Database Users

Having some issues with USB recognition

I'm trying to get the one click lag fix 2.0 onto my phone. However I've run into quite a few problems. Everything was fine, I was having no problems with connecting to my computer. However when I connected the USB cable again, the phone receives power from the cable but neither the phone or laptop recognize each other. I tried doing all sorts of things (turning on USB debugging and all that) but to no avail. I decided to try to do the factory reset. While the phone was rebooting the "Found new hardware" bubble popped up and it recognized it but as soon as everything was loaded it was gone.
Then I tried restarting it with USB debugging off and it DID recognize it. However once I restart it like that there is no way to turn USB debugging back on without disconnecting it... and once i do that and activate USB debugging, the phone is not recognized again.
This has been a pretty frustrating ordeal and I have tried it on multiple PCs. I am using the stock cable that came with the phone...
Any ideas?

Same thing happens to me. Stock cable would show up as a device when plugged into multiple computers. I swapped phones but I'm sure its just a cable issue.
Sent from my SGH-T959 using XDA App

Have you downloaded the latest USB driver for the phone from samsung's website?
What OS are you using?
Make sure you plugged your USB cable into USB 2.0.
Also, make sure the USB sliding door is fully opened and locked. The door on the phone could prevent a good connection from taking place.

ConceptVBS said:
Have you downloaded the latest USB driver for the phone from samsung's website?
What OS are you using?
Make sure you plugged your USB cable into USB 2.0.
Also, make sure the USB sliding door is fully opened and locked. The door on the phone could prevent a good connection from taking place.
Click to expand...
Click to collapse
Yes, I do have the latest driver.
I have tried doing this on both Mac (snow leopard) and windows XP (different laptops).
All the connections are good and they are all certainly usb 2.0.

Can't Connect to Windows 7 After 3.1 Update

I'm using the Google I/O Limited Edition Samsung Galaxy 10.1" tablet. Connected and developed with the device fine on my Windows 7 machine until the 3.1 update last night.
Now, when plugging in the USB, the new USB debugging icon (the Android bee) shows up in the tablet's tray. However, Windows 7 doesn't find the device. I've tried power cycling my PC and the tablet. I've tried disabling USB debugging several times. I've installed Kies, but it does not successfully install the required drivers. I attempted to install the driver listed on Samsung's page for the device, but it didn't appear to do anything.
I was actively developing an app for tablets, and this has ground my progress to a halt. Anyone else experiencing this? Have a fix?

Have you tried a different USB port (on hub) or a direct USB port on the motherboard?

cosimoss said:
Have you tried a different USB port (on hub) or a direct USB port on the motherboard?
Click to expand...
Click to collapse
Yeah, that doesn't do anything.

Well mine wasnt working all i did was take the usb out uncheck usb debuggin and plugged it back in and it worked..

Yeah, I've tried enabling/disabling USB debugging, plugging and unplugging the USB. Still nothing.
Again, the behavior I'm getting is that the tablet is indicating that USB debugging is on when I plug the device in. I get the USB debugging icon in the tablet's system tray. But Windows 7 just isn't seeing it. This sure seems to be a driver issue.

Finally got it working. It took doing a factory reset on the device.

I had to turn off usb debugging, then plug usb back in.... tablet said that I had to disable bluetooth, disabled and it worked pefectly! So could it possibly be a problem with bluetooth!?!?

[Q] I cant connect ny hd2 on my computer

Hi im new here
I got my hd2 when it first came out running winmo 6.5 now i just cant connect it to the computer tried more than 1 computer and more than one cable when i connect it only charges i receive nothing on the computer like i used to before i have tried everything in the setting usb to pc still same thing
please help me how can i connect it
and i also tried hard resetting it more than once same thing

under settings tab -----other , there will be a usb to pc button

I bet you have tried all setting changes so since you have done a hard reset and it still doesnt work, it has to be your micro USB cable. I had the exact same problem as yours and i feared that it was the micro USB port that was faulty. But then i tried a different micro USB cable and it works perfectly. Hence, it is likely to be your cable. Im not bad mouthing HTC because of the amazing work they have done, but their accesories seem to be a bit down on quality. My original micro USB cable is now frayed and almost severed, my Touch HD micro USB is also frayed and the original earpiece is now experiencing audio balance issues.

the thing is the cable that comes with the hd2 i lost it but when i was using it i could connect
but now im using nexus one cable and Nokia n900 cable to connect to the computer and it just charges like i said nothing appears

Have you tired different ports in your computer or tried reinstalling the drivers? To do that, uninstall the Activesync or Windows Mobile Device Center in your PC and reinstall it. Then try. If you still cannot connect your HD2 to the PC for USB mode, then im afraid the micro USB port in your HD2 is faulty. Try the above. Meanwhile, use the SD card method for flashing or transfer files using wi-fi or bluetooth.
Good Luck

If your HD2's USB port doesn't work you can connect to ActiveSync via bluetooth. I do that very often for a quick synchronization, and since HD2 has an Activesync profile it's easy to configure...
Anyway, check that "accept USB connections" option is selected in your pc ActiveSync configuration.

