Hi,
I have a Galaxy Tab 10.1 GT-P7510
I Am running Build number HMJ37.UEKG4.P7510UEKG4
Kernel Version 2.6.36.3 [email protected] #1
I am not rooted.
Kies does detect my device but it gives no option to update firmware. When right-clicking on the device under "connected devices" the option to update firmware is greyed out.
Under "Current firmware version:" it says P7510UEKG4/P7510XARKG4/P7510UEKG4/P7510UEKG4.
Under "Latest firmware version:" it's blank...
Any ideas?
I just posted a topic few minutes earlier than you about the same issue...no idea why this is happening...
Did you ODIN any stock ROM before?
AFAIK you will get the update if you are in stock TW ROM (UEKME)
ansonantonym said:
Did you ODIN any stock ROM before?
AFAIK you will get the update if you are in stock TW ROM (UEKME)
Click to expand...
Click to collapse
I have ODIN'd a ROM before. I went back to stock last week... maybe that's why it isn't working?
I am a brand new user, both to the Tab and Android. My unit also fails to update. When attempting to do it via WIFI the update downloads but stops installing at 13%. When attached to Kies, I get the message that there are no updates available for the unit. Most of the other Kies functions also do not work.
I chatted online with Samsung and when this tech was stumped, was referred to a phone contact. The next tech also was stumped so I had to return the unit for repair. The good news is that unlike some companies, Samsung picked up the shipping. I should have my Tab back in a couple weeks. Hopefully in fully functional condition.
Stay tuned.
Bob
rudolphe said:
I have ODIN'd a ROM before. I went back to stock last week... maybe that's why it isn't working?
Click to expand...
Click to collapse
I believe you installed this "hc-3.1_ota-full_sam_tab_10.1.zip"
This is stock ROM for I/O tab only. And i/O tabs haven't got the TW or 3.2 update.
Flash stock ROM using ODIN as per the instructions in http://p7510.teamovercome.net/?page_id=18 under the section named "Re-“Stocking” Yer System…"
ROM : http://p7510.teamovercome.net/downloads/001002-P7510_KME_Restock.zip
ansonantonym said:
I believe you installed this "hc-3.1_ota-full_sam_tab_10.1.zip"
This is stock ROM for I/O tab only. And i/O tabs haven't got the TW or 3.2 update.
Flash stock ROM using ODIN as per the instructions in http://p7510.teamovercome.net/?page_id=18 under the section named "Re-“Stocking” Yer System…"
ROM : http://p7510.teamovercome.net/downloads/001002-P7510_KME_Restock.zip
Click to expand...
Click to collapse
Cool I'll give that a shot, that's exactly what I installed.
I'll update this thread if it works, thanks!!
Seems to be stuck in a boot loop now.
Gets to the Samsung animation and just restarts.
I already tried formatting system/data/cache via recovery menu. No luck
Any suggestions?
Same, sort of. I can't get any further than the boot logo, then just a blank screen.
Did you use the pit file?
rudolphe said:
Cool I'll give that a shot, that's exactly what I installed.
I'll update this thread if it works, thanks!!
Click to expand...
Click to collapse
ansonantonym said:
Did you use the pit file?
Click to expand...
Click to collapse
Yup, I figured it would be a good idea to just try it again now the download process gets to about 65% and just sits there...
ansonantonym said:
Did you use the pit file?
Click to expand...
Click to collapse
Me? If you meant me, I can't get to a place to do anything...can't get in to recovery, can't get to boot. I have an expensive, glowing paper weight.
ret4425 said:
Me? If you meant me, I can't get to a place to do anything...can't get in to recovery, can't get to boot. I have an expensive, glowing paper weight.
Click to expand...
Click to collapse
Try connecting it to Kies. I heard there is an emergency recovery functionality in it.
Ok, I'm back up and running now. I stopped using the crappy $5 extended charging cable I got off Amazon and used the cable that came with the device.
Can't be 100% sure if that's what fixed it but hey it worked... thanks again for all your support.
Instructions have also worked for me. I had previously rooted the tab and used Odin. Now it is stock TW 3.2 honeycomb.
