Hey guys I was informed of an update on my tab today (10mb) update. Unfortunately it failed to install so I can't tell you what it does. Ill attach a couple of screenshots of my failed update.
I'm rooted, no custom rom, supercharged. Any way to be able to get the update to work? I'm able to download the update but after a reboot it tells me that it failed to install.
http://imgur.com/M0lYz
http://imgur.com/w7mKU
Its actually bed time in korea. Ill check back tomorrow.
What does supercharged mean?
I am rooted but on the stock ROM, I had the HW accelerated Launcher 2 as well. My update also failed several times. What I did to get it to work is fully charge the tablet overnight (instead of trying with it plugged in) and I restored from a nandroid backup to a state before the Launcher 2. Then I tried the update again and it worked.
Mad A said:
What does supercharged mean?
I am rooted but on the stock ROM, I had the HW accelerated Launcher 2 as well. My update also failed several times. What I did to get it to work is fully charge the tablet overnight (instead of trying with it plugged in) and I restored from a nandroid backup to a state before the Launcher 2. Then I tried the update again and it worked.
Click to expand...
Click to collapse
Here is the link on how to supercharge and other information:
http://forum.xda-developers.com/showthread.php?t=1256796
I was told by koe1974 that this update has to do with polaris office. I think if I am to get it I'd have to restore to a previous setting, but I'm willing to skip this update.
If you have a korean gtab you should follow this thread: http://forum.xda-developers.com/showthread.php?t=1360588
Related
Wtf got the ota update and its starts all good but then it hangs a yellow ! appears.. what can i do? i even did a factory reset i only was rooted and i took care of that.
zero313 said:
Wtf got the ota update and its starts all good but then it hangs a yellow ! appears.. what can i do? i even did a factory reset i only was rooted and i took care of that.
Click to expand...
Click to collapse
at least you are getting something OTA
Ditto
Unfortunately, I get the same thing. I was rooted, but I unrooted (not quite as thoroughly as you did, as I only used the "Unroot" option, but we got the same results). Wonder if it is something wrong with the update...
seanfrisbey said:
Unfortunately, I get the same thing. I was rooted, but I unrooted (not quite as thoroughly as you did, as I only used the "Unroot" option, but we got the same results). Wonder if it is something wrong with the update...
Click to expand...
Click to collapse
Did you change ANYTHING when rooted? Did you freeze, rename, modify or delete ANY of the files in the original ROM in any way, shape or form?
Same thing here
When I bought this device 3 weeks ago, I rooted it with z4root. Not too long after an update disabled z4root on the tablet.
I thought no big deal, but then today comes and I the OTA update won't work.
Anyone more experienced than me have any ideas of how to get this update applied properly?
Me too. Update failed to install. Not sure why. I have also tried unrooting.
FloatingFatMan said:
Did you change ANYTHING when rooted? Did you freeze, rename, modify or delete ANY of the files in the original ROM in any way, shape or form?
Click to expand...
Click to collapse
I'm confused, if I froze an application, didn't unfreeze it but did a factory reset...wouldn't that resolve the issue?
ok so i woke up this morning and my a500 notified me the there was an update available so as you can imagine I was very happy to finally have this, so i updated and when it was done it said update successuful but when I checked it still said 3.01......WTF
Not rooted ever..
Those interested in getting back their OTA, properly backing up their original ROMS or restoring them, please follow the tutorials in this thread:
Going back to stock TUTORIAL
Be helpful and provide your firmware if you have a backup so we can build a database for those who don't.
Be sure to report what is working and what is not working for you once you've tried the tutorials!
Unlike the 14 threads on these matter I take the responsibility as OP to upgrade my original post as firmwares and new info becomes available.
Let's create a focused troubleshooting and tutorial thread,
Thanks.
I'm rooted via gingerbreak and the update worked fine while still rooted. It did break root. Just had to re-apply gingerbreak and all is good, back to root with latest update.
gingerbreak worked with official 3.1 ?
it didn't work with 'leaked' 3.1 ?
OTA
Ok after long night and hours of research i found out a lot.
1 if you have modded ad hoc in wpa_supplicant file recover the original file
2 if you have modded the phone.apk and telephoneyprovider.apk to save battery this is the reason why you won't get the update.
i put these files back and instantly got an update, i mean the exact second i set those back
i can't believe this my updates keep failing to install. FING POS i tried everything, factory reset
i have tried everything, even factory reset, it fails while installing after reboot
acer support are a bunch of retards, they don't even know they sell tablets????????
need help i can't upgrade, it fails every time
does anyone know where the install logs are
the log is \cache\recovery\last-log
Oklahoma City, OK noon CST
First attempt failed:
Changed the wpa_supplicant back to original and all went smooth the second time
I never changed anything and it failed.
