Database Users

[Q] help! umts_jordan nightly to ms2ginger 2.1

hello,
is it possible to switch from cm7.1-nightly to ms2ginger easily?
(cm7.1 is android v. 2.3.7 with kernel 2.32.9)
regards

Yes you can do that easily. The ms2Ginger thread has enough information on how to do that. I have switched twice from Cm7 to ms2g and vice versa.
In a nut shell just restore the manseoid back up of ms2g system, data, boot , dev tree and recovery. Before you do this just take nandroid backup of your current cm 7, which can be useful to switch back at later time if needed.
Sent from my MB526 using XDA App

ok. after installing ms2ginger it seem to be not my flavour.
i tryed to install cm72 (120131.05331-nightly) by epsylon. now, the device boots up, lights blue and green up and nothing more happens..
what can i do? (got backup but want a fresh install)
regards

now, when i push the poweron button, nothing happens..
the led lits up, when usb plugged in.. but thats all..
help?

_xo said:
now, when i push the poweron button, nothing happens..
the led lits up, when usb plugged in.. but thats all..
help?
Click to expand...
Click to collapse
CM7.2 is for Defy+ which uses GB kernel.
You can either flash CM7 kernel if it works, otherwise go to advance restore and restore boot and devtree from MS2 nandroid.

hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help

coolgame said:
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
Click to expand...
Click to collapse
Are you installing MS2G 2.1? and Did you follow the complete restore of nandroid backup, - system, data, boot, devtree and recovery?

yup i did twice.

coolgame said:
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
Click to expand...
Click to collapse
I am searching for the instructions too:
http://forum.xda-developers.com/showthread.php?t=1468867&page=2
Will work the ms2ginger with cg version 6?
Anyone?

I had managed to get working, with instruction in the ms2ginger topic
To begin:
Put the Nandroid backup folder MS2Ginger on the SDCard in this folder: /sdcard/clockworkmod/backup
Root your DEFY and Install BOOTMENU - CWM (2ndInit-Installer 2.0.apk - install 1.0.7) or use this SndInitDefy_2.0.apk
REBOOT
run 2nd-init (voldown on blue LED)
wipe data and cache in "Stable/Custom - Recovery"
Go to "Recovery"
Go to "Latest Recovery"
Go to "Backup and Restore"
Go to "Restore" (system+data)
reboot.
Booting up can take a while, max is about 10 minutes.
THEN(if you want to try also the 3.0)
wipe data/cache/dalvik; Do an advanced recovery and only restore system and data from 3.0NG.

Bootloop, SBF issue >please help

I accidentaly installed the CM9 kernel when i should have installed the CM7 one with ICS. Then i made a nandroid restore of my previous CM7. Than... phone dead. Starting but no CWM no ROM booting.
As i have had CM7 with GB kernel( i think) i flashed ( not knowing) an old SBF than didn't booted. I tried the JORDN_U3_97.21.51 T-Mobile It boots, i can root it, install CWM.
But than when i try to install a CM7 nightly ( installed ok) it dies again. Starts but No CWM no Rom booting.
What to do? I don't know what SBF to flash or what method to install?
Problem update I red that the above SBF has a CG Version 3: SBF 2.51 (Éclair) (Defy) so i installed several CG Version 4: SBF 3.4.2 (Froyo) (Defy).
They don't work. RSD says PASS but phone is dead .No stock recovery no boot. Only way to get it back to life is if i flash the eclair again.
I red that if i get a back screen when booting i have installed a lower CG version. As i tested with version 4, version 5 GB is the only option. I didn't try it out because there are some issues. Froyo would have been much more easier.

i think many readers of your post are getting problems with understanding your problem ...
you got a stock defy, rooted it, installed 2ndinit via apk, booted into recovery (vol- at blue led) and installed CM7 zip ??? correct ???
after succesfull install of CM7 your phone doesn't turn on? Black screen?
black screen after zip is (i think) impossible ... but i can fail ...
i would like to help you, but first you have to give the detailed steps you did and what you wanted to do ...

