Hi all,
Just wanna share with you the GT 10.1 owners out there... There's a tiny little friend who lost her way and start to wonder around in my devices, trapped in between the glass panel and LCD, kind of funny when saw it moving inside there.
It eventually stayed static at one point, I don't know how to get it out from there, so I sent it to Samsung services centre for help. Since it still under warranty, they'll replace a new set of LCD panel cause they have no clue how remove it.
Aren't this thing supposed to be tightly seal? or because it's SAMSUNG.
Maybe it broke the seal? If there would be an opening with enough space to fit an ant, you would have had a big dust problem long time before the little guest found its way into the device.
Please tell me you took a photo or a video before you sent it in... That's too funny.
I think its sad. Your little ant friend will never find her way home. She like tom hanks in the movie Castaway
Related
can any1 help me out here i just bought an 8525 for 80 off a co-worker he didnt want it because it keeps turning off on him i think its a few loose connections...theres a bit of play in with the battery but anyhow changed batteries same thing so any one know what part i should be replacing and also where i can get parts for this phone. i have tried looking on the site that i use for my other phones but all i find are screens and black housings so if you guys can help me out i'd love it
anyone im looking at it right now and all seems well and i tested the battery on a different fone and everything is green just cant figure it out. also just found out that my jogwheel is broken
That could explain why the co-worker sold it to you for 80 bucks.. .. you might be able to find parts on Ebay .. see if anyone is selling one with a busted screen or something..
thats exactly ehy i got for 80 i knew what it was just hoping for an easy fix i do repairs tho so no biggie just gotta find the parts thanks ill start looking once my ass friend gets off myspace!!!
It can't be a "loose connection" unless the solder from the battery connectors came loose because he battery connectors are connected right to the board.
thats one thing i noticed also the prong look like they have been squished down almost flat instaed of < they are more - but not that bad and there is quite a bit of playu from the battery compared to my good 8525 oh well maybe i can come up on a third and swap out parts. thanks for the help guys any other suggestion i have already kinda fixed the prongs. and now the phone wont even turn on this suck but i know this can be fixed
hey does any1 have a broken hermes they wouldent mind getting rid of i need parts or if ppl wanna be nice to me and my thin wallet and donate their old broken hermes to me i would really appreciate it
Gyngabread Man said:
hey does any1 have a broken hermes they wouldent mind getting rid of i need parts or if ppl wanna be nice to me and my thin wallet and donate their old broken hermes to me i would really appreciate it
Click to expand...
Click to collapse
I dealt with a similar case a while back. Going off randomly. In his case it turned out it was the battery connections. They had lost some of their spring tension and he was unwilling to try bending them out a little for fear of causing more damage. In the end we decided that he would try placing a strip of card between the battery and the casing on the side opposite to the battery connections. ie. to press the battery more firmly against the connectors. How thick it would need to be would depend on how squashed the connectors are.
It worked for him and he decided just to leave it in place.
Mike
@Gyngabread Man
If you cant fix it let me know. I need the vibrate motor. And no im not kidding
Hi,
I'm new to this forum so i'd like to say hello to everybody first
I have a g1 with the screen cracked. When I say the screen is cracked I mean that upper glass area; The lcd does not seem to be cracked in any way so there is no bleeding at all. Touch still works very well even in the cracked area.
I seem to have come across only 1 ebay auction that was selling a digitizer and everywere is absurdly expensive to buy. Any ideas where i can find one ? At 189$ i'm half way to buying a new phone tbh.
Also I saw in this forum that some people had the same problem and people told them that they would need to replace both lcd AND digitizer, however i clearly saw in the htc dream service manual that they are two separate parts with separate part numbers. Is there some particular reason for this ?
Just to clarify, can any tell me the order in which components are placed in the htc g1 ? Im assuming they are as follows:
Touch Screen Digitizer
LCD Screen
cover and hinge
in that order..Am I right in my assumption ?
Thanks,
Mewt
Bump. I would like to know as well.