**Edit: I rebooted my devices and left it completely alone after unzip and it rebooted into recovery mode and seems to be installing **
I had the same problem, It was pretty disheartening.... but I unrooted my device, re-booted and tried again and SUCCESS!!!
But now I can't get it to re-root using gingerbreak... HELP!
SUCCESS!
Ok. I got OTA update 4.010.08 (122.71 MB) this morning. It failed.
So I unrooted my device. Re-started it and tried again... SUCCESS!
I tried using Gingerbreak to root it again. FAIL!
So I used this: http://forum.xda-developers.com/showthread.php?t=1138228
SUCCESS!
Hope this helps those of you who are having problems.
No need to unroot nor go to stock.
I had the same issues. Then I simply used Acer Recovery to install stock recovery and everything worked fine.
Ceger
Acer Recovery?
Did Acer Recovery come with the tablet?
I tried the update numerous times over the last 4 days. Most of the time the download would fail, which I put down to my slow internet connection and overloaded Acer servers. But about 5 times it would finish downloading and then error out on install with a message about the update being invalid. I tried rebooting several times during this process. I have never rooted the tablet and only have a few apps installed as it was a recent purchase.
Finally it worked when I ejected the external SD card and rebooted. It may be a coincidence, but anyone else who gets the "invalid update" warning during install on an unrooted device may wish to try this prior to the download/install.
Received the update notification this morning, happily started downloading and installation.
Like some out there, the tablet rebooted and it seemed to install but up to about 1/4 progress it froze with a central honeycomb logo with exclamation mark. Thought it was part of the process, left alone for an hour but nothing happened, hence rebooted with a notification of 'update failed'.
Searching through google and xda forum the last 2 hours -- have tried the unrooting the device, plugging in to power, removing sd card to no avail.
Someone has also suggested to restore wpa_supplicant file under system/bin. I don't remember altering the file at all, and when I check the file it is dated 29/3/2010... i bought my device in April, hence assuming it has not been altered either by myself or from any app. Like wise for the telephony files as well, as I haven't changed anything to try to stop the cell standby issue to improve battery life.
I am left with no options unless someone has a better idea. I have not uninstalled any pre-loaded apps. Rooted with Gingerbread (and as I said tried unrooted and re-rooted without success in updating).
Thoughts?
Current build:
Android version 3.0.1
Kernel 2.6.36.3
Build no. Acer_A500_1.139.04_COM_GEN1
Failed system update to 4.010.24
I am located in Melbourne, Australia.
(Last thing would be to download the actual rom and update via CWM.)
open /cache/recovery/last_log on your tablet use root explorer
ypu will know whats wrong
I'm in Melb too, and that particular update has failed to download about 5 times now, and when it finally downloaded, it came up with a message saying "update invalid" or something along those lines. I'm gonna wait til I get home to try and update again.
altering WPA_Supplicant file is something you would've done so your tab would connect to ad hoc networks. Must be something else.. did you alter any other files? I'm working on this same issue. frustrating as f*#%
I was running stock rooted 3.01 and was failing updates over and over until I flashed back to the stock recovery using the Acer recovery apk. As soon as I did that and tried the ota update again it worked right away... once 3.1 was installed I rerooted using iconia root 2.1 and flashed cwrecovery back to tablet... let me know if this helped
acorsino said:
I was running stock rooted 3.01 and was failing updates over and over until I flashed back to the stock recovery using the Acer recovery apk. As soon as I did that and tried the ota update again it worked right away... once 3.1 was installed I rerooted using iconia root 2.1 and flashed cwrecovery back to tablet... let me know if this helped
Click to expand...
Click to collapse
Same for me. Had to go back to stock recovery for the OTA update to work.
Mine failed the first time. I rebooted and it worked the second time.
I tried using Acer Recovery Installer 1.5, checking Stock USA 1.141.07_COM_GEN1 and touched "install recovery image", rebooted, and nothing happened?
My build number remains 1.139.04_COM_GEN1
I am sure I have missed something...
Tried downloading and installing the 5th time, still failed and stuck at the same progress bar of 1/4 followed by that annoying honeycomb with exclamation mark logo.
mashilu said:
I tried using Acer Recovery Installer 1.5, checking Stock USA 1.141.07_COM_GEN1 and touched "install recovery image", rebooted, and nothing happened?
My build number remains 1.139.04_COM_GEN1
I am sure I have missed something...
