I'm using the Google I/O Limited Edition Samsung Galaxy 10.1" tablet. Connected and developed with the device fine on my Windows 7 machine until the 3.1 update last night.
Now, when plugging in the USB, the new USB debugging icon (the Android bee) shows up in the tablet's tray. However, Windows 7 doesn't find the device. I've tried power cycling my PC and the tablet. I've tried disabling USB debugging several times. I've installed Kies, but it does not successfully install the required drivers. I attempted to install the driver listed on Samsung's page for the device, but it didn't appear to do anything.
I was actively developing an app for tablets, and this has ground my progress to a halt. Anyone else experiencing this? Have a fix?
Have you tried a different USB port (on hub) or a direct USB port on the motherboard?
cosimoss said:
Have you tried a different USB port (on hub) or a direct USB port on the motherboard?
Click to expand...
Click to collapse
Yeah, that doesn't do anything.
Well mine wasnt working all i did was take the usb out uncheck usb debuggin and plugged it back in and it worked..
Yeah, I've tried enabling/disabling USB debugging, plugging and unplugging the USB. Still nothing.
Again, the behavior I'm getting is that the tablet is indicating that USB debugging is on when I plug the device in. I get the USB debugging icon in the tablet's system tray. But Windows 7 just isn't seeing it. This sure seems to be a driver issue.
Finally got it working. It took doing a factory reset on the device.
I had to turn off usb debugging, then plug usb back in.... tablet said that I had to disable bluetooth, disabled and it worked pefectly! So could it possibly be a problem with bluetooth!?!?
Related
I'm trying to get the one click lag fix 2.0 onto my phone. However I've run into quite a few problems. Everything was fine, I was having no problems with connecting to my computer. However when I connected the USB cable again, the phone receives power from the cable but neither the phone or laptop recognize each other. I tried doing all sorts of things (turning on USB debugging and all that) but to no avail. I decided to try to do the factory reset. While the phone was rebooting the "Found new hardware" bubble popped up and it recognized it but as soon as everything was loaded it was gone.
Then I tried restarting it with USB debugging off and it DID recognize it. However once I restart it like that there is no way to turn USB debugging back on without disconnecting it... and once i do that and activate USB debugging, the phone is not recognized again.
This has been a pretty frustrating ordeal and I have tried it on multiple PCs. I am using the stock cable that came with the phone...
Any ideas?
Same thing happens to me. Stock cable would show up as a device when plugged into multiple computers. I swapped phones but I'm sure its just a cable issue.
Sent from my SGH-T959 using XDA App
Have you downloaded the latest USB driver for the phone from samsung's website?
What OS are you using?
Make sure you plugged your USB cable into USB 2.0.
Also, make sure the USB sliding door is fully opened and locked. The door on the phone could prevent a good connection from taking place.
ConceptVBS said:
Have you downloaded the latest USB driver for the phone from samsung's website?
What OS are you using?
Make sure you plugged your USB cable into USB 2.0.
Also, make sure the USB sliding door is fully opened and locked. The door on the phone could prevent a good connection from taking place.
Click to expand...
Click to collapse
Yes, I do have the latest driver.
I have tried doing this on both Mac (snow leopard) and windows XP (different laptops).
All the connections are good and they are all certainly usb 2.0.
Hi,
I have for two days tried getting my PC to recognize my SGS2. With no luck. I want to ROOT my phone.
I am using Windows 7 64-bit and gingerbread v2.3.5
- USB-debugging is turned OFF.
- I have tried to format the SD-card, even used different SD-cards.
- I have tried using another PC, with no luck.
- Tried diffrent versions of Kies; 1.5, 2.0, and 2.1
- Tried diffrent versions of the Samsung Mobile driver; 1.3 and 1.4.8
- Tried using a different USB-cable (the one I'm using, is original and i can see that my phone is charging.)
- I have formatted the phone several times.
- I have tried typing *#7284# and changes the USB setting from Modem -> PDA
- Windows Drivers are up-to-date.
- I cannot see anything in the Device manager.
What else is there to do? Is something wrong with my phone?
Is there any APK, besides from Gingerbreak, that i can use to root my phone?
Cheers
Could you tried it in another PC with Windows XP?
When you plug it in to the USB port... Does the phone start to charge up?
Sounds like a hardware issue, i too have Windows 7 X64 on my laptop and no such problems.
Give a shot with USB debugging to ON.
jnsmahn said:
Hi,
I have for two days tried getting my PC to recognize my SGS2. With no luck. I want to ROOT my phone.
I am using Windows 7 64-bit and gingerbread v2.3.5
- USB-debugging is turned OFF.
- I have tried to format the SD-card, even used different SD-cards.
- I have tried using another PC, with no luck.
- Tried diffrent versions of Kies; 1.5, 2.0, and 2.1
- Tried diffrent versions of the Samsung Mobile driver; 1.3 and 1.4.8
- Tried using a different USB-cable (the one I'm using, is original and i can see that my phone is charging.)
- I have formatted the phone several times.
- I have tried typing *#7284# and changes the USB setting from Modem -> PDA
- Windows Drivers are up-to-date.
- I cannot see anything in the Device manager.
What else is there to do? Is something wrong with my phone?
Is there any APK, besides from Gingerbreak, that i can use to root my phone?
Cheers
Click to expand...
Click to collapse
I had the same problem.
This may sound stupid, but it does work, try another USB port.
I just plugged my USB cable into either one of the front USB ports on my PC (WinXP) and sometimes the phone connected (Debugging ON: phone was an external hard drive. Debugging OFF: phone connected to KIES) and other times it didn't. I tried toggling the Debugging, switching off and on the phone, changing USB cables, uninstalling KIES and then reinstalling KIES.
I finally noticed that the phone worked fine on the front left USB port and not on the front right. I have the same thing happening on my work's PC (only it was the front right port that worked). The rear USB ports didn't work.
I doubt that it is a problem with the PC operating system (I found out later that someone with a Mac had the same problem). It therefore must be with the phone's software recognising a connection with a computer and only wanting to connect through that initial connection port.
fred_up said:
I had the same problem.
This may sound stupid, but it does work, try another USB port.
I just plugged my USB cable into either one of the front USB ports on my PC (WinXP) and sometimes the phone connected (Debugging ON: phone was an external hard drive. Debugging OFF: phone connected to KIES) and other times it didn't. I tried toggling the Debugging, switching off and on the phone, changing USB cables, uninstalling KIES and then reinstalling KIES.
I finally noticed that the phone worked fine on the front left USB port and not on the front right. I have the same thing happening on my work's PC (only it was the front right port that worked). The rear USB ports didn't work.
I doubt that it is a problem with the PC operating system (I found out later that someone with a Mac had the same problem). It therefore must be with the phone's software recognising a connection with a computer and only wanting to connect through that initial connection port.
Click to expand...
Click to collapse
ive noticed this problem too of it only working with certain usb ports and not others on the same pc. Quite annoying when i was trying to use my phone to transfer some files from another computer and the phone wasnt picked up by the computer.
I think it may have something to do with using MTP rather than standard USB mass storage.
Never plug your phone or any other usb powered device into your front USB ports. most of them do not supply full power. As a matter of practice you should always plug your phone into a direct motherboard USB port on the back of your computer.
I had the same problem with my front ports several times on several computers. My first galaxy S1 would not work on my front port either. all problems were solved by plugging into the direct motherboard usb ports.
Why would you turn USB debugging off?
Sent from my GT-I9100 using XDA App
Do you have Administrator rights?
try installing drivers manually on your pc
and then plug the phone ( usb debugging off )
Try 32bit system
Try using a 32bit XP or 7 PC someone I know had the same problem their Win 7 never gave the problem when flashing or connection with their SGS2 for over 6 months. And just the other day they had a problem so they used a XP 32 bit PC connect ok flashed ok once the phone was rebooted they connect to their Win 7 64bit and the PC saw their handset. So what gives
digitlman said:
Never plug your phone or any other usb powered device into your front USB ports. most of them do not supply full power. As a matter of practice you should always plug your phone into a direct motherboard USB port on the back of your computer.
I had the same problem with my front ports several times on several computers. My first galaxy S1 would not work on my front port either. all problems were solved by plugging into the direct motherboard usb ports.
Click to expand...
Click to collapse
I have plugged in many different phones and other devices that take their power from the Front USB ports on my PC. Power has never been a problem. Recognising a device can sometimes be a problem (but the same problem happens with the rear USB ports).
I regularly charge my SGSII via the Front USB port of my PC (both work and home). Quite a few of my workmates now do the same because a spare microUSB cable is much cheaper than a good mains charger and also they can back up their phone and transfer files as well.
This worked for me
1. Unplug the USB cable
2. On the cell phone, dial the following number: *#7284# Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. The good mode should be PDA. Even if the mode is PDA, switch to Modem and then back to PDA.
3. Plug the USB cable.
Sometimes if you're not using the cord that came with the phone it won't recognize the phone
I had the same problem with my phone but I found the cord the phone came with and it solved the problem
Sent from my SPH-D710 using XDA App
Try turning off your antivirus first for drivers to install. Worked for me.
Sent from my GT-I9100 using xda premium
I have just installed SiyahKernel 2.3 and Windows 7 Ultimate 64 bits did not recognize my SGS2.
What I did is turn on and then turn off the "USB debug" option. It was off at the beginning but... I did that just in case and...
That solved my problem.
Similar issue
My phone charges when plugged in but won't mount. It worked fine until about a month ago.
I'd similar problem.
My SGS2 couldn't be connected to PC (Windows 7 Ultimate 64bit) by USB cable, but it could be connected via Wi-Fi. I found out, that my, however original, USB cable was faulty (could only supply a juice from USB port ). When I used my wife's cable (she's got SGS2 too), everything was fine: my phone connected to PC, Kies v.2.1.0.11112_41 checked firmware and wanted to update, but couldn't do it, because battery was almost flat - I'm charging it now.
Will see tomorrow, however I was able to connect SGS2 to PC via USB cable
Still having the recognition problem, however you can get around it a number if ways. Use Kies wifi to get files to your phone. Use mobile Odin to flash.
Highly recommend to pay the $2 for pro version, that way it will stay rooted.
Sent from my GT-I9100 using XDA App
Hi,
I've got a rooted stock 4.2.1 N10 here, the USB connection to any PC is no longer working. When I plug it in the charging icon on the tablet appears but nothing else happens.
Tried different cables, different ports, different computers. Have disabled/enabled debugging options and storage type of the tablet PTM/MTP.
I'm hopeful the port on the tablet is still working as OTG cable and pen drives work fine.
Any help or suggestions our there for me?
Cheers
I have similar problem. I cannot enter to nexus from windows after rooting.
Install the right drivers.
Or it could be in a couple incredibly rare circumstances that are not at all likely, that your USB cable is broken and the data pins are able to connect. But you probably have a driver problem.
Last night I updated to 4.3 via the very useful thread here, http://forum.xda-developers.com/showthread.php?t=2145848
I was in situation "A" with a completely stock Nexus 4 and the side load went without a hitch. I was able to charge my phone from my wall charger last night with no issue. Today at work I realized that my phone was not charging from my PC via USB cable like it usually does. If I disconnected and reconnected I would see "Charging" on the Battery page for a split second then it would change to "Not Charging" and the phone would notify me that I was connected as a media device.
Trying to troubleshoot the problem I had rebooted the phone and the PC, no luck. I tried turning off the check box that set the phone as a media device and when I unplugged and replugged in my phone it started charging again. To test my theory I turned the "media device" option back on and charging stopped right away. Has anyone else seen this?
Steps to duplicate:
1) Connect phone to PC via USB with Connect as "Media device (MTP)" checked (Settings -> Storage -> Menu -> USB computer connection)
2) See that the phone is not charging.
3) Uncheck "Media device (MTP)"
4) Unplug and replug in USB cable
5) See that the phone is now charging.
6) Re-check "Media device (MTP)"
7) See that phone immediately stops charging.
Not sure if this matters but the PC is running Windows XP. Up until today I have had no issues charging and nothing has changed configuration wise on the PC that I know of.
Thanks,
Eric
A friend of mine just had the problem. It seems that, since 4.3, you can no longer charge if MTP or PTP is activated AND your peripheral is not recognized by the system. I mean, since it is work computers, I assume you do not have privileges to install drivers for your phone. And so, it won't charge until you deactivate the MTP fonction. At home, where your phone is properly recognized and drivers are installed, no problem.
Another solution is to find a "charge only" usb cable, like the ones delivered with external batteries for example. We tried it, and it works also even without deactivate MTP or PTP.
Same Issue. On two different devices out of the box.
virus2013 said:
A friend of mine just had the problem. It seems that, since 4.3, you can no longer charge if MTP or PTP is activated AND your peripheral is not recognized by the system. I mean, since it is work computers, I assume you do not have privileges to install drivers for your phone. And so, it won't charge until you deactivate the MTP fonction. At home, where your phone is properly recognized and drivers are installed, no problem.
Another solution is to find a "charge only" usb cable, like the ones delivered with external batteries for example. We tried it, and it works also even without deactivate MTP or PTP.
Click to expand...
Click to collapse
I own two Samsung devices and they both have the same issue. I have tried different power cords, different USB 2.0/3.0 slots on a Linux laptop, Windows laptop, Mac Mini and Rasperry Pi, turned on developer mode to no avail. The few things I do see that both devices when plugged into an outlet they say Charging (AC). Once unplugged and plugged into a USB port the nav title bar hides and comes back with the battery icon with a red X and stating discharging. I have yet to find a fix for either.
- Samsung Galaxy Tab 3 10.1" 2013 GT-P5210ZWYXAR 4.2.2 Build JDQ39.P5210OUEAMK1
- Samsung Galaxy Note 8 8.0" 2013 GT-N5110ZWYXAR 4.1.2 Build JZ054k.N5110OUEEMF2
Not a fix. Just a possiable answer.
I own two Samsung devices and they both have the same issue. I have tried different power cords, different USB 2.0/3.0 slots on a Linux laptop, Windows laptop, Mac Mini and Rasperry Pi, turned on developer mode to no avail. The few things I do see that both devices when plugged into an outlet they say Charging (AC). Once unplugged and plugged into a USB port the nav title bar hides and comes back with the battery icon with a red X and stating discharging. I have yet to find a fix for either.
- Samsung Galaxy Tab 3 10.1" 2013 GT-P5210ZWYXAR 4.2.2 Build JDQ39.P5210OUEAMK1
- Samsung Galaxy Note 8 8.0" 2013 GT-N5110ZWYXAR 4.1.2 Build JZ054k.N5110OUEEMF2[/QUOTE]
Android 4.4.4 CM 11S USB Charging Issue Resolved
Hi,
I had the same problem with my OPO. My previous device was JellyBean and I could charge even when it was connected as Mass Storage.
My new device used to connect as MTP by default and hence would not charge. I charge it from my work PC which has blocked media transfer through USB and that was the real problem. When I uncheck MTP and connect my device, it would charge. Since my Home PC has no such settings there is no problem when I connect it to that.
Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.
joinsudhakarreddy said:
Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.
Click to expand...
Click to collapse
I've had this issue with pen drives and my USB port had an issue(short circuited).
Check these :
Try running devices troubleshooter from control panel.
If the phone is charging properly by using the same cable , it's probably an issue with the laptop.
Is it on pie?
joinsudhakarreddy said:
Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.
Click to expand...
Click to collapse
1. Enable USB Debugging in developer options
2. Download and install ASUS USB Driver from asus website like below. Search for ASUS_Android_USB_drivers_for_Windows
www+asus+com-in-Phone-ZenFone_5_A502CG-HelpDesk_Download
i am newbie, replace + with . & - with /
james11705 said:
I've had this issue with pen drives and my USB port had an issue(short circuited).
Check these :
Try running devices troubleshooter from control panel.
If the phone is charging properly by using the same cable , it's probably an issue with the laptop.
Is it on pie?
Click to expand...
Click to collapse
Sir I've tried debugging thing already and set the option to MTP. I've run troubleshooter too but windows couldn't identify and solve the problem. I'm guessing the problem is with windows 10. So I've decided to installed windows 7 in a different drive. Maybe that'll solve the problem.
Phone is running on Oreo.
Note:- I think micro usb has four pins. One among them might be a ground pin. One must be for charging and other must be to transfer data. Correct me if I'm wrong.
I had several times repairing phone with broken micro usb connector, it has 5 pin to be soldering on it. 2 for the power and 3 for data transfer. If the cable is fine for other devices then maybe the problem is not from the cable itself. I had an experience like that case before that if the notification from the pc says connected device is malfunctioned, that may caused by when u first time connected the phone to the pc, the device is disconnected when it still trying to instal the driver. When u connected the phone to pc check on the device manager, if u see "!" icon there, then theres the problem, ur phone driver not installed properly, u can try manual instal of device driver from there.
Last usb device you connected malfunctioned. Windows does not recognise it
"USB device not recognized. The last USB device you connected to this computer malfunctioned, and Windows does not recognize it” always appears in Windows 10 and Windows 8.
And the reasons for the issue contains:
The currently loaded USB driver has become corrupted or unstable
USB drivers need to be updated
USB drive may be entering selective suspend
USB has some damaged files or bad sectors
USB drive has not been formatted correctly
For different reasons, you need to take different measure, but you can directly format it via AOMEI Partition Assistant to solve the usb device not recognize issue.
The USB port itself was damaged. So I got replacement and now the new phone works fine with same laptop. Thanks you all for your replies.