Database Users

Don't carry in your back pocket... I've now got a damaged screen

not broken, just damaged - when the screen is off I've now got a multicoloured rainbow oil-slick effect along a strip about .5cm by 3cm vertically down the middle of my device which is particularly visible when you can see the reflection of light onto the screen (like the sky). Not quite as bad when the screen is lit (but of course still evident with the black homescreen background).
I think i did it by having it in the back pocket of my jeans while driving (never seemed to be a problem sitting on sofa's etc but i guess car seats are a bit firmer. Bummer. Side pocket from now on.
edit. To clarify, I'm not moaning, just saying...

You'd be insane to carry anything in your back pocket anyway, least of all a potentially €700 device... pickpockets love ass...pockets

You're in the habit of sitting on your mobile phones?

I feel for you I did the same with my sony X1

haha why did you have it there? Don't fick any phone made for that

Hahah reminds me of a past friend who went through 4 2nd gen. iPod Nanos because she sat on 'em.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not even the side pocket is safe. Try the shirt pocket or just holding it when you walk (gets you the most awesome stares when shopping). I do it with my X1 all the time. There is a post about how the X1 gains this dude quite alot of attention, I can say I have had a taste of that too, but only by holding!
Edit, Here is the thread:
X1 A Bigger Flaunt Than iPhone

Seems to be a lot of people who do stupid things with their phones around here. And no one has insurance on them either...really guys. You should know better.

wilbur said:
not broken, just damaged - when the screen is off I've now got a multicoloured rainbow oil-slick effect along a strip about .5cm by 3cm vertically down the middle of my device which is particularly visible when you can see the reflection of light onto the screen (like the sky). Not quite as bad when the screen is lit (but of course still evident with the black homescreen background).
I think i did it by having it in the back pocket of my jeans while driving (never seemed to be a problem sitting on sofa's etc but i guess car seats are a bit firmer. Bummer. Side pocket from now on.
Click to expand...
Click to collapse
Hah, the same thing happend to my Blackstone after I put some protection film on the screen. I could'nt use the phone more after that as the screen got way less sensitive and did'nt respond normally. So I had to upgrade to a Leo
Too bad though that the same thing can happen on Leo, I was hoping that they had fixed that "disease"..

madindehead said:
Seems to be a lot of people who do stupid things with their phones around here. And no one has insurance on them either...really guys. You should know better.
Click to expand...
Click to collapse
thanks for the support!
i recognise it is my own fault - but I have been carrying giant handsets around since my ipaq and SPV M1000 and this is the first time I have had this error. I usually carry it in my side pocket, not quite sure why it ended up in the back one - probably shoved it in while manhandling two kids.... hey ho.
On the bright side <trying very hard to search for a bright side> i'll have to upgrade sooner to a nice HTC Bravo....

sitting on ur hd2, what a clever idea... sorry, but and the beginning it says PLEASE DO NOT USE EXAGGERATED PRESSURE ON THE SCREEN (or sort of) the body may be an example from now

wazaaappp said:
it says PLEASE DO NOT USE EXAGGERATED PRESSURE ON THE SCREEN (or sort of)
Click to expand...
Click to collapse
Close, the actual text is "Do not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down."

I always put mine in my left pants front pocket. Never had a problem but if a devise it too large, it's not very pretty.

I also find putting this on the front shirt pocket a little risky as it tends to drop out when I bent over. Too bad there are no cases with a belt clip for this at the moment.

kensong said:
I also find putting this on the front shirt pocket a little risky as it tends to drop out when I bent over. Too bad there are no cases with a belt clip for this at the moment.
Click to expand...
Click to collapse
there is belt clip cases... i just bought one of these http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310183726679&ssPageName=STRK:MEWNX:IT
and waiting for it to arrive..

Wilbur,
Long shot this but it's a method I have used before.
Get yourself a very soft and clean old handkerchief.
Next put a little washing up liquid in a small cereal bowl of warm water.
Now dip a corner of the handkerchief into the mixture; make sure the cloth is damp, NOT WET.
With the device switched off wipe the screen in vertical swipes from top to bottom with the damp part of the handkerchief.
Once you have completed this get another dry, soft clean handkerchief and using the same vertical movements polish the screen. Make sure you don't have any grit under the handkerchief. Also make sure that your handkerchiefs are as old as possible as they tend to be at their softest then,
Once done switch on your device again and see if the screen is clear.
Has worked for me but no guarantees. Worth a try though.
Cheers
WB

wilbur said:
not broken, just damaged - when the screen is off I've now got a multicoloured rainbow oil-slick effect along a strip about .5cm by 3cm vertically down the middle of my device which is particularly visible when you can see the reflection of light onto the screen (like the sky). Not quite as bad when the screen is lit (but of course still evident with the black homescreen background).
I think i did it by having it in the back pocket of my jeans while driving (never seemed to be a problem sitting on sofa's etc but i guess car seats are a bit firmer. Bummer. Side pocket from now on.
Click to expand...
Click to collapse
I'm sorry for your loss...
But at least you didn't break it making love to it as some other guy on here did!
Oh, I know he SAID he broke it when he 'accidentally' put his hand on it after dropping it in his bed when he went to switch off the alarm in the morning...
But we all know what really happened... ;-)