To make it simplier
I installed the JORDN_U3_97.21.51 T-Mobile (which is 2.1 update1) It boots, i can root it, install 2nd-init > CWM. Set Normal boot.
Than in CWM nothing works.
Installing a CM7 nightly, or restoring a CWM backup.
I install a CM7 nightly like this> In CWM> Custom Recovery> Wipe data, wipe cache> install Cm7 zip, install Gaaps zip. After this, phone restarts, screen is on, logo appears and i wait and wait. Nothing happens.
Do i have to install a special CM7 build?
The CWM backup does not restore. It says that files are missing ( like android.secure..) I am not interested in keeping downgrade ability. i would like to try another SBF. I am not 100% sure what SBF to use from the wiki page.
I red that the SBF i installed has some special "problems" here> http://forum.xda-developers.com/showthread.php?t=905371. They are talking of a CWM revoery app by tenfair here> http://forum.xda-developers.com/showthread.php?t=875233
Maybe that works^. Will try it after the phone is fully charged.

so, ok ... thats detailed as i wish
ok, the problem is clear i think ... first of all eclair is not a nice system for a defy ... upgrade to froyo or even gingerbread ... (keep in mind, that GB has problems with green lens camera) ...
than you can root it with SuperOneClick e.g. ... if this is running correctly, you can install 2ndinit via apk ... then boot, vol- while blue led (i know, you know how ) ... in that clockworkmod recovery you can wipe the devices data and cache partition (even wipe dalvik cache in advanced menu) ... then install CM7.2-nightly-.... .zip ... you may have to flash an fixed sbf with the nessesary kernel for CM7 at this point to boot ...
if this is working fine, you can install the gapps.zip via recovery ...
also try to set boot to 2ndinit in boot-menu ... i don't think it's "normal" boot for CM7 ... but i can't try at the moment cause of my bricked defy ...

Thanks for the reply.
The problem is that i can't install other Froyo SBF's. Will try Gingerbread SBF. The last froyo didn't boot, will try a new one. Weird, i know. Maybe someone can tell me which CM7 to flash? An older one with Kernel ? I didn't think the install would be so tricky.

Froyo Full-SBF doesn't boot on your defy?
be aware of flashing Gingerbread then ... if GB doesn't boot, you will have a problem downgrading to froyo / eclair ...
it sonds crazy, that froyo isn't booting on your device ... have you done a full wipe after froyo sbf? it's important ...

I'm on the Eclair SBF right now. What should i do? Go into recovery and do a wipe or install a new Froyo SBF? It's about the CG value maybe. I understand the mechanism but don't know how to check the CG value. If i search for my current eclair SBF i get all sorts of weird stuff. Nevertheless i will try and try until i succeed. It took me a while to figure out the Rooting method. Superoneclick does not work. It's a special method for the 2.51.
The thing is that i wanted to go the my Nordic SBF( the one Quarx used during the first days of CM7) and it didn't booted. That's why i tried this one. Funny ho flashing the wrong kernel(CM9 instead of CM7) can brake things like this. What i don't understand is how my CWM backup didn't restore. It restored well, finished, then phone dead. No CWM.
edit: i just red: 2.51 is Not downgradable. But no downgrade to what??? Will try to some Froyo SBF's, see if works. But that does not solve my CM7 issues.

Tried a few Froyo SBF's. Wiped data/cache in Stock Recovery. RSD says PASS than phone does not boot. Only the 21.51 eclair works all the time.....Where next?
Update 2 got it to work with this>
http://forum.xda-developers.com/showthread.php?t=1486731&highlight=cg

OMG i dn't understand what was going on with your defy, but i'm happy to know your on the road again
the only sbf that are running are the stock eclair you have (21.51) and the modded BL6 with Froyo Kernel ???

Glad it worked.
DJ_Synergy said:
OMG i dn't understand what was going on with your defy, but i'm happy to know your on the road again
the only sbf that are running are the stock eclair you have (21.51) and the modded BL6 with Froyo Kernel ???
Click to expand...
Click to collapse
Yes but now i am running CM9 flawlessly. So happy. The only thing that bothers me is the Chinese Boot screen )). But that can be changed. It's great that one SBF works, moded or not. I tried like 6,7 other Stock sbf's before. So a message to whom tries to install SBF's: Stay away from JORDN_U3_97.21.51 SBF. Even the Rooting method is awful (until you find it) .

