Database Users

[REQ] original Roms for XT720

Buddies,
can anyone upload the original roms for Milestone XT720? (SG, Kr, and other)
So we can do more testing worry free. If anything goes wrong, we can just flash it back to original. It would be nicer if someone can also show how to flash the rom.
------- Edit ---------
Flashing Guide by Hahutzy
Hahutzy said:
Alright, I just crashed my phone into an infinite FC loop by messing with system/app, so a reflash was in order.
Here's how I successfully flashed it back to stock using Windows 7 32bit (dense text ahead):
1) Search somewhere along the lines of "RSDLite - download here" on google
2) Go inside first link, download the file that's named somewhere along the lines of "RSDLite_4.5.3.zip"
3) Install it.
4) Go to http://and-developers.com/sbf:xt720
5) Download the 2nd Full Flash rom, the one where the provider is "Southeast Asia"
6) Unzip that file, you now have a .sbf folder (not file)
7) Put that .sbf folder in C:\Users\Admin\My Documents
8) Shut down phone, take out battery
9) Hold Power + Volume Down + Camera buttons all at once
10) Put in the battery while holding those buttons
11) Phone is now in bootloader mode (screen looks like a command prompt)
12) Release the buttons, and plug USB to computer and phone
13) Open RSD Lite, your phone should be detected as connected (Device name was like "S OMAP 3440" or some BS like that)
14) Click "..." to browse for the .sbf file in C:\Users\Admin\My Documents
15) In RSD Lite, click to highlight your connected XT720, and then click "Start". The first column beside the connected phone should now have a green icon thing, and the ROM is being flashed.
16) DO NOT TOUCH YOUR PHONE, THE CABLE, OR THE COMPUTER! (I went and took a dump)
17) When the "Status" column in RSD Lite says "Please manually power up this phone", so shut it down and power it again. Note: The status stays in "Checksum Group 37" for a verrrrryyyy long time before saying "Rebooting". I thought it got stuck there, but it ended up ok.
18) Your XT720 is now reflashed to stock.
19) You can now close RSD Lite. It will complain saying you will damage the attached device, but I pulled it out wayyyy before this (I unhooked it when it told me to reboot manually) and my XT720 is not dead. You may choose to close RSD Lite before unhooking your XT720.
20) Post your results in this thread and confirm or reject my procedure.
spiderx_mm, you may quote this on your first post for others' easy access to this procedure if you so wish to.
Click to expand...
Click to collapse

I agree on this, i need a EU rom.

i am using an SG xt720. is there anyway to dump the rom?
@mariomsg1, i remember u have reflashed ur rom once before right? may i know where did u get the sg starhub rom last time? could u share it please. thanks

http://and-developers.com/sbf:xt720

xt720 said:
http://and-developers.com/sbf:xt720
Click to expand...
Click to collapse
yes, that is

there latest ROM is STR_U2_01.18.2
mine is STR_U2_02.18.3 (bought unlocked retail version from expansys europe)
anybody got same unrooted ROM? Mine has problems, I am stuck with ROOT which stopped working after couple of days, and now I can neither un-root, nor root again.

mariomsg1 said:
I agree on this, i need a EU rom.
Click to expand...
Click to collapse
can u share a step-by-step flash guide?

U can flash with RSDlite. just need a sbf file.

okie. any version do u recommend? or shall i just use the latest version?

Yes
Sent from my Milestone XT720

Sorry, can i know how to put the phone into bootloader mode? I cant not find in google and this forum for xt720.

press volume and power together

can not go to boot loader. Already press power and volume button

first you need to switch off the phone, then press camera button and power and keep those pressed until recovery icon appears. THEN press volume up and power, if I remember this correctly.

solnyshok said:
first you need to switch off the phone, then press camera button and power and keep those pressed until recovery icon appears. THEN press volume up and power, if I remember this correctly.
Click to expand...
Click to collapse
press play button and power, then press volume up and camera button

play button = small button next to the camera shutter

please help
When i do the guide, phone at first go to recovery mode, and nothing happen. RSD lite can not recognize the phone. I use recovery mode to wipe cache and data like it said factory reset. Then i get stuck. Phone can not start up, stand at motorola logo.
I still can go to recovery mode, but not boot loader mode. And it appear error in recovery mode: E:\ can't open /cache/recovery/command. Now how can i repair my phone?