Check it out:
This listing just got put up on eBay today. This guy has 50 digitizers for sale:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=230336383436
If you are sure the LCD is intact, you should just buy the Digitizer. The LCD can easily be seen by opening up the phone.
http://cgi.ebay.com/HTC-T-MOBILE-GO...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
I can confirm you can replace the digitizer WITHOUT replacing the lcd.
I just did it. A car ran over my G1 a while ago and I've been lurking on ebay ever since waiting for digitizers to be listed. With a new digitizer, a Torx screwdriver and about an hour I have just replaced the broken one and the new one works perfectly.
Of course that also means I now have a spare G1 since I bought another one in case I couldn't get a replacement.
I will be doing the same shortly.
Actually this is the best price I have found on a digitizer
http://www.perfectesell.com/gog1glscdico.html
Any tips on replacing the part? Does the phone have to come completely apart?
I can't buy from that buyer as he doesn't ship to Malta but thanks, now I know what I need to look for and will be doing so. Hope I can get my g1 working well again...I just hate trying to read messages with cracks in them
Thanks all for your replies
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Mr_dev said:
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Click to expand...
Click to collapse
hey would you say the average person would be able to change the digitizer or do you have to be a handy man.. taking anybodys replys ONLY if you''ve done it
Well I guess I am the average person but then I've taken many a pc and laptop apart and put it back together again so maybe not...
There's nothing that requires great skill in it. As long as you're gentle, patient and careful (taking apart a G1 is like making love to a beautiful woman...). Keep track of what screws came from where and don't try and force anything.
Remember you need some torx head screwdrivers. but you can get these on ebay for very little.
I have to admit I feel a bit smug when I see forum posts from people who advise you sent it back to T-Mo and pay a $100+ excess for them to do it. As if!
Ah, my screen is just gently scratched, but it's annoying sometimes. I might look at into this if it gets any worse.
Just looking at the back of the screen when the G1 is open, it looks like I'd have to take the whole phone apart...are there guides I can look at?
Here is some sites that helped me out.
This is an easy to ready explanation to what you are looking at.
http://www.phonewreck.com/wiki/index.php?title=T-Mobile_G1
This is where I found the service manual a while back
http://www.intomobile.com/2008/12/18/dissect-your-t-mobile-g1-with-the-htc-dream-service-manual.html
This was where you can find the digitizer. (I dunno which one it is... but I think its the clearpad) only thing I could not find a match on part numbers anywhere
http://www.synaptics.com/solutions/products
And this is the address and Houston local number for HTC America. (i didnt check the number so i'm 72.34763% sure its right(just do a little social engineering to get to where you need to be.) )
http://maps.google.com/maps?hl=en&i...-95.551229&spn=0.009187,0.015986&z=16&iwloc=A
same boat here. cracked digitizer. seems like the g1 is the only phone, for which you can't buy one.
Mr_dev said:
Well I guess I am the average person but then I've taken many a pc and laptop apart and put it back together again so maybe not...
There's nothing that requires great skill in it. As long as you're gentle, patient and careful (taking apart a G1 is like making love to a beautiful woman...). Keep track of what screws came from where and don't try and force anything.
Remember you need some torx head screwdrivers. but you can get these on ebay for very little.
I have to admit I feel a bit smug when I see forum posts from people who advise you sent it back to T-Mo and pay a $100+ excess for them to do it. As if!
Click to expand...
Click to collapse
hey i have a question i replace my digitizer but now the bottom part of the touch screen... closest to the menu button doesnt work. what do you think can be wrong
Pull it apart again using the service guide section 2.2.3 and make sure all connections have complete contact. If something is not sitting right the circuit may not be ringing out correctly. Once you have gone through all the steps 2.3.2(lcm assembly) and everything looks connected properly, assemble, reboot and test. If it is not fixed you may have a bad digitizer I'm hoping for the fact that most of your screen is working its just a connection problem.
Mr_dev said:
Its quite fiddly but as long as you have the manual you should be okay.
There's a few things tho. Page 23 doesn't really show you how to disconnect the camera very well. On the underside of the main board there is a connector like the one for the screen. It is released by flipping the paddle lever think 90 degrees down. Otherwise the camera connector gets pulled out when you remove the mainboard.