Tried downloading and installing the 5th time, still failed and stuck at the same progress bar of 1/4 followed by that annoying honeycomb with exclamation mark logo.
Click to expand...
Click to collapse
If you see the little bee fail screen, it is not the stock recovery, but still CWM.
mashilu said:
Received the update notification this morning, happily started downloading and installation.
Like some out there, the tablet rebooted and it seemed to install but up to about 1/4 progress it froze with a central honeycomb logo with exclamation mark. Thought it was part of the process, left alone for an hour but nothing happened, hence rebooted with a notification of 'update failed'.
Searching through google and xda forum the last 2 hours -- have tried the unrooting the device, plugging in to power, removing sd card to no avail.
Someone has also suggested to restore wpa_supplicant file under system/bin. I don't remember altering the file at all, and when I check the file it is dated 29/3/2010... i bought my device in April, hence assuming it has not been altered either by myself or from any app. Like wise for the telephony files as well, as I haven't changed anything to try to stop the cell standby issue to improve battery life.
I am left with no options unless someone has a better idea. I have not uninstalled any pre-loaded apps. Rooted with Gingerbread (and as I said tried unrooted and re-rooted without success in updating).
Thoughts?
Current build:
Android version 3.0.1
Kernel 2.6.36.3
Build no. Acer_A500_1.139.04_COM_GEN1
Failed system update to 4.010.24
I am located in Melbourne, Australia.
(Last thing would be to download the actual rom and update via CWM.)
Click to expand...
Click to collapse
Hi .. try to do that...
the uploaded file helped and solved my issue..i'm now running Honeycomb 3.1
Solution posted by Bob here: (correct the link below "www")
w w w.androidtablets.net/forum/acer-iconia-tab-a500-forum/18444-update-failed-help.html
Here's the WPA_Supplicant from my A500, after the 3.1 update. Hope this works for you guys.
I'm not sure what the extension is for the A500, but I had to add .zip to be able to upload it. Try removing the .zip before using it. Also, remove the 'original'. I added that to keep it straight on my tablet.
Good Luck.
Bob
p.s: sorry i'm a newbie here and can't post link outside the forum at the moment..
just follow the steps described by Bob!
I did see that different logo, which I subsequently rebooted as I thought it's frozen again.
Interestingly, I tried to push for another system update, attempt no. 7, and now, it progresses and complete update!!! Woo hoo!
Thanks for all the help. I still don't know which one sorts what out though... Cheers!
Took an OTA update this AM in the US, but nothing seemed to change. Switched back to stock recovery, took update, downloaded, installed (no errors), rebooted, message said somethings about a Pre-Install APK, then nothing. Tablet info says I am now up to date, but nothing else seems to have changed.
I'm still on custom kernel (thor's), still on 3.1. I forget the GEN info, but I don't think that changed either.
Was this a pre-update update?
I got the update too.
Seemed to freeze up on me after installing (Gave it about 15 minutes on a black screen after installing, before I gave up). I had to power it off and back on. After booting, I got a message that the "Update Was Successful"
Kernal Number is: 2.6.36.3
Build is 4.010.13_COM_GEN2
But still Android 3.1
Ditto. Used stock recovery and unroot to get it to install. It's Gen 2.
Sent from my ADR6300 using XDA App
Same here, updated with no errors. Didn't lose root and it still says 3.1
With the update to 3.1 they sent out a smaller update a few days earlier. This one may be the same thing.
It's just a small update, about less than 20MB download. But I have no idea what's been changed.
GShyneDM said:
I got the update too.Same thing happaned to me
Seemed to freeze up on me after installing (Gave it about 15 minutes on a black screen after installing, before I gave up). I had to power it off and back on. After booting, I got a message that the "Update Was Successful"
Kernal Number is: 2.6.36.3
Build is 4.010.13_COM_GEN2
But still Android 3.1
Click to expand...
Click to collapse
Same thing happened to me...
System Update
System Update 4.010.13
(14.49MB).
A new system update is available for your device. A network connection is required to download and update your device. You may incur additional charges from your service provider. Thank you for not replacing me with the HP TouchPad.
Click to expand...
Click to collapse
i'm gonna hold off on installing this until i know more of what its all about...
I uploaded the zip in development, I don't think I'm gonna install either...
I also installed the 14MB update today. The tablet was rooted, but otherwise stock. After the update the tablet remains rooted. I have experienced no other issues.
Cheers,
A
I had the same experience as above. So far no issues.
This actually made me worried about the possibility of us to get an update to 3.2 on 8/25. Otherwise, they should just pass this incremental.