Isadora said:
Close, the actual text is "Do not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down."
Click to expand...
Click to collapse
+1, most people just probabaly ripped this off without paying any attention to play with their new toy

wilbur said:
not broken, just damaged - when the screen is off I've now got a multicoloured rainbow oil-slick effect along a strip about .5cm by 3cm vertically down the middle of my device which is particularly visible when you can see the reflection of light onto the screen (like the sky). Not quite as bad when the screen is lit (but of course still evident with the black homescreen background).
I think i did it by having it in the back pocket of my jeans while driving (never seemed to be a problem sitting on sofa's etc but i guess car seats are a bit firmer. Bummer. Side pocket from now on.
Click to expand...
Click to collapse
I'm not being funny but anyone who keeps a phone like this in their back pocket shouldn't be surprised or moan if it gets damaged. One of the unavoidable side effects is that all of your upper body weight is pressing down on the phone when you're sitting down. I have never kept any phone in my back pockets, and that includes work ones I don't care a toss about.
Bad luck but a lesson learned and all that.

Pagnell said:
I'm not being funny but anyone who keeps a phone like this in their back pocket shouldn't be surprised or moan if it gets damaged.
Bad luck but a lesson learned and all that.
Click to expand...
Click to collapse
Indeed. I'm not moaning. More "cautionary tale". Schadenfreude for all the hard-working devs...
wacky.banana said:
Wilbur,
Long shot this but it's a method I have used before.
Get yourself a very soft and clean old handkerchief.
Next put a little washing up liquid in a small cereal bowl of warm water.
Now dip a corner of the handkerchief into the mixture; make sure the cloth is damp, NOT WET.
With the device switched off wipe the screen in vertical swipes from top to bottom with the damp part of the handkerchief.
Once you have completed this get another dry, soft clean handkerchief and using the same vertical movements polish the screen. Make sure you don't have any grit under the handkerchief. Also make sure that your handkerchiefs are as old as possible as they tend to be at their softest then,
Once done switch on your device again and see if the screen is clear.
Has worked for me but no guarantees. Worth a try though.
Cheers
WB
Click to expand...
Click to collapse
Thanks - I'll try it anyway, but the rainbow/oil effect appears to be beneath the glass screen.

I would think it goes without saying to not sit on your phone, no matter what surface you might be sitting upon...I don't know anyone with an absorbent enough butt that can pull that off safely. It's one thing to carry it carefully there, or better yet in your front pocket temporarily but to sit on your phone!?!

official acer case pictures

it fits perfectly and feels good
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my PC36100 using XDA App

link? price?

kmetek said:
link? price?
Click to expand...
Click to collapse
I got mine in Wisconsin at Staples store for $40. Or you could order form staples.com
Sent from my PC36100 using XDA App

I have the case. Not super crazy about it, but better than the tablet being it's naked slippery self. Tight fit getting it on or off, but still slips in the case just a tiny bit in use. The slipping causes things like the front facing web cam will not be aligned it its port.
The actual opening to get the tablet inside is at the bottom of the case when the cover is open in "stand mode" so that can allow the above mentioned slipping also.
The stand function is passable, but I think the angle it creates is a bit too shallow and causes the screen to catch glare from overhead lights. I would like if it stood the tablet a little more upright to escape that glare.
I've seen a very similar case for the iPad series, so we are not alone.
So, not perfect, but better than nothing.

isn't it the same thing like the official ipad 1 case last year

timehunter said:
So, not perfect, but better than nothing.
Click to expand...
Click to collapse
Agreed. I kinda like mine but would really prefer a slim well fitting leather folio. One nice feature of the case is it doesn't weigh much, so your tablet still feels very light in your hand, which is never the situation with a leather case.
The stand angle is definitely crap though - if I set it on my desk at work it invariably reflects the overhead lights into my eyes. The ability to adjust it even slightly would make that easier.
And agreed - the tablet sure moves around inside the case a lot considering how tight it fits.

the stand position is actually pretty nice for me. i use it at my desk at home (with lamp light, no overhead) so thats probably why i like it. but the only thing i dont like is the cheaply velcro used (seems to undo to easily, i would prefer magnets like a cell phone case) and the slipping out during use. other than that i like it

I've got one of these too, and I noticed that if the slightest bit of anything gets on it, it looks ugly. It was on a table when a bottle of soda got spilled, only a few drops hit it, and you can see exactly where those drops hit it at.
As far as the case goes, it would be a lot better if the flap was magnetic, and if there was something for it to catch on on the back when it's flat. It's obnoxious to have to deal with putting it into the stand shape when you're just holding it to check your e-mail.

netham45 said:
I've got one of these too, and I noticed that if the slightest bit of anything gets on it, it looks ugly. It was on a table when a bottle of soda got spilled, only a few drops hit it, and you can see exactly where those drops hit it at.
As far as the case goes, it would be a lot better if the flap was magnetic, and if there was something for it to catch on on the back when it's flat. It's obnoxious to have to deal with putting it into the stand shape when you're just holding it to check your e-mail.
Click to expand...
Click to collapse
At least the case did its job and protected the tablet from your soda damage. Also, the case cleans pretty easily with a damp cloth.
Sent from my A500 using Tapatalk

I have had the Acer case for a couple of weeks. It feels like wetsuit material. but does the job, and it is easy to wipe any dirt off it. I did cut a inverted 'V' so that the microphone was not obstructed.
All the ports are easy to get to but, nevertheless, exposed. So, I wanted a sleeve that I could slip the tablet into when placing it in my briefcase, and I found the attached at a store that sells Japanese goods (the case is actually from China.) See attached photo.
This fits the A500 in the Acer case very nicely, and good enough to take into a meeting.
The cost of the case: $1.50.
ps. The store is Daiso Japan and the item is Plastic Case (B5) 497 990 9845 486. Nothing unique about it and I am sure you can find similar ones around from other stores.

I bought this case and am not too thrilled about it. I already have an Arkon stand so the built-in stand function is kind of useless, and really just makes that side of the cover really flimsy. The case attracts too much "stuff" and degrades the look of the product and it doesnt fit like a glove as you'd think. I also dont like how it doesnt cover up the bottom of the A500 at all, nor the fact that if you dont use the stand fuction, the tablet has a tendency to fall out of the case, since its on "backwards."
that... and the smell... ugh.

Amazon has it on sale today for 29 bucks
http://www.amazon.com/Acer-Iconia-A...14JA/ref=sr_1_2?ie=UTF8&qid=1307123390&sr=8-2

second that on the smell i bought a 10 inch netbook bag today to replace the case

I have the official case and am about to ditch it for a folio style from ebay.
Not only does it look tatty when it is on, it's almost impossible to clean the screen with it on, as all the dust etc collects in the corners, and constant removal and replacement has stretched the opening so I now have the dreaded 'slide' effect.
In addition to this, obviously something abrasive has got between the screen and the case (still waiting for my screen protector to arrive) and put a tiny gouge in the screen on the black bezel near the docking connector - rather knocking on the head the assertion that this is covered in 'Gorilla Glass'.
And lets be honest, the Iconia is a beautiful looking bit of kit, and putting it in the official case makes it look rubbish.
In all, 30 quid wasted!

This case is pretty much garbage. I've had it as long as it's been out and here's the low-down...
When you get it, it reeks. I thought that the shipment of cases was accidentally dropped in a puddle of gasoline. But it turned out that was just from the material the case was made of. It did go away eventually though. It took about 30-40 days but now my case is reek-free.
The second problem was the slip issue. The tab slides down at about 3-4mm, which may not seem like a lot, but it's actually the perfect annoying amount. It causes the front camera to be blocked by the case itself, the speakers to not line up correctly, the bottom part of the front side of the case comes close to blocking you from using the task bar buttons efficiently, and the ambient light sensor is blocked. Some members on here have recommended double sided tape, but don't waste your time. It just slows the slipping down and it doesn't stick to well to the case material. Now I have an entire roll of Scotch double-sided tape that I will never use. However, I have found great success with heavy duty Velcro. I bought a pack with two strips from Staples and used half of one of the strips, cut into 2 and popped them on either side of the Acer logo on the back of the unit. It holds okay with the case material, creates just enough wedge pressure in the back, while allowing you to take the tablet out of the case if you really want to. My front camera and taskbar buttons have not been blocked at all since implementing this Velcro. One user here mentioned that they did some sewing and sewed the unit into the case at the opening and that works well. If my Velcro doesn't work as a more subtle solution long-term, I may go in that direction. I can't help but wonder if the case was made upside-down, would we have the slip problems at all (the opening is at the bottom when you hold it naturally).
The best thing about this case, though (and why I keep bothering to attempt to fix it) is that I love its stand features. The stand on the back is nice, and frankly, better than some of those ugly alternative bulky stands out there. I can stand it up on the table while sitting and eating, or flip it upside down and use the slighter stand to ramp it up just enough while laying down in bed.
Sent from my A500 using XDA Premium App

I bought this case a while back and have not had any problems with it. It's easy to clean with a damp cloth, and protects my tablet. I have not had any issues with my tablet slipping yet. The stand also seems to be stable enough for me. The one thing I did do though was remove the Velcro and glue two tiny rare earth magnets in their place. Now the case snaps shut and stays shut. I wish I could add one more magnet to keep the cover open when holding the tablet.

ReganH22 said:
I bought this case a while back and have not had any problems with it. It's easy to clean with a damp cloth, and protects my tablet. I have not had any issues with my tablet slipping yet. The stand also seems to be stable enough for me. The one thing I did do though was remove the Velcro and glue two tiny rare earth magnets in their place. Now the case snaps shut and stays shut. I wish I could add one more magnet to keep the cover open when holding the tablet.
Click to expand...
Click to collapse
Since implementing the Velcro solution mentioned in my previous post, no interference from slipping! Recommend!

Yeah I might try the Velcro if I start having problems with it slipping.