Most probably, he's facing the da** usb port breaking issue.

kawshigan said:
Have you tired different ports in your computer or tried reinstalling the drivers? To do that, uninstall the Activesync or Windows Mobile Device Center in your PC and reinstall it. Then try. If you still cannot connect your HD2 to the PC for USB mode, then im afraid the micro USB port in your HD2 is faulty. Try the above. Meanwhile, use the SD card method for flashing or transfer files using wi-fi or bluetooth.
Good Luck
Click to expand...
Click to collapse
from where can i download windows mobile device after uninstalling it?

You will find it here.

Thanks for everyone who hellped it turned out nothing was wrong with my hd2 cause i tried connecting my cousins hd2 using the cable i use it didnt work
turned out i must connect the original hd2 cable

Samsung Galaxy S5 USB 3.0 Not connecting

Hey guys, quick question for those of you with the s5, and the usb 3.0 cable.
I am trying to transfer files from my windows 7 pc. with the usb 3.0 cable.
USB 2.0 works just fine, I switch over to usb 3.0, and the phone immediately dissapears from my pc.
Switch back to 2.0, and it reappears.
Is this happening to anyone else?

Maybe you have a faulty usb 3.0 cable. Try with a different usb 3.0 cable. If it's not the cable try on different computer. After that remains only one possibility: a faulty usb connector which means service. BTW you have usb 3.0 drivers installed on your w7?
Sent from my C6833 using XDA Premium 4 mobile app

Yeah i have a problem with the usb 3.0 too..
When i connect my phone via usb 2.0 it works fine but when i connect it via the usb 3,0 its still only shows up as a usb 2.0 device and the both only charge at 98ma :-/ brand new usb 3.0 cable. unistalled usb 3.0 drivers still no luck.

Not_That_Droid said:
When i connect my phone via usb 2.0 it works fine but when i connect it via the usb 3,0 its still only shows up as a usb 2.0 device and the both only charge at 98ma :-/ brand new usb 3.0 cable. unistalled usb 3.0 drivers still no luck.
Click to expand...
Click to collapse
I've got this issue as well....
except when I attempt it on my work PC with W7 x64 it works in USB2.0 and USB3.0 mode. At home on my W7 x64 build it shows up under my computer in USB2.0 mode but disappears when switching to USB3.0 mode....
tried reinstalling drivers and all that jazz and no luck.
tried two USB3.0 cables and neither work on my home rig. i'm stumped

Plug in another USB 3.0 device such as a memory stick into your computer to determine whether the issue originates from the phone/USB cable or your computer. From what you described we cannot identify the root cause!
Sent from my SM-G900W8 using Tapatalk

I had this issue too, then found it was my motherboard being the issue, i turned xHCI to on instead of auto (in the BIOS) and now when i connect my S5 with USB 3.0 cable the option for that mode will show on the phone.
Auto should work but it didn't seem to allow the S5 to trigger it, maybe because the S5 defaults to USB 2.0 and then you say to it to use USB 3.0
I do notice when switching modes the phone will vasish from the computer and then after a moment or 3 show up again
http://www.tonymacx86.com/lion-desk...te-uefi-motherboards-xhci-mode-explained.html

fiddled with bios settings on ASUS mobo... still no luck

a) Click on “Start” and Right Click on “Computer” and select “Manage”.
b) Now select “Device Manager” and Right Click on the individual “USB controller drivers” and select “Uninstall”.
c) Restart the computer and check if the issue persists.

if the cable is a cheap one that claimed to be usb 3.0 from eBay bin it and buy one from a decent retailer or Samsung

thanks for the ideas, tried device manager uninstall and reboot. still no luck. I"m using the provided samsung usb 3.0 cable so no issues there. very frustrating I cant use my phone connection to it's full potential

v2kai said:
thanks for the ideas, tried device manager uninstall and reboot. still no luck. I"m using the provided samsung usb 3.0 cable so no issues there. very frustrating I cant use my phone connection to it's full potential
Click to expand...
Click to collapse
Old thread I know but here is what seems is the answer.
It seems when first connecting the usb it always defaults to usb2, but then can goto the usb settings on the phone afterwards and switch to media usb3 mode. I have not found a way to make it default to usb3 mode.