HI Deonix, I have the similar problem. However I am unable to use RSDlite as it gives a failure messg when u click start. I tried JRDNEM_U3_3.4.3-36-1.7.sbf and JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B50AA028.0R_USAJORDANRTINT15_P003_A020_HWp3_Service1FF.sbf.
Both failed, I will try using the rsdlite after the cache and factory rest this time based on your suggestions. Can you tell, if your adb command was listing your device, as mine is not.
my CWM is also gone I get some old android recovery system 3e instead which fails after signature check.

Hi,
I think I know what is your problem.
I also installed the firmware JORDN_U3_97.21.51 and now I can only install any Custom ROM after installing the firmware fix for JORDN_U3_97.21.51.
I did upload it for you: http://www.4shared.com/rar/o02VEk_v/firmware.html?refurl=d1url
It is the following:
Install JORDN_U3_97.21.51;
Rootear;
Install the Recovery;
Install the fix;
enter the recovery and install any rom you want, remembering to delete the caches (data and Dalvik cache)
ps: have 100% of the battery before installing the SBF.
any problems let me know.

Sometimes you could get stuck in a bootloop and all you need to do is pull battery and reboot
Sent from my MB525 using xda premium

Same Problem, Please help!
Deonix said:
Yes but now i am running CM9 flawlessly. So happy. The only thing that bothers me is the Chinese Boot screen )). But that can be changed. It's great that one SBF works, moded or not. I tried like 6,7 other Stock sbf's before. So a message to whom tries to install SBF's: Stay away from JORDN_U3_97.21.51 SBF. Even the Rooting method is awful (until you find it) .
Click to expand...
Click to collapse
Hey bro.
Even i have got the Defy working, but its not detecting the device when connected to the computer, i have done all the basic troubleshooting, is it working for you??
is it bcoz this room is for ME525??

[Q] Motorola Defy+ MB526 CM installation doubts

Hi! I have some doubts to install custom ROM on Motorola Defy+:
When I install CM on Galaxy Note I directly download from CM website, but when go to look for Defy+ I found only the Defy (not +) and the most newest version is 7, instead 9, 10.1 and 10.2 that I can look searching here in XDA. What is the reason of this difference?
Exist any method that if I not like keep the CM can go back to my Defy+ original ROM and unrooted?
Actually the Defy+ have Android 2.3.5 with the operator ROM.
Thanks for your help!

DroidAR said:
Hi! I have some doubts to install custom ROM on Motorola Defy+:
When I install CM on Galaxy Note I directly download from CM website, but when go to look for Defy+ I found only the Defy (not +) and the most newest version is 7, instead 9, 10.1 and 10.2 that I can look searching here in XDA. What is the reason of this difference?
Exist any method that if I not like keep the CM can go back to my Defy+ original ROM and unrooted?
Actually the Defy+ have Android 2.3.5 with the operator ROM.
Thanks for your help!
Click to expand...
Click to collapse
The Defy/Defy+ has no official support from CM after CM7.2. Quarx2k maintains unofficial and highly stable ROMs for the device, despite its limitation of locked bootloader.
Root with framaroot, then install the 2ndinit app. Open the app, and press install 2ndinit bootmenu. Then reboot, go to recovery (press volume down when blue LED lights up) and take a nandroid backup. It is possible to go back to stock via flashing SBF using RSDLite.

hotdog125 said:
Root with framaroot, then install the 2ndinit app. Open the app, and press install 2ndinit bootmenu. Then reboot, go to recovery (press volume down when blue LED lights up) and take a nandroid backup. It is possible to go back to stock via flashing SBF using RSDLite.
Click to expand...
Click to collapse
Thanks for the answer and explanation! I try do soon. Thanks. When I make the nandroid backup and make a backup of actual ROM (operator ROM) but rooted, right?

DroidAR said:
Thanks for the answer and explanation! I try do soon. Thanks. When I make the nandroid backup and make a backup of actual ROM (operator ROM) but rooted, right?
Click to expand...
Click to collapse
Yes. You can unroot later.

hotdog125 said:
Yes. You can unroot later.
Click to expand...
Click to collapse
Thanks! I try found all the links to the programs that you recommend me and try

hotdog125 said:
Yes. You can unroot later.
Click to expand...
Click to collapse
I can do some of the steps but I have a problem:
> Already root with Framaroot: OK
> Already install 2ndinit + Superuser: OK
> Nandroid backup: OK
> In Android Bootmenu I select + Recovery --> Custom Recovery, OK until here.
> I do the wipes, OK also
When I try install the ZIP of CM 10.2 ( cm-10.2-20130801-NIGHTLY-mb526.zip ) the process abort and show me the message:
"(status 0) Installation aborted"
I read that for this error message, and the first time, I need install using DUAL RECOVERY (TWRP). I donwload the ZIP of this DUAL RECOVERY (CWM_TWRP_v3-signed.zip) but now start the problem, after install OK, I can boot again the device and see again the Android Bootmenu, but each time that I select CUSTOM RECOVERY the photo show a blank screen and later the Motorola logo and operator logo loop...
Here I don´t know if this is correct or I miss press something in any step, but I can´t boot again in CW recovery or TWRP...