[MOD] Chrome Look/Mirror Polished Transformer Bezel

Ok, so I let my brother borrow my Transformer to take with him as he spent the week at my mom's house. I should have known better...
Apparently my nephew dropped it, which caused an ugly dent directly on the corner of the bezel; in addition, one of the edges also developed a sizeable gap between the glass and the bezel that extended halfway across the tablet.
I decided to make a positive into a negative- I tore down the transformer, manipulated the bezel to be bent back into place (as close as I could get it), then polished it all the way around.
All in all, it was pretty simple - After tearing the TF apart, I just soaked the bezel in Greased Lightning for about 10 min to remove the anodization; then, I sanded it smooth using a combination of wet-sandpapers (800 Grit for the real rough spots, and a combination of 1000, 1500, 2000, and 3000 grit wet sanding paper); finally, I buffed it out using a cotton buff wheel on my dremel with Turtle Wax rubbing compound.
Credit goes to:
WhiteSites for the inspiration from his work on the Sensation 4G
http://forum.xda-developers.com/showthread.php?t=1184568
Below are some pics of the process and the results:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finished Transformer Front Screen Side
Transformer Bezel de-anodized HDMI Side
Transformer Bezel being de-anodized
Transformer Bezel being de-anodized 2
Transformer Bezel being de-anodized 3
Transformer Bezel being de-anodized 4
After rinsing with Vinegar to neutralize the acid, I let it sit and soak in a soap bucket for a couple of minutes
Transformer Bezel Hanging for Rinse
Finished Transformer Dock Side
Transformer Corner Beginning Sanding
Transformer Corner Sanding
Transformer Corner Sanding 2
Transformer next to iPad
Finished Transformer Back cover and sides
Finished Transformer pwr and volume
Finished Transformer top blank side
Finished Transformer HDMI Side
Finished Transformer Corner
Finished Transformer Corner Edge
Finished Transformer Corner Direct View

looks purty. you don't have a matching dock?
Sent from my Transformer TF101 using Tapatalk

I can't imagine how much work would have to go into making the dock match the bezel like that. Personally I would be too afraid of breaking the keys on the keyboard during the removal process.

looks damn good. I was debating on doing a flat/matte/satin black thing with the bezel not too long ago.
just brought it back

finalhit said:
looks purty. you don't have a matching dock?
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Nah, I have the dock but have not journeyed that far yet. Who knows I may end up Modding it to match.
Sent from my Transformer TF101 using Tapatalk

I did end up Modding the dock to match the mirrored look
Sent from my SGH-T989 using Tapatalk

so uh... when are you going to polish my bezel?
that sounds dirty

dbiggss said:
I did end up Modding the dock to match the mirrored look
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Got pics? I'd love to see that, though I'd be too terribly frightened to attempt it on my own TF.

jordanjay29 said:
Got pics? I'd love to see that, though I'd be too terribly frightened to attempt it on my own TF.
Click to expand...
Click to collapse
+ 1 on that!

Here it go snapped a couple of quick pics for ya.
Sent from my SGH-T989 using Tapatalk

That is beyond awesome. I've never really liked the color of the transformer, it's just so boring and uninspiring. This may be what causes me to void my warranty (The guys at my local Asus shop don't care that I rooted my transformer. When I returned it for a defect I even booted it up with the custom boot screen and told them I put an overseas version of the rom on it). I am definitely going to do this.
A couple of requests/questions:
1) Can we get some more higher quality or close-up pictures of the final product? I really want a better look at the back of it to see the contrast between the bezel and the back plate. Also of hinge, and well everything. The more pictures the better. I'm especially interested in pictures showing the contrast between the bezel/dock and the other parts of the transformer.
2) Also looks like you didn't do the hinge, right? Haven't taken mine apart yet, it's on my to do list, so I guessing that part may not be possible to do or really difficult.
3) What is greased lightning? I'm in China now, so I can't buy American brand names anymore. I know heavy duty cleaning product. But is it like for household or industrial use? I think I saw it once in autoparts store. I'm guessing it's like that purple power stuff I used to use to clean my motor and rims on my car. Had to wear thick gloves to keep it from messing up my hands.
4) Is sanding it necessary? Mine is undamaged and I'd like to keep it that way. I'm guessing the bezel is pretty thin and during sanding could easily be damaged. It looks like you just sanded out the damage that had occurred when it was dropped.
5) How did the key removal process go?
Once, again thank you. This is a totally awesome idea. I've got me some new Chinese words to learn so I can go buy the materials to make this happen.

I am glad that's you are interested! I will post more info tommorow and answer the questions that you have.
Sent from my Transformer TF101 using Tapatalk

