Hi all!
I have a big problem - last 10 hour see everything, but my problem no ansver -
hd2 eu version! I try install android!
1. step: install hspl
2. setep: Run task 29 format nand
and after I hold down key and power on and the telephon no step the bootloader mode!
I try some tips but no one cant help for me!
I try but evry try dont step boot loader!
Please help some one
You mean you completed step 1 of installing HSPL, and step two of doing task29 and after that you couldn't get into bootloader?
If yes, How did you manage to get into bootloader in the first two steps?
Marvlesz said:
You mean you completed step 1 of installing HSPL, and step two of doing task29 and after that you couldn't get into bootloader?
Click to expand...
Click to collapse
Yes
I try wol down and power but dont step bootloader
every time I tried, did not want to enter the bootloader. It would be nice if someone could help. This is one of my friend's phone and is often installed with my own, but there was no problem!
Now you have to enter it every time I try to not let you. Simply do not enter!
first time
i start the hspl4 and work is normaly wreck the phone no problem next step i run task 29 an run normaly and after is no step in to the boot loader
Are you using windows mobile 6.5?
Marvlesz said:
Are you using windows mobile 6.5?
Click to expand...
Click to collapse
yes before i start this metod i using winmo 6.5.
Just what I thought, I assume you have mistaken activsync in winmo for the bootloader. And since Task29 removes your WinMo rom that means no more activesync to flash roms. And you thought being on the blank htc screen and pressing vol down would get you to activesync.
If my assumption is correct then do the following:
Turn off your phone, Hold the "Volume Down" button .. and turn on your phone, release it when you see a tri-colour screen. From there, connect the USB cable and flash as if you were in ActiveSync.
---------------------------------------------------------------------------------------------------------------
EDIT
There is no reason for your phone to not go into bootloader after you have successfully flashed hspl and task29 except this.
I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance
Taller2222 said:
I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance
Click to expand...
Click to collapse
I have tried them!
Despite the bootloader screen, but you are not willing to appear!
You do not want to come if you would have to go the wrong thing, but so I can not connect to the computer usb.
Taller2222 said:
I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance
Click to expand...
Click to collapse
Are you doing this while the phone is off?
Or you're doing this while you're on "HTC Screen" ?
Are you sure you have successfully flashed HSPL and done Task29 ?
Taller2222 said:
I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance
Click to expand...
Click to collapse
You are trying to get to the tri-colour screen, yes? Where the screen has 3 colours?
1. Power off phone
2. Remove battery
3. Hold vol down key
4. Insert battery WITHOUT LETTING GO OF VOL DOWN
5. Power on phone WITHOUT LETTING GO OF VOL DOWN
6. Enter bootloader mode
Marvlesz said:
Are you doing this while the phone is off?
Or you're doing this while you're on "HTC Screen" ?
Are you sure you have successfully flashed HSPL and done Task29 ?
Click to expand...
Click to collapse
the flash is successfull install the hspl an task29 too. I sure tis fact
The telephon akkumlator is off an beck and i try volume down + power on and no stem bootloader
jwchips said:
You are trying to get to the tri-colour screen, yes? Where the screen has 3 colours?
1. Power off phone
2. Remove battery
3. Hold vol down key
4. Insert battery WITHOUT LETTING GO OF VOL DOWN
5. Power on phone WITHOUT LETTING GO OF VOL DOWN
6. Enter bootloader mode
Click to expand...
Click to collapse
Its not work i try so many time in this method
Nobody has any extra ideas on how to throw into bootloader mode! I have been completely used up.
I have tried several methods, but none of them took me to success! : S
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Hi every one!
The problem is not resolved! Everything is done as it is in the descriptions. Probably the volume down buttons on the problem, or around it.
I decided to take it doctor uncle, so I already had treatment for the doc!
Thank you very much everyone for your help and advice. If I learn what went wrong and how can this be remedied share with everyone, if someone in that position would not be a problem any more! Or just do not be nervous: S
Have a nice day everyone!
You read this thread yet you missed a crucial post i think; a possible solution is offered there:
T-Macgnolia said:
You may have a faulty volume button ribbon that is causing you not to be able to boot into the bootloader. Check out this thread you will see what I mean. Read post #10
Click to expand...
Click to collapse
It very much sounds like your situation...
Diegis0n said:
You read this thread yet you missed a crucial post i think; a possible solution is offered there:
It very much sounds like your situation...