flash sbf file with rsd lite on bootloader mode

Sorry i cannot put the phone to bootloader mode. It get stuck at recovery mode when i press vol up and camera. And computer did not regconize the phone also. I guess that i still missed the way to go to boot loader. Can you please do a step by step guide? What kind of windows you use?
mariomsg1 said:
flash sbf file with rsd lite on bootloader mode
Click to expand...
Click to collapse

civi309 said:
Sorry i cannot put the phone to bootloader mode. It get stuck at recovery mode when i press vol up and camera. And computer did not regconize the phone also. I guess that i still missed the way to go to boot loader. Can you please do a step by step guide? What kind of windows you use?
Click to expand...
Click to collapse
go to flashing mode directly by pressing volume up+camera button+power button. after that just flash the sbf in provided the windows can see ur phone. make sure u also install the required driver

[Q] defy stuck at motorola boot screen after flash

i flash my phone with a custom rom from this forum
succesfull until RSD Lite step
after RSD Lite, my phone stuck at Motorola logo with blur
tried pull off and pulling on the batery with power and volume up, it got back to bootloader screen
try aother RSD Power, it is still the same
Progress till 100 persen, but the phone stucked at motorola blur logo
any solution, guys?
thanks

What were you trying to flash?

I try to upgrade to froyo.
it stuck after RSD Lite step

Well first, is your phone rooted? Secondly, what stock version did you have?
I think I can get you up and running with Froyo

you may try to install your original version/build number sbf. if its work, maybe you can try flash froyo ROM again. then when you finished restore custom ROM all you have to do is go to bootloader then flash boot/devtree only sbf.. dont pull usb connection. but if RSD want you to turn phone manually then you need to press power button even though your phone at booting state..

i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur

FL4M3K1NG said:
i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur
Click to expand...
Click to collapse
did you find fix?

What SBF file did you use?
Have you tried another file?

get into stock recover (Vol Up + Power) then wipe data/cache

Half Bricked
I have an Mb525 rooted (that was) running stock 2.2 Blurred. I installed the Defy boot loader and hard reset/wiped partitions and (tried to) install cm7 from SD, it installs fine, goes fine, everything is all set. Reboot the device and the splash image pops up with the white LED first, then the blue one for boot loader, and finally the green one. It stays on splash screen. I tried 2 different versions of cm7 and both do the same thing. I'm able to access the boot loader, it just doesn't finish loading whatever I flash onto it.
As my phone is dysfunctional, I would appreciate it if you could contact me through my Skype;
kurtdunsmore
I won't receive emails.. =/
Specs:
Moto Defy shipped with 2.1
Rooted
Red Lense
T-Mobile, U.S.A.
Please let me know if any other information would be helpful.

tendyfish said:
get into stock recover (Vol Up + Power) then wipe data/cache
Click to expand...
Click to collapse
to go in stock recovery u must use Vol Down + Power

Solution
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.

aed0101 said:
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.
Click to expand...
Click to collapse
This worked perfectly well. Thank you.
Andy

[CWM 3.1][PORT][Fixed]BootMenu_v0.8.6.update_forA953

Thanks to r2beta0 for fixing the issuse related to /data and overclocking.
Thanks to sw_acer for porting and the original link here http://bbs.gfan.com/android-2194589-1-1.html
This bootmenu is ported from Defy !
Install tutorial:
1. Apply Bootmenu v0.8.6-v2.zip via CWM (droid2bootstrap);
2. Then reboot, your phone should enter bootmenu. Press volume up/down key to highlight and power button to select/confirm;
3. Enter boot->Set default: ->[choose the default boot method you want] ;
4. In normal cases, you will see the led goes blue for 1.5 sec during booting and then you can enable bootmenu by pressing volume keys.
Features:
1. Overclocking;
2. Choose to enable Custom Recovery 3.1.0.0 or Stock Recovery;
3. Support adb in Custom Recovery mode
Tips: Not recommend to set default boot method as 2nd-init or 2nd-boot if you are not a DEV. If you have set it to 2nd-int or 2nd-boot and cause bootloop. Don`t flash sbf first. Because you can re-enter bootmenu by pressing volume key when you see LED goes blue during booting. And then please set back to boot bootmenu or normal boot. So your phone will not bootloop anymore.