typci said:
That is beyond awesome. I've never really liked the color of the transformer, it's just so boring and uninspiring. This may be what causes me to void my warranty (The guys at my local Asus shop don't care that I rooted my transformer. When I returned it for a defect I even booted it up with the custom boot screen and told them I put an overseas version of the rom on it). I am definitely going to do this.
A couple of requests/questions:
1) Can we get some more higher quality or close-up pictures of the final product? I really want a better look at the back of it to see the contrast between the bezel and the back plate. Also of hinge, and well everything. The more pictures the better. I'm especially interested in pictures showing the contrast between the bezel/dock and the other parts of the transformer.
2) Also looks like you didn't do the hinge, right? Haven't taken mine apart yet, it's on my to do list, so I guessing that part may not be possible to do or really difficult.
3) What is greased lightning? I'm in China now, so I can't buy American brand names anymore. I know heavy duty cleaning product. But is it like for household or industrial use? I think I saw it once in autoparts store. I'm guessing it's like that purple power stuff I used to use to clean my motor and rims on my car. Had to wear thick gloves to keep it from messing up my hands.
4) Is sanding it necessary? Mine is undamaged and I'd like to keep it that way. I'm guessing the bezel is pretty thin and during sanding could easily be damaged. It looks like you just sanded out the damage that had occurred when it was dropped.
5) How did the key removal process go?
Once, again thank you. This is a totally awesome idea. I've got me some new Chinese words to learn so I can go buy the materials to make this happen.
Click to expand...
Click to collapse
Sorry about the delay, I have been crazy busy lately. I havent had the opportunity to take any new pics yet.
To answer your questions in the meantime:
2). Your correct, I did not do the hinge. However, I am sure that it would be possible to polish that part also -- and I dont think that it would be very difficult at all. The only reason that I didn't go that far is because of time... My plan was/is to sell the transformer+dock together to offset some costs towards getting the Prime... It just got to the point that It seemed like any more time that I would sink into it wouldn't benefit me because I am going to sell it and I figured that it wouldnt get me any more $$$.
3). Your right on the track! Greased Lightning is very similar to Purple Power. As a matter of fact, I ran out of Greased lightning and I actually had to use Purple Power for the Dock.
The Greased Lightning worked better, but I am not sure if the Anodization was just more stubborn on the dock.
The MAIN INGREDIENT that needs to be in the cleaner is "SODIUM HYDROXIDE", which removes the anodization. It is commonly found in oven cleaners, such as "EZ OFF". I did use gloves and took the pictures from my phone during the process which is the reason I don't have more of them-- it became a pain, going back and forth cleaning my hands, taking off gloves, taking pics, etc...
When the anodization was removed I also rinsed the pieces with vinegar and lemon juice briefly to neutralize the acid before rinsing in water w/soap.
4). The sanding is necessary if you are looking for the mirror finish - it really depends on how far you want to go with it. I sanded the entire thing. The keyboard ended up being a real ***** because (and again, im not sure if it is because I used Purple Power instead of Greased Lightning for that part), the anodization did not come off 100% on the dock part with just the cleaner.
5). Although it was a bit tricky, the key removal process wasn't too bad, but it of course requires patience and its important to be careful. The keyboard is glued to the palmrest (top) portion of the dock and the board and everything else is screwed to the base of the dock.
After removing the screws (2 only under the back feet) under the feet I used a guitar pick to carefully unlatch/separate the dock - starting from the back.
After the dock was opened, the keyboard was attached to the board by a ribbon cable that looks the same as you would expect on a standard laptop keyboard. I attempted to raise the lock lever to release the keyboard ribbon connector, but it seemed like it was glued or stationary, so I decided to leave it alone to avoid breaking anything. ---As I was separating the keyboard from the palmrest, the ribbon cable slipped out, but I was able to finesse it back in without messing with the lock/latch and it works fine.
At this point, I went back to using the guitar pick to gently finesse the keyboard away from the palmrest portion that was to be polished. The two are attached with a fairly strong adhesive and just require patience. I used a heatgun during the process, but it didn't seem to really help at all anyways.
---From their on, I polished it, used superglue to reattach the palmrest to the keyboard, reassembled everything and I was good to go!
Sent from my Transformer TF101 using Tapatalk

Really slick job! I like it a lot.

Thanks. It's freezing cold here and raining everyday for the next week, so not great weather to ride my motorcycle in to say the least. When the weather improves a bit, I'll begin my journey to find the materials I need. Thanks.
Also, you said "sodium hydroxide" (NaOH) was the key ingredient? That's lye, the main ingredient in drain cleaners, and an insanely strong base. Which means a drain cleaner may also be usable. I know where to get some drain cleaner, that I think is mostly NaOH with some thickeners mixed in. Also it's safe to use on metal so I won't have to worry about it damaging the bezel. I'm a chemist by trade so I think I maybe able to find a substitute for the the greased lightning. Also with what you said about the purple power not being strong enough, I can control the strength of the solution if I start with a concentrated NaOH solution. That'll be a lot easier to find than an industrial degreaser. Finding things in China can be a real pain sometime.

Try looking up the MSDS on Greased Lightning, I believe it gives the concentration of NaOH used.
What grit sandpaper would you stop at if you were going for a brushed metal look?

2000 wet or dry should work great for polishing. Stopping at 800 would give a rougher surface. If you want a true "brushed" look, try getting up to 2000 grit and neatly wipe the parts with a Scotch Brite pad. As far as de-anodizing I have used Easy off oven cleaner (the lethal yellow can) to remove it in the past. It works great, just let the parts sit in the warm sun for about 30 minutes before spraying the Easy Off on them.
Also, when your done polishing the parts, you can clear coat them to keep the shine indefinitely.
sent from my ASUS Transformer running Prime 2.1.1 using Tapatalk

JoshX said:
Try looking up the MSDS on Greased Lightning, I believe it gives the concentration of NaOH used.
What grit sandpaper would you stop at if you were going for a brushed metal look?
Click to expand...
Click to collapse
2000 would be good, but I am fanatical about the 3M 3000 grit sheets. they are like $6 at autozone or an automotive supply store and are designed with a sponge like back layer, so its not just regular paper.