Click to expand...
Click to collapse
Thanks
I see this post befor, but i don't like disassemble the Phone Monday night is finish! (say the doctor) And i don't have another flex cable, i can't try this at my home.
But thank's the post and everything.
Found the problem!
The bootloader is delete from the ram -need JTAG, this day is ready the phone!
I do not use anymore task29
Taller2222 said:
Found the problem!
The bootloader is delete from the ram -need JTAG, this day is ready the phone!
I do not use anymore task29
Click to expand...
Click to collapse
glad you found where your problem lay.
But for your information, Task29 does not wipe off your bootloader
Related
I was on Radio 2.10.50; i fashed radio 2.07.50 everithing was fine after the flash; then i run TASK29 by doloop; but after that the bootloader dont start, only the HTC star screen appears, i have to pull out the battery to reset the phone, and restart with the volumne down button pressed but still the same i tried almost 20 times but still the same.....
PLEASE SOMEONE HELP ME.....i flashed almost 40 times before and run TASK 29 before but this never hapened, im desesperated.....
take your battery off, wait 20 seconds. Put battery back in, hold Vol- and push power. ou will be at the 3 color screen. Connect the USB cable, get the 'USB' text below and flash a ROM.
Obviously you have HSPL, on the phone, right? you were able to do task 29..
bigE
Bootloader wont charge
Yes i have HSPL, but after the TASK 29, i think it have been deleted, now the bootloader does not exist, i tried pushind down and reseting the volume down, but without the bootloader, it wont start.
Maybe if i run a SHIPPED ROM from the SD card...???
dannytgt said:
Yes i have HSPL, but after the TASK 29, i think it have been deleted, now the bootloader does not exist, i tried pushind down and reseting the volume down, but without the bootloader, it wont start.
Maybe if i run a SHIPPED ROM from the SD card...???
Click to expand...
Click to collapse
i don't think run Task29 will delete bootloader. You should wait for better advices from someone in here before you try something else that you are not sure.
nope, that is not possible. Unless you have a malfunction with the phone, there shouls be a bottloader..
Do you hold Vol- (keep your finger on) at all times? you should not leave the button until phone wakes up at bootload. The power button can be pushed and be left after about 0.5 a second.
Another wild idea- maybe you battery is dead? try charging it for 15 minutes..
Thanks
Thanks for your advices man, im doing it, but nothing appears to work, im seriously deseperating, i dont know why the bootloader dont start.
Even more, before i run TASK 29, i ve entered bootloader directly pushing down the volume key and everything was fine; but now it seriously appear that the bootloader have been deleted or even i can acces it.
Ive read some other similar cases; and a lot report the same problem, after flashing a new radio, and then runing the TASK29, the bootloader,apparently have been deleted.
About the battery
About the battery, i also think that was the posible problem,because, it was abouth 60% when i flash the radio; and when i run TASK 29, i dont see how much it was,because, ive entered bootloader directly; but ive charged for about 1 hour and still the same the bootloader wont charge, i only get the damn HTC screen.....
I was thinking about flashing shipped rom fom the SD card, but thing it be imposible because to do HSPL (bootloader) is needed, and or my bootloader has deleted or is imposible to acces it so i think that will be a useless option
Posible solution
I think one posible solution was to install HSPL from SD card again; but i think it is imposible...but seriously i wish i was wrong about it.
OK then, try to flash a stock ROM, although i doubt you can.. Maybe you VOL- button isn't really pushed in? I am running out of ideas.. I have HTC phones for several years and never lost the bootloader. By definition the bootloader is a different component on the phone's board, and oe can not write to it from the USB interface (normally it is hardwire write protected). Do you have another battery? or did you try charging a bit?
dannytgt, what model of your device?
I think the answer is simple. When you ran Task 29, did u put the desired Radio in the same map? was it Called ruu_signed.nbu? if you didnt, that would explain why you have no bootrom.
I would run it again but this time with the latest radio in the same map. I hope it works for you man.
GL
TheOne741
BigE said:
OK then, try to flash a stock ROM, although i doubt you can.. Maybe you VOL- button isn't really pushed in? I am running out of ideas.. I have HTC phones for several years and never lost the bootloader. By definition the bootloader is a different component on the phone's board, and oe can not write to it from the USB interface (normally it is hardwire write protected). Do you have another battery? or did you try charging a bit?
Click to expand...