Thanks for posting it here. I just tried it and it works like a charm.

I'm not familiar with Defy's BootMenu, but why would I want to use it over the default CWM Recovery?

w0ndersp00n said:
I'm not familiar with Defy's BootMenu, but why would I want to use it over the default CWM Recovery?
Click to expand...
Click to collapse
Of course you can choose not to use this. But Defy's BootMenu provides more function other than just recovery.

Hmmmm... my phone bootloops. Now I've got to flash it.

frenetico said:
Hmmmm... my phone bootloops. Now I've got to flash it.
Click to expand...
Click to collapse
Have you choose the wrong boot method, try to select normal boot. You can press vol key to re-enter the bootmenu when the LED light up instead of flashing sbf.
Edit: Here in my phone it works fine...

Endless7 said:
Have you choose the wrong boot method, try to select normal boot. You can press vol key to re-enter the bootmenu when the LED light up.
Edit: Here in my phone it works fine...
Click to expand...
Click to collapse
Yeah. That's exactly what I did. I even fomatted cache partition. The phone was forcing the boot the whole time. Even when I pulled the battery the phone started to boot normally, which means, that I couldn't enter CWM.
After that I deinstalled the boot menu resulting in .sbf-ing the phone.

frenetico said:
Yeah. That's exactly what I did. I even fomatted cache partition. The phone was forcing the boot the whole time. Even when I pulled the battery the phone started to boot normally, which means, that I couldn't enter CWM.
After that I deinstalled the boot menu resulting in .sbf-ing the phone.
Click to expand...
Click to collapse
When the phone boot to logo M, you should see the LED right-up goes blue for 1.5 sec. During this 1.5 sec, press any volume keys and you will enter bootmenu again. And then you can choose to enable CWM or any other thing.

Now I .sbf-ed the phone, wiped it and still it doesn't boot properly. Damn...

frenetico said:
Now I .sbf-ed the phone, wiped it and still it doesn't boot properly. Damn...
Click to expand...
Click to collapse
Still bootloop ?

Unfortunately, yes. Gotta send it back but who cares.

frenetico said:
Unfortunately, yes. Gotta send it back but who cares.
Click to expand...
Click to collapse
I have tried and found restore /system only can undo the .zip and flashing sbf do the same. Maybe your bootloop is caused by other thing.

Damn those guys of 3 Austria. Now I found the reason for not booting. My SIM card is totally destroyed. Now I put a second SIM card in there and surprise: My beloved Milestone 2 boots normally.

Thanks
Let´s see if we find a way to boot cm7...

Sry for offtopic. Does this mean, we have a new possible way of booting something else, than Motorola stock roms?

This is not a real port... The hole bootmenu, CWM recovery and overclock modules are built for Defy. The only things that changed from the bootmenu that you can download from Market are the icons and (not sure) you can navigate with the keyboard.
Well, if you want a real MS2 recovery use the MS2Bootstrapper.apk (Chinese, it's somewhere in the forum) or build a new bootstrap recovery from source.
Sent from my Milestone 2 XDA App

Is it compatible with the latest last china GB leek?
And can we replace CWM3(from defy) to CWM4(from MileStone2Bootstrap_GoAPK.apk)?

xenusr said:
Is it compatible with the latest last china GB leek?
And can we replace CWM3(from defy) to CWM4(from MileStone2Bootstrap_GoAPK.apk)?
Click to expand...
Click to collapse
Yes it is compatible. But don't try to install Milestone2Bootstrap_GoAPK side by side with any other CWM/Bootmenu.
@Milestone 2 (Finnaly on Gingerbread!)