chrcol said:
Old thread I know but here is what seems is the answer.
It seems when first connecting the usb it always defaults to usb2, but then can goto the usb settings on the phone afterwards and switch to media usb3 mode. I have not found a way to make it default to usb3 mode.
Click to expand...
Click to collapse
Appreciate the post but the issue wasnt actually switching into usb3 mode. That I knew how to do, it was that when I do switch the phone to USB3 mode it disappears from my file explorer and I cannot access the phone storage media unless I switch back to USB2 and then it pops up again in file explorer. I still havent found a solution and have come to the conclusion it is a hardware issue likely tied to my motherboard and have just accepted it and used it in it's limited form

I don't even see any option on my S5 to switch to USB3.....
Is this option device-specific?? I have the international version SM-G900H
Edit: never mind....the cable I had was a fake....
I tested my S5 with a cable from a USB 3.0 external hdd and it worked...

chrcol said:
Old thread I know but here is what seems is the answer.
It seems when first connecting the usb it always defaults to usb2, but then can goto the usb settings on the phone afterwards and switch to media usb3 mode. I have not found a way to make it default to usb3 mode.
Click to expand...
Click to collapse
This is the solution, thank you.

dglaboi said:
I don't even see any option on my S5 to switch to USB3.....
Is this option device-specific?? I have the international version SM-G900H
Edit: never mind....the cable I had was a fake....
I tested my S5 with a cable from a USB 3.0 external hdd and it worked...
Click to expand...
Click to collapse
So are you saying that if the cable is faulty (or in other words, USB 3.0 is not achievable with the current connection) that the USB 3.0 option simply does not appear on the phone? That may explain why I am also only seeing MTP or PTP with a 3.0 cable and hub

Reading these replies and I still don't have a solution.
I have a Lenovo P50 ThinkPad and I normally connect my S5 via USB 2.0, but I'm wanting to transfer about 20gb of files off my microSD card to my machine. When I connect with 2.0, I can't even get the entire folder to show in the navigator window.
I tried to connect to the 3.0 ports, which I use with my external HDD with no problems. I'm even using the same cable.
And yes, it's a legit 3.0 cable.
Still no solution...

Did you find a solution?

Windows 10 HP laptop doesn't recognise the phone.

Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.

joinsudhakarreddy said:
Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.
Click to expand...
Click to collapse
I've had this issue with pen drives and my USB port had an issue(short circuited).
Check these :
Try running devices troubleshooter from control panel.
If the phone is charging properly by using the same cable , it's probably an issue with the laptop.
Is it on pie?

joinsudhakarreddy said:
Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.
Click to expand...
Click to collapse
1. Enable USB Debugging in developer options
2. Download and install ASUS USB Driver from asus website like below. Search for ASUS_Android_USB_drivers_for_Windows
www+asus+com-in-Phone-ZenFone_5_A502CG-HelpDesk_Download
i am newbie, replace + with . & - with /

james11705 said:
I've had this issue with pen drives and my USB port had an issue(short circuited).
Check these :
Try running devices troubleshooter from control panel.
If the phone is charging properly by using the same cable , it's probably an issue with the laptop.
Is it on pie?
Click to expand...
Click to collapse
Sir I've tried debugging thing already and set the option to MTP. I've run troubleshooter too but windows couldn't identify and solve the problem. I'm guessing the problem is with windows 10. So I've decided to installed windows 7 in a different drive. Maybe that'll solve the problem.
Phone is running on Oreo.
Note:- I think micro usb has four pins. One among them might be a ground pin. One must be for charging and other must be to transfer data. Correct me if I'm wrong.

I had several times repairing phone with broken micro usb connector, it has 5 pin to be soldering on it. 2 for the power and 3 for data transfer. If the cable is fine for other devices then maybe the problem is not from the cable itself. I had an experience like that case before that if the notification from the pc says connected device is malfunctioned, that may caused by when u first time connected the phone to the pc, the device is disconnected when it still trying to instal the driver. When u connected the phone to pc check on the device manager, if u see "!" icon there, then theres the problem, ur phone driver not installed properly, u can try manual instal of device driver from there.

Last usb device you connected malfunctioned. Windows does not recognise it
"USB device not recognized. The last USB device you connected to this computer malfunctioned, and Windows does not recognize it” always appears in Windows 10 and Windows 8.
And the reasons for the issue contains:
The currently loaded USB driver has become corrupted or unstable
USB drivers need to be updated
USB drive may be entering selective suspend
USB has some damaged files or bad sectors
USB drive has not been formatted correctly
For different reasons, you need to take different measure, but you can directly format it via AOMEI Partition Assistant to solve the usb device not recognize issue.

The USB port itself was damaged. So I got replacement and now the new phone works fine with same laptop. Thanks you all for your replies.