There is a bug on my Qtec 2020(FW:166)-
when someone calls me no signal goes to my QTEC(But the beep signal goes from calling phone)-sometimes signal goes only at the end of the call,and i see a call as missed.
what is it :?:
It is difficult to say exactly what could be causing this kind of problem.
Might I suggest some troubleshooting tips?
1. Backup your device
2. Hard-Reset
3. Try some incoming calls to see if they work correctly.
4a. If 3 did not fix, try flashing your ROM with the newest version.
5a. If that solves your problem, re-install all of your programs and you are finished.
6a. If it does not solve your problem, you may have a hardware problem, contact the vendor.
4b. If 3 did fix your problem, re-install your programs one-at-a-time, giving time for testing between loading programs. Only after you have proven that call reception still works do you install the next program. In this way you determine if a program you have loaded is causing your problem.
HTH!
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
chriswo said:
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
Click to expand...
Click to collapse
YES.YOU ARE RIGHT.
From your list i installed only POCKET ZEN PHONE(but i also had this problem before i'v installed PocketZenPhone).
WINDOWS/STARTUP:
AFlashMan
CFlashMan
CheckAutorun
ChgDflnk
IA_Caller_ID(MAYBE THIS IS BUG :?: -but i have not it ins.on my QTEC)
MMReg
NFlashMan
poutlook
stk
TFlashMan
GUYS,Please,help...
So,what causes the bug :?: :roll:
I am running PocketZenPhone also, and do not experience this problem.
Unfortunately, I still believe that a HR is the only way you can prove that the problem is caused by software you have installed and not the hardware. It sounds drastic, but you must start from a clean PPC and prove that it works, then figure out which software is causing the problem.
ok,i'll soon try it.
BUT i wanna hear from chriswo what to do,cos he got the same bug. :arrow:
I've got a similar sort of bug, not sure what causes it though and its a pain,
I cant get the volume slider for the phone to stay above zero, i raise it and it beeps as i do it, and i close the volume control, open it againg and it back at the bottom, If i recieve an incomming call, all that happens is the screen flashes with the incomming call alert but no ringing tone at all?
how are the phone settings set ?
as in ring type ?
and how are the sounds and notifications settings
just checked them and they all appeared to be ok, but i wend back in and changed my ring tone and then tried to change it back and it said
'this ring tone is not working properly, You may want to choose a different one to use.'
Very strange, so i am now using oldphone as my ring tone and it is working perfectly!, looks like one of my ring tones has got corrupted somehow
I had the same problem also
Fix by HARD RESET.
At that time I try to test many Phone edition program. (on XDA 1 2002).
After that everytime when I try to install some new program, I'll backup my data first.
so,i still waiting for chriswo,cos he knows this sort of bug...
Lately I have had people telleing me they have called. But the phone showes no missed calls. Sometimes I also have calls from friend Ihave as contacts, but the sreen only keep showing Home-screen or just the locked screen.
Anyone with a similar problem and suggestions? I still run the 1.48.40.1 ROM - have had no reason for upgrade, until now??
Johan
Are you sure you have signal when they call, If there is no signal your phone wont show anything.
If you are having this problem when you have signal then I would suggest possibly a hard reset and see if that works.
You are right about the signal.
Problem is, to-day I had a call I didn't catch soon enough. It was ringing normally, but when finsihed, the phone showed no missed call, which it should have. So I had a clear "evidence" of some malfunction. But maybe I try a hard reset befor upgrading if no one else has other suggestions - seems a less fearful procedure...
do you have any mods installed like s2u2 or cht? or something similar that deals with calls or shows information on missed calls?
btw a hard reset will delete all your data so backup ( but dont use backups between rom versions)
not sure if this will help...but is your missed call notification disabled?
you can check in many ways, but the easiest is to go to the "Settings" tab in Sense...then choose "Sound & Display", then go into "Notification Sounds" under "Ring and Notifications" and make sure the "Missed call" option is set to "On".
Thanks a lot for the effort. Unfortunately, it was ON.. And it must be, if it does not turn itself on and off, then every other missed call does show up telling me so...
I somehow seem to have lost the ability to enter numbers on the dialpad when I'm in the middle of a call (to enter an extension, make a phone tree option, etc.). The numbers do make sounds when I'm not in the middle of a call (like to manually dial a phone number), and it certainly worked fine very recently, so I must have made some setting change, but for the life of me I can't find it. The "audible touch tones" options is turned on and every volume setting is set to max under "sound and display." Rebooting did not solve the issue. If anyone knows what I did and how I can get my tones back, I'd be very thankful. Thanks.
The only thing done to this phone is the revolutionary root method to get the tether app. While making an outgoing phone call to 2-3 different phone numbers, the phone would buzz to show it did connect. Then about a second later the screen goes back to the dialer screen. Any idea's??? Thanks.
Does the phone number you're calling have a +1 or other international code in front of the number? The dialer really doesn't like that. There should be a setting in the calls settings for plus code dialing where you should be able to adjust it. But I haven't been on a stock ROM for a while, so I can only assume it's there.
You can call sprint and have them reprovision (re-activate) your phone, that may help. The fact that you are rooted shouldn't have anything to do with problems making calls, thats usually a network issue.
I've had the same issue. Make a phone call and before it even dials it goes straight to lock screen. Or sometimes it does dial then stops the call and goes back to lock screen. I'm on CM7 so I just figured it was a poor signal causing mine. Sense roms do not seem to do this for me.
As the title says, when somebody calls me on one of my sip numbers and I'm on wifi I need to put the phone on speaker a number of times before I can start hearing anything from the call. After that it works but it might lose audio again at some later point and cycling the speaker setting brings it back.
I haven't noticed this before 4.4.2 and I can't reproduce it while on 3G. Any ideas?
Actually phone also directly drops the call or even reboots from time to time while doing this. Cool software, bro.
As a late update - I followed Samsung support's advice and reset the phone to factory defaults (from recovery) - then only installed a minimal set of programs and modified a minimal set of options. Receiving sip calls is still buggy or causing the phone to reboot.