The recovery isn't working fine. Something is wrong with /data and recovery can't mount or format it as expected.
Edit: Ok, could get the darn thing to work here Endless7, you have to edit /system/bootmenu/recovery/sbin. The scripts tune2fs (hijack) and mk2fs (hijack) are pointing to mmcblk1p25 instead of p26.

r2beta0 said:
The recovery isn't working fine. Something is wrong with /data and recovery can't mount or format it as expected.
Edit: Ok, could get the darn thing to work here Endless7, you have to edit /system/bootmenu/recovery/sbin. The scripts tune2fs (hijack) and mk2fs (hijack) are pointing to mmcblk1p25 instead of p26.
Click to expand...
Click to collapse
I have build a new one, but I cant test it yet. Now I am running MIUI, install any other recovery will break the 2nd-init for ROM.

[Q] Please help- defy stuck at red moto logo-recovery not showing full menu

hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?

Do not worry!
cute_kayani said:
hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Click to expand...
Click to collapse
Hello there!
As you mentioned that you are not able to see other Recovery options like "Install from zip" etc. This is because you must be booting your phone into the Stock Recovery. For those extra options to come up we need to boot the phone into the Custom Recovery.
To boot into Custom Recovery:
1. Press power on button;
2. Notice when the LED light blinks "BLUE" color; press both the volume keys this time;
3. Now it should show you Custom Recovery options this time;
4. Select "Install from Zip" and flash the ROM you were trying to flash (Also refer to the ROM info if that has some special installation steps).
If the above steps does not resolves the issue then you can always flash you phone with the Stock ROM found in the following article named as SBF:
http://forum.xda-developers.com/showthread.php?t=1216982
[Note: Above mentioned article has all the information that a defy user needs. Thanks "Zephyrot" for that wonderful article.]
Hope that helps!
Good Luck!!

there is no blue led, when press power button it stuck on red moto logo..
and when press both vol down and power it goes into recovery with limited options.
can it is possible i put rom into sd card and rename it with Update.zip and then in recovery use it with update zip..
or any other solution
Thanks

cute_kayani said:
hey, i have moto defy with custom rom MIUI 2.3.7 miui version 2.3.16. yesterday i got weekly miui rom update and cellphone download it and istalled it succesfulyy in recovery mode.
latest version are 2.3.23.
After update when phone reboots,it stucks on red moto logo, and cant pass it.
I reset it from recovery and also wipe cache. but still cant pass from red logo.
And recovery not showing full menu, there are just 4, like install update from sd card, reboot, wipe date,wipe cache.
plz tell where is the other option like install from sd card,so that i can reinstall rom. i put rom in card and press install update.zip in recovery but it got aborted.
Plz help what to do?
Click to expand...
Click to collapse
I guess you'd charge your phone first then wait for a while,

cute_kayani said:
there is no blue led, when press power button it stuck on red moto logo..
and when press both vol down and power it goes into recovery with limited options.
can it is possible i put rom into sd card and rename it with Update.zip and then in recovery use it with update zip..
or any other solution
Thanks
Click to expand...
Click to collapse
I'm disappointed to know that you are still facing the same issue. Also, renaming the file to update.zip will not let you flash it.
As suggested above first recharge your battery for a while and then flash with appropriate SBF of your region using RSD Lite. Refer to the above given link it has all the information. Also, note that if you flash with any particular android version SBF (which is not a fixed SBF) then you will not be able to downgrade (above article has all info).
Hope this helps!
Good Luck!

Okay, thanks for all.. this is the T Mobile Uk version and i got it with eclair rom, and than updated with orignal T mobile froyo.
Now i should start from froyo or eclair?

cute_kayani said:
Okay, thanks for all.. this is the T Mobile Uk version and i got it with eclair rom, and than updated with orignal T mobile froyo.
Now i should start from froyo or eclair?
Click to expand...
Click to collapse
You may use any ROM either Froyo or Eclair. Please also check the downgradilbility of the ROM. As in many of the cases if the ROM is not fixed then switching back to the earlier versions is impossible without having the Nandroid backup. I suggest you to use the version which is officially released in your region.
ROMs can be downloaded from the below mentioned link:
http://and-developers.com/sbf:defy
Complete information about various SBFs at:
http://forum.xda-developers.com/showthread.php?t=966537
Hope this helps!
Happy Flashing!

i flash it with JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
and i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
what is this?
but when i connect usb ,rsd detect it..but this time no white led also.