I turn on the Defy+ normally and see that after wipes, the phone boot normally in a clean stock 2.3.5 if this info is usefull...

DroidAR said:
I turn on the Defy+ normally and see that after wipes, the phone boot normally in a clean stock 2.3.5 if this info is usefull...
Click to expand...
Click to collapse
Dual recovery is only for JB ROMs.

DroidAR said:
I turn on the Defy+ normally and see that after wipes, the phone boot normally in a clean stock 2.3.5 if this info is usefull...
Click to expand...
Click to collapse
Install cm10 before, then install cm10.2
Sent from my MB526 using Tapatalk 2

hotdog125 said:
Dual recovery is only for JB ROMs.
Click to expand...
Click to collapse
thekguy said:
Install cm10 before, then install cm10.2
Click to expand...
Click to collapse
Thanks guys!
Ups, this mean than now I need install again from the 2.3.5 the 2ndinit to get back the CW recovery, right?
After this I need:
- Install the CM 10.1 from CW
- Install the CM 10.2 from CW or also here I need install before the DualRecovery and from TW install the CM 10.2?
Thanks for your help again!

DroidAR said:
Thanks guys!
Ups, this mean than now I need install again from the 2.3.5 the 2ndinit to get back the CW recovery, right?
After this I need:
- Install the CM 10.1 from CW
- Install the CM 10.2 from CW or also here I need install before the DualRecovery and from TW install the CM 10.2?
Thanks for your help again!
Click to expand...
Click to collapse
Yes. Then after installing CM10.1 install CM10.2.

hotdog125 said:
Yes. Then after installing CM10.1 install CM10.2.
Click to expand...
Click to collapse
Thanks, ready, already running 10.2
Anyone have the link of correct zip of gaaps? I already download one for 4.3 from goo.im but show me a error when I try install.
Thanks again!
UPDATE: I already download a pack from goo.im labeled as: gapps-jb-20130813-signed.zip
install done, but after turn on the phone I look that this pack not have Google Play, can be possible?

Phone work perfect but not connect to my local operator no signal, no 3G I select from settings-- Advanced -- Baseband selection -- and America Argentina Claro 3.4.2-107.9 that is my local operator. I reboot, but nothing work Any idea?
Click to expand...
Click to collapse
Fixed this I change by the 6.14.7 that no have the label of my operator and work!!!

Now look that all work fine after I install one pack of gapps called gapps-jb4.3-20130813-minimal_edited_20130814.zip from this post. All look good but the strange is that I need install all apps manually, not autoinstall when I login. Maybe because is a "minimal" pack, right?
Now I try restore some data from old apps that I made a backup with Titanium, but now titanium tell me that I not have ROOT access. This CM 10.2 ROM lack of root? How I can root again this ROM to can use titanium?
Thanks again!

DroidAR said:
Now look that all work fine after I install one pack of gapps called gapps-jb4.3-20130813-minimal_edited_20130814.zip from this post. All look good but the strange is that I need install all apps manually, not autoinstall when I login. Maybe because is a "minimal" pack, right?
Now I try restore some data from old apps that I made a backup with Titanium, but now titanium tell me that I not have ROOT access. This CM 10.2 ROM lack of root? How I can root again this ROM to can use titanium?
Thanks again!
Click to expand...
Click to collapse
Yes, the root access is a bug. To enable, go to developer options, root access, disable and enable again.

hotdog125 said:
Yes, the root access is a bug. To enable, go to developer options, root access, disable and enable again.
Click to expand...
Click to collapse
I try but no success Titanium continue tell me that not have root. Each time that I disable and enable again I need restart the phone? Thanks!

Any idea to can get root again and can use the Titanium? Thanks!

