PLEASE HELP ME!
Just flashed in JJ. Then from recovery i chose to reboot system now, and now, i cant get in or out from the android logo. Just stuck there. Even if i pull out the battery - it wont work. I made a nandroid backup. I would appreciate some help.
0
PLEASE HELP ME!!! It has been there for an hour!
restore your backup.
pull out your battery.. then.. turn on your phone... with push volume down + power at the same time..
when u load into a recovery mode..
just chose a restore option.. then restore your nand backup..
It may also help to install a rom that works with your current Gen version
Check with the Pigfish app.
Sent via Tapatalk
Related
heei guys .
half a year before I bought the zte blade, and so far it worked well.
but suddenly it stops working ..
whenever I try my cell phone goes immediately to start the red "back" button on (bright red) and then there's the green robot android, then the blue zte intro and then it all over again ..
I have not changed my zte (clockwork, rom)
I know myself well not so good ..
would be really nice if someone could help me ..
I do not know what to do ..!!!
or is it maybe bricked ?!
thanks ..
Its not bricked as it still boots up.
When exactly does the phone crash - when you make a call, start an app, or just automatically reboots?
Did you install a new app just before this started happening?
Is the phone rooted?
Are you sure the battery is ok? Try starting phone with charger plugged in.
ouh ..
yes when i switch the phone on the android boot logo cames then the (blue) zte intro .. and then the zte intro comes again and again ...
noo ..
aahm ? i dont do anything with the pc and the zte ..
so i think i dont root it or something ..
one time there was "ftm" on the screen (after it had this problem).. but i didnt know what this is ..
thank you in front off !!!
but i didnt came anymore to the homescreen , or lock screen
Try booting into recovery and clear the cache? I remember my old G1 did the same thing, and after clearing the system cache it worked.
To boot into recovery i think you keep hold of volume down when turning the device on.
If that doesn't work you could wipe the device, but you'll loose everything on it then.
Sent from my ZTE BLADE using XDA App
The issue you have is this, the rom that has been flashed to the phone is for Gen 2, but the phone is still set on Gen 1.
You'll need to boot into recovery and perform a restore, or flash Ginger stir Fry Rom, then the phone will work.
sent using tapatalk
Solutions depend on
-- whether or not u have custom recovery installed ,
-- whether or not fastboot is enabled in your device. (It isn't enabled only in stock gen2 firmware)
-- whether or not u have rooted and made changes to system partition.
Possible solutions
-- If u have custom recovery installed then format (= wipe data/factory reset) the device from the recovery.
Power off the device. Then by holding volume down power on the device. This takes u into custom recovery menu if it is installed. If custom recovery isn't installed this takes you to FTM MODE.
-- If u have fastboot enabled then use this method to format ur device. Power off the device. Then hold volume up and power on the device. Here the device should stay at green android logo forever if fastboot is enabled. This is fastboot mode. Now install zte USB drivers in PC and connect phone in fastboot mode to PC. It will install the software. Now in device manager u shouldn't see any android named devices with yellow unrecognised format. Then use fastboot windows tools from command prompt. The command to format tthe device is
fastboot erase userdata
-- if the above processes didn't work then using tpt is recommended way. U can flash complete low level device firmware using tpt. U can flash either a recovery alone to hard reset. Or u can flash a complete rom. On bit searching at modaco u will get more information regarding everything.
Sent from my Blade using XDA App
THANK YOU !!
but i dont understand that things .. ?!
can you explain me your answer for people do not understand much of it ?
Download gen1 to gen2 (there is a download link in this section) http://forum.xda-developers.com/showthread.php?t=1258855
Unzip the file and place the image ( the image is called image, not gen1 to gen2) on the root of your sd card (ideally it is best to do this on a pc)
Also download and place the Rom you wish to use on the root of your SD card (cyanogenMod 7.1.0 stable release works well) http://forum.xda-developers.com/showthread.php?t=1297776
DO NOT UNZIP THE ROM at this stage.
Put the SD card back into the phone.
Power off the phone, hold menu & vol + (up) & power at the same time, you should see some green writing, wait until it is finished (well done your phone is now gen2)
You should now arrive at the clockwork recovery screen, if not power off the phone, then hold vol - (down) and power (together), clockwork will boot.
Now using clockwork recovery, clear data/factory reset, then install your rom from the zip, that is all there is to it, obviously you'll have to enter your login details to use the market and sync your contacts etc, but your phone should now be working.
Don't forget to make a nandroid backup.
Goodluck
sent using tapatalk
THANK YOU VERY VERY VERY MUUCHH !!!!
it works perfect !!!!!!!
thanks ((((
You are very welcome
sent using tapatalk
Hello,
My friend just brought LG G2 international version 802, and gave it to me, to root it and install cm 11 on it. Ok all went ok, I've rooted the phone, and installed twrp recovery on it.
Then I've done backup of the current rom, and then I've wiped all. I mean system, chace, data.. all besides the SD card. And them STUPIDLY PRESSED REBOOT.
Now I'm stuck on LG logo, is there any way to repair that? :/
I'm not familliar with LG devices I've owned Nexuses and Samsung phones..
Please any help will be much appreciated.
Btw I can get in to the download mode, but I don't know how to get in to the recovery mode.. Maybe I could get in to the recovery and then just restore ??
Hold the power key and volume down.
Release before the LG logo pops up and then press volume down and power at the same time again.
You will hop into a factory data reset screen press power to agree to factory data reset and it will boot you into recovery.