I again flash it with JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Service1FF.sbf
successfully passed and message pop for reboots,but still black screen.

Rajneeshgadge17 said:
Hello there!
As you mentioned that you are not able to see other Recovery options like "Install from zip" etc. This is because you must be booting your phone into the Stock Recovery. For those extra options to come up we need to boot the phone into the Custom Recovery.
To boot into Custom Recovery:
1. Press power on button;
2. Notice when the LED light blinks "BLUE" color; press both the volume keys this time;
3. Now it should show you Custom Recovery options this time;
4. Select "Install from Zip" and flash the ROM you were trying to flash (Also refer to the ROM info if that has some special installation steps).
If the above steps does not resolves the issue then you can always flash you phone with the Stock ROM found in the following article named as SBF:
http://forum.xda-developers.com/showthread.php?t=1216982
[Note: Above mentioned article has all the information that a defy user needs. Thanks "Zephyrot" for that wonderful article.]
Hope that helps!
Good Luck!!
Click to expand...
Click to collapse
Tnx for post guy

Palestrino said:
Tnx for post guy
Click to expand...
Click to collapse
Thanks,
I tried but there was no blue led and flash it two time but now black screen is the hurdle.
please tell how to pass this.
While flashing there was message for successful status, and reboot but now when i press power button nothing happen. And neither goes into boot loader or recover.
Only RSD detects my phone for flashing, otherwise its complete dead....
ohhhoooooo MIUI Rom You ruined my DEFY (

cute_kayani said:
i flash it with JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
and i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
what is this?
but when i connect usb ,rsd detect it..but this time no white led also.
Click to expand...
Click to collapse
cute_kayani said:
I again flash it with JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Service1FF.sbf
successfully passed and message pop for reboots,but still black screen.
Click to expand...
Click to collapse
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!

Thanks Rajneeshgadge17..
When i press these buttons nothing is happening. and i charge up battery with universal charger, don't know what is wrong.
only RSd detect my phone when i plugin USB.. otherwise it seems completely dead.

can somebody help........

cute_kayani said:
can somebody help........
Click to expand...
Click to collapse
Refer this post = http://forum.xda-developers.com/showpost.php?p=24205029&postcount=2

What if I have balck screen in recovery mode as well?
Do you have any idea how to solve the same problem if the recovery mode does not start neither? Only RSDLite sees that the phone is connected. I can refresh the ROM but I did not find the right .sbf file yet. Do you know maybe which one would bring back the phone from death?
Thank you in advance!!
Rajneeshgadge17 said:
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Click to expand...
Click to collapse

Ryaren said:
Do you have any idea how to solve the same problem if the recovery mode does not start neither? Only RSDLite sees that the phone is connected. I can refresh the ROM but I did not find the right .sbf file yet. Do you know maybe which one would bring back the phone from death?
Thank you in advance!!
Click to expand...
Click to collapse
Try to find the latest stock rom from your region... and match with ur defy type... flash with rsd that would bring ur defy back
Sent from my XT535 using xda premium

Doesn't work for me
Rajneeshgadge17 said:
What we need to do?
We are launching Stock Recovery and wiping cache and data.
Use below mentioned steps:
1. Remove battery from phone and then reinsert;
2. Press and hold Volume Down button along with Power button till you see Android icon with an exclamation mark (!);
3. Once you see android icon and exclamation mark release both buttons and now press volume up and volume down button together;
4. Above steps will launch Android System Recovery window (Stock Recovery);
5. Now “wipe data/factory reset” by pressing volume down key and to select press power key;
6. On the next screen it will prompt you to confirm this option by selecting “yes – delete all use data” select this option with power key again;
6. Also “wipe cache partition” from power key as mentioned above;
7. Now select “reboot system now”;
After above steps it will take around 3-5 minutes for first boot and your phone will now boot in normal state.
If the above steps does not resolves the issue then I would recommend you to use some other SBF depending on your region.
Hope this helps!
Click to expand...
Click to collapse
Unfortunately it doesn’t work for me, my defy doesn’t react for any key combination. RSD Lite still discovers it I can flash any sbf’s. But I’m still getting black screen. The problem is that I don’t know which sbf I should use… Please help. I know I can’t brick defy but if I don’t know how to get back I’m almost there… 

