE PVT 32B SHIP S-ON G
Hboot-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
OCT 21 2009,22:33:27
I've read very, very much. I read that I have to change the SHIP for ENG.
Also read about ruu, but I found a will for my device, nor know how to run.
First of all, my phone is only on LOOP. I can normally access the fastboot USB.
But does not accept commands, I believe it because of S-ON.
I do not know how to install an img it to get S-OFF.
Could someone help me get back my life device?
Thank you and with the help of google translator.
huahua!!!!
No one post about my problem...
hello , i have htc wildfire pc49100 phone when start show only htc logo and sound after this restart and again repeat same .... i want to flash it but don't idea how , can you help me , thnx...........
svchost said:
hello , i have htc wildfire pc49100 phone when start show only htc logo and sound after this restart and again repeat same .... i want to flash it but don't idea how , can you help me , thnx...........
Click to expand...
Click to collapse
Sounds like you are in a bootloop good sir, have you rooted your phone before? If not your going to have to to get out of this. First things first though. Pull out that battery on your phone. Plug it back in, HOLD DOWN VOLUME DOWN and power until the phone boots into the boot loader. Tell me the information it says, will say hboot + numbers (important) and s-off or s-on. Ignore the rest I'll be up all night so hopefully we can get you sorted asap
sent from my ice cream sandwich powered HTC WILDFIRE B-)
heavy_metal_man said:
Sounds like you are in a bootloop good sir, have you rooted your phone before? If not your going to have to to get out of this. First things first though. Pull out that battery on your phone. Plug it back in, HOLD DOWN VOLUME DOWN and power until the phone boots into the boot loader. Tell me the information it says, will say hboot + numbers (important) and s-off or s-on. Ignore the rest I'll be up all night so hopefully we can get you sorted asap
sent from my ice cream sandwich powered HTC WILDFIRE B-)
Click to expand...
Click to collapse
ok with volume down and power key show me options to select recovery cleaR storage !! what to do now ....
Does it not tell you what your hboot is? Should say 1.01.0001 or 1.01.0002 or lower...
sent from my ice cream sandwich powered HTC WILDFIRE B-)
ok im off to bed here but if i was you i would boot your phone into hboot, connect it to the pc and try this http://shipped-roms.com/download.ph...45.55.24_3.35.15.31_release_130814_signed.exe if this doesnt work go to here http://shipped-roms.com/index.php?category=android&model=Buzz and try to select the one that is the same country and network as your phone was on. btw wwe stands for world wide english. good luck.
heavy_metal_man said:
Does it not tell you what your hboot is? Should say 1.01.0001 or 1.01.0002 or lower...
sent from my ice cream sandwich powered HTC WILDFIRE B-)
ok im off to bed here but if i was you i would boot your phone into hboot, connect it to the pc and try this http://shipped-roms.com/download.ph...45.55.24_3.35.15.31_release_130814_signed.exe if this doesnt work go to here http://shipped-roms.com/index.php?category=android&model=Buzz and try to select the one that is the same country and network as your phone was on. btw wwe stands for world wide english. good luck.
Click to expand...
Click to collapse
show this:
BUZZ PVT SHIP S-ON
HBOOT- 0.80.0002
MICROP-0622
TOUCH PANEL-ATMELC03_16AC
ok you want to run a ruu to upgrade the hboot, phone and rom. which if all goes well will fix your boot loop. but, you will lose all of your data. not much we can do about that though. follow the link in my post above and it will download a windows.exe program. boot your phone into the bootloader and plug in by usb to your windows pc. if all goes well the program will find your phone and run the upgrade.
off to bed, good luck pal
heavy_metal_man said:
ok you want to run a ruu to upgrade the hboot, phone and rom. which if all goes well will fix your boot loop. but, you will lose all of your data. not much we can do about that though. follow the link in my post above and it will download a windows.exe program. boot your phone into the bootloader and plug in by usb to your windows pc. if all goes well the program will find your phone and run the upgrade.
off to bed, good luck pal
Click to expand...
Click to collapse
ok i download rom but when want to flash show me usb error 170
drivers are ok everything ok i dont now ?????
please friend guide me how to done this htc..........
- Extract the ROM.zip from the RUU, if you are unable to install it over USB. There is a guide here:
http://lukasz.szmit.eu/2010/04/extracting-rom-files-from-htc-android.html
- Once you have that ROM.zip, rename it to PC49IMG.zip, place this ZIP file on your SDCard
- Reboot phone in HBoot Mode (i.e. Start using Vol Down + Power Key). Installation of the ROM should start.
3xeno said:
- Extract the ROM.zip from the RUU, if you are unable to install it over USB. There is a guide here:
http://lukasz.szmit.eu/2010/04/extracting-rom-files-from-htc-android.html
- Once you have that ROM.zip, rename it to PC49IMG.zip, place this ZIP file on your SDCard
- Reboot phone in HBoot Mode (i.e. Start using Vol Down + Power Key). Installation of the ROM should start.
Click to expand...
Click to collapse
if you haave anyone can you upload....thnx........
just follow the guide man
sent from my ice cream sandwich powered HTC WILDFIRE B-)
ok thnx to all i done it in another pc bcz problem is installed drivers's , but i want to know about htc phones, what is s-on , what is hboot , what i want to know when i want to flash htc phones etc...
svchost said:
ok thnx to all i done it in another pc bcz problem is installed drivers's , but i want to know about htc phones, what is s-on , what is hboot , what i want to know when i want to flash htc phones etc...
Click to expand...
