Evo wont always stay connected to a call. - EVO 4G General

The only thing done to this phone is the revolutionary root method to get the tether app. While making an outgoing phone call to 2-3 different phone numbers, the phone would buzz to show it did connect. Then about a second later the screen goes back to the dialer screen. Any idea's??? Thanks.

Does the phone number you're calling have a +1 or other international code in front of the number? The dialer really doesn't like that. There should be a setting in the calls settings for plus code dialing where you should be able to adjust it. But I haven't been on a stock ROM for a while, so I can only assume it's there.

You can call sprint and have them reprovision (re-activate) your phone, that may help. The fact that you are rooted shouldn't have anything to do with problems making calls, thats usually a network issue.

I've had the same issue. Make a phone call and before it even dials it goes straight to lock screen. Or sometimes it does dial then stops the call and goes back to lock screen. I'm on CM7 so I just figured it was a poor signal causing mine. Sense roms do not seem to do this for me.

Related

Call waiting when dailing a number

Hello
When calling another person from my phone and if there are on the phone you will get call waiting as this way you now the person it on the phone.
I have tired it from another phone and it works but when i try it on htc hd2 it doesn't come up saying call waiting. Where as the person it on a call.
It was a very useful thing to have on phone. Is there a reg key i can change or cab file??
I think that if you are dialing, you do not have call waiting. This is also true for fixed lines. This is the only time your caller can get a busy tone.
But home phone nowadays operate like cell phones, and do not really send out the DTMF until you press the talk button. As a result, the dialing process beomes so quick that it does not matter much.
Alex
For example
If I am dialling your number and while you are already on another call with someone else than it will come up on my phone call waiting.
This way I now you are on the phone.
It use to work from my nokia phone but I am not sure if that option is available in winmo

dialpad not working during call.

Pretty much like the title says.. when I make a call the dialpad box is grayed out and I can't brink it up. Getting annoying due to the fact that I cant get rid of the voice mail icon or enter pin numbers or anything along those lines.
Anyone have any ideas? I looked for a setting that would enable/disable this, but couldnt find anything.
I know it worked before.. so could an app or something I recently added have disabled it somehow?
When did this start and what were you doing just prior to this problem? Are you rooted?
yes, phone is rooted.
Really hard to say when it started. Ive done some more tests.. Any number I call, including random numbers(like 1234) will bring the dial pad up. only time It doesn't show the dial pad is when I call Softbank's(Japan) voice mail(1416).
Ive even tried to bring up the dial pad, like im going to be making another call, and it wont make the tones that notifies the voice mail service to do anything.
so I guess the question is, how does the phone know to activate the dial pad when you make a call?

Incoming call issue

I am having a issue where someone will call me and for them it will ring till voicemail, but the call wont register on my phone that it recieves a call, so the person will have to call me a couple of times to finally have my phone register the call.
I am curious if this is a issue with tmobile or just my phone. It doesnt happen all the time, but when it does its kind of annoying. And its been happening on multiple builds, be it desire, miui, or gingerbread. I am not sure if there is a possible fix for this or not, but if anyone else has this issue feedback would be awsome
bump bump
if you are using a sense rom maybe you turned on "blocked callers"?
right now i am using a miui rom. and block callers would still register on my phone, it would just take a few tries so it wouldnt be a blocked caller

N9005 no voice when receiving sip calls on wifi

As the title says, when somebody calls me on one of my sip numbers and I'm on wifi I need to put the phone on speaker a number of times before I can start hearing anything from the call. After that it works but it might lose audio again at some later point and cycling the speaker setting brings it back.
I haven't noticed this before 4.4.2 and I can't reproduce it while on 3G. Any ideas?
Actually phone also directly drops the call or even reboots from time to time while doing this. Cool software, bro.
As a late update - I followed Samsung support's advice and reset the phone to factory defaults (from recovery) - then only installed a minimal set of programs and modified a minimal set of options. Receiving sip calls is still buggy or causing the phone to reboot.

Dialer Delay Bug?

Does anyone have this issue? When ever I am dialing out, there are times it seems like the call is going through, but I have to "end" the call so the call initiates... Its odd, but generally after that my calls are fine. Doesn't matter if its through Bluetooth, wifi calling, or regular calls through the phone itself.
How can I fix this if there is a fix? Running latest OTA, NMJ51B via Sprint.
~~Tito~~ said:
Does anyone have this issue? When ever I am dialing out, there are times it seems like the call is going through, but I have to "end" the call so the call initiates... Its odd, but generally after that my calls are fine. Doesn't matter if its through Bluetooth, wifi calling, or regular calls through the phone itself.
How can I fix this if there is a fix? Running latest OTA, NMJ51B via Sprint.
Click to expand...
Click to collapse
I've had this happen across a couple of phones with the Google Dialer... And actually with a Samsung just before I got my PH-1...
Happens every day to me
~~Tito~~ said:
Does anyone have this issue? When ever I am dialing out, there are times it seems like the call is going through, but I have to "end" the call so the call initiates... Its odd, but generally after that my calls are fine. Doesn't matter if its through Bluetooth, wifi calling, or regular calls through the phone itself.
How can I fix this if there is a fix? Running latest OTA, NMJ51B via Sprint.
Click to expand...
Click to collapse
Nope
I've had happen several times where after dialing (regular phone app) and it shows the call "connected", it takes about 5 to 10 seconds or so before there is any audio. Once the other end had already answered before the audio comes on, but usually I hear the ringing after the delay. Doesn't happen all the time. I don't make many phone calls out.
I usually see the app hang at the end of the call. Not all the time about once every day or two.

Categories

Resources