0lsztyN said:
Unfortunately it doesn’t work for me, my defy doesn’t react for any key combination. RSD Lite still discovers it I can flash any sbf’s. But I’m still getting black screen. The problem is that I don’t know which sbf I should use… Please help. I know I can’t brick defy but if I don’t know how to get back I’m almost there… 
Click to expand...
Click to collapse
It seems an issue with the Kernel. May be you are flashing the Green lense Defy (MB525) with GB kernel (i.e. MB526 sbf).
Also check the Bootloader version and which Android version you were using.
Here is a list of all the SBF's for both versions:
http://forum.xda-developers.com/showthread.php?t=966537
Hope this helps.
PS:- I don't use Defy for a year now as I own a Nexus 4.

[Q] I think that I really broke my defy (MB525)

Help me, please!
Yesterday, I wanted to make a clean install for the latest Quarx's CM 10.1 nightly (I've been flashing Quarx's builds for almost a year now, he's The Best), but I think I made a terrible mistake.
When I wanted to make a factory reset, I've got this error because the sd-ext, I understand, that happened because TWRP's structure with almost all devices running Android 4.2.2 have a virtual-sd and a sd-ext, so I decided to make an Advance wipe and I every damn box, even wipe system and wipe sd card.
Finally when I rebooted my phone, TWRP asked to install SU, I pressed yes.
Then when my phone was rebooting, I've got this error:
Bootloader
09.10
Err:A5,70,39,00,27
So, I've been flashing Froyo's .sbfs since yesterday, when I get pass verification from RSDLite and rebooted the phone, it just keep bootlooping, I left it almost 15 minutes and still in Froyo's bootanimation, I know it has to do because it's needed wipe data and cahe, but I can't do that because I can't access stock recovery (volume down+power button), I just get the triangle with the little Android in it.
Here's is the .sbf
JORLA_U3_3.4.2_108-5_SIGNED_USAJORDMR1B25CLALALA022.0R_JORLAFROCLALALA_P027_A018_M016_HWp3_WIG147154_Service1FF.sbf.gz
And I did it with RSDLite 5.6.
Hope you can help me, thanks anyway.

On Stock Recovery press Vol-up+down buttons... Rooting & flashing custom roms & don't know how to enter stock recovery?

turffe said:
On Stock Recovery press Vol-up+down buttons... Rooting & flashing custom roms & don't know how to enter stock recovery?
Click to expand...
Click to collapse
Thank you very much yo solve my problem.
My bad for not knowing how to enter stock recovery.

Bootmenu
turffe said:
On Stock Recovery press Vol-up+down buttons... Rooting & flashing custom roms & don't know how to enter stock recovery?
Click to expand...
Click to collapse
I am new to the Defy, but managed to root and move to CM7 and all seems good. I just wondered if there is a version of bootmenu that uses touch screen rather than volume and power buttons? I thought one of the ICS ROMS had a touch screen recovery, but maybe I am thinking of HTC.
Thanks.

tomlogan1 said:
I am new to the Defy, but managed to root and move to CM7 and all seems good. I just wondered if there is a version of bootmenu that uses touch screen rather than volume and power buttons? I thought one of the ICS ROMS had a touch screen recovery, but maybe I am thinking of HTC.
Thanks.
Click to expand...
Click to collapse
Latest CM10 and CM10.1 have a touch bootmenu, even the latest CM 10.1 has TWRP 2.5 that it's a touch custom recovery.

Bootmenu 2
soyusado said:
Latest CM10 and CM10.1 have a touch bootmenu, even the latest CM 10.1 has TWRP 2.5 that it's a touch custom recovery.
Click to expand...
Click to collapse
Thanks for your reply.
I prefer CWM to TWRP, but is there a way to get the more advanced bootmenu 2 and keep CWM? Sndinitdefy seems to only have the recovery using the volume controls and power button.
Thanks.

tomlogan1 said:
Thanks for your reply.
I prefer CWM to TWRP, but is there a way to get the more advanced bootmenu 2 and keep CWM? Sndinitdefy seems to only have the recovery using the volume controls and power button.
Thanks.
Click to expand...
Click to collapse
I think Quarx merged that bootmenu when he started to make his 2ndboot nightlies for CM10, but I don't know how to install it separately from his .zip files, you should download some of the latest ROMs a see if you could merge the bootmenu to CM7.

where are you download this Froyo's .sbfs?
soyusado said:
Help me, please!
Yesterday, I wanted to make a clean install for the latest Quarx's CM 10.1 nightly (I've been flashing Quarx's builds for almost a year now, he's The Best), but I think I made a terrible mistake.
When I wanted to make a factory reset, I've got this error because the sd-ext, I understand, that happened because TWRP's structure with almost all devices running Android 4.2.2 have a virtual-sd and a sd-ext, so I decided to make an Advance wipe and I every damn box, even wipe system and wipe sd card.
Finally when I rebooted my phone, TWRP asked to install SU, I pressed yes.
Then when my phone was rebooting, I've got this error:
Bootloader
09.10
Err:A5,70,39,00,27
So, I've been flashing Froyo's .sbfs since yesterday, when I get pass verification from RSDLite and rebooted the phone, it just keep bootlooping, I left it almost 15 minutes and still in Froyo's bootanimation, I know it has to do because it's needed wipe data and cahe, but I can't do that because I can't access stock recovery (volume down+power button), I just get the triangle with the little Android in it.
Here's is the .sbf
JORLA_U3_3.4.2_108-5_SIGNED_USAJORDMR1B25CLALALA022.0R_JORLAFROCLALALA_P027_A018_M016_HWp3_WIG147154_Service1FF.sbf.gz
And I did it with RSDLite 5.6.
Hope you can help me, thanks anyway.
Click to expand...
Click to collapse
i do the same step to my defy and now i face the same problem .i think you have salve this problem .but i can't find the this file :JORLA_U3_3.4.2_108-5_SIGNED_USAJORDMR1B25CLALALA022.0R_JORLAFROCLALALA_P027_A018_M016_HWp3_WIG147154_Service1FF.sbf.gz
can you gave me a download adress? i am a chinese and have poor english level ,can you tell me the way you fix your phone step by step? think you !

This thread should help (http://forum.xda-developers.com/showthread.php?t=1216982), in there you'll be able to find everything you need to fix your phone.
First download RSDLite, then search for a sbf suitable for your country.
Then flash it, you need to have Motorola drivers installed and plug the phone on bootloader mode (press volume up+power button), you have to paste the sbf file you extracted in the RSDLite folder, then just execute it and browse the sbf file, finally press flash and wait.
When you read "please start your phone manually" or something like that, disconnect your phone, remove the battery for five seconds then start it on bootloader mode and plug it.
Your phone should boot to Android.
If you get stuck on bootanimation, wipe data and cache from stock recovery (volume down+power button, when you see the triangle press volume volume up+volume down).
Your phone is ready to go now.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app

think you so much
soyusado said:
This thread should help (http://forum.xda-developers.com/showthread.php?t=1216982), in there you'll be able to find everything you need to fix your phone.
First download RSDLite, then search for a sbf suitable for your country.
Then flash it, you need to have Motorola drivers installed and plug the phone on bootloader mode (press volume up+power button), you have to paste the sbf file you extracted in the RSDLite folder, then just execute it and browse the sbf file, finally press flash and wait.
When you read "please start your phone manually" or something like that, disconnect your phone, remove the battery for five seconds then start it on bootloader mode and plug it.
Your phone should boot to Android.
If you get stuck on bootanimation, wipe data and cache from stock recovery (volume down+power button, when you see the triangle press volume volume up+volume down).
Your phone is ready to go now.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
thank you,perhaps it will work , but i don't know my defy produced by which country , can i use the other country's sbf ?

Yong-Zhi Lee said:
thank you,perhaps it will work , but i don't know my defy produced by which country , can i use the other country's sbf ?
Click to expand...
Click to collapse
It's not the country your Defy proceeds, you need to know the country for your carrier's signal.