Click to collapse
you're right i cant install stock rom; i tried pushing the volume button every way posible, i ve charged the battery for about 3 hours exactly...still the same..
dannytgt, what model of your device?
Click to expand...
Click to collapse
HTC HD2 Euro Version, i was running Touch X-treme ROM
I think the answer is simple. When you ran Task 29, did u put the desired Radio in the same map? was it Called ruu_signed.nbu? if you didnt, that would explain why you have no bootrom.
I would run it again but this time with the latest radio in the same map. I hope it works for you man.
GL
Click to expand...
Click to collapse
You re right when i run Task 29, i dont have put the Radio in the same folder; i flashed the Radio separately, and then i Run TASK 29.
I tried to run it again. but its imposible, because I DONT HAVE THE BOOTLOADER, so its imposible....
i really apreciate your ideas, i really thanks all of you guys and i hope you will still sharing any ideas about unbricking my phone.
It gets really hard to get a phone like this in my country, i ve done a lot of effort...to have this phone...so i still dont give up about leaving it like that
TheOne741 said:
I think the answer is simple. When you ran Task 29, did u put the desired Radio in the same map? was it Called ruu_signed.nbu? if you didnt, that would explain why you have no bootrom.
I would run it again but this time with the latest radio in the same map. I hope it works for you man.
GL
TheOne741
Click to expand...
Click to collapse
The radio is not needed to start the bootloader.
Well, strange issue with your phone. You really can't enter the bootloader by holding vol down press power on and keep holding vol down?
There MUST be some kind of boot loader. i think without there would be a white screen.
If it is not opening in Boot loader try flashing rom using sync process if your hd2 is booting to Os. otherwise that is only way other have described you. Take battery out . Wait for 5 minutes. Put battery in n press Vol Down button and press power on button. your phone should on in Boot loader .
Some time it happens with me also. but automatically after 2-3 tries it loads in boot loader menu.. dont know what is the problem.. but whatever it is.. IS Strange..
Good Luck
Have you tried hard resetting your phone by holding both the up and down volume when you start? Task 29 deleted the rom so you will need to flash a rom, but if you cant enter bootmode, thats not possible..
Your problem seems to be quite unique. Almost makes me think it is the volume down button that is not responding well...
do you have your battery cover on when trying to press the volume down button?
If yes, try it without the battery cover on
The radio is not needed to start the bootloader.
Click to expand...
Click to collapse
Yes, i have used TASK 29 before, and no need for radio in the same folder;
Well, strange issue with your phone. You really can't enter the bootloader by holding vol down press power on and keep holding vol down?
There MUST be some kind of boot loader. i think without there would be a white screen.
Click to expand...
Click to collapse
I tried for about 100 hundreds time, but nothing happens, so i say before, when i useTASK 29 i've used the bootloader using the volume hardware keys, and it works perfectly
If it is not opening in Boot loader try flashing rom using sync process if your hd2 is booting to Os. otherwise that is only way other have described you. Take battery out . Wait for 5 minutes. Put battery in n press Vol Down button and press power on button. your phone should on in Boot loader .
Some time it happens with me also. but automatically after 2-3 tries it loads in boot loader menu.. dont know what is the problem.. but whatever it is.. IS Strange..
Click to expand...
Click to collapse
I ve tried syncing directly with PC, but it's imposible...totally useless the phone doesnt sync.
This **** never hapened to me before.....i've done a lot of times and the bootloader was always there....
Have you tried hard resetting your phone by holding both the up and down volume when you start? Task 29 deleted the rom so you will need to flash a rom, but if you cant enter bootmode, thats not possible..
Click to expand...
Click to collapse
yes, i've done this also, the power button does not respond; so i pull out the battery and then i put while pressing the vol key down...nothing happens....still no bootloader
do you have your battery cover on when trying to press the volume down button?
If yes, try it without the battery cover on
Click to expand...
Click to collapse
Yes i've also tried this
Your problem seems to be quite unique. Almost makes me think it is the volume down button that is not responding well...
Click to expand...
Click to collapse
Right now im on my girlfriend's house, but by afternoon i will disamble the phone so i'll activate the vol key down directilly, to run out the hardware key malfunction posibility
Thanks again, all of you guys, i ll try every advice you give me
I cant acept that my HD2 is killed.....but the options are finishing.
It's so ****ing rare, even i've scaped from my HD2 get stolen, a few times and now it gets kill by me...
dannytgt said:
I think one posible solution was to install HSPL from SD card again; but i think it is imposible
Click to expand...
Click to collapse
correct, impossible.
The phone wont go past the grey screen because there is no rom to load. Bootloader has NOT been overwritten,. task29 cannot do that.
Chances are you simply aren't entering bootloader correctly.
Take off the battery cover (to get a better press)
phone completely powered off.
press, hold and keep holding 'volume down' (not up and down, not up, just down)
tap AND RELEASE (dont release vol down) the power button
keep holding vol down
as soon as the three coloured screen appears, then release vol down.
once the word serial changes to usb, flash your rom.
i have a feeling your Vol Down button is not working. that's why its not entering bootloader. u going to disassemble your phone? hmm...be careful with that.
Bricked HD2
Would you be willing to ship it to me? I could have some fun trying to figure some stuff out since you're not having any luck.
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
When you turn on your phone what happens? What screen dow it take you to? What does it say when trying to run android? .......and for future notice this is the comnplete wrong section for this....and some more info regarding device, hspl, radio would be helpful too.
oh word? ... try this
1..first download the official wm 6.5 rom from tmobile or http://www.htchd2forum.com/general-...SID=799c9ce6abe4e3ddc05368f8432db509#msg22469
2...second remove the SD card and connect the phone to ur computer
3...hold the down volume + power buttom till u see 4 colurs and them run the tmobile official rom... let me know what happens
it doesn't boot up anymore, I will post again when I have it booting again.
All have to do is to download an htc official rom and connect ur Htc hd2 to
computer and flash it
Good luck
Sent from my HTC HD2 using XDA App
phaverkamp said:
it doesn't boot up anymore, I will post again when I have it booting again.
Click to expand...
Click to collapse
connect the phone to ur computer
hold the down volume + power button till u see 4 colors and them run the tmobile official rom... let me know what happens
In the name of the wee man.
Post this in the right bloomin' topic.
The Mods have just spent an age reorganising this whole corner of XDA and what do you do?
Bugger it all up.
Well done.
At least you are consistent, you buggered your phone and the forum. Bravo.
phaverkamp said:
it doesn't boot up anymore, I will post again when I have it booting again.
Click to expand...
Click to collapse
Can you seriously follow anyone's instructions given man? Quit trying to boot the phone. Connect the phone with your PC via the USB cable. Hold down the "volume down" key and the "power" key at the same time. Tell us if you see the tri colored screen.
phaverkamp said:
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
Click to expand...
Click to collapse
Have you checked the battery contacts? They bend very easy, and the symptoms you describe are exactly those of that. If they are bent, VERY, OH SO VERY CAREFULLY straighten them up. If one or more are broken, I hate to tell you this, but you need to buy a new phone.
phaverkamp said:
after flashing to 14 jan mdj. my hd2 crashed after 1 day of use. After that I can't boot into android or use USB. I think I even can't charge the phone. I don't see the red led. Andy ideas for fixing it? Try a new battery? It doesn't start up anymore, but it did a few times and said 12.fatal hit when booting android. I haven't tried Tricolour because I can't start it up anymore
Thanks,
Click to expand...
Click to collapse
I think you have wrongly done the Clock Work Mod which shows the 123Fatal Hit error and ur hd2 remains stuck there. Your HD2 is not crashed at all just charge it with an external charger then go to bootloader by pressing n holding Volume Down key and Power button until you the triple coloured screen, then connect your data cable to HD2 and flash it with a stock windows mobile rom so it will restore ur hd2 and after that u can install nand rom on it by following each and every step mentioned in tutorials here. Whenever I select boot AD SD after flashing partition layout I always get 123Fatal error now I don't understand what the problem is....If someone has a solution for this problem please reply in this thread as I don't want flashing through DFT method.
Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike
With phone off hold down volume down button and press power button for a couple seconds.
Sent from my HD2
First of all, wrong section to post... should be in Q & A.
Second of all, if above doesn't work, Vol up + down instead of just vol down.
dont work!
no reaction from hd2! it goes only to the MAGDLR menu!
Miketheboy1 said:
dont work!
no reaction from hd2! it goes only to the MAGDLR menu!
Click to expand...
Click to collapse
In MAGLDR do the volume buttons allow you to scroll up and down? If not, maybe your volume rocker took a **** on you?
help!
how to recover the phone if the volume rocker is indeed stuck?!
I presume you have a correct radio version.... ? That causes hang at boot.
crisisinthecity said:
In MAGLDR do the volume buttons allow you to scroll up and down? If not, maybe your volume rocker took a **** on you?
Click to expand...
Click to collapse
Yes it allows up and down! my volume buttons are not defect!
samsamuel said:
I presume you have a correct radio version.... ? That causes hang at boot.
Click to expand...
Click to collapse
Yes i have the correct radio version!!
I have 2.15
And if its not the correct version, how can i install a new version of RAdio, if i can not go inside to the bootloader menu?
Without the Bootloader Menu i cant do something! i am clueless! I tried really everything!
Miketheboy1 said:
Yes i have the correct radio version!!
I have 2.15
And if its not the correct version, how can i install a new version of RAdio, if i can not go inside to the bootloader menu?
Without the Bootloader Menu i cant do something! i am clueless! I tried really everything!
Click to expand...
Click to collapse
There should really be no reason you cant boot into bootloader if your volume buttons are working properly. turn phone completely off for 10 minutes turn phone on then hold volume button down till you boot into bootloader screen. I think you are holding volume button down slightly before your phone is turning on.
No reaction! im again in the MAGDLR menu....
please help! I have the same problem. Volume keys work, but I cant get into tri color bootloader. Nor can I load any nand rom, just stuck on HTC logo! please help me !!!!
Hold down the power and volume down button until bootloader shows up
2.15 radio
2.2miui stock via cwm
did u try hr ? hold volume up/down together and power on the phone.
Miketheboy1 said:
No reaction! im again in the MAGDLR menu....
Click to expand...
Click to collapse
Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear
WarlockW said:
Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear
Click to expand...
Click to collapse
I tried it! with the RED BUTTON!!! but it doesnt help...
And i tried it too with UP/DOWN...
I have no chance to go inside to the tricolor menu.
And if i want to boot again, its the same logo which not disappear
I dont understand how it works with Windows Phone 7 but not android...
And if i Install WIndows Phone 7 i can not join to the TRicolor Menu too!!!
Miketheboy1 said:
I tried it! with the RED BUTTON!!! but it doesnt help...
And i tried it too with UP/DOWN...
I have no chance to go inside to the tricolor menu.
And if i want to boot again, its the same logo which not disappear
I dont understand how it works with Windows Phone 7 but not android...
And if i Install WIndows Phone 7 i can not join to the TRicolor Menu too!!!
Click to expand...
Click to collapse
same here...I paid full price for this phone...really need some help...cotulla i know u can save us!!
shehrammajid said:
same here...I paid full price for this phone...really need some help...cotulla i know u can save us!!
Click to expand...
Click to collapse
yeah man.... im in the same situation! at the moment i have windows phone 7!! omg -.-
Miketheboy1 said:
yeah man.... im in the same situation! at the moment i have windows phone 7!! omg -.-
Click to expand...
Click to collapse
OK so after doing a TON of research and having spurts of false hope, I have figured out that the phone is indeed bricked. There is only one person in US that I know who can save it and he uses jtag. Here is his link. Send him a pm describing your situation and he'll help you out. I recommend him!!!
http://forum.xda-developers.com/member.php?u=416436
i already wrote!
its my last chance
I was trying to install blackSTONEhengeHyPerSlim_4_1 on my blackstone. I installed olinex and after that stored the nbh and exe file on the sd card and then through task 29 flashed it. The rom got successfully installed but now the phone is stuck at the bootup. It says
Checking Radio...
Checking protocol..
Checking Rom..
But now won't get to the next screen.Because of this i can't get to active sync. Please help..Pleaaaasseee
Did u follow the instructions completely, cause it worked fine for me and others... Do you have radio 1.14 or above installed? Did u try to reflash?
ok, no need to worry. Boot into bootloader. What is your SPL?
Yes i did follow the instructions. Now the phone won't bootup. I tried it with the volume down and power up method. Rom does get installed but then again it won't bootup..
Did you try Vol UP + Vol Down + Power ?
Yes i did try that after my phone got screwed up with test29 method but it shows nothing at all after successfully installing rom..:-s
no need to worry
always read read read and must read before flashing. I think your phone is quite ok. You does task29 to it. what is task 29 means. it means task29 will clean our device completely only splash screen displyaed, phone always stucked on this screen. it is very normal, it means you completyely cleaned your device. now you are ready to flash your device. do the following procedure--
1. remove the battery and reinsert it.
2. now turn on the phone while pushing volume down key.
then bootloader (tricolor screen) mode will be displayed. many times it will not come into bootloader and device normally starts and stuck on splash screen. the reason is simple, you didnt press volume down key properly, it happend many times to me also.
Now remove battery cover, remove battery and reinsert it, dont cover the battery, now take slylus & press volume down strip with the stylus. ( volume up & down keys are installed in battery cover, so when you push volume down key in flap open condition, it should be done by stylus.)
ok
push volume down by stylus & hold it and start the device, it will come in tricolor screen means bootloader mode, on the bottom screen it will show serial.
Now conect the device to the pc & bottom line on the screen will become serial to USB.
Now perform task28= means flash normal rom, do not perform task 29 again.
task29 will take 1 minute to flash while normal RUU will take about 7-8 minute.
try it and give feedback/
kulwant said:
Yes i did follow the instructions. Now the phone won't bootup. I tried it with the volume down and power up method. Rom does get installed but then again it won't bootup..
Click to expand...
Click to collapse
Have you flashsed a differnet radio ?
What you did is just Task29 your phone. Task29 needs something to flash in order to do its thing. Usually we flash radios (good ones obviously) because they are smaller than full roms. If you flash a full rom with Flash29, it will get erased after completion.
What you need to do now (since your phone now has no ROM installed) is boot it while pressing volume down to get to the bootloader, plug via USB and flash a rom using a "non-task29" flasher, like the standard BlackStoneCustomRUU.exe file that comes with basically every rom.
Hello thanks for replying my internet wasn't working but i did manage to boot my phone but now the touch stops working after. I know this as i press the volume button and the phone responds to that hence telling me it's not really freezed up. This is all what i did.
Stored .nbh file in the task 29 folder this is the rom version whose nbh file is used (RUU_Duttys_HD_V3.9__XT_Turbo_5.2.21051.1.6.4_1.59.709.0_Radio_52.62.25.34_1.14.25.24_)
After the flashing is done i reset the phone by taking out battery and starting it again in bootloader.
Now i flashed again with (blackSTONEhengeHyPerSlim_4_1)
After installing it completely the touch stops responding.
Kindly help me with what seems to be the problem. Thanks
kulwant said:
Hello thanks for replying my internet wasn't working but i did manage to boot my phone but now the touch stops working after. I know this as i press the volume button and the phone responds to that hence telling me it's not really freezed up. This is all what i did.
Stored .nbh file in the task 29 folder this is the rom version whose nbh file is used (RUU_Duttys_HD_V3.9__XT_Turbo_5.2.21051.1.6.4_1.59.709.0_Radio_52.62.25.34_1.14.25.24_)
After the flashing is done i reset the phone by taking out battery and starting it again in bootloader.
Now i flashed again with (blackSTONEhengeHyPerSlim_4_1)
After installing it completely the touch stops responding.
Kindly help me with what seems to be the problem. Thanks
Click to expand...
Click to collapse
Hi mate.
I did somthing for you....so i hope it will helps you.
1. download file from this link. http://hotfile.com/dl/115059516/5623431/Radio_1.13.xx(original_hd_nbh)__task29.rar.html and after unrar.
2. Make task 29 with this one. (Nothing change in that unrar folder)
3. After finished T29, take uot battery, put it back, put device to BootLoad. screen.
4. Connect with PC again and flash your desided ROM. (it means if you choice your rom, after unrar or unzip, Rom has own folder with that all files ...BLACIMG.nbh, BS_CustomRUU.exe, etc......
thanks i'll just download and do it..Will definitely post in what happened...Thanks a tonne for the quick response..
kulwant said:
thanks i'll just download and do it..Will definitely post in what happened...Thanks a tonne for the quick response..
Click to expand...
Click to collapse
...It's ok mate, like i wrote, i hohe, it 'll helps you.
let me know after....
Any new good looking rom you would suggest for me to try that would be bugfree ???
kulwant said:
Any new good looking rom you would suggest for me to try that would be bugfree ???
Click to expand...
Click to collapse
.... for beginning: T29 finished ok?
for your guestion: Hmmmm, for me...really good ROM is from Cloudyfa, but objectively, it's up to you, which one from this site you choice.
The link you gave me says
This file is either removed due to copyright claim or is deleted by the uploader.
:-s
kulwant said:
The link you gave me says
This file is either removed due to copyright claim or is deleted by the uploader.
:-s
Click to expand...
Click to collapse
Yeas mate, i deleted it. I was thinking, that you download this file already and saved it to your PC.
LoL it's all cool it takes a while i got 512kbps..I got the stock rom from xda page
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
This one's fine right
kulwant said:
LoL it's all cool it takes a while i got 512kbps..I got the stock rom from xda page
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
This one's fine right
Click to expand...
Click to collapse
Yes that one is fine. Once T29 is complete take out battery and then re-insert it. Now put phone into bootloader (hold vol down and press power on while still holding vol down. BOOTLOADER IS A TRI-COLOUR SCREEN).
Now flash your rom
i also flashed blackstonhenge hyperslim 4.6 and now touchscreen stopped working....any solution...
Hey Guys. I was hoping someone could help me with my problem.
Currently my HTC HD2 is running cyanogenmod7 using MAGLDR 1.13.
I want to switch back to winmo 6.5 to start fresh and have read tutorials that i need to enter bootloader ( the red, white, green screen thingy) to establish a connection with activesync. But the problem is that i can't actually get into bootloader and i have tried volume down button with the power button combo and it doesn't seem to work.
If someone knows how to get to bootloader then please help.
While the phone is off... do what you did... hold power and volume down buttons...
Yes, i tried that 20 times and it doesn't work
Roger9546 said:
Yes, i tried that 20 times and it doesn't work
Click to expand...
Click to collapse
Does the volume down button work on your HD2? Sounds like it does not.
That's the strange part. My volume buttons work perfectly in Android and Magldr. I don't know what's happening
switch off the phone and open it again while you are holding the end call button
you will go the magladr menu , i thik you can find something there to take to the bootloader
the_entity said:
switch off the phone and open it again while you are holding the end call button
you will go the magladr menu , i thik you can find something there to take to the bootloader
Click to expand...
Click to collapse
No no no no no and NO!!!!!!!!!!!!
There is nothing in MAGLDR that can make your HD2 go into bootloader. The only this.g that can get you into the bootloader besides the external hardware buttons is the bootloader.exe that can be run from inside Windows Mobile. It can only be run from inside Windows Mobile. MAGLDR is a custom bootloader that runs after the HSPL bootloader and has no way of communicating with the HSPL bootloader.
At the OP, you may have a faulty volume button ribbon that is causing you not to be able to boot into the bootloader. Check out this thread you will see what I mean. Read post #10
Boot loader mode
Bootloader mode is handy for checking the HD2's version of Hard SPL as well as the installed ROM and Radio versions,and also for ROM or Radio flashing to the HD2. I sometimes use the Bootloader method to flash ROMs as it saves connecting to Activesync/WMDC because the PC recognises the HD2 as connected via USB. It is also useful for flashing a ROM or Radio version if the battery charge is less than 50%, as it ignores the 50% charge warning that is normally displayed when flashing if the HD2 is low on charge. Never use this method if you have less than a 30% charge as you will be in deep trouble if the HD2 runs out of power while flashing a ROM or Radio version!
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.
AlexALP said:
Bootloader mode is handy for checking the HD2's version of Hard SPL as well as the installed ROM and Radio versions,and also for ROM or Radio flashing to the HD2. I sometimes use the Bootloader method to flash ROMs as it saves connecting to Activesync/WMDC because the PC recognises the HD2 as connected via USB. It is also useful for flashing a ROM or Radio version if the battery charge is less than 50%, as it ignores the 50% charge warning that is normally displayed when flashing if the HD2 is low on charge. Never use this method if you have less than a 30% charge as you will be in deep trouble if the HD2 runs out of power while flashing a ROM or Radio version!
To place the HD2 into Bootloader mode, remove the HD2's back cover hold down the volume down key, now press in the red reset button under the back cover to the bottom left of the SIM, release the soft reset button but continue to hold the volume down key in until you are presented with the tri colour bootloader screen. To exit Soft Reset the device.
Click to expand...
Click to collapse
Hi!
I try this so many time, but my hd2 does not step in bootloader. Have you got some other idea??
I have exactly the same problem, help!
Roger9546 said:
That's the strange part. My volume buttons work perfectly in Android and Magldr. I don't know what's happening
Click to expand...