Where do i call to get this help
Very good! doesnt seems like u even dropped it (ur son/brother)

dbiggss said:
2000 would be good, but I am fanatical about the 3M 3000 grit sheets. they are like $6 at autozone or an automotive supply store and are designed with a sponge like back layer, so its not just regular paper.
Click to expand...
Click to collapse
Awesome! I'll try the 3000. Do you have any suggestions on a brand of clear coat to use?

[HOW TO] Nexus 4 replacing just back door glass lens. (DIY Ghetto Style)

Disclaimer: Read this thread completely before doing anything. I'm NOT responsible for any damage done to your device while doing this. DO IT ON YOUR OWN RISK. I'M ALSO NOT SURE IF THIS VOIDS YOUR WARRANTY OR NOT.
Hello everyone,
Like many of you, I ended up breaking my back glass of new Nexus 4. But being from India finding a replacement wasn't easy and if it was possible it wasn't cheap at all. So I did loads research and found just back glass lens only for cheap ($25 to India from China with free shipping) delivery time was fast got it within 10 days. I thought its cheap so its worth taking a risk. I was unable to find any guide online to replace just glass so I thought I'll make one here to help others out.
Requirement:
Back glass lens only replacement.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
T5 screw driver and few other tools to remove glass from back (As shown in picture below)
Adhesives remover, I used nail polish remover as I had nothing else and at least for me it worked well.
Adhesives to stick new glass on back, I used SYNTHETIC RUBBER BASED ADHESIVE as I had nothing else. But I suggest find something better than this.
Cover yourself properly(full pants, full sleeves shirt or tshirt, glooves, piece of cloth to cover your mouth and if possible eye gear too (You'll need this to protect yourself from small glass particles and glass dust) Basically cover yourself as much as you can, if you don't like to be in mess like me.
This is what removed glass looks like.
LEAST 2-3 HOURS of your time.
PS: You should do this in safe environment, glass is so thin while removing it can cause you serious harm(cuts, can fly into your eyes or mouth) It becomes powder form so if you're not careful you'll be left with glass dust all over you. Also Make sure NO children are around when you do this.
Lets get started.
1. You'll need to remove back door from nexus 4. You can either google how to do that or goto following link for xda guide
http://forum.xda-developers.com/showthread.php?t=2257896
2. Wireless charging coil and speaker grill is directly attached to glass. So you'll have to remove speaker grill first before removing glass from back and if possible charging coil too, if not you can remove it later like it did.
3. Now you can start removing glass out from where its broken or like me you can look under back door and you'll find 2 holes in upper part. Using something sharp punch through them. You can start from there then. Also make sure you don't use excessive force as plastic used in door is really weak, it can crack or break easily. So always support the part of door with finger from below while you're removing glass on top of it. This took me almost 1 and half hour to get this done. It will take time initially and will be hard but will get faster and easier as you'll get used to it. I removed glass from border of case and corners as it has somewhat plastic support below and left the glass on coil for last as its very delicate.
4. If you did as I did in pictures, you'll be left with charging coil and glass on it. I removed charging coil at this point from back door and removed glass really carefully. Removing glass from coil alone took me an hour. You can see some part of plastic protection of coil is removed while scrapping glass out, though I'm sure its still working fine, but still be really be careful while doing it. After done this is what you'll be left with.
5. Use Adhesives remover (in my case nail polish remover) to clean back door and charging coil. This is really important, as you need no residue left on it before putting new glass on. This is what it looked like after cleaning it.
6. After its all clean, Use Adhesive you chose and apply if on back door evenly and fit glass on it. if its rubber based like one i used let it dry for a bit before fitting glass on it. As rubber based ones takes time to dry. I did not apply adhesive on charging coil as some of its plastic protection was removed so I didn't wanted to take any chances. So I stick glass on back without charging coil and this is end result.
7. Now my back is ready, I stick speaker grill back on it and I just put charging coil on glass back without adhesive I didn't wanted it to be stuck with glass again as incase glass breaks again its pain in a** to remove it from glass. So i just place it in its place and put my phone back together again.
8. My phone is working perfectly fine now, fitting is not as original but that's cause of Adhesives I used. If you use better it will be just as brand new.
Below are few things you should keep in mind before doing this.
It took me least 3-4 hours to do this, was it all worth the pain? I was getting just a back without nfc and wireless charging for $75 shipped to India and original back door replacement with all equipment for $100+ neither were worth according to me and I didn't wanted to spend so much money on it either. I had back screen guard on when it fell, So all broken glass was behind guard and I further sealed it with clear tape so glass wasn't going anywhere and further it was in case. So no one could even see its broken. I fixed it cause I might be selling this phone to replace with Nexus 5 incase its worth an upgrade. Also I bought phone from USA as I was never gonna claim Warranty either so thinking if this will void warranty or not wasn't something I had to worry about. So making phone as good as new for $25 it was money well spent. Infact you can get this glass lens cheaper than what I spent depending on country you live it. Also there is risk to break the back door itself as its fragile. So please consider everything before you even try this. If you're careful enough I don't think you'll have problem doing this fix.
My phone is working perfectly fine now, tested everything besides wireless charging as I don't have wireless charger but nfc and all are working just fine.
I got my replacement from china and it came well packed thought should share with you guys incase you are wondering if its safe to get something so delicate from china.
If you have any questions feel free to ask. I'll try to help as much as I can. Hope this helpful to people. Good Luck with your repair
Arvin

Really useful. I do hope never to use it though btw how did u order it? I'm your neighbor from Pakistan, i might drop this thing like u unfortunately did. So was wanting to know that
Sent from my Nexus 4 using XDA Premium 4 mobile app

WasifSal said:
Really useful. I do hope never to use it though btw how did u order it? I'm your neighbor from Pakistan, i might drop this thing like u unfortunately did. So was wanting to know that
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ebay.com

wow LOL what a freaking mess!

Damn, good job man.

exb0 said:
Damn, good job man.
Click to expand...
Click to collapse
Thanks

arvinchugh said:
ebay.com
Click to expand...
Click to collapse
Links or it didn't happen
I can't seem to find a good reliable ad actually :/

WasifSal said:
Links or it didn't happen
I can't seem to find a good reliable ad actually :/
Click to expand...
Click to collapse
There you go.
http://www.ebay.com/itm/140993242760?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Sanded, polished, etched the back case of my phone.

THE STORY:
Since I bought this phone I wanted to do something to the back cover, I just wasn't sure what. Plus I wasn't really set on the idea of doing something to risk damaging a perfectly good (and new at the time) phone. That was until about 2 months ago when I managed to put a small hairline crack in the digitizer. Since the phone was no longer undamaged, yet still 100% functional, I figured why the hell not customize it.
I read awhile ago on XDA about some users discussing what the phone would look like with a polished look but no one was willing to take the plunge. This seemed like a good/fun project now that I didn't care if I screwed it up.
First I used 1000 grit wet/dry sandpaper to remove the anodization. While this method was working, it was painstakingly slow to get to bare metal. The interesting thing about 1000 grit though, it doesn't remove the anodizing right away yet takes out a lot of the minor blemishes due to everyday use. This could in turn be used carefully to remove any dings you have without removing the anodizing. In this photo it is hard to see, but the top half near the camera hasn't been sanded, while near the HTC logo it has.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since 1000 grit was taking too long, I switched to 400 grit. This seemed to be a decent middle ground. It wasn't too coarse to tear up the aluminum but just enough to take off the anodization a little quicker. You can see I managed to scratch the camera lens cover a bit... don't worry FYI: anodizing can be removed via a chemical bath, but who would be willing to put their whole phone in a vat of liquid....
Now that I was down to bare metal I switched to 3000 grit sandpaper I picked up from O'Reilly's Auto Parts. This smoothed out a lot of the larger scratches from the 400 grit paper and gave a good dull, almost brushed, look to the aluminum.
Now that I had a mostly blemish free surface, I used Turtle Wax Polishing Compound to smooth out any remaining small imperfections. The final step was to use Mothers Aluminum Polish to get a nice mirror finish.
I was pretty satisfied with the result, however, I had to do more...
I recently stumbled across this article on Hack A Day which gave me the inspiration to do the same.
For everyone's information, after polishing the back, this is what your phone will look like after 2 weeks of typical use (for me at least).
Before I started the etching process I had to give the back cover a good re-polishing. Once that was complete I decided on the design I wanted. Typically in most DIY etching, people use some kind of paint or resist to block the areas they don't want etched. Luckily I have an awesome brother-in-law who recently got a hold of an old plotter. So I whipped up a design in Illustrator and he took care of getting me a vinyl cutout to use. Of course I had to go with the two sites I frequent the most as my design... (yes, I know it's a little off center. I got in a hurry ha-ha)
Instead of going with a vinegar and salt solution for my etchant. I decided on a mix of Copper Sulfate, Sodium Bisulfate and table salt. I used a 45% Copper Sulfate, 45% salt, and 10% Sodium Bisulfate mix.
The Copper Sulfate comes as a chunky blue rock/crystal. So I hit it with the mortar and pestle to make dissolve better in water.
After mixing everything in hot water it was time to etch. I used an old 12 volt 1000ma wall wart I had sitting around for my power source. I wired the phone by wrapping it with 1 foot of bare copper wire and tightly wrapping the wire with electrical tape to make sure it would contact the aluminum. I wrapped another wire around a cotton swab tip and connected it to the negative terminal of the wall wart. After making sure the phone was powered off. I connected the positive terminal of the wall wart to the bare wire attached to the phone, making sure it was in contact with the aluminum by testing it with a voltmeter.
Once satisfied with the etch, I cleaned the surface off with a damp paper towel. All that was left was another polish with the Turtle Wax and the Mothers Aluminum Polish. Here is the final result.
A couple of notes:
1. The phone "seems" to get warmer than what it did before (only while watching videos or playing a graphics heavy game). I haven't checked/compared the actual stats, it's just what I have noticed while holding phone.
2. The white plastic that separates the top and bottom will get a little grey from the sanding and polishing. Goof off seems to be a great remedy to make them white again.
3. The scratches on the camera lens protective cover were buffed/polished away while using the Turtle Wax Polishing Compound. Also, the scratches were never over the center portion and did not impact the picture quality while they were there anyway.
4. The speaker phone mic will get compound/polish in it, however a light tap on a table, with the mic facing down, while the compound is still wet removes most of it. Any residual stuff left in the small hole can be removed (CAREFULLY) with the tip of an exacto blade.
5. I have not had any issues with my signal, nor any issues with the mic on the phone since doing this.
I shouldn't have to say this, but anyone who tries this, be careful. You can seriously mess up the phone and I am not responsible if you follow my examples and something goes wrong. Do this at your own risk.
If you would like to do this and have questions or need help, let me know.
-Crack

