HELP ME PLEASE…!!!
Friends, I followed all the steps to install WP 7 with Jayce tutorials,
and everything installed fine but when I wanted to update from V.7592 to V.7720 with the instructions in this tutorial the following happened:
SCREEN PC:
Error:
Update device 008b09f4 – 053e87a1 – 34d89ca2 – acdc466e Complete with error code: 80180048, error message: Error de instalación de la IU (Actualización de imagen) debido a un error.
SCREEN HD2:
Storage card not working
Your storage cart has changed is
damaged or is non-compliant.
To fix this, turn off you phone and either
remove the storage card or replace it with
a new compliant card. Then you’ll need to
reset your phone to the original factory
settings.
To reset your phone, refer to the owner´s
manual.
As I can solve this problem?
HELP ME PLEASE!!!
THANKS
Jelmut
Anwar,
You dont have an option, just reformat your card using a Nokia phone,
reinstall WM6.5,Magldr and then reflash WP7.
If You dont want to flash WM6, then do a task29, and flash WP7 using Magldr way.
shreedharcva said:
Anwar,
You dont have an option, just reformat your card using a Nokia phone,
reinstall WM6.5,Magldr and then reflash WP7.
If You dont want to flash WM6, then do a task29, and flash WP7 using Magldr way.
Click to expand...
Click to collapse
shreedharcva:
I am new to this, can you explain, please?
Regards.
Jelmut
Have you tried hard-resetting it?
Yeah, try hard resetting and WP7 should recapture the SD card.
How to hard reset when WP7 won't boot due to SD card issues?
Turn on device > during Magldr when 12345 GO! GO! GO! appears, press and hold vol up/down until grey screen > press vol down twice to perform hard reset.
After reset is complete, go to Settings > About and confirm that it's part of the total storage space. If it's not, hard reset until it is. Worse case... you may need to reflash, but that shoudln't be necessary.
anseio said:
Yeah, try hard resetting and WP7 should recapture the SD card.
How to hard reset when WP7 won't boot due to SD card issues?
Turn on device > during Magldr when 12345 GO! GO! GO! appears, press and hold vol up/down until grey screen > press vol down twice to perform hard reset.
After reset is complete, go to Settings > About and confirm that it's part of the total storage space. If it's not, hard reset until it is. Worse case... you may need to reflash, but that shoudln't be necessary.
Click to expand...
Click to collapse
Friends, try Hard reseting ...
Appeared gray screen, press VolDown (x2) and remains unchanged
This operation will 1. Delete all your personal data, and reset all settings to manufacturer default. 2. Calculate CRC checksum. Press VolDown to restore manufacturer default, or pres VolUp to get CRC, or press other keys to cancel.
Restoring... wait for complete.
Restore complete.
Press Volume Down to restart
No I have a Nokia phone to format the card, says shreedharcva ...
Now I can do?
Thanks
Jelmut
If you hard reset WP7, it will reformat the card.
If you use a Nokia phone, it will reformat the card.
Whatever option you choose, you will lose the data on the SD card.
anseio said:
If you hard reset WP7, it will reformat the card.
If you use a Nokia phone, it will reformat the card.
Whatever option you choose, you will lose the data on the SD card.
Click to expand...
Click to collapse
I try Hard Reset … no results
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
This appears when I press VolDown - Power button
You can format the memory card without using a Nokia Phone?
....................................
Press the VOL Up / Down did these codes
BL CRC - 0xAD7E7D82
OS CRC - 0x1FA3CC4F
OS (SI) CRC - 0xFC3584FA
Do not know if it works for some
It's no way, you must format your SD card with a Nokia phone, Anwar.
phong1892 said:
It's no way, you must format your SD card with a Nokia phone, Anwar.
Click to expand...
Click to collapse
Find someone who has a Nokia phone ...
Jelmut Anwar said:
I try Hard Reset … no results
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
This appears when I press VolDown - Power button
Click to expand...
Click to collapse
You did not understand my instructions and did it wrong.
1 - Power on the HD2
2 - Wait for Magldr
3 - When magldr starts to boot WP7, you'll see the screen say "12345" "GO! GO! GO!"
4 - While the 12345 is appearing, THEN press volume up AND down AT THE SAME TIME.
5 - You'll get a grey screen that tells you to press vol down to reset...
This is what you did wrong:
When you turned on the HD2, you pressed vol down. The opened the bootloader (tri-color) screen. This is not the correct place to reset WP7.
You MUST perform the reset after Magldr starts to boot WP7 and not before magldr starts at all.
Try it again. If you do it right, it will work.
anseio said:
You did not understand my instructions and did it wrong.
1 - Power on the HD2
2 - Wait for Magldr
3 - When magldr starts to boot WP7, you'll see the screen say "12345" "GO! GO! GO!"
4 - While the 12345 is appearing, THEN press volume up AND down AT THE SAME TIME.
5 - You'll get a grey screen that tells you to press vol down to reset...
This is what you did wrong:
When you turned on the HD2, you pressed vol down. The opened the bootloader (tri-color) screen. This is not the correct place to reset WP7.
You MUST perform the reset after Magldr starts to boot WP7 and not before magldr starts at all.
Try it again. If you do it right, it will work.
Click to expand...
Click to collapse
My new SD card will come tomorrow. Can I just put in the new card and do this or do I have to re-flash back to 6.5 and start again?
tw33k said:
My new SD card will come tomorrow. Can I just put in the new card and do this or do I have to re-flash back to 6.5 and start again?
Click to expand...
Click to collapse
No matter what card you use, you must do this.
You cannot put a new card in without doing a hard reset, and you cannot unlock a card like what you've got now without doing it either.
So, you have to hard reset to fix your current card and then use dev_storagelock to unlock it and format it on your computer.
And... you have to do a hard reset anyway when you start using the new card.
Might as well do them both. You should not have to go back to WM6.5 to solve any of these problems. I made that mistake once and it takes hours to reflash and update. Not worth it.
I don't know why it took you hours. I went back to 6.5 then flashed to the ROM I'm using now in like 10 minutes. Thanks for the tip about changing SD cards tho. I'll give it a go tomorrow
tw33k said:
I don't know why it took you hours. I went back to 6.5 then flashed to the ROM I'm using now in like 10 minutes. Thanks for the tip about changing SD cards tho. I'll give it a go tomorrow
Click to expand...
Click to collapse
I have the updatable yuki ROM. So, it's not just flash-n-go. I flash 7004 then update to 7720. That takes about 1.5hrs to do.
anseio said:
I have the updatable yuki ROM. So, it's not just flash-n-go. I flash 7004 then update to 7720. That takes about 1.5hrs to do.
Click to expand...
Click to collapse
I see. The upgrading of the SD card worked perfectly.
tw33k said:
My new SD card will come tomorrow. Can I just put