Click to collapse
OK so s-on means security on. When on the phones nand (the hardware) is protected and cannot be written to. S-off means that the security is off and you have total control of your device. Boot loader and hboot are the same thing, they are what enforces the security, loads the phones rom into the ram to be used. The rom is essentially the android operating system and the recovery is a recovery. People on this forum usually want to s-off their device so they can put on custom roms and recovery also root = administration permissions. Usually needed to do system things and all requests for root are handled by the super user App need to know anymore?
Oh and glad you got your phone sorted pal
sent from my ice cream sandwich powered HTC WILDFIRE B-)
htc wildfire vibrate problem
heavy_metal_man said:
Sounds like you are in a bootloop good sir, have you rooted your phone before? If not your going to have to to get out of this. First things first though. Pull out that battery on your phone. Plug it back in, HOLD DOWN VOLUME DOWN and power until the phone boots into the boot loader. Tell me the information it says, will say hboot + numbers (important) and s-off or s-on. Ignore the rest I'll be up all night so hopefully we can get you sorted asap
sent from my ice cream sandwich powered HTC WILDFIRE B-)
Click to expand...
Click to collapse
i am having problem with htc wildfire PC49100
when i turn it on it just vibrate and keep rebooting.here is detail of my phone i can go to fast-boot mode and i also tried so many shipped roms but no luck at all.please help me to suggest exact rom which i need.my phone on h3g uk.i already tried the same network rom.
model-wildfire
buzz pvt ship s-on
hboot 1.01.002
microp-0622
touchpanel-atmel224_2099
radio-3.35.20.10
image version-2.46.0.0
error i having when i flash it
error 140 boot-loader version error
heavy_metal_man said:
Sounds like you are in a bootloop good sir, have you rooted your phone before? If not your going to have to to get out of this. First things first though. Pull out that battery on your phone. Plug it back in, HOLD DOWN VOLUME DOWN and power until the phone boots into the boot loader. Tell me the information it says, will say hboot + numbers (important) and s-off or s-on. Ignore the rest I'll be up all night so hopefully we can get you sorted asap
sent from my ice cream sandwich powered HTC WILDFIRE
Click to expand...
Click to collapse
I have a HTC Wildfire doing the same thing, I have been through the post and tried the advice given and still no results. can you give me some details on what im doing wrong?
BUZZ PVT SHIP S-ON
HBOOT-1.01.001
MICROP-0622
TOUCH PANEL-ATMEK224_201aa
Thanks in advance.
monufasterman said:
i am having problem with htc wildfire PC49100
when i turn it on it just vibrate and keep rebooting.here is detail of my phone i can go to fast-boot mode and i also tried so many shipped roms but no luck at all.please help me to suggest exact rom which i need.my phone on h3g uk.i already tried the same network rom.
model-wildfire
buzz pvt ship s-on
hboot 1.01.002
microp-0622
touchpanel-atmel224_2099
radio-3.35.20.10
image version-2.46.0.0
error i having when i flash it
error 140 boot-loader version error
Click to expand...
Click to collapse
did it work before? If yes: what did you try to achieve before the boot loops started? Did you try to root your phone?
---------- Post added at 06:08 PM ---------- Previous post was at 06:06 PM ----------
mbadboyz said:
I have a HTC Wildfire doing the same thing, I have been through the post and tried the advice given and still no results. can you give me some details on what im doing wrong?
BUZZ PVT SHIP S-ON
HBOOT-1.01.001
MICROP-0622
TOUCH PANEL-ATMEK224_201aa
Thanks in advance.
Click to expand...
Click to collapse
same here: did your phone work before and what did you do/ try to do before the boot loops started?
eventcom said:
did it work before? If yes: what did you try to achieve before the boot loops started? Did you try to root your phone?
---------- Post added at 06:08 PM ---------- Previous post was at 06:06 PM ----------
same here: did your phone work before and what did you do/ try to do before the boot loops started?
Click to expand...
Click to collapse
Eventcom, you're doing real good on these forums. You've improved hugely, well done.
Sent from my locked, tampered ville
usaff22 said:
Eventcom, you're doing real good on these forums. You've improved hugely, well done.
Sent from my locked, tampered ville
Click to expand...
Click to collapse
lol thanks mate - I guess that's a clear indication that I'm hanging around here too much - I should work on my discipline to get my own stale stuff done instead of making XDA my second home and time theft #1
mbadboyz said:
I have a HTC Wildfire doing the same thing, I have been through the post and tried the advice given and still no results. can you give me some details on what im doing wrong?
BUZZ PVT SHIP S-ON
HBOOT-1.01.001
MICROP-0622
TOUCH PANEL-ATMEK224_201aa
Thanks in advance.
Click to expand...
Click to collapse
ok try to place this file onto your sdcard,rename it pc49img.zip and boot into bootloader. if it will flash say yes (up volume button) should fix the problem, this will delete your current rom.also if this does not work do you have access to another htc wildfire? as you will need to make a goldcard.
monufasterman said:
i am having problem with htc wildfire PC49100
when i turn it on it just vibrate and keep rebooting.here is detail of my phone i can go to fast-boot mode and i also tried so many shipped roms but no luck at all.please help me to suggest exact rom which i need.my phone on h3g uk.i already tried the same network rom.
model-wildfire
buzz pvt ship s-on
hboot 1.01.002
microp-0622
touchpanel-atmel224_2099
radio-3.35.20.10
image version-2.46.0.0
error i having when i flash it
error 140 boot-loader version error
Click to expand...
Click to collapse
ok try to place this file onto your sdcard, rename it pc49img.zip and boot into bootloader. if it will flash say yes (up volume button) should fix the problem, this will delete your current rom. also if this does not work do you have access to another htc wildfire? as you will need to make a goldcard.
edit: these files are for your hboots specifically, dont swap them about
heavy_metal_man said:
edit: these files are for your hboots specifically, dont swap them about
Click to expand...
Click to collapse
let's see how this goes