hi there im trying to install CyanogenMod but everytime im trying to install 2ndInit i press install then chose 0.6.1 stable and its ask for permission then its saying success but then i see 2ndInit recovery NOT currently installed the led is green tho !! anyidea what to do guys ?? i tried to dl it while using PandaPaw VPN and Orbot i have tried 1.4 , 1.7 , 1.9 and 2.0 please help
Related
hello i just want to ask something
because ive been using FroyoBread for 1 Month now and its getting old for me so i want to try GingerDX and i just want to ask if FroyoBread v023 Final automatically installs ClockWorkMod Recovery when i upgraded it from 2.1 Eclair ? Because on the Reboot menu it shows xRecovery and ClockWorkMod but everytime i start ClockWorkMod there is a fatal error about the recovery . . .
Someone please clarify this error if its safe to go on or i need to do something about the ClockWorkMod . .
Install ir manual with x8toolbox
Sent from my X8 using XDA App
ok thanks sir...
hi guys
my defy firmware is on version 5
anyway i downgraded to froyo now i want to install SndInit cuz i want to flash cm7 on my phone
so now on froyo rooted it then rebooted it after the root
now every time i install Sndinit it gives me success then i reboot my phone and my phone just get stock at motorola logo and keeps rebooting
what is wrong ??
i want to flash cm7 and every time i install SndInit i reboot to get to recovery mode it stocks at motorola sign
please help i tried all the versions of SndInit and i always gets stock at motorola sign
please help me i really want to flash cm7 and that SndInit aint working for me
any other way ?
waiting for ur help guys thanks alot in advance
on bootmenu set default 2nd-init and after this wipe cache partiton and dalvik cache. if doesn't work reinstall froyo, root it; install SndInitDefy_2.0.apk (last 2ndInit) and Bootmenu 1.0.4 and CWM 5.0.3.1
thanks for ur replay but i did set it as default also tried the beta
my phone after i install (SndInitDefy 2.0 or 1.4 or 1.5 or 1.9 i tried alots of version )then reboot i just get stock at motorola logo i cant get into recovery and my phone just stays at motorola sign so i flash spf again to make it work
i have tried 2 versions of froyo its the same
what do i have to do what is wrong ?
thanks in advance
dude can you explain more please im having the same problem i cant install 2endint i did install bBootmenu 1.0.4 and CWM 5.0.3.1 but what do i do now? i go to stock recovery ?? please explain a little bit more thank man .
i also had met the same situation as you mentioned. and i found if i unpluged the usb from my computer, sndinit will take effect after rebooted. maybe this could be helpful to you.
Sent from my Nexus S using XDA App
read this, if don't understand search in forum
zyxwvut said:
Monzer, when you install bootmenu are you installing the .apk and then opening the app and then clicking to install 2nd init? This is the right procedure! after you do this reboot your phone and watch for blue led to flash during boot, hit volume down once it flashes blue.
What 2nd init version are you installing? here is the latest http://forum.xda-developers.com/attachment.php?attachmentid=792601&d=1322064151
Are you trying to flash CM7?
There is a very old version of CWM that should be suitable if all else fails you. It should work just fine to flash CM7 but not so sure about CM9. However if you want to flash CM9 You could use this old version of CWM to flash CM7 which will in turn install a new version of 2nd init which is definitely suitable for flashing CM9. This old CWM "might" work for flashing CM9 but I dunno if I would try or not! Download in my attachment below!
You MUST enable USB debugging to install.
copy the apk to your sdcard and use a file manager to install it then open the app in your app drawer and choose to install the custom recovery (with USB dubugging ON)
THIS STEP IS VERY IMPORTANT!!!
AFTER INSTALLING THE CUSTOM RECOVERY DISABLE USB DEBUGGING.
You enter CWM by again opening the app and choosing reboot to recovery (with USB debuggind OFF)
Click to expand...
Click to collapse
Hi guys, i searched but didn't find the problem I'm having...
It's about the cm9 4.0.3 rom, it is great!
But now I'm trying to install the 4.0.4 build, but I keep getting stuck on the not working bootstrap...
I've tried to root the cell again and install the bootstrap but it seems that it doesn't affect the boot, everytime my phone boots directs to the cyanogenmod... =/
CM9 is already rooted and have CWM, so why do you installing bootstrap?
Cause when I power up with the vol - and camera buttons, i try to install from zip and the cm9 4.0.4 get an error while updating (it's not the zip cause i tried to use it before without errors).
How can I proceed?
What is your CWM version?
What error exactly are you getting?
Do not install bootstrap. It is nonsense, since it contain the lowest available version of CWM for M2. You have surely higher version of CWM now.
Thanks for the help, but I can't verify that now.