How is it TW 3.2 if stock file you loaded is 3.1 ?
Hitec
Hitec Wireless said:
How is it TW 3.2 if stock file you loaded is 3.1 ?
Hitec
Click to expand...
Click to collapse
We were trying to get back to stock 3.1 so we could OTA/Kies update to the new 3.2.
ansonantonym said:
Try connecting it to Kies. I heard there is an emergency recovery functionality in it.
Click to expand...
Click to collapse
It won't connect, it just spins endlessly...is that about it? The power + volume button don't work, Kies don't work...that's it? It's just funked?
Does anybody have another link?
The mirror and the links on the website are saying the zip file is corrupt
Edit: nevermind my zip program was messing it up
Bootlooping
If you are still bootlooping, try clearing your cache and dalvik-cache. It worked for me. You need probably Clockworkmod for it.
Related
Does anyone know where to get the original ROM to reflash the tablet using ODIN 3? I'm stuck in boot loop and get even get back in the adb and really want to get back to stock. Thanks.
EDIT: outdated info
bcmobile said:
Not yet. Im uploading a system image which will fix your problem.
EDIT: Files have uploaded. Hit the dropbox link in my signature below and then PM me your dropbox email.
Click to expand...
Click to collapse
First thanks again for achieving root on the 10.1v .
Do you know if it is possible to flash a 10.1 rom onto the 10.1v ?
Thanks
appelflap said:
First thanks again for achieving root on the 10.1v .
Do you know if it is possible to flash a 10.1 rom onto the 10.1v ?
Thanks
Click to expand...
Click to collapse
No, someone already tried and failed. As far as the OS is concerned, they are much the same anyway. There should be a flood of custom ROMs coming over the next week or so. Best to wait for those.
bcmobile said:
No, someone already tried and failed. As far as the OS is concerned, they are much the same anyway. There should be a flood of custom ROMs coming over the next week or so. Best to wait for those.
Click to expand...
Click to collapse
Yeah I know. It should have been a easy way to get more locales on the tab 10 and to fix some bugs Anyway now there's root it should be easy to substitute some parts and apps with the 10.1 system dump
bcmobile, I also need original ROM to reflash the tablet using ODIN 3. I accidentally flashed 10.1v rom into the Google I/O tablet I have and usb no longer works.
Thanks for the img. How do I use this with Odin? I had 3 files to flash but this one has only the img file. I can only connect my Galaxy Tab through Odin. I does not get recognized by the pc and will not connect through adb.
bcmobile, Where can I find the image? Thanks!
I was trying to get into fastboot mode...but accidentally got into odin3 mode...
But I can't figure out how to exit out of it.
I did a search...and found out that there's an Odin3 software...but when I download and install it...I still don't see an "exit" or "quit" option for me to get out of the Odin3 Download Mode...
There's an "Auto Re-Boot" option...that's checked already...along with "F. Reset Time...if I just hit "Start"...is that okay to try to do? Thanks...
Update: Actually...nothing happens if I just hit "Start" with those options checked...I was hoping it would just reboot back to normal...
Do anyone know where I can find these images?
If you get stuck, this will bring you back
http://forum.xda-developers.com/showpost.php?p=14011086&postcount=26
Here's where I got the ODIN3 from http://forum.xda-developers.com/attachment.php?attachmentid=599054&d=1305645578
Did that work for the IO Tab, the P7510? It looks like that link is for a different model number.
Its for I/O tab. I got stuck and made it with a system dump from someone else. The boot logo is for 10.1v though but everything works fine. Only use if u get stuck in a loop. I had to manually flash 3.1 from Pershoots to update.
Sent from G2x
hey i tried this image but get write failed.
any other options that need selecting?
which version of odin are you using? could you pls link it?
thx.
same prob ^
this worked!
http://www.megaupload.com/?d=DDN6BYB2
It worked fine for me, are you guys using Odin 3?
Sent from my HTC Vision using Tapatalk
SS2006 said:
this worked!
i have tried using odin3 and it goes thru process but im still looping. also adb isnt reading my device so i cant adb reboot....
Click to expand...
Click to collapse
h t t p://jake-spencer.com/2011/06/recovering-encrypted-samsung-galaxy-tab-10-1/ is the solution right here. worked for me
deeemaa said:
SS2006 said:
this worked!
i have tried using odin3 and it goes thru process but im still looping. also adb isnt reading my device so i cant adb reboot....
Click to expand...
Click to collapse
I sent mine in. Samsung Level 3 support is what you need. Make sure you registered your device first.
Click to expand...
Click to collapse
For me Odin seems to be the only option as well as adb and fastboot dont recognise the tab.
When using odin I get either "write error" at the end of process if I try to send just the .tar.md5 file listed in first post, or, if I check repartition I get "error in line 1455" so I figure the next step will be repartition with a .pit file included as well...
Question is....which .pit to use - any solid fact or informed opinions from anyone much appreciated?
I am happy to be guinea pig as my tab is already "semi-bricked" and good for nothing and Samsung in France have said no service or guarantee available here, only in the USA....WTF!!?? So, I might just as well get reckless and see what happens...
As an aside......samfirmware?? is this now a pay service before one can download any firmwares? I see they have a GT-P7510 section indicated but inaccessible because of "webprotect". I am loathe to cough up the money for their "premium service" just to be able to enter the section and maybe find that they have nothing to offer....
I am not a leecher so will happily pay if they have something to offer, but will not pay just to see if that is the case...anybody got any info on what they have available?
Ta very much
bonzai3558 said:
Its for I/O tab. I got stuck and made it with a system dump from someone else. The boot logo is for 10.1v though but everything works fine. Only use if u get stuck in a loop. I had to manually flash 3.1 from Pershoots to update.
Click to expand...
Click to collapse
Thanks! I used ODIN3 (v1.00) to flash the image and successfully "unbricked" my tab which was previously stuck in a boot loop. Was pleasantly surprised to see that user data was preserved.
The OTA finally downloaded and now I just have to wait for the battery to recharge so it can apply the update...
bonzai your odin flashable md5 was awesome, can u make another one based on 3.1 please?
it would help this community alot
So I had flashed my n8013 to the Germany n8010 4.1.1 firmware using this:
http://forum.xda-developers.com/showthread.php?t=2048213
Then today I tried to restore back to UEALH2 n8013 stock:
http://forum.xda-developers.com/showthread.php?t=2100971
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue. I'm stuck on the Android screen with the blue orb and the blue status bar stuck somewhere around 25%. At one point I had it stuck on the pulsing SAMSUNG screen in what it seems like doing nothing. I've tried getting into recovery to do a factory reset and cache clear and when I do that and hit restart it doesn't restart. I've tried flashing the UEALH2 files again and right now the Android is where I am.
Can anyone save my skin please!!!
Here is what you do
Go into recovery do a complete wipe
Download the rom from here http://www.hotfile.com/dl/178484761/092fdea/N8013UEALI3_N8013XARALI3_XAR.zip.html
and Flash it with Odin, should work fine
vypor87 said:
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue. I'm stuck on the Android screen with the blue orb and the blue status bar stuck somewhere around 25%. At one point I had it stuck on the pulsing SAMSUNG screen in what it seems like doing nothing. I've tried getting into recovery to do a factory reset and cache clear and when I do that and hit restart it doesn't restart. I've tried flashing the UEALH2 files again and right now the Android is where I am.
Can anyone save my skin please!!!
Click to expand...
Click to collapse
Well if it's not doing anything leaving it stuck isn't going to help you. Unplug it and shut it off. Restart it in recovery by pressing power and volume up at the same time. Choose "wipe data/factory reset." That should get it back to a running state, probably the German ROM you were trying to replace. Someone posted a theoretic MD5 file of the whole new U.S. JB ROM. I haven't heard from anyone that's succefully installed it yet. I'd wait for the "all clear" before attempting to use it. In the meantime, assuming you're back on the German ROM after a reset, you're better off loading the U.S. ICS ROM via Odin and then use Kies to update to U.S. JB.
Check back in if the reset via recovery doesn't get your Note working again.
Can't reach stock recovery
Vol+ and Power only restarts it. It won't go into recovery. If i hold the power button it just restarts. I just need to get it charging and I don't know how. I don't have the german files on me at the moment.
vypor87 said:
Vol+ and Power only restarts it. It won't go into recovery. If i hold the power button it just restarts. I just need to get it charging and I don't know how. I don't have the german files on me at the moment.
Click to expand...
Click to collapse
Can you get in to download mode via "power/volume down?" If you can then just install the U.S ICS ROM to get back to a working device.
BarryH_GEG said:
Well if it's not doing anything leaving it stuck isn't going to help you. Unplug it and shut it off. Restart it in recovery by pressing power and volume up at the same time. Choose "wipe data/factory reset." That should get it back to a running state, probably the German ROM you were trying to replace. Someone posted a theoretic MD5 file of the whole new U.S. JB ROM. I haven't heard from anyone that's succefully installed it yet. I'd wait for the "all clear" before attempting to use it. In the meantime, assuming you're back on the German ROM after a reset, you're better off loading the U.S. ICS ROM via Odin and then use Kies to update to U.S. JB.
Check back in if the reset via recovery doesn't get your Note working again.
Click to expand...
Click to collapse
The first link was trying to use the US ICS Rom via Odin. My note won't get in a functional state either way
BarryH_GEG said:
Can you get in to download mode via "power/volume down?" If you can then just install the U.S ICS ROM to get back to a working device.
Click to expand...
Click to collapse
Barry, I used the preroot stock rom and the kernel as suggested in your OP on the other forum page. for some reason it's not working out well for me. I thought I had followed exactly what i should have
edit: sorry Barry I'm getting you confused with HG! in the other forum page.
vypor87 said:
Barry, I used the preroot stock rom and the kernel as suggested in your OP on the other forum page. for some reason it's not working out well for me. I thought I had followed exactly what i should have
Click to expand...
Click to collapse
That's swell. Can you get in to download mode?
BarryH_GEG said:
That's swell. Can you get in to download mode?
Click to expand...
Click to collapse
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
vypor87 said:
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
Click to expand...
Click to collapse
http://hotfile.com/dl/177432499/eb4...8013_XAR_1_20120918195236_k2xfp2k9el.zip.html
As long as you can get in to download mode you'll be fine. Just use Odin to get back to ICS and then Kies to update to JB. We can do a post-mortem to figure out what went wrong after you're off of Defcon 5. Nothing gets the heart rate up like potentially borking a $500 device.
vypor87 said:
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
Click to expand...
Click to collapse
Here is the official md5 file for the XAR N8013 Note 10.1: http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=XAR&os=1&type=3#firmware
Hope this helps.
BarryH_GEG said:
http://hotfile.com/dl/177432499/eb4...8013_XAR_1_20120918195236_k2xfp2k9el.zip.html
As long as you can get in to download mode you'll be fine. Just use Odin to get back to ICS and then Kies to update to JB. We can do a post-mortem to figure out what went wrong after you're off of Defcon 5. Nothing gets the heart rate up like potentially borking a $500 device.
Click to expand...
Click to collapse
K, downloading right now. I actually spent the $9 to get a month subscription to hotfile to download faster. Not helping much as it's not my best bandwidth but i hope it works!!
Holy s*** it's aaaaa-live!!! It's alive it's alive!!! DEF-CON lowered now. I had another UEALH2 rooted tar on my machine and I cannot remember which forum page I downloaded it from sadly. I had downloaded it back in August on the 24th. It's dated the 22nd of August. The other tar I downloaded was dated the 22nd also but it was different somehow. The name scheme on this one is UEALH2_rooted_system.tar and it worked. Unlike UEALH2_prerooted.tar. That one almost screwed me up! I need to find where this original file came from. Either way I'm back on ICS and plugged into a wall. It's taking me through all the initial setup crap right now so it's hard to tell how low I got it but I started this night flashing with about 56% battery. And when you start with half a battery you start regretting things shortly after when you botch something up big time!
Edit: BTW at no point during the "brick" did my tablet ever lose charge. Infact it even gain charge! I guess these tablets can pull charge in download mode or something. Either way I'm glad it's not almost to zilch!
Spoke too soon. This is the one where the touchscreen stops working. FML... Still downloading the HotFile link of the image Barry sent.
vypor87 said:
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue.
Click to expand...
Click to collapse
vypor87 said:
Edit: BTW at no point during the "brick" did my tablet ever lose charge. Infact it even gain charge! I guess these tablets can pull charge in download mode or something. Either way I'm glad it's not almost to zilch!
Click to expand...
Click to collapse
It gained charge because you had it plugged in, right? Sorry to here about your touchscreen :crying:. Hope All works out for you.
Edit:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
RandomAwesomeGuy said:
It gained charge because you had it plugged in, right? Sorry to here about your touchscreen :crying:. Hope All works out for you.
Edit:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
Click to expand...
Click to collapse
Well heres the worry about the charging I had. Motorola phones are not very forgiving to charge unless youre booted or on the battery charge screen. Thats why I was freaking out. I kies updated from that same botched image and it seemed to resolve my touchscreen issue. Time will tell. Only problem is now I forgot to protect root before the update so superuser doesnt know where to find the binaries. Does the CF Autoroot still work with 4.1.2? If so ill just use that.
Either way, enough problems cleared for one night. Im going to bed. Gotta wake up for work in the morning.
Sent from my GT-N8013 using xda premium
RandomAwesomeGuy said:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
Click to expand...
Click to collapse
Hopefully nothing. Mine's just the direct link to the Samsung-Updates upload. Where files exist in both places I post Samsung-Updates version because you don't need to register.
BTW thank you guys. It's always good to know that the community is looking out for each other. I think once I'm "100%" stock TriAway and all I ain't flashing to a different stock base again. Lol. Although I do like the stock German folders vs the crappy US ones that are literal folders that are ugly. Guess I need to find a new launcher. And Barry thanks for helping me enjoy 4.1.1 in the meantime!
Sent from my DROID RAZR using xda premium
Hi, I started a thread needing help with my wifi but it has developed into not even being able to boot at all; it stops at the galaxy logo and either freezes or keeps booting. I have gone to the Odin page with all the different things to do and flashed the file to get back to the original rom but that is really where the trouble began. right now the only thing I can do with my phone is get into download mode, I can't even get into recovery. I have flashed a pit file that worked the first time but I don't know if that is part of the problem or not. Can someone please give me some directions, thanks
Also the phone won't boot at all unless hooked up to a power supply, the battery alone doesn't do anything.
nate39 said:
Hi, I started a thread needing help with my wifi but it has developed into not even being able to boot at all; it stops at the galaxy logo and either freezes or keeps booting. I have gone to the Odin page with all the different things to do and flashed the file to get back to the original rom but that is really where the trouble began. right now the only thing I can do with my phone is get into download mode, I can't even get into recovery. I have flashed a pit file that worked the first time but I don't know if that is part of the problem or not. Can someone please give me some directions, thanks
Click to expand...
Click to collapse
More info is needed. What firmware / bootloader are you on? Was it rooted? Did you have a custom recovery installed? What version of ODIN are you using?
StoneyJSG said:
More info is needed. Which GS3 do you have? What firmware / bootloader are you on? Was it rooted? Did you have a custom recovery installed? What version of ODIN are you using?
Right now, it sounds like you might need to use enewman17's ODIN debrick file.
Click to expand...
Click to collapse
It is the AT&T s4. To be honest I don't know what firmware I am on, it is the one the Odin page said to use if you want to go back to stock. I never rooted it. The bootloader would be whatever the latest update was for this phone. I can't get into it to tell you anymore. I am using ODIN 10, the latest one. thanks
Well I finally got into recovery and did a factory reset, now it boots into the AT&T white splash screen before it just turns off. I am also wondering if my battery just died for some reason?
nate39 said:
It is the AT&T s4. To be honest I don't know what firmware I am on, it is the one the Odin page said to use if you want to go back to stock. I never rooted it. The bootloader would be whatever the latest update was for this phone. I can't get into it to tell you anymore. I am using ODIN 10, the latest one. thanks
Click to expand...
Click to collapse
ODIN 10? Try using ODIN 3.09 and see if that helps. The latest update would be Android 4.4.4 NJ4 firmware. This link should help you, it will give you root with safe strap recovery though: http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
I meant 3.10, I will try the older version. What file should I flash?
nate39 said:
I meant 3.10, I will try the older version. What file should I flash?
Click to expand...
Click to collapse
Check out the link I posted in my last post. It should help you get your phone fixed.
I have been there. I went to the very last option which seems to be what I need unless I am missing something.
Neither odin 3.09 or 3.10 will even flash any file now. it either says invalid md5 or fails when it attempts it.
Well, I finally got it to boot into android but it is flaky at best. It is android 4.3 instead of 4.4 where it was initially. The wifi still doesn't work and now the keyboard keeps crashing everytime I do something. The build is jss15j1337ucuemk2 which I know is older than I had before. Does this give anyone a better idea of what I need to do? If I can get a stable flash then can I flash a modem file to fix the wifi? I really need some direction, thanks
Turns out the battery was completely drained which was causing some of the boot problems, I don't now how that happened but I am charging it now.
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
nate39 said:
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
Click to expand...
Click to collapse
If I were in your shoes I'd flash the nb1 tar file in Odin, any vein should work. See this for the tar file http://forum.xda-developers.com/showthread.php?p=56453100. You can then ota to the latest firmware which is 4.4.4, nj4
Sent from my Nexus 9 using XDA Free mobile app
thanks, and as far as you know this doesn't mess wifi up?
nate39 said:
thanks, and as far as you know this doesn't mess wife up?
Click to expand...
Click to collapse
I assume you ment WiFi and not wife? Can't help you with the wife but Wi-Fi should work fine
Sent from my Nexus 9 using XDA Free mobile app
nate39 said:
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
Click to expand...
Click to collapse
Download a firmaware for your region from sammobile and flash it via odin 3.10. It will solve most of your problems
Muthumbi said:
Download a firmaware for your region from sammobile and flash it via odin 3.10. It will solve most of your problems
Click to expand...
Click to collapse
Sammobile isn't going to have anything for the i337 unless you're on mdl
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Sammobile isn't going to have anything for the i337 unless you're on mdl
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I agree. But google has basically all he needs. More so rapidgator
I haven't found anything from Samsung to download. If I flash a newer build, do I also need to flash a modem file and a bootloader or can I just flash the PDA? thanks for explaining this to me.
And can I do a dirty flash so I don't have to lose everything again?
well, now I see that there is no sound. so I guess I will have to flash again.
nate39 said:
well, now I see that there is no sound. so I guess I will have to flash again.
Click to expand...
Click to collapse
There's. Something I'm yet to understand. Did you finally manage to boot into recovery? If so, flash a custom recovery (I recommend philz touch recovery) then use it to make complete wipe.
Then boot into download mode and flash latest pda firmware in the compressed file you downloaded. Ps: make sure it's from your region.
May be if you provided me with your region I'd get you all the files required
Just got November ota update in 60mb i am just curious to know if it is gonna lock the bootloader.
UPDATE-/ BOOTLOADER STILL UNLOCKED I TESTED & DOWNGRADED TO 5.1.1 OK1 .
I just received it as well. I use my phone for work so it's encrypted but could you try to downgrade and let's us know what happened
Yes, you can still downgrade to 4.4.4 with the new update
This update should give me enough time to read the details of the update before it reboots my phone in the 25 seconds. At that point, we don't have the ability to "abort" or decline the agreement anyway.
Note 4 tmo, downloads the 60mb update, phone enters recovery mode then i get "update failed phone will recover the original configuration" .
I'm full stock, no root, no custom recovery no nothing. Anyone could help me?
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
enian.doda said:
Note 4 tmo, downloads the 60mb update, phone enters recovery mode then i get "update failed phone will recover the original configuration" .
I'm full stock, no root, no custom recovery no nothing. Anyone could help me?
Click to expand...
Click to collapse
I encountered the same error last night. I held POWER + VOLUME DOWN to boot into Recovery mode, then I rebooted to System. My phone went through the app optimization process (you know, the screen that you'd see after wiping the Cache/Dalvik Cache).
I assumed that the update failed, but when I checked "About Device," I noticed that it now has the November 1, 2016 security patch (Baseband Version N910TUVS2EPK2).
Anonymously_Unknown said:
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
Click to expand...
Click to collapse
ru_benz said:
I encountered the same error last night. I held POWER + VOLUME DOWN to boot into Recovery mode, then I rebooted to System. My phone went through the app optimization process (you know, the screen that you'd see after wiping the Cache/Dalvik Cache).
I assumed that the update failed, but when I checked "About Device," I noticed that it now has the November 1, 2016 security patch (Baseband Version N910TUVS2EPK2).
Click to expand...
Click to collapse
Sadly mine didn't, as it gave the update failed it reboot normally without app optimization, checked about phone, no changes.
I gave up and updated through Smart Switch... althought the "dm-verification " error still present.
enian.doda said:
Sadly mine didn't, as it gave the update failed it reboot normally without app optimization, checked about phone, no changes.
I gave up and updated through Smart Switch... althought the "dm-verification " error still present.
Click to expand...
Click to collapse
How do u update firmware through smart switch
Sent from my SM-N910T using XDA-Developers mobile app
Anonymously_Unknown said:
This update should give me enough time to read the details of the update before it reboots my phone in the 25 seconds. At that point, we don't have the ability to "abort" or decline the agreement anyway.
Click to expand...
Click to collapse
I noticed it said something about gear3 and RCS messaging system. Didn't have time to read the rest of the change log
SelfElevated2 said:
How do u update firmware through smart switch
Sent from my SM-N910T using XDA-Developers mobile app
Click to expand...
Click to collapse
With phone ON, connect phone to pc through usb, amart switch will tell you automatically THERE'S AN UPDATE AVAILABLE.
Full rom n910tuvs2epk2
Anonymously_Unknown said:
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
Click to expand...
Click to collapse
I just download this from sammobile. Just want to share it...use at your own risk. https://mega.nz/#!oMdHRYaa!vRIN02PsMG6ozSeiRRJ-OBWf0a88x7gVo768my7wpO8
murayoshi said:
I just download this from sammobile. Just want to share it...use at your own risk. https://mega.nz/#!oMdHRYaa!vRIN02PsMG6ozSeiRRJ-OBWf0a88x7gVo768my7wpO8
Click to expand...
Click to collapse
Thanks for sharing
Did you tested it ?
Trex888 said:
Thanks for sharing
Did you tested it ?
Click to expand...
Click to collapse
You're welcome. Not yet because i am in the middle of setting up RamRom when I download it. I am still playing with it. Probably later
murayoshi said:
You're welcome. Not yet because i am in the middle of setting up RamRom when I download it. I am still playing with it. Probably later
Click to expand...
Click to collapse
I flashed the rom through odin, all good.
Still, dm-verification error hunts my phone when entering recovery.
Still no one has a solution to the dm error?
enian.doda said:
I flashed the rom through odin, all good.
Still, dm-verification error hunts my phone when entering recovery.
Still no one has a solution to the dm error?
Click to expand...
Click to collapse
To get rid of it flash custom recovery.
Trex888 said:
To get rid of it flash custom recovery.
Click to expand...
Click to collapse
This thing is i wanted a full stock rom, so to be able to update ota as soon as available.
Custom recovery doesnt offer that.
enian.doda said:
This thing is i wanted a full stock rom, so to be able to update ota as soon as available.
Custom recovery doesnt offer that.
Click to expand...
Click to collapse
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Trex888 said:
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Click to expand...
Click to collapse
Well, I also used odin until now. The fact that you tell me there's no "working method " assures me that you made your searches like I did and found nothing.
Trex888 said:
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Click to expand...
Click to collapse
I have custom ROM and Custom Recovery TWRP.
Will updating the Modem and Bootloader cause me to have to reinstall the ROMS?
Thanks in advance