There are a lot of threads I'm sure but I recently Odin dk28 and accepted ec05. I checked for ota and it never came thru so I found a site and dl the update. Simple rename and went to factory recovery and installed.
I was worried about a data wipe this way but it did not. It installed perfectly and is running great. No data loss. Took me 15 mins total.
After trying all gbread leaks and many countless roms this ota seems to be working very well on the old epic. Breathes life back into it.
Linpacks 18ish and quadrants 1700+ for me w 24 apps. Overall very very happy for a stock phone. The epic should have had this a long time ago
yepper, just dl'd and I am impressed. All around worth the wait update. Doubt we get anything else, but it'll keep me happy....till I update to a new phone.
Any chance you have the link for where to download it. Would like to do it for my girlfriends phone
link
Rene2.5RS said:
Any chance you have the link for where to download it. Would like to do it for my girlfriends phone
Click to expand...
Click to collapse
I uploaded the zip I downloaded to update to 2.3.5
You need to apply this to a stock Froyo EC05 phone via stock recovery.
https://docs.google.com/open?id=0B8DFupwiCOXyZGY2MzU4ZGUtNDlkNS00ODVhLTg3MTMtYjUyMzI1MGY4MGU1
It is in my google docs folder.
If google asks you to login; just use a different browser than IE. I have it set as public but it seems IE and google docs don't talk well.
Rename that zip to update.zip and copy it to the sd card, turn the phone off and boot into stock recovery. Then choose install from update.zip
Good luck
Thanks for the link, I got it. My only question is I don't remember the recovery boot up sequence, I have an EVO and if I remember correctly the Epic has a 3 button press to get there...
Sorry I know this is extremely noobish sounding, but I have never messed with her phone outside of loading DK28
Are there random reboots? That was the only thing holding me back from going to gb
Sent from my SPH-D700 using Tapatalk
flashed the update zip and had ei22 b4 it came ota but being stock it runs pretty good i think. cant wait for devs to work on gettin roms all bugfree
Rene2.5RS said:
Thanks for the link, I got it. My only question is I don't remember the recovery boot up sequence, I have an EVO and if I remember correctly the Epic has a 3 button press to get there...
Sorry I know this is extremely noobish sounding, but I have never messed with her phone outside of loading DK28
Click to expand...
Click to collapse
Turn phone off. Hold volume down, camera, then power button til the Samsung logo and bottom compactive keys light up. Bam! You're in recovery.
Sent from my SPH-D700 using xda premium
Write-protected file?
When I try to move the file to my SD card it says the file is write protected. I have no idea what that means. Any clues anyone?
i am sooooo annoyed with this ota because my phone hasnt recieved it yet!!!! ive manualy update the firmware and android like five times a day since i herd it was released but still no luck i know that i can get the update from the forums but i just want to feel the satisfaction of getting it OTA after months of WAITINGGGG for this to be released i dont just want to cheat and get it the easy way... anybody else with me or should i just stop being stubbern and get the update files?
I got notice for ota update but I when I tried it, no update available.
Related
When I woke up this morning my phone prompted me to install the long awaited update to 2.2.1. Now that I've installed the new OS my phone is dreadfully slow! To the point where it's almost unusable. Anyone else experiencing this problem after updating? Any solutions?
Thanks,
-Adam
Try a factory reset.
Sent from my HTC Magic using Tapatalk
DonJuan692006 said:
Try a factory reset.
Sent from my HTC Magic using Tapatalk
Click to expand...
Click to collapse
There is no longer a Factory Reset option in SD card & storage settings; what is going on with my phone?!!? AHHHHHHH!!!!!!
I called tech support and they told me an alternate way to perform the factory reset. Power Off, Hold Home+Power button for 20 sec, etc. Gonna try that and hopefully my phone will work properly.
Thanks for the help,
-Adam
Root it post the System dump and come back tomorrow for the fast version.lol
Factory data reset location
adam79 said:
There is no longer a Factory Reset option in SD card & storage settings; what is going on with my phone?!!? AHHHHHHH!!!!!!
Click to expand...
Click to collapse
Sad story really. Factory data reset wasn't paying the rent and got evicted from SD card and phone storage settings. Now living under the Privacy settings bridge in a cardboard box. All because it couldn't be content with donuts and blew the the rent money on a frozen yogurt habit.
Kind Regards,
Kevin
kpetrie77 said:
Sad story really. Factory data reset wasn't paying the rent and got evicted from SD card and phone storage settings. Now living under the Privacy settings bridge in a cardboard box. All because it couldn't be content with donuts and blew the the rent money on a frozen yogurt habit.