Tonight I'll check the cmw version and try to install cm9 4.0.4 again.
Then I'll post here again. ^^
Anonymous_ said:
What is your CWM version?
What error exactly are you getting?
Do not install bootstrap. It is nonsense, since it contain the lowest available version of CWM for M2. You have surely higher version of CWM now.
Click to expand...
Click to collapse
I didn`t know the cm9 already have a CWM, how can I boot in it?
The x button boot goes to the android recovery mode (3e) only.
I did read from another thread here.
To get to the cm9 recovery mode I had to select VOL DOWN then choose Custom Recovery.
I swear that I didn't know that, all the installation tutorials use a bootmenu zip to install and then reboot to these recovery mode and CWM.... :S
The CWM version now is 5.0.3.2.
Can I try to install CM9 4.0.4 from here?
Yes. CWM 5.0.3.2 is totally fine for installing CM9.
Hey !
I have a Motorola Defy that uses Android 2.2.2 Froyo and I'm a bit lost.
I recently discovered the Custom ROMs and I want to install one on my device. CyanogenMod 9.
But I also want to keep my original ROM (just in case I have issues with CM9).
I read MultiBoot is an app that allow multibooting. Does it work with the original ROM ?
Thank you for your help.
yes cm9 can be multibooted with stock froyo
Follow these simple manual steps (no need of any app)
Root your device
Install 2ndinit
install cwm bootmenu
Install multiboot.zip by stable recovery( search a bit for this)
Place fsimages folder in root of sdcard( search this too)
Install cm9 nightly( in your case use froyo kernel nightly) by latest/custom recovery
Reboot and open bootmenu ( by pressing vol down on blue led)
Select boot - 2nd boot, your phone will restart with cm9
Hi, sorry for my bad english but i'm italian and i'm new of the world of costume rom (i did the root yesterday:laugh.
I see that "quarx" make a good 4.4 kitkat rom for the defy plus and i tried to install it but when i make it appears "error on the .zip file" and the smartphone can't install it.
This are the step that i have make:
1 obviously the root
2 install 2ndInit version 2.3
3 go to recovery mode
4 make "wipe data factory reset"
5 make "wipe dalvick cache"
6 go to install zip from sd card
The version of the zip is the last posted by quarx, i try with the other version but same problem.
Where is wrong? someone can help me? Fortunately before do all this i make the bakup and now i'm returned with the original 2.3.6 motorola rom.
Ps: i repeat, i'm italian and new for this type of work. Please write easily and step-by-step what i have to do. Thanks!!!
Install 4.3, then download and flash update-recovery from 4.4 thread. Now reboot and flash 4.4
Sent from my MB526 using Tapatalk 4
Thank you very much!!! :good::good::good: This afternoon (if i have time) i will try and i telling you if it work.
Another two question without open other thread: when the defy is upgraded to 4.4 can i do the overclock with a normal apk or i have to do it in recovery mode? And can i install the patch for make 720p video or it was only for the 2.3.6 version?
For the overclok i see that in some costume rom i can use a apk, in other no.
Apk will work
Sent from my MB526 using Tapatalk 4
Nothing, with cm 10.2 same problem, " error in /sdcard/.....zip, installation aborted" :crying:
Stefano2991 said:
Nothing, with cm 10.2 same problem, " error in /sdcard/.....zip, installation aborted" :crying:
Click to expand...
Click to collapse
First install one of the latest CM10/10.1 and then flash CM10.2.
hotdog125 said:
First install one of the latest CM10/10.1 and then flash CM10.2.
Click to expand...
Click to collapse
Yessssss!! it work :victory: i have installed cm10, it automatically reboot, install update-recovery, installed cm11 and work!!!
But now i have some other problems, after install cm11 and turn on and off it i install the gapps. Do that i boot it and appear "app updating", it rest in this screen for a lot if time, i turn off it, boot again and it doesn't work, wipe again all, re- install cm11+gapps in the same time and now it load in the first screen CyanogenMod and don't start working...re-wipe all, re install only cm11 and now (after a lot of time of loading) it's on but the screen is all black exception to notification bar, and now with the new recovery mode i can't make restore of my original data file and i don't know why!! when i enter in recovery-mode/restore there is nothing...F**k!!! Why i'm the only with tis problem??? :crying::crying::crying::crying:
At the end i have decide to install cm10.2...i see that works well (better than cm11) and is stable. When will be available the 4.5 or higher i'll think if make the upload because if i'll have the same problems of updating i'll killing myself!!! :silly: ... for now it's good the android 4.3. from 2.3.6 to 4.3 is a big jump!!! Now the phone works 100000 times better and faster!!!! :laugh:
However thanks for the suggestions!!! :good: