Database Users

[Q] defy stuck at motorola boot screen after flash

i flash my phone with a custom rom from this forum
succesfull until RSD Lite step
after RSD Lite, my phone stuck at Motorola logo with blur
tried pull off and pulling on the batery with power and volume up, it got back to bootloader screen
try aother RSD Power, it is still the same
Progress till 100 persen, but the phone stucked at motorola blur logo
any solution, guys?
thanks

What were you trying to flash?

I try to upgrade to froyo.
it stuck after RSD Lite step

Well first, is your phone rooted? Secondly, what stock version did you have?
I think I can get you up and running with Froyo

you may try to install your original version/build number sbf. if its work, maybe you can try flash froyo ROM again. then when you finished restore custom ROM all you have to do is go to bootloader then flash boot/devtree only sbf.. dont pull usb connection. but if RSD want you to turn phone manually then you need to press power button even though your phone at booting state..

i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur

FL4M3K1NG said:
i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur
Click to expand...
Click to collapse
did you find fix?

What SBF file did you use?
Have you tried another file?

get into stock recover (Vol Up + Power) then wipe data/cache

Half Bricked
I have an Mb525 rooted (that was) running stock 2.2 Blurred. I installed the Defy boot loader and hard reset/wiped partitions and (tried to) install cm7 from SD, it installs fine, goes fine, everything is all set. Reboot the device and the splash image pops up with the white LED first, then the blue one for boot loader, and finally the green one. It stays on splash screen. I tried 2 different versions of cm7 and both do the same thing. I'm able to access the boot loader, it just doesn't finish loading whatever I flash onto it.
As my phone is dysfunctional, I would appreciate it if you could contact me through my Skype;
kurtdunsmore
I won't receive emails.. =/
Specs:
Moto Defy shipped with 2.1
Rooted
Red Lense
T-Mobile, U.S.A.
Please let me know if any other information would be helpful.

tendyfish said:
get into stock recover (Vol Up + Power) then wipe data/cache
Click to expand...
Click to collapse
to go in stock recovery u must use Vol Down + Power

Solution
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.

aed0101 said:
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.
Click to expand...
Click to collapse
This worked perfectly well. Thank you.
Andy

[Q] Defy stuck on Motorola's logo and can't access the recovery mode

Hello guys, first, sorry for my bad english.
I'm having some problems with my defy, I was using the CM7 for months but now it start to stuck on Motorola's logo and when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
So I tried to flash a old SBF that I have here, but, when the device will start again, it stuck on Motorola's logo again.
Then I downloaded a SBF that seems to be the "original of my phone version" and flashed it, but the device stills stucking at the Motorola's logo.
I think that I need to wipe data/cache, but how?!?
Any advices??
I need my phoneee!!

again flash with nodric ram

moji7 said:
again flash with nodric ram
Click to expand...
Click to collapse
Sorry, I don`t understand

He is saying you should start over and flash the Nordic SBF again.
But it would be helpful to know which SBF's you've tried which didn't work. What RSD lite version you are using? I'm using RSD Lite 5.3.1 and the 5.1.0 motorola driver and never had issues.
Don't forget to "wipe data/factory reset" and "wipe cache" in Stock Recovery (power + vol down) before flashing.
Also, what did you do before CM7 stopped working. It doesn't break for no reason.

twa_priv said:
He is saying you should start over and flash the Nordic SBF again.
But it would be helpful to know which SBF's you've tried which didn't work. What RSD lite version you are using? I'm using RSD Lite 5.3.1 and the 5.1.0 motorola driver and never had issues.
Don't forget to "wipe data/factory reset" and "wipe cache" in Stock Recovery (power + vol down) before flashing.
Also, what did you do before CM7 stopped working. It doesn't break for no reason.
Click to expand...
Click to collapse
Im using RSD lite 4.9 and I don't know the version of the drivers...
And I could not wipe data/cache because I could not access the stock recovery
when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
Click to expand...
Click to collapse

To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.

twa_priv said:
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
Click to expand...
Click to collapse
I already tried it, but i can't acces the stock recovery!
pituca292 said:
Hello guys, first, sorry for my bad english.
I'm having some problems with my defy, I was using the CM7 for months but now it start to stuck on Motorola's logo and when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
So I tried to flash a old SBF that I have here, but, when the device will start again, it stuck on Motorola's logo again.
Then I downloaded a SBF that seems to be the "original of my phone version" and flashed it, but the device stills stucking at the Motorola's logo.
I think that I need to wipe data/cache, but how?!?
Any advices??
I need my phoneee!!
Click to expand...
Click to collapse

Sorry, missed that part.
Well ... I don't recall reading about such behaviour before - unless the battery is dead.
But then you wouldn't be able to get the bootloader either.
I would try again to get into recovery and make sure you press the power + vol up buttons for a few seconds before releasing.
And out of curiosity: what exactly did you do when CM7 stopped working. It doesn't break for no reason.

twa_priv said:
Sorry, missed that part.
Well ... I don't recall reading about such behaviour before - unless the battery is dead.
But then you wouldn't be able to get the bootloader either.
I would try again to get into recovery and make sure you press the power + vol up buttons for a few seconds before releasing.
And out of curiosity: what exactly did you do when CM7 stopped working. It doesn't break for no reason.
Click to expand...
Click to collapse
I tried to enter in the recovery mode a lot of times and nothing!
I didn't done anything diferent that could make CM7 stop, it stopped by itself!

Guys, I'm thinking in send it to a techinical support, of Motorola.
What do you think?

twa_priv said:
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
Click to expand...
Click to collapse
You are a life saver!
-----------
I got a similar situation as our friend here. Today I had shutdown my Defy (rooted + stock 2.2.1) when i tried to turn It on again It got stuck at the operator logo forever!
I did the clear data from recovery and I got my cellphone back to live. Thanks!

Im Stuck too...
I have a problem with my Defy MB525, This morning I woke up and found the cell with the Android Logo with Exclamation, it was really hot so I turn off pulling the battery.
Then I tried to power ON but still stuck on Motorola's logo, in trying to enter the recovery (Pressing vol+ and Power but nothing, same pressing vol-).
the strangest of all is that my Defy don't display the white led, so it's not charging?
As far as I was to the symbol of android with red exclamation, I tried pressing the volume buttons but none served.
I was looking in other threads but nothing helps me, can you help me please? thanks.

[Q] Please help- defy stuck at red moto logo-recovery not showing full menu

hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?

Do not worry!
cute_kayani said:
hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Click to expand...
Click to collapse
Hello there!
As you mentioned that you are not able to see other Recovery options like "Install from zip" etc. This is because you must be booting your phone into the Stock Recovery. For those extra options to come up we need to boot the phone into the Custom Recovery.
To boot into Custom Recovery:
1. Press power on button;
2. Notice when the LED light blinks "BLUE" color; press both the volume keys this time;
3. Now it should show you Custom Recovery options this time;
4. Select "Install from Zip" and flash the ROM you were trying to flash (Also refer to the ROM info if that has some special installation steps).
If the above steps does not resolves the issue then you can always flash you phone with the Stock ROM found in the following article named as SBF:
http://forum.xda-developers.com/showthread.php?t=1216982
[Note: Above mentioned article has all the information that a defy user needs. Thanks "Zephyrot" for that wonderful article.]
Hope that helps!
Good Luck!!

there is no blue led, when press power button it stuck on red moto logo..
and when press both vol down and power it goes into recovery with limited options.
can it is possible i put rom into sd card and rename it with Update.zip and then in recovery use it with update zip..
or any other solution
Thanks

cute_kayani said:
hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Click to expand...
Click to collapse
I guess you'd charge your phone first then wait for a while,

cute_kayani said:
there is no blue led, when press power button it stuck on red moto logo..
and when press both vol down and power it goes into recovery with limited options.
can it is possible i put rom into sd card and rename it with Update.zip and then in recovery use it with update zip..
or any other solution
Thanks
Click to expand...
Click to collapse
I'm disappointed to know that you are still facing the same issue. Also, renaming the file to update.zip will not let you flash it.
As suggested above first recharge your battery for a while and then flash with appropriate SBF of your region using RSD Lite. Refer to the above given link it has all the information. Also, note that if you flash with any particular android version SBF (which is not a fixed SBF) then you will not be able to downgrade (above article has all info).
Hope this helps!
Good Luck!

Okay, thanks for all.. this is the T Mobile Uk version and i got it with eclair rom, and than updated with orignal T mobile froyo.
Now i should start from froyo or eclair?

cute_kayani said:
Okay, thanks for all.. this is the T Mobile Uk version and i got it with eclair rom, and than updated with orignal T mobile froyo.
Now i should start from froyo or eclair?
Click to expand...
Click to collapse
You may use any ROM either Froyo or Eclair. Please also check the downgradilbility of the ROM. As in many of the cases if the ROM is not fixed then switching back to the earlier versions is impossible without having the Nandroid backup. I suggest you to use the version which is officially released in your region.
ROMs can be downloaded from the below mentioned link:
http://and-developers.com/sbf:defy
Complete information about various SBFs at:
http://forum.xda-developers.com/showthread.php?t=966537
Hope this helps!
Happy Flashing!

i flash it with JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
and i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
what is this?
but when i connect usb ,rsd detect it..but this time no white led also.

I again flash it with JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Service1FF.sbf
successfully passed and message pop for reboots,but still black screen.

Rajneeshgadge17 said:
Hello there!
As you mentioned that you are not able to see other Recovery options like "Install from zip" etc. This is because you must be booting your phone into the Stock Recovery. For those extra options to come up we need to boot the phone into the Custom Recovery.
To boot into Custom Recovery:
1. Press power on button;
2. Notice when the LED light blinks "BLUE" color; press both the volume keys this time;
3. Now it should show you Custom Recovery options this time;
4. Select "Install from Zip" and flash the ROM you were trying to flash (Also refer to the ROM info if that has some special installation steps).
If the above steps does not resolves the issue then you can always flash you phone with the Stock ROM found in the following article named as SBF:
http://forum.xda-developers.com/showthread.php?t=1216982
[Note: Above mentioned article has all the information that a defy user needs. Thanks "Zephyrot" for that wonderful article.]
Hope that helps!
Good Luck!!
Click to expand...
Click to collapse
Tnx for post guy

Palestrino said:
Tnx for post guy
Click to expand...
Click to collapse
Thanks,
I tried but there was no blue led and flash it two time but now black screen is the hurdle.
please tell how to pass this.
While flashing there was message for successful status, and reboot but now when i press power button nothing happen. And neither goes into boot loader or recover.
Only RSD detects my phone for flashing, otherwise its complete dead....
ohhhoooooo MIUI Rom You ruined my DEFY (

cute_kayani said:
i flash it with JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
and i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
what is this?
but when i connect usb ,rsd detect it..but this time no white led also.
Click to expand...
Click to collapse
cute_kayani said:
I again flash it with JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Service1FF.sbf
successfully passed and message pop for reboots,but still black screen.
Click to expand...
Click to collapse
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!

Thanks Rajneeshgadge17..
When i press these buttons nothing is happening. and i charge up battery with universal charger, don't know what is wrong.
only RSd detect my phone when i plugin USB.. otherwise it seems completely dead.

can somebody help........

cute_kayani said:
can somebody help........
Click to expand...
Click to collapse
Refer this post = http://forum.xda-developers.com/showpost.php?p=24205029&postcount=2

What if I have balck screen in recovery mode as well?
Do you have any idea how to solve the same problem if the recovery mode does not start neither? Only RSDLite sees that the phone is connected. I can refresh the ROM but I did not find the right .sbf file yet. Do you know maybe which one would bring back the phone from death?
Thank you in advance!!
Rajneeshgadge17 said:
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Click to expand...
Click to collapse

Ryaren said:
Do you have any idea how to solve the same problem if the recovery mode does not start neither? Only RSDLite sees that the phone is connected. I can refresh the ROM but I did not find the right .sbf file yet. Do you know maybe which one would bring back the phone from death?
Thank you in advance!!
Click to expand...
Click to collapse
Try to find the latest stock rom from your region... and match with ur defy type... flash with rsd that would bring ur defy back
Sent from my XT535 using xda premium

Doesn't work for me
Rajneeshgadge17 said:
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Click to expand...
Click to collapse
Unfortunately it doesn’t work for me, my defy doesn’t react for any key combination. RSD Lite still discovers it I can flash any sbf’s. But I’m still getting black screen. The problem is that I don’t know which sbf I should use… Please help. I know I can’t brick defy but if I don’t know how to get back I’m almost there… 

0lsztyN said:
Unfortunately it doesn’t work for me, my defy doesn’t react for any key combination. RSD Lite still discovers it I can flash any sbf’s. But I’m still getting black screen. The problem is that I don’t know which sbf I should use… Please help. I know I can’t brick defy but if I don’t know how to get back I’m almost there… 
Click to expand...
Click to collapse
It seems an issue with the Kernel. May be you are flashing the Green lense Defy (MB525) with GB kernel (i.e. MB526 sbf).
Also check the Bootloader version and which Android version you were using.
Here is a list of all the SBF's for both versions:
http://forum.xda-developers.com/showthread.php?t=966537
Hope this helps.
PS:- I don't use Defy for a year now as I own a Nexus 4.

[Q] From cm7 (kernel froyo) to cm10

Hi guys,
i have a milestone2 with cm7-tezet and i want upgrade to cm10 tezet. I read the installation guide, but i have not understand one step; i quote:
"Ensure you have GB kernel flashed. If you are upgrading from CM9, there's nothing you need to do. If you are upgrading from my CM7 ROM, flash kernel from this image first."
how i flash with new kernel?
reboot my milestone2 in recovery mode
go to "install zip from sd card"
select the new kernel
then? i must reboot or not?
the recovery mode not change with a new kernel?
thank you!

ipumba said:
Hi guys,
i have a milestone2 with cm7-tezet and i want upgrade to cm10 tezet. I read the installation guide, but i have not understand one step; i quote:
"Ensure you have GB kernel flashed. If you are upgrading from CM9, there's nothing you need to do. If you are upgrading from my CM7 ROM, flash kernel from this image first."
how i flash with new kernel?
reboot my milestone2 in recovery mode
go to "install zip from sd card"
select the new kernel
then? i must reboot or not?
the recovery mode not change with a new kernel?
thank you!
Click to expand...
Click to collapse
Go into bootmenu, custom recovery.
Flash kernel, flash cm10, flash google apps.
Wipe data/factory reset
Reboot phone
Enjoy CM10.

Lean946 said:
Go into bootmenu, custom recovery.
Flash kernel, flash cm10, flash google apps.
Wipe data/factory reset
Reboot phone
Enjoy CM10.
Click to expand...
Click to collapse
all ok!
i follow your step and now i have cm10! thank you

installed the kernel
Hi!
I upgraded my milestone 2, from Gingerbread to CM 10.
It worked fine for a week.
today i was playing with it to install Google Apps, and accidentally installed kernel files which i got from this website.
now my milestone cannot turn on, and I am left without a phone
Can anybody help me?!

tirona said:
Hi!
I upgraded my milestone 2, from Gingerbread to CM 10.
It worked fine for a week.
today i was playing with it to install Google Apps, and accidentally installed kernel files which i got from this website.
now my milestone cannot turn on, and I am left without a phone
Can anybody help me?!
Click to expand...
Click to collapse
Look for an SBF corresponding to the android version you had before CM10 here: http://and-developers.com/sbf:milestone2
And download it from here: http://sbf.droid-developers.org/umts_milestone2/list.php
Follow steps here: http://forum.xda-developers.com/showthread.php?t=1032372 in order to restore your phone.
Instead of pressing @ in step 9, you need to press both volume buttons.
Hope it helps.

Lean946 said:
Look for an SBF corresponding to the android version you had before CM10 here: http://and-developers.com/sbf:milestone2
And download it from here: http://sbf.droid-developers.org/umts_milestone2/list.php
Follow steps here: http://forum.xda-developers.com/showthread.php?t=1032372 in order to restore your phone.
Instead of pressing @ in step 9, you need to press both volume buttons.
Hope it helps.
Click to expand...
Click to collapse
thank you!
but RSD Lite is not yet available for download.
and the steps that the guy is explaining cannot be followed, cause my phone is completely dead.
it is off, and when trying to turn it on, it show the Motorola logo for 2 seconds and than disappears. the display of the phone remains powered but nothing happesn in there.
p.s. i can still go to root menu, by pressing and holding X + power button, and than X + Volume UP.
But with the reset data (wiping data / factory reset) nothing happens.
so still in dakr

When your device is off press On/Off button, vol +/- and the camera button.
Then you come to the bootloader. With RSD you can flash it.

FloOsen said:
When your device is off press On/Off button, vol +/- and the camera button.
Then you come to the bootloader. With RSD you can flash it.
Click to expand...
Click to collapse
I did everything in the right way.
i went into but menu (as it is described)
everything was executed smoothly with rsd lite. (i executed this file: 332.0 MiB 93F0ED6430C13DA551F984701D8C8C72 Retail Italian MILS2_U6_2.4.24_SIGNED_USAMILESTONE2B1B8RTIT00E.0R_USXMILE20RTIT_P030_A010_HWp2a_Service1FF.sbf.gz - because i bought in italy my phone)
but the phone is not starting up. and is not giving any sign (before it was showing the motorola logo for 2 seconds)
i cannot make any start using different kind of hard buttons combinations, like : X + power button, Camera + volume+ + power button, with or without USB cable try)
There is no sign of life from my phone
?!?!?!?!?!