[Q] Error Install android 4.4 on mb526

Hi, sorry for my bad english but i'm italian and i'm new of the world of costume rom (i did the root yesterday:laugh.
I see that "quarx" make a good 4.4 kitkat rom for the defy plus and i tried to install it but when i make it appears "error on the .zip file" and the smartphone can't install it.
This are the step that i have make:
1 obviously the root
2 install 2ndInit version 2.3
3 go to recovery mode
4 make "wipe data factory reset"
5 make "wipe dalvick cache"
6 go to install zip from sd card
The version of the zip is the last posted by quarx, i try with the other version but same problem.
Where is wrong? someone can help me? Fortunately before do all this i make the bakup and now i'm returned with the original 2.3.6 motorola rom.
Ps: i repeat, i'm italian and new for this type of work. Please write easily and step-by-step what i have to do. Thanks!!!

Install 4.3, then download and flash update-recovery from 4.4 thread. Now reboot and flash 4.4
Sent from my MB526 using Tapatalk 4

Thank you very much!!! :good::good::good: This afternoon (if i have time) i will try and i telling you if it work.
Another two question without open other thread: when the defy is upgraded to 4.4 can i do the overclock with a normal apk or i have to do it in recovery mode? And can i install the patch for make 720p video or it was only for the 2.3.6 version?
For the overclok i see that in some costume rom i can use a apk, in other no.

Apk will work
Sent from my MB526 using Tapatalk 4

Nothing, with cm 10.2 same problem, " error in /sdcard/.....zip, installation aborted" :crying:

Stefano2991 said:
Nothing, with cm 10.2 same problem, " error in /sdcard/.....zip, installation aborted" :crying:
Click to expand...
Click to collapse
First install one of the latest CM10/10.1 and then flash CM10.2.

hotdog125 said:
First install one of the latest CM10/10.1 and then flash CM10.2.
Click to expand...
Click to collapse
Yessssss!! it work :victory: i have installed cm10, it automatically reboot, install update-recovery, installed cm11 and work!!!
But now i have some other problems, after install cm11 and turn on and off it i install the gapps. Do that i boot it and appear "app updating", it rest in this screen for a lot if time, i turn off it, boot again and it doesn't work, wipe again all, re- install cm11+gapps in the same time and now it load in the first screen CyanogenMod and don't start working...re-wipe all, re install only cm11 and now (after a lot of time of loading) it's on but the screen is all black exception to notification bar, and now with the new recovery mode i can't make restore of my original data file and i don't know why!! when i enter in recovery-mode/restore there is nothing...F**k!!! Why i'm the only with tis problem??? :crying::crying::crying::crying:

At the end i have decide to install cm10.2...i see that works well (better than cm11) and is stable. When will be available the 4.5 or higher i'll think if make the upload because if i'll have the same problems of updating i'll killing myself!!! :silly: ... for now it's good the android 4.3. from 2.3.6 to 4.3 is a big jump!!! Now the phone works 100000 times better and faster!!!! :laugh:
However thanks for the suggestions!!! :good:

Help to find sbf file

Hi!
My defy green lens was on cm7.
I wanted to go to cm11...
However now my phone does not boot and i want to flash. I don't know much about this things so I red forums. Now I want to know which sbf file i must download.
Thank you and Sorry for my bad english
Sent from my Nexus 4 using XDA Free mobile app

First follow the instructions in this guide listed in "Common Problems/Questions" section.
This is what helped me:
Method 1:
Download this SBF and Flash it
Do a factory reset
Root your Phone
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery
Download and install this Nandroid Backup << File is Back, thanks Ichibanme again!>>
Enter Recovery, Wipe Data/Cache
After wiping, turn off your phone
Turn it on and get immediately into Bootloader mode
Flash this Fixed SBF
Delete Data/Cache again and reboot.
Then follow this guide [GUIDE][FAQ][Android 4.4 KitKat] Installing & Customizing CM11 or SlimKat

another possibility for non BL7 stock
- or you can flash this sbf
or this sbf which are both froyo stock
- root it using this one on Windows
- install cwm with 2nd Init 2.3 apk
- and at least flash twrp 2.6.3.0 which is necessary to get cm 11 boot because of SElinux support
!!! after flashing twrp u need to reboot to recovery again and flash rom right away !!! otherwise it won't boot
this helped me to get rid of it