Looks great mate. Don't know if I could be bothered with all the work myself, but props to you for creating such a unique result.

I wonder if it is posible to polish a black one?

zumyman46 said:
I wonder if it is posible to polish a black one?
Click to expand...
Click to collapse
My brother-in-law's is black... He wants to try all this out, I may report back if he decides to go through with it..

Chrome One...It actually looks amazing.

kinda looks like the m8. Can you put a clear coat or something to seal everything so that it doesnt scratch so easily?

I remember I saw on a truck show there is a sealant that could be used on chrome wheels to keep them shiny and scratch resistant but forgot what the product was called. Without some type of sealant you will get scratches back in no time flat like the I phones do. This is a great idea of if you want a chrome look and the etching is icing on the cake. You are only limited by your imagination. Could really make your phone yours.
Sent from my Nexus 7 using Tapatalk

That's awesome mate it looks great in chrome
Sent from my HTC One using Tapatalk

UltraNoob said:
kinda looks like the m8. Can you put a clear coat or something to seal everything so that it doesnt scratch so easily?
Click to expand...
Click to collapse
I thought about this since this phone is mostly an experiment before picking up the new M8. I forgot who made it, but there is a spray paint that gives the "appearance" of an anodized metallic look in different colors. I know that sounds counterintuitive since I removed the stock anodization, again, this is mainly an experiment. I was thinking of doing some kind of a fade between two colors and then a clear coat.
robgee789 said:
That's awesome mate it looks great in chrome
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I almost wanted to keep it just chrome without the etch, and I almost stopped after seeing the dull brushed aluminum look because I liked it so much..

robgee789 said:
That's awesome mate it looks great in chrome
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Are you talking about plastidip??
Sent from my HTC One using xda app-developers app

Wow, I've never even imagined the One with a "chrome" look like that. It's gorgeous. Unfortunate that it gets scratched up like that, though.

Wow this is epic. How long did the entire process take all together?

tnx FOR SHARING..
I will start polishing very soon. Tnx for great idea and i will post picture result

Good Job!!

First look. After sandpaper i accidentally damage camera lens. But,i try a tip from youtube with toothpaste and now is maybe better than before everything. Just perfect solution for camera lens.. Now i only need to start polishing with some polish paste and we will see resoults soon..

Crackanug said:
My brother-in-law's is black... He wants to try all this out, I may report back if he decides to go through with it..
Click to expand...
Click to collapse
Will work the same. Anodizing only creates a hardened surface a few microns thick. The sand paper will rub through this quickly leaving the base aluminium colour underneath. The anodize process is what is used to surface harden and create different coloured aluminium surfaces. If your brother in law expects to have a polished black surface afterwards, he won't.

diselhead said:
First look. After sandpaper i accidentally damage camera lens. But,i try a tip from youtube with toothpaste and now is maybe better than before everything. Just perfect solution for camera lens.. Now i only need to start polishing with some polish paste and we will see resoults soon..
Click to expand...
Click to collapse
Looks good so far. :good:
CaelanT said:
Will work the same. Anodizing only creates a hardened surface a few microns thick. The sand paper will rub through this quickly leaving the base aluminium colour underneath. The anodize process is what is used to surface harden and create different coloured aluminium surfaces. If your brother in law expects to have a polished black surface afterwards, he won't.
Click to expand...
Click to collapse
If I recall, those microns sure put up a good fight against the sand paper...

Crackanug said:
If I recall, those microns sure put up a good fight against the sand paper...
Click to expand...
Click to collapse
65-70 HRC..................yes...............very hard surface after anodizing. :fingers-crossed:
Sandpaper is also not the best medium for breaking through it either, but definitely the safest to prevent damaging the aluminium below it.

renehd2 said:
Are you talking about plastidip??
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Hot damn this looks gorgeous just plainly polished. The chrome/mirror look is niiiice - might have get scrubbing this afternoon.

I kind of want to sand my One down and hit it with some automotive grade basecoat and a few coats of clear coat. Anyone have any experience? Will it give me the beautiful glossy finish I think it will?