Kind Regards,
Kevin
Click to expand...
Click to collapse
Wow. Creative!
Is there anyway to revert back to 1.6, or am I stuck with 2.2.1? I did the factory reset and the phone is running ok, but it ran much better before.
I'm having an issue with the browser.. My phone reboots when I open the browser and try to run a search, or while I'm typing in a website address. However, the phone is stable when I run searches or "go to" websites via the Google widget. Any suggestions?
Thanks,
-Adam
I had exactly the same problem.
I was quite happy with the speed of 1.6. Got the OTA update to 2.2.1 and I have hated the phone since! Rang HTC to see if anything can be done and as usual no returned calls etc.
I ended up rooting it and using setcpu to get it almost back to how it was but it still has its issues.
I would put a custom rom on but I dont want to risk bricking it just yet.
Download this, rename it to update.zip (not update.zip.zip), and put it on the root of your SD card. Boot into recovery, do the factory reset from there, then select apply update.zip from SD card. Let it do it's thing. The problem is that you did the factory reset AFTER installing, doing it before is the way to go. The file is the official update, so you'll just be re-installing it.
@creative, your past the hard part. Just download/install ROM Manager from Market, select "Flash Custom Recovery", reboot into recovery, wipe, and flash whatever ROM you want. Or just do the above to get the 2.2.1 working better.
DonJuan692006 said:
Download this, rename it to update.zip (not update.zip.zip), and put it on the root of your SD card. Boot into recovery, do the factory reset from there, then select apply update.zip from SD card. Let it do it's thing. The problem is that you did the factory reset AFTER installing, doing it before is the way to go. The file is the official update, so you'll just be re-installing it.
Click to expand...
Click to collapse
ummm im on a mytouch 3.5mm jack too. ive hadnt gotten the update yet. im rooted and using cm6.1. if i flash the .zip, will my root be gone? and will anything happen to my phone? thanks
adam79 said:
When I woke up this morning my phone prompted me to install the long awaited update to 2.2.1. Now that I've installed the new OS my phone is dreadfully slow! To the point where it's almost unusable. Anyone else experiencing this problem after updating? Any solutions?
Thanks,
-Adam
Click to expand...
Click to collapse
Do another factory reset and this time let it sit there (DON'T TOUCH IT!) for a solid 10-15 minutes after it gets to the sign-in screen. This is a very slow phone in the first place and there are all sorts of background processes and "thinking" going on the first time you boot up into new software.
I've flashed many roms on my old mt3g and this genuinely makes a huge difference. Try it.
Oh, and did I mention this phone is just slow in the first place? It is, and it has way too little RAM. Why on earth T-mobile gave us the 32B instead of 32A, I will never know...
guntcent said:
ummm im on a mytouch 3.5mm jack too. ive hadnt gotten the update yet. im rooted and using cm6.1. if i flash the .zip, will my root be gone? and will anything happen to my phone? thanks
Click to expand...
Click to collapse
Your not going to be able to flash the update.zip if your using CM 6.1, the install will just fail. You'll have to return the phone to stock using the stock sappimg, then apply the update. You will lose root, but you can get it right back using SuperOneClick. Nothing should happen to your phone unless something happens while its updating the radio, which is nearly impossible unless you pop the battery out or drop it or something of that sort during the update (same risk you run if you do the update OTA).
I had the same problem. Before I updated, I formatted the SD and wiped everything. I left the phone on the counter over night after flashing. 6 hours later and it was still pretty bad.
I just went back to stock and I'm going to try Gio's themed ota.
Edit: Gio's version is blazing. Just in case anyone was wondering.
Sent from my nuclear powered submarine!
DonJuan692006 said:
Download this, rename it to update.zip (not update.zip.zip), and put it on the root of your SD card. Boot into recovery, do the factory reset from there, then select apply update.zip from SD card. Let it do it's thing. The problem is that you did the factory reset AFTER installing, doing it before is the way to go. The file is the official update, so you'll just be re-installing it.
@creative, your past the hard part. Just download/install ROM Manager from Market, select "Flash Custom Recovery", reboot into recovery, wipe, and flash whatever ROM you want. Or just do the above to get the 2.2.1 working better.
Click to expand...
Click to collapse
Or you could rename the file to sappimg.zip and power the phone off and hold down the Volume Down + Power and press the Action button (which is just pressing the scroll ball) and it will take you phone back to your factory reset. Then you can root and install you ROM as mentioned above.
tidewaterns said:
Or you could rename the file to sappimg.zip and power the phone off and hold down the Volume Down + Power and press the Action button (which is just pressing the scroll ball) and it will take you phone back to your factory reset. Then you can root and install you ROM as mentioned above.
Click to expand...
Click to collapse
No you can't. That update depends on the 1.6 build. It's just patching the 1.6 build to 2.2.1, when your loading up a sappimg, it's looking to update all the partitions (e.g. SPL, recovery, radio, system, data, etc.). So, it won't work this way, and in reality, you should just get an error in hboot trying to run this as a sappimg.
Follow the advice on this attachment. My Magic was useless after update. While not perfect now, this helped a lot.
Steve
This thread is sad news to me.....I bought a mytouch last week on eBay expecting to do the froyo update to replace my blackberry 9700 that is having all kinds of issues after a few accidental drops. Sounds like I would be better off flashing it with one of the donut faster roms than going to 2.2
The stock rom provides stock performance and does work fine. Just need to wipe and give it time to finish running all the background processes to sync the Google bits.
I will say root and OC to 614 works wonders: I have been going back and forth between the 1.2 and Fender OTA ROM's making tweeks and have a stable, fast and battery effcient phone with both. Makes me wonder if other members coming from a CM rom or others with OC are basing a lot of their sluggish compliants (after the Google sync is done) from running at 528mhz.
Don't give up, just pop the hood and tweak to your liking.
Kind Regards,
Kevin
Sent from my T-Mobile myTouch 3G 1.2 using XDA App
2.2.1 ota froyo
pretty much the stock rom is evil made my phone choppy even after a full wipe and i let it boot completely i had to root my phone and put a new rom on there i suggest cm6.1 its stable and good for new rom/root users
Edit:yes the mt3g is old and the fastest i ever seen it was on a rom that wasn't OTA (over the air) its from 09 give it a break. a few months left then i can get a new phone with more ram im almost off my contract lol
Hello all,
Been rambling around the forums in ninja mode trying to gain enough knowledge to not mess up my phone before trying to mod it but alas best laid plans....
Anyhoo I was working to put the Froyo leak on my phone and everything was good till I did a cwm wipe of the phone and wammo it had problems. I managed to use Odin to get it back to barebones stock, lost my high score in Angry Birds too dang it.
Now that I am back to this point I tried to run the Verizin updates and it downloads and goes into install mode on reboot and it dies at Updating Modem section. At that point I saw I was rooted so I removed that and tried again, no dice amigo. Did a factory wipe, nothing. Cleared the cache, fail again.
If it helps its trying to do a dh12 to di01 update. Got any ideas?
When you went to stock did you flash the stock kernel and stock recovery as well? I had to do this when I updated to dl09
Good question and yes I believe I did, I followed this: http://forum.xda-developers.com/showthread.php?t=782204&highlight=return+stock thread to get the job done. Let me try it one more time.
Also I load the PIT file with each md5 correct?
Looks like I fixed it on the second time around. Not sure what I missed but the update went through. No worries. Might pay someone to hand hold my through getting DL30 on my phone cause even as an IT guy I'm missing something every time.
Strong thing is, once the DI01 update happens it actually doesn't find any other updates...wifi is off.
VZW pulled the DL09 update due to the e911 bug until it is fixed
Makes good sense. Sooo anyone wanna tutorialize me on how to de-crappify my phone? Its worth a donation from me.
You're on di01 right?
I would odin the dl09 package, then use cwm to flash super clean 2.2. Clean, debloated froyo goodness
Sent from my SCH-I500 using XDA App
Sounds good. The problem lies in me somehow fudging up the process at some point and having to set my phone back to stock again.
Where did you see this?
"VZW pulled the DL09 update due to the e911 bug until it is fixed"
Have any sources on this one? I really would like to see them.
Not doubting you, I have just been rebooting and *228 for 3 days trying to get this update only to see this quote...
VZW sent a message to all Fascinate owners the other night acknowledging the bug and a fix being in the works. Why would they continue to push it out after that?
Sent from my SCH-I500 using XDA App
Well...
0123456789
New EA update is being pushed out.
Verizon told me to go to a store as some phones will not accept OTA updates. Seems stupid and like a lie, but whatever...
Atst44 said:
"VZW pulled the DL09 update due to the e911 bug until it is fixed"
Have any sources on this one? I really would like to see them.
Not doubting you, I have just been rebooting and *228 for 3 days trying to get this update only to see this quote...
Click to expand...
Click to collapse
He's right. Google the source if you need it. Please don't take this response as me being snarky, I don't mean it that way.
I think the biggest issue people are having is not being careful and following the directions perfectly.
I was new two days ago and did this with only one hiccup.
1. I followed the Beginner's thread in this forum to get me rooted. First pass with Odin failed as the one click code didn't recognize the phone. 2nd pas worked. Trick was to just turn on USB debugging and plug in phone, do not then click the mount notification. Leave that off as USB debugging was all that was needed.
2. I installed Mod Manager and Titanium backup right after. This was part of the main directions and Titanium (though not mentioned) allowed me to save all my specific apps that had important data, like my 100% completed Angry Birds.
3. I then followed the directions in the developer forum for the How To.. install DL30 for Froyo. This scared me at first because the CW recovery stalled when wiping data. I waited over 30 minutes before getting the courage to pull the battery and start over. Figured its only deleting user data, should be ok. It was and then it worked the 2nd time without fail. I did reboot in normal recovery, but running the update.zip put it back into CW.
4. After that, I rebooted numerous times, checked all stock apps, upgraded firmware in camera, and used Titanium to add back my apps I bought or downloaded as well as restored my bookmarks and memo notes.
In the end I've had no bugs/issues as others have reported. Only functionality not tested is bluetooth as I don't use it for anything.
I hope this helps and if you are walking through it all again, I would be glad to help specific questions based on my experience.
I was DL09 stock OTA at first. I'd recommend getting rooted and using Odin to get the stock DL09 from these forums flashed before you try to put DL30 on. As a developer myself, it just makes sense to always put on builds that are in order of each other. So DI01, then DL09, then DL30.
0123456789
superchunkwii, thanks for the feedback. When I booted into cwm recovery mode it hung too. I think my fatal mistake was I booted in regular recovery mode and did my wipe....sad. I should have just rebooted and went back in cwm like you did.
As far as freezing apps I did not know freezing angry birds would save its data. Boy was my wife is mad (she plays it the most).
I did everything else on cue so I will try again and see how she goes. IT CAN BE TAUGHT! As the genie says.
On another note I did download the EA28 update today, can I install the DL30 Rom or do I need to "downgrade" to DL09 to get this done? Anyone try?
dlmcclou said:
superchunkwii, thanks for the feedback. When I booted into cwm recovery mode it hung too. I think my fatal mistake was I booted in regular recovery mode and did my wipe....sad. I should have just rebooted and went back in cwm like you did.
As far as freezing apps I did not know freezing angry birds would save its data. Boy was my wife is mad (she plays it the most).
I did everything else on cue so I will try again and see how she goes. IT CAN BE TAUGHT! As the genie says.
On another note I did download the EA28 update today, can I install the DL30 Rom or do I need to "downgrade" to DL09 to get this done? Anyone try?
Click to expand...
Click to collapse
1. Not freeze.. that makes it so app won't run. Backup with Titanium Backup is what you need I think.
2. What is EA28? I don't think the fascinate has had that build.
Just got an update EA28 any ideas what it does
Sent from my SCH-I500 using XDA App
EA28 build is the update to fix the emrgency dialing bug in DL09. As I understand, it is otherwise the same as DL09. I am by no means an expert though.
EA28 build is the update to fix the emrgency dialing bug in DL09. As I understand, it is otherwise the same as DL09. I am by no means an expert though.
Click to expand...
Click to collapse
Cool. Can anyone confirm this?
Just curious, I'm still waiting for my OTA
is anybody else still waiting?
my roommate and girlfriend have received theirs.
getting teased by both heh,
point is I don't know whats going on
Just do a manual update. I also got tired of waiting and took matters into my own hands and now I'm on 2.3.3
I have the CyanogenMod and I have to wait a little for 2.3.3... with the notification always show!!!
RrOoSsSsOo said:
I have the CyanogenMod and I have to wait a little for 2.3.3... with the notification always show!!!
Click to expand...
Click to collapse
CM7 has already merged 2.3.3, just flash one of the nightlies. As for the notification, there is an apk included within tiny GAPPS called FOTA Kill. Just flash that and you won't get any more update notifications.
it takes like 5 minutes to manually update
just put update zip on your sd card and name it update.zip
shut down, reboot while holding trackball, select bootloader then recovery
when it loads the screen with the ! on it press up and power and then just do Apply sdcard:update.zip
mattpannella said:
it takes like 5 minutes to manually update
just put update zip on your sd card and name it update.zip
shut down, reboot while holding trackball, select bootloader then recovery
when it loads the screen with the ! on it press up and power and then just do Apply sdcard:update.zip
Click to expand...