It should go without saying you don't need to disassemble the bottom "chin" part when you remove it. Oh and page 24 has an error, those aren't the 2 screws you need to remove, its 2 long ones, one is in the top right of that picture on page 24 the other is to the right of the one circled.
Click to expand...
Click to collapse
When you reassembled what did you do about the tape and gaskets? Were you able to buy new or did you use something else? Thanks!
Matt
s02mike said:
Here is some sites that helped me out.
This is an easy to ready explanation to what you are looking at.
http://www.phonewreck.com/wiki/index.php?title=T-Mobile_G1
This is where I found the service manual a while back
http://www.intomobile.com/2008/12/18/dissect-your-t-mobile-g1-with-the-htc-dream-service-manual.html
This was where you can find the digitizer. (I dunno which one it is... but I think its the clearpad) only thing I could not find a match on part numbers anywhere
http://www.synaptics.com/solutions/products
And this is the address and Houston local number for HTC America. (i didnt check the number so i'm 72.34763% sure its right(just do a little social engineering to get to where you need to be.) )
http://maps.google.com/maps?hl=en&i...-95.551229&spn=0.009187,0.015986&z=16&iwloc=A
Click to expand...
Click to collapse
i'm willing to try replacing it myself as well and i was wondering how much your purchased your new digitizer for. would the one suggested earlier at this link: http://www.perfectesell.com/gog1glscdico.html be good? it seems a lot cheaper than other ones and i dont want to buy a faulty and cheap one that may not work as well or break. any other tips would be GREATLY appreciated. TIA!
Here's the correct page on the Perfectesell site:
http://www.perfectesell.com/htcgog1glscd.html
Same price ($65) as the ebay auction that ended.
I dunno what that $12.95 thing was... price doesn't seem right for glass, touch sensing wizardry
mattcairns said:
When you reassembled what did you do about the tape and gaskets? Were you able to buy new or did you use something else? Thanks!
Matt
Click to expand...
Click to collapse
Some of the gaskets i didnt fully remove so i just place em down... and some of the tape i didnt reuse.
bloob9 said:
i'm willing to try replacing it myself as well and i was wondering how much your purchased your new digitizer for. would the one suggested earlier at this link: http://www.perfectesell.com/gog1glscdico.html be good? it seems a lot cheaper than other ones and i dont want to buy a faulty and cheap one that may not work as well or break. any other tips would be GREATLY appreciated. TIA!
Click to expand...
Click to collapse
I bought my digitizer on ebay for about 25 dollars i think. then i bought the screwdrive kit for 7 dollars also
s02mike said:
Pull it apart again using the service guide section 2.2.3 and make sure all connections have complete contact. If something is not sitting right the circuit may not be ringing out correctly. Once you have gone through all the steps 2.3.2(lcm assembly) and everything looks connected properly, assemble, reboot and test. If it is not fixed you may have a bad digitizer I'm hoping for the fact that most of your screen is working its just a connection problem.
Click to expand...
Click to collapse
thanx i took it apart again and that fixed it... i have 2 more problems 1 major 1 not. i dont know but i normally got 3g service in my house and now i dont what could b the problem.
second is that the screen doesnt swivel smoothy as before
So my girlfriend drooped my phone and broke it on me. Oh my beloved atrix what ever will I do without you. Everything about the phone is working just fine so I am curious if its just the touch panel that ia broken. I touch the screen and nothing happens I have fully charged it and turned it on and off several times. Do you guys think if I replace the touch panel that there is a chance it will work again. I didn't get insurance on it because I was very careful with it and took care of it like it was my child lol.
First of all I would like to point out that it is ok to admit that you dropped it, and not your gf.
Secondly I would suggest tearing it down and checking the connections. I have seen where the digitizer connector will be loose and wont be responsive on other phones. I have never taken apart the atrix, so I dont know if that is a unlikely thing for it or not.
In the unlikely event that it really was your gf who dropped it, you could always guilt her in to getting you a new phone
Lol I swear it was her we were at the bar last night and she was trying to show somone the gi Joe psa's. Ill try and tear it down have to find a walk through I guess. The real kick in the teeth is I just bought a e book and it was really starting to get good . As far as guilting her, her parent were with us and gave me a kindle fire because they felt bad but the things useless until they get android running well enough on it.
there is a teardown site, i am too lazy to look it up, I am supposed to be studying business law right now ... dont tell my wife im on xda
I tried to replace my digitizer once and I wouldn't recommend trying to fix it yourself.
There are several youtube videos of the teardown and they are elaborate enough but some parts are really tricky and it's not as easy as it might look. Took me a few hours and the result was far from perfect...
Took the mobo out and checked all plugs everything seems fine. Replaced and still no response I will give the digitizer a try hopefully it works. Ordering it tonight and post my results when it comes in and i install it. I'm supprised you had problems putting it back together only problem i had was my God damn shaky hands lol. I am assuming it fell just right and damaged the chip on the digitizer itself. If it ends up working I know for sure that I will be buying a very buff case! The internals on these things are so fragile!
Hi all,
this morning I left my tablet at home and when I come back found it with broken glass (I think tmy little brother dropped it, but he doesn't confess)..
Sometimes touch works, more often not.
However.. What can I do? I read that some lcd are not glued properly, and it could be my case, because on the left it's a bit lifted on the center.
In your experience, is there hope that it can be repaired for free?
And if not, where can I find replacement (I only found this: http://www.powerbookmedic.com/Google-Nexus-7-LCD-and-Digitizer-Assembly-p-22606.html , but it isn't available)?
Thank you!
sooooo sad! :/
Pictures of damage: http://imgur.com/a/E7Rkf
diaSalvatore said:
Hi all,
this morning I left my tablet at home and when I come back found it with broken glass (I think tmy little brother dropped it, but he doesn't confess)..
Sometimes touch works, more often not.
However.. What can I do? I read that some lcd are not glued properly, and it could be my case, because on the left it's a bit lifted on the center.
In your experience, is there hope that it can be repaired for free?
And if not, where can I find replacement (I only found this: http://www.powerbookmedic.com/Google-Nexus-7-LCD-and-Digitizer-Assembly-p-22606.html , but it isn't available)?
Thank you!
sooooo sad! :/
Pictures of damage: http://imgur.com/a/E7Rkf
Click to expand...
Click to collapse
At this moment you have Two Options..
1. Sell it on Ebay for Parts you probably get about 50 to 100 at most.
2. Pack it up and store it away in a closet and forget about it. Until the Screens are being sold as parts.
the reason for both options is due to Asus not selling the LCD/Glass at the moment as a Part.
they are still manufacturing the Nexus 7 and soon will be making the Nexus 7 with 3g capability.
so there biggest priority at the moment is to keep making them.
you can send it in for repair with Asus but it will cost you about $160.00 just to get it repaired.
not to mention how much it going to cost you to ship it to them.
is the device frame cracked or damaged broken is the back scuffed or cracked .. Does it look like its been dropped. IS THE Crack on the left side. CAN You post pictures. Answer the above and give some pics and more info..
i know you do not really know for sure .one more question was it moved can you tell for sure rather someone was using it or not ?
If you really feel it cracked laying where you left it . Without anyone touching it . CALL GOOGLE PLAY.. But please do not be dishonest . There is a issue with the screen lift cracking and becoming unresponsive . as well as backlight flashing issues..
Looking forword to seeing pics and more info
my problem is that when i received my device i found a small bend (like if a small ball hit the screen )on the down button of the screen , it wasn't noticeable even if you move you`re finger across it , then several days a go I was working hard on the device and it got really hot and suddenly i noticed a yellow thing on the screen same place as the bends locate ,
the yellow thing will go after the screen cools down
any idea what is that yellow thing
if any one have any idea how to fix it I would appreciate that
Thank you allot
note: at the moment am not in us or any country that google play support :crying:.
Looks like the glue that sometimes shows up on the N4/iPhone when they overheat. If it is, it isn't a huge deal
Sent from my Nexus 4 using Tapatalk 2
is it going to disappear ?