tirona said:
I upgraded my milestone 2, from Gingerbread to CM 10.
Click to expand...
Click to collapse
tirona said:
(i executed this file: 332.0 MiB 93F0ED6430C13DA551F984701D8C8C72 Retail Italian MILS2_U6_2.4.24_SIGNED_USAMILESTONE2B1B8RTIT00E.0R_USXMILE20RTIT_P030_A010_HWp2a_Service1FF.sbf.gz - because i bought in italy my phone)
but the phone is not starting up. and is not giving any sign (before it was showing the motorola logo for 2 seconds)
i cannot make any start using different kind of hard buttons combinations, like : X + power button, Camera + volume+ + power button, with or without USB cable try)
There is no sign of life from my phone
?!?!?!?!?!
Click to expand...
Click to collapse
I think that, you chose wrong version of SBF...
look at this http://forum.xda-developers.com/showpost.php?p=19877027&postcount=386

henediac said:
I think that, you chose wrong version of SBF...
look at this http://forum.xda-developers.com/showpost.php?p=19877027&postcount=386
Click to expand...
Click to collapse
Hi!
this mate is explaining: "so i pulled out battery, pressed volDown + shutter and placed battery in, display remined black. But when I connected it to PC, and tried to flash with sbf_flash and (linux version of RSDlite) and (1) - it succed "
I tried also like him, but to my phone nothing happened....
?!!!!!?!?!?!?!!

[Q] I think that I really broke my defy (MB525)

Help me, please!
Yesterday, I wanted to make a clean install for the latest Quarx's CM 10.1 nightly (I've been flashing Quarx's builds for almost a year now, he's The Best), but I think I made a terrible mistake.
When I wanted to make a factory reset, I've got this error because the sd-ext, I understand, that happened because TWRP's structure with almost all devices running Android 4.2.2 have a virtual-sd and a sd-ext, so I decided to make an Advance wipe and I every damn box, even wipe system and wipe sd card.
Finally when I rebooted my phone, TWRP asked to install SU, I pressed yes.
Then when my phone was rebooting, I've got this error:
Bootloader
09.10
Err:A5,70,39,00,27
So, I've been flashing Froyo's .sbfs since yesterday, when I get pass verification from RSDLite and rebooted the phone, it just keep bootlooping, I left it almost 15 minutes and still in Froyo's bootanimation, I know it has to do because it's needed wipe data and cahe, but I can't do that because I can't access stock recovery (volume down+power button), I just get the triangle with the little Android in it.
Here's is the .sbf
JORLA_U3_3.4.2_108-5_SIGNED_USAJORDMR1B25CLALALA022.0R_JORLAFROCLALALA_P027_A018_M016_HWp3_WIG147154_Service1FF.sbf.gz
And I did it with RSDLite 5.6.
Hope you can help me, thanks anyway.

On Stock Recovery press Vol-up+down buttons... Rooting & flashing custom roms & don't know how to enter stock recovery?

turffe said:
On Stock Recovery press Vol-up+down buttons... Rooting & flashing custom roms & don't know how to enter stock recovery?
Click to expand...
Click to collapse
Thank you very much yo solve my problem.
My bad for not knowing how to enter stock recovery.

Bootmenu
turffe said:
On Stock Recovery press Vol-up+down buttons... Rooting & flashing custom roms & don't know how to enter stock recovery?
Click to expand...
Click to collapse
I am new to the Defy, but managed to root and move to CM7 and all seems good. I just wondered if there is a version of bootmenu that uses touch screen rather than volume and power buttons? I thought one of the ICS ROMS had a touch screen recovery, but maybe I am thinking of HTC.
Thanks.

tomlogan1 said:
I am new to the Defy, but managed to root and move to CM7 and all seems good. I just wondered if there is a version of bootmenu that uses touch screen rather than volume and power buttons? I thought one of the ICS ROMS had a touch screen recovery, but maybe I am thinking of HTC.
Thanks.
Click to expand...
Click to collapse
Latest CM10 and CM10.1 have a touch bootmenu, even the latest CM 10.1 has TWRP 2.5 that it's a touch custom recovery.