Click to collapse
This. It is so simple, I don't get why people don't do it.
Got my OTA last night about 10pm PST. Too bad I already have screen burn in otherwise the black status bar would have been nicer.
dveldt said:
Got my OTA last night about 10pm PST. Too bad I already have screen burn in otherwise the black status bar would have been nicer.
Click to expand...
Click to collapse
How does burn in effect black?
Sent from my Nexus One using XDA App
arghhh, the wait is killing me.
I don't get why some people are groaning that their OTA never came when they can actually manually update their phone. It's just a simple work of downloading the update source file from *official* Google link and after a few clicks and several reboots your Nexus One will be up and running with the latest Gingerbread update. All the download links and detailed procedures can be found all over the web so why not take the plunge?
hycian said:
I don't get why some people are groaning that their OTA never came when they can actually manually update their phone. It's just a simple work of downloading the update source file from *official* Google link and after a few clicks and several reboots your Nexus One will be up and running with the latest Gingerbread update. All the download links and detailed procedures can be found all over the web so why not take the plunge?
Click to expand...
Click to collapse
Yes it's very easy to manually update.
But I guess it's because it's nice to see the update notification.
Also, the OTA update is a little reminder for us that we don't need to use a computer to get updates.
I flashed a stock rooted 2.3.3 I just can't stand stock. Cyan7 ain't ready so I'm back on cyan6.1.1. I'm getting my update notification constantly for gingerbread while running cyan6! Didn't think it was possible. Wish it would go away tho
P.s. notification started yestarday. On t mobile in NJ
Sent from my Nexus One
i thought this is xda, where everyone flashes the update as soon as the link is out
Ok, so I updated from stock, using official update phone rebooted and stayed at samsung screen forever it kept blinking and vibrating. Pulled battery, tried restarting it goes samsung loading bar -> VM welcome -> flashing/vibrating samsung screen.....I can get into recovery AND download mode. Tried clearing cache, factory reset, and updating again, but still gets stuck at samsung screen. I am desperate guys I really need help, I am going on a LONG road trip this weekend and need my phone so ANY help would really be appreciated. THANKS!
When u say update do u mean u went from ex. 2.1 to 2.2.... android that is? U should elaborate a hit more, if what I mentioned is the case then revert back to the ROM prior to the update. If u give more info I may be able to help from my personal experiences
Sent from my HTC HD2 using XDA App
Yes used official update went from 2.1 (stock) to 2.2 as the update finished, it got stuck in a sort of boot cycle, stuck at a samsung screen keeps flashing samsung logo, and vibrating. wont fully boot
OK, I saw on my facebook page samsung intercept page. Mediafire link to download update.zip file,has anyone tried this. Will this work,if it bricks my phone i will be pissed...
There's always the chance that a phone can get bricked, no mater what ...even from an 'official' update from your service provider. With that said, however, I've downloaded the Virgin Mobile 2.2 Froyo update file that's floating around and it installed no problem on my phone.
For the first poster ....I believe that the stock recovery is necessary for the VM 2.2 update to work. I won't swear on that though.
Here's what I did. Downloaded the 2.2 VM Froyo update to my laptop. Renamed it 'update.zip'. Copied it to the root of my sdcard on my Intercept via bluetooth. Booted into recovery mode and applied the update. Twiddled my thumbs while it updated itself from recovery and then rebooted....and the reboot takes a while, maybe 5 minutes. Presto ...2.2 Froyo.
creativenate88 said:
Ok, so I updated from stock, using official update phone rebooted and stayed at samsung screen forever it kept blinking and vibrating. Pulled battery, tried restarting it goes samsung loading bar -> VM welcome -> flashing/vibrating samsung screen.....I can get into recovery AND download mode. Tried clearing cache, factory reset, and updating again, but still gets stuck at samsung screen. I am desperate guys I really need help, I am going on a LONG road trip this weekend and need my phone so ANY help would really be appreciated. THANKS!
Click to expand...
Click to collapse
I think that you didn't wait long enough...as the reboot takes a looooong time, maybe 5 minutes or more at least. Patience is a virtue.
Okay guys,im new here. I installed VM Froyo 2.2 update.zip,it seems to work fine. A bit slow but its still booting up. I installed stock rom,stock kernal, and update.zip,in that order. And backup works too,wiped dalvik cashe to. I like this forum its more informative,will let yall know more later. Thanks.
ajones23 said:
Okay guys,im new here. I installed VM Froyo 2.2 update.zip,it seems to work fine. A bit slow but its still booting up. I installed stock rom,stock kernal, and update.zip,in that order. And backup works too,wiped dalvik cashe to. I like this forum its more informative,will let yall know more later. Thanks.
Click to expand...
Click to collapse
You're making this way to convoluted. All that one needs to do when updating from stock 2.1 on the VM Intercept is to download the (official unofficial) update file, rename it to 'update.zip' on the root of the sdcard, boot into recovery, and apply the update. That's it. It installs Froyo and the new radio, etc, itself...all from the update.zip. No need to mess with kernels and recovery or wipe anything ....except one's own azz if they go take a chit while waiting for it to reboot. In fact, when I updated it even kept all of my 2.1 widgets and icons and imported them into Froyo ...I didn't need to do a thing.
Oh, I see ....you had to convert your Intercept back to 'stock' first. Nevermind...
Yes, i did i downloaded stock rom,stock kernal and stock recovery all .zip. Put stock.zips in sdx/zip folder and update.zip 2.2 in root on sdcard. Installed all three wiped dalvik cashe rebooted each time in custom recvery. When i got to stk rec. rebooted to stock rec. Ran update.zip 2.2 may take a while but it booted no problems.
Can u get the phone into download more with any button sequences, YouTube it if u don't know what i mean(mobiletechvideos) then y will need to use odin to use tp download an official Samsung Rom.... PM if u need help
Sent from my SGH-T959 using XDA App
hey people first post longtime reader any way i got my samsung intercept update
just fine saved all adw stuff and everything but i cant root anymore {big up to z4root} anyone can help?
sorry trying to delete my posts.
Love XDA but but for interecpt help Go to SDX forums
I just returned my MT4G to complete stock (s=on also) and it won't update past 2.2. Not even 2.2.1.... I believe gingerbread is out now for stock too. Please help. Thank you.
(I even did the checkin method a couple of times)
Just download and install the update via sdcard. That would be how they do it at tmobile stores anyways.
Here is how to update to 2.3.4 via sdcard
Legaleye3000 said:
I just returned my MT4G to complete stock (s=on also) and it won't update past 2.2. Not even 2.2.1.... I believe gingerbread is out now for stock too. Please help. Thank you.
(I even did the checkin method a couple of times)
Click to expand...
Click to collapse
1. Download the PD15IMG.zip file posted by Gr33nF0x http://megaupload.com/?d=N8XGHXJC
2. Put file on the root of your sdcard (don't put it in any folder)
3. go to settings/applications make sure fastboot is unchecked (on 2.2.1)
4. power off
5. push and hold volume down and power till you get into hboot
6. it will scan file when its done it should ask you to update push volume up
Any reason why it wouldn't update over the air? Also, is the gingerbread update widespread now, or is it still in selective updates...? Thanks.
Legaleye3000 said:
Any reason why it wouldn't update over the air? Also, is the gingerbread update widespread now, or is it still in selective updates...? Thanks.
Click to expand...
Click to collapse
You will get the OTA when they decide to push it to you or you can go to your local Tmo store and they will do it via sdcard or you can do what i posted witch that file is from a Tmo sdcard
Any way to do this but without wiping the phone? That's why I want the OTA...
Honestly a wipe isn't that bad.
Back up your contacts through your gmail, back up your photos/music/videos to your SD card if by default it isn't saved.
Sure it takes some time to get your apps back, it takes some time to set your phone up to the way you like it but it still serves its purpose doesn't it?
Its for my wife's phone...... ..............
Legaleye3000 said:
Its for my wife's phone...... ..............
Click to expand...
Click to collapse
and?
do what the above people have told you to do, ask your wife if there are any files she would like you to save currently on her sdcard. Common sense.....
Legaleye3000 said:
Its for my wife's phone...... ..............
Click to expand...
Click to collapse
I understand the frustration, I just spent about 4 hours the other night updating my sister's Vibrant to 2.2.1.
You could however wait for the push to your phone. Its there.
I did this with my my touch 4g before getting the vibrant, and the 2.2.1 ota came instantly... I'm wondering if something went wrong that would cause it not to receive the ota instantly like MY MT4G...
I can't wipe her phone again because I just did 2 days ago when returning her phone from rooted custom rom back to stock. She just set her phone up the way she wanted...lol. Oh well, I'll just wait for the ota (hopefully nothing is holding it back). If it were my phone, I don't care about wipe.