Click to collapse
Can you get into the windows start- settings - system? If yes, there is an app that says "clear storage memory", which brings you back to the factory settings when you bought it. It's worth a try.
Entering bootloader screen is sometimes difficult: press and hold the volume down button and then press shortly
the power button, this should bring you to this screen. If it does not, remove your battery for at least 10 minutes and try again.
Good luck and regards, Kuzibri
I had the same problem ...
I could not enter the bootmanager in android brief button press to end a call, we moved the menu to shut down, reset, etc, the same menu that appears when you hold down the button longer to stop calling ...
This defect appeared to me after I lay HD2 due to large changes in ambient temperature ...
After a few days of research, opening, drying I removed the defect, so I pulled out and cleaned the keys below the screen (Home, Menu, Back, red and green) and wipe the foil that these pressures are the same buttons ...
My HD2 has been working for 2 weeks with no errors
same here but ...
to get in to bootloader i just discovered a different (strange)way ... from winmo , with back cover off press red reset button and imediately while reseting press volume down ... this is my only way to get in to ... otherwise , all the keys are fully working when in windows mobile .
very strange
all the keys includind the volume down key, works well inside windows, but I just cant go to bootloader.
I will dismante the phone, wash it and dry it, to see if something changes,
I have problem getting into 3 color bootloader also, but its because my voulme down is broken/ doesn't work anymore. Any other ways besides the volume down button?
Jcamacho228 said:
I have problem getting into 3 color bootloader also, but its because my voulme down is broken/ doesn't work anymore. Any other ways besides the volume down button?
Click to expand...
Click to collapse
only if you are currently running winmo 6.5, , theres a winmo app to restart into bootloader.
alternatively, dismantle the phone and short the voldown connections.
bootloader&spl
How to enter bootloader(tricolor scren) on hd2 t-mobile-usa, i tried wth vol down key but no respns. I thk may be another key for hd2 t-mobile-usa. Does any one know? Or thr is no Spl with ths stock rom...if so, how to instal Spl on hd2 t-mobile(1024) or stock rom wth Spl so that i can instal Hspl... Thanx
foysyl said:
How to enter bootloader(tricolor scren) on hd2 t-mobile-usa, i tried wth vol down key but no respns. I thk may be another key for hd2 t-mobile-usa. Does any one know? Or thr is no Spl with ths stock rom...if so,
Click to expand...
Click to collapse
phone off
press and hold voldown
tap and release power
keep holding voldown.
No, the tmous doesn't use a different method than the regular hd2.
how to instal Spl on hd2 t-mobile(1024) or stock rom wth Spl so that i can instal Hspl... Thanx
Click to expand...
Click to collapse
all stock roms include an spl, i think YOU mean ''or stock rom with hspl.''', , no, there are no stock roms that include hspl.
there is only one way to apply HSPL, , and that's through bootloader.
bootloader prob. on hd2 usa
How to enter bootloader(tricolor scren) on hd2 t-mobile-usa, i tried wth vol down key but no respns. I thk may be another key for hd2 t-mobile-usa. Does any one know? Or thr is no Spl with ths stock rom¡*if so, how to instal Spl on hd2 t-mobile(1024) or stock rom wth Spl so that i can instal Hspl¡* & whr i can get bootloader.exe for hd2 - wp6.5
Thanx
---------- Post added at 05:54 PM ---------- Previous post was at 05:30 PM ----------
But cant get its bootloader by holding vol down key wth power key at a time thn pres reset butn.
Is thr any soft/bootloader.exe for entering hd2's bootloader through pc or frm phn(hd2-usa)? If so thn pls giv the link. Or is needed to re-instll stock rom over prsnt stock rom
Thnx([email protected])
---------- Post added at 06:12 PM ---------- Previous post was at 05:54 PM ----------
samsamuel said:
only if you are currently running winmo 6.5, , theres a winmo app to restart into bootloader.
alternatively, dismantle the phone and short the voldown connections.
Click to expand...
Click to collapse
Need ths App...pls giv me the download link
Try this!
Hi, I had a similar problem where I could not enter the boot loader. The solution I found that worked for me was provided by: broncogr on another thread discussing a similar issue with the DHD ( http://forum.xda-developers.com/showthread.php?t=889567 )
"restart the phone
when the capacitive buttons light is off immediately press and hold volume - button and keep holding until device is in bootloader
cheers " - broncogr
Hope this helps someone.
Ez