Bootmenu 2
soyusado said:
Latest CM10 and CM10.1 have a touch bootmenu, even the latest CM 10.1 has TWRP 2.5 that it's a touch custom recovery.
Click to expand...
Click to collapse
Thanks for your reply.
I prefer CWM to TWRP, but is there a way to get the more advanced bootmenu 2 and keep CWM? Sndinitdefy seems to only have the recovery using the volume controls and power button.
Thanks.

tomlogan1 said:
Thanks for your reply.
I prefer CWM to TWRP, but is there a way to get the more advanced bootmenu 2 and keep CWM? Sndinitdefy seems to only have the recovery using the volume controls and power button.
Thanks.
Click to expand...
Click to collapse
I think Quarx merged that bootmenu when he started to make his 2ndboot nightlies for CM10, but I don't know how to install it separately from his .zip files, you should download some of the latest ROMs a see if you could merge the bootmenu to CM7.

where are you download this Froyo's .sbfs?
soyusado said:
Help me, please!
Yesterday, I wanted to make a clean install for the latest Quarx's CM 10.1 nightly (I've been flashing Quarx's builds for almost a year now, he's The Best), but I think I made a terrible mistake.
When I wanted to make a factory reset, I've got this error because the sd-ext, I understand, that happened because TWRP's structure with almost all devices running Android 4.2.2 have a virtual-sd and a sd-ext, so I decided to make an Advance wipe and I every damn box, even wipe system and wipe sd card.
Finally when I rebooted my phone, TWRP asked to install SU, I pressed yes.
Then when my phone was rebooting, I've got this error:
Bootloader
09.10
Err:A5,70,39,00,27
So, I've been flashing Froyo's .sbfs since yesterday, when I get pass verification from RSDLite and rebooted the phone, it just keep bootlooping, I left it almost 15 minutes and still in Froyo's bootanimation, I know it has to do because it's needed wipe data and cahe, but I can't do that because I can't access stock recovery (volume down+power button), I just get the triangle with the little Android in it.
Here's is the .sbf
JORLA_U3_3.4.2_108-5_SIGNED_USAJORDMR1B25CLALALA022.0R_JORLAFROCLALALA_P027_A018_M016_HWp3_WIG147154_Service1FF.sbf.gz
And I did it with RSDLite 5.6.
Hope you can help me, thanks anyway.
Click to expand...
Click to collapse
i do the same step to my defy and now i face the same problem .i think you have salve this problem .but i can't find the this file :JORLA_U3_3.4.2_108-5_SIGNED_USAJORDMR1B25CLALALA022.0R_JORLAFROCLALALA_P027_A018_M016_HWp3_WIG147154_Service1FF.sbf.gz
can you gave me a download adress? i am a chinese and have poor english level ,can you tell me the way you fix your phone step by step? think you !

This thread should help (http://forum.xda-developers.com/showthread.php?t=1216982), in there you'll be able to find everything you need to fix your phone.
First download RSDLite, then search for a sbf suitable for your country.
Then flash it, you need to have Motorola drivers installed and plug the phone on bootloader mode (press volume up+power button), you have to paste the sbf file you extracted in the RSDLite folder, then just execute it and browse the sbf file, finally press flash and wait.
When you read "please start your phone manually" or something like that, disconnect your phone, remove the battery for five seconds then start it on bootloader mode and plug it.
Your phone should boot to Android.
If you get stuck on bootanimation, wipe data and cache from stock recovery (volume down+power button, when you see the triangle press volume volume up+volume down).
Your phone is ready to go now.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app

think you so much
soyusado said:
This thread should help (http://forum.xda-developers.com/showthread.php?t=1216982), in there you'll be able to find everything you need to fix your phone.
First download RSDLite, then search for a sbf suitable for your country.
Then flash it, you need to have Motorola drivers installed and plug the phone on bootloader mode (press volume up+power button), you have to paste the sbf file you extracted in the RSDLite folder, then just execute it and browse the sbf file, finally press flash and wait.
When you read "please start your phone manually" or something like that, disconnect your phone, remove the battery for five seconds then start it on bootloader mode and plug it.
Your phone should boot to Android.
If you get stuck on bootanimation, wipe data and cache from stock recovery (volume down+power button, when you see the triangle press volume volume up+volume down).
Your phone is ready to go now.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
thank you,perhaps it will work , but i don't know my defy produced by which country , can i use the other country's sbf ?

Yong-Zhi Lee said:
thank you,perhaps it will work , but i don't know my defy produced by which country , can i use the other country's sbf ?
Click to expand...
Click to collapse
It's not the country your Defy proceeds, you need to know the country for your carrier's signal.