Do you want to risk waiting? Get Google to replace it asap. You paid hundreds for the device, it should be *perfect*.
RevoBass said:
my problem is that when i received my device i found a small bend (like if a small ball hit the screen )on the down button of the screen , it wasn't noticeable even if you move you`re finger across it , then several days a go I was working hard on the device and it got really hot and suddenly i noticed a yellow thing on the screen same place as the bends locate ,
the yellow thing will go after the screen cools down
any idea what is that yellow thing
if any one have any idea how to fix it I would appreciate that
Thank you allot
note: at the moment am not in us or any country that google play support :crying:.
Click to expand...
Click to collapse
Dude I have the exact thing wrong with mine. When its hot I get a really ugly yellow ring there too. Rest of the screen is fine but hasn't dissipated in two weeks.
The bad news is that either you play the play store lottery and end up with a worse device or you do the same with lg. I was going to get mine repaired, or rather have the screen replaced by lg rather than get yet another exchange but another person said that lg charged the repair cost and shipped a new phone. I don't know if the replacement is a refurb but it would make sense. The whole point for me with lg doing the warranty repair is to not get a different phone. Everything about my phone is awesome. I think we might have no choice unless you just want to keep it. I was going to but the ring drives me nuts. It is very visible in a sea of white.
Sent from my 5th and final Nexus 4
Jayrod1980 said:
Dude I have the exact thing wrong with mine. When its hot I get a really ugly yellow ring there too. Rest of the screen is fine but hasn't dissipated in two weeks.
The bad news is that either you play the play store lottery and end up with a worse device or you do the same with lg. I was going to get mine repaired, or rather have the screen replaced by lg rather than get yet another exchange but another person said that lg charged the repair cost and shipped a new phone. I don't know if the replacement is a refurb but it would make sense. The whole point for me with lg doing the warranty repair is to not get a different phone. Everything about my phone is awesome. I think we might have no choice unless you just want to keep it. I was going to but the ring drives me nuts. It is very visible in a sea of white.
Sent from my 5th and final Nexus 4
Click to expand...
Click to collapse
it is hard to ignore the problem , the device is fantastic
but what is that yellow spot
is it glue ?
how does glue reached the middle of the screen :silly:
Well the whole screen is glued to the touchscreen. The glue is thicker in that area because of the deformation in the glass. The person or robot pushed too hard when the panel was installed or glued and thus it dried unevenly. I got an order in for yet another RMA but the situation really pisses me off. My last is faster binned, perfect speaker and battery and everything else. Hardly any rattle, etc. When the RMA replacement ships I'm still going to call the lg warranty number and see if there's an option to replace my actual screen rather than getting a replacement. I seriously doubt they will scrutinize a device, even one they have repaired through refurbishment, as much as an anal retentive owner like myself will. I'll let you know if I find anything out. Knowing my abysmal record with the play store, my next will be worse than this one.
Sent from my 5th and final Nexus 4
Jayrod1980 said:
Well the whole screen is glued to the touchscreen. The glue is thicker in that area because of the deformation in the glass. The person or robot pushed too hard when the panel was installed or glued and thus it dried unevenly. I got an order in for yet another RMA but the situation really pisses me off. My last is faster binned, perfect speaker and battery and everything else. Hardly any rattle, etc. When the RMA replacement ships I'm still going to call the lg warranty number and see if there's an option to replace my actual screen rather than getting a replacement. I seriously doubt they will scrutinize a device, even one they have repaired through refurbishment, as much as an anal retentive owner like myself will. I'll let you know if I find anything out. Knowing my abysmal record with the play store, my next will be worse than this one.
Sent from my 5th and final Nexus 4
Click to expand...
Click to collapse
if LG would replace our screen I think that would be PERFECT .
ahhhhh
my friend I hope that you would be able to fix your problem , yet in my case I am outside usa at the moment so i think LG would charge me for a new device (or screen) .
if you were able to resolve your problem please don`t forget me :crying:
best wishes