It does NOT actually reset but flashes the TWRP to get into recovery.
Good Luck,
Bucika said:
Btw I can get in to the download mode, but I don't know how to get in to the recovery mode.. Maybe I could get in to the recovery and then just restore ??
Click to expand...
Click to collapse
If download mode works, why don't you just flash one of the official .kdz's?
As for recovery mode: Turn off your phone, volume down & power, when the LG logo appears release and press them again. If you made a backup, I believe you can just restore it.
Thanks I'm on it! Hope that helps. Btw if I can get in download mode it means I'm not hard bricked right?
Bucika said:
Thanks I'm on it! Hope that helps. Btw if I can get in download mode it means I'm not hard bricked right?
Click to expand...
Click to collapse
If you're hard bricked you won't be able to turn the phone on at all.
Got ya!
Thanks for fast help guy's I really appreciate it!!
I've managed to get into recovery THANK God! the phone is back and running again, thanks to all of you!
Much thanks again.
That's wonderful news!
Sent from my LG-D802 using xda app-developers app
Hi guys, I think I have a big problem ...
After flashing OOS3 roms, I have restored an OOS2.1.1 nandroid backup and I get a bootloop. (I didn't realize that it was an OOS2.1.1 backup)
The situation is I can't enter to recovery and now the phone don't respond to a button pressing, I think my battery is at 0% ...
What can I do, please help me ...
_ ReivaX _ said:
Hi guys, I think I have a big problem ...
After flashing OOS3 roms, I have restored an OOS2.1.1 nandroid backup and I get a bootloop. (I didn't realize that it was an OOS2.1.1 backup)
The situation is I can't enter to recovery and now the phone don't respond to a button pressing, I think my battery is at 0% ...
What can I do, please help me ...
Click to expand...
Click to collapse
Keep your phone to charge overnight (even if it doesn't light up or anything)
Try going into fastboot mode (power+volume up)
https://mega.nz/#!itR00ZaI!gJ6T0jgqfZaIF9NLlCzWj4LIGMMhCw8m8owFdeB_2B4
Download and extract this
Connect your phone to the laptop
Run the flash_Ox211.cmd
Then unplug your phone and reboot into recovery mode
Flash official TWRP recovery from the website
Reboot into recovery
Flash your favourite ROM
For further inquiries or if you get any errors, check this thread http://forum.xda-developers.com/oneplus-2/general/guide-return-op2-to-100-stock-unbrick-t3229606
Thanks mate!
I'll take a look.
I was trying to install your v2.2 ROM.... is my favourite ROM at this time!!
Hello everyone,
here what's happenend:
I have downloaded the ota normally
charge enough
click on install
the installation looked normal
after the installation was finished it boots normally until the "Android was updating, optimize apps.." come that runs from 0 to 89 apps and then it reboots
and at this point something went wrong.
the oneplus bootlogo appeard and the boot animation plays. but when it finished the screen is black and after a few seconds the "android was updating" banner appeard again.
then it goes again in the bootanimation and so on..
i've restarted my phone by pushing the powerbutton once. still not working.
My phone is stock!
no root
no costum recovery
I hope you can help me.
Cheers, Confused.
additional Information
i'm able to open the recovery mode
confusedx3 said:
i'm able to open the recovery mode
Click to expand...
Click to collapse
If you are able to boot into twrp then follow the guide mentioned below (Twrp has MTP enabled just in case u didn't know) :
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
thank you for the answer.
i dont have twrp installed i've only the stock recovery
what if i do a factory reset ?
i read this as a solution here:
https://www.reddit.com/r/oneplus/comments/3mtavv/opt_stuck_in_boot_loop_after_ota_update/
do you think that work in my case ?
confusedx3 said:
thank you for the answer.
i dont have twrp installed i've only the stock recovery
what if i do a factory reset ?
i read this as a solution here:
https://www.reddit.com/r/oneplus/comments/3mtavv/opt_stuck_in_boot_loop_after_ota_update/
do you think that work in my case ?
Click to expand...
Click to collapse
Yes
i am also stuck at same situation but the prob is i hav no recovery installed and i dont want to loose my internal data...is there a way to roll back ????
same here
I also installed through the software update button.
Everything seemed to work fine till optimizing apps.
Then my phone was showing starting apps...
it did it for an indefinite time and then i pressed the power button to reboot the phone.
however now it is not moving beyond the android logo and i dont want to lose my data so i am not clearing data.
i tried clearing my cache.
Any help please?
I am using stock recovery,unrooted phone,OOS 3.0.2
Hello, I own a Lenovo A6010, I recently tried to install a custom rom from a forum in this website, as i am newbie to all this, I think i screwed somewhere. Now my phone is stuck on boot screen. I cannot even start my phone in recovery mode or the menu that takes you to recovery mode.
Before flashing i had taken a backup of the dalvik cache and system and data and all those options available in the backup option in twrp which kept on my pc. Now i dont have any idea what do.
I even downloaded the stock rom of my phone from some website, but it was available in a rar file.
When I connect my phone with a cable while pressing the volume down button the same boot screen pops up and my computer starts to install device drivers. I think my phone can be brought back to normal, but i don't know how.
can someone please help me with some suggestions on what to do with my brick.
Thanks in Advance...
Warm regards
Do you have twrp installed? And by what method exactly did you try to install the custom rom?
Edit: Nevermind. Didn't realise this was a year old thread