I just purchased the A500 and have successfully updated 7.014.01 and then when I try and update to 7.014.02 I get Update Failed message. Anyone have any ideas as to how to fix it? Tech Support recommends that I send it back, but it will take 2-3 weeks and it will be a royal pain and will be my last resort.
sonjamin said:
I just purchased the A500 and have successfully updated 7.014.01 and then when I try and update to 7.014.02 I get Update Failed message. Anyone have any ideas as to how to fix it? Tech Support recommends that I send it back, but it will take 2-3 weeks and it will be a royal pain and will be my last resort.
Click to expand...
Click to collapse
I'll assume this is the 3.2.1 update as it usually comes in 2 update files.
I'll guess your 2nd update download was corrupted somehow. Probably a good thing, as some people had bricked tab's as a result of a failed update.
If your tab runs fine, don't worry about it, and ignore the update. They'll probably just give you another tab, and you'll go through the same thing again.
Not really a whole lot in the 3.2.1 update anyhow. Only thing I noticed, is a slight difference in screen sensitivity and just a touch smoother in the app drawer. Other than that, no other real performance gains.
In a few months, they'll push the ICS update. So it will all be moot.
But, if you really want to do this small update, you'll have to root, install CWM recovery, then flash a rooted update manually. I think TimmyDean posted these awhile back, but not sure.
Or, you can just flash a 3.2.1 custom rom.
But if your tab runs ok, and you don;t want to come to the dark side, then forget about it and wait for ICS.
I successfully rooted my Tab from ICS to JB 4.1.2 a few days ago and it has been working fine. It suddenly froze in GMail app this evening. Held down power and attempted reboot. All fine until several revs of the CyanogenMod circle then it froze for a few seconds and then blank screened and rebooted with the Samsung Galaxy Tab 10.1 logo before going back to the CyanogenMod circle. Only stops the looping if I power from the mains. Battery is at about 55% and charging.
I have CWM-based Recovery v6.0.1.5 and I installed JB from cm-10-20121112-EXPERIMENTAL-p4wifi.zip
Can anyone help? I'm new to rooting etc..
Many thanks,
Stuart
Try booting into recovery and doing a full wipe of everything.
Sent From My GalaxyClass StarShip
Thanks
SouthPhilly said:
Try booting into recovery and doing a full wipe of everything.
Sent From My GalaxyClass StarShip
Click to expand...
Click to collapse
Many thanks for the reply SouthPhilly. It didn't work
There seemed to be a problem with formating /data. It just stopped when I tried it. Also stopped if I tried restore. The good news is that I did eventually overcome the problem by following qbking77's excellent info on
How to Unroot / Unbrick the Samsung Galaxy Tab 10.1 - Latest at www dot youtube dot com/watch?v=KYBs98R9rTs with file info at
www dot qbking77 dot com/samsung-galaxy-tab-1012.html
which results in a stock original unrooted GT-7510. From there I rooted back into CWM recovery and reflashed CM10 so I'm back with a working version of 4.1.2
I hope this info may help others unfortunate enough to get stuck like me.
I'm now happy again.
Best wishes to all.
Stuart G3SNA (QTHR)
Well perhaps not quite so happy!
For some strange reason I could not get the USB port to work. It did with my first attempt at flashing to CM 10 - JB 4.1.2 days ago but not now. I have tried all ways several times so eventually I returned to the qbking77 version of the stock 3.2, copied my CWM backups back to the sdcard, then reinstalled CWM recovery and restored from the backup. I now have what appears to be a fully working tab with USB connectivity running 4.0.4 ICS again. I'll stay with this untill JB gets a bit more stable. You never know, pink pigs may fly and Samsung may issue an OTA update :laugh:
Why didn't you flash a nightly instead of a ROM thats dated last month? The latest one runs fine on my p7510
http://get.cm/?device=p4wifi
Sent from my GT-I9100
I didn't know where to find the nightly files when I first did the root and rom flash. I just followed the links I could find using google. The whole thing looked good to start with and I ran it for the best part of a week before it froze up on me. I learned a lot in the last few days and now feel confident in what I'm doing. I did download last night's nightly this morning and flashed the rom. When I connected the usb cable to my pc failed to connect so I reverted to my original zip file thinking the nightly had an issue. Low and behold the usb cable connection failed with this as well. In both cases I did all the wipes and formats just like the first time. After that I gave up and decided to try to put my Tab back to ICS using the CWM backup I made as recommended before I started the first time. I'm no novice as far as computing is concerned but I haven't rooted an android device before.
If you take a look around the forums here you will find I am not the first to fail to find the nightly files. Perhaps a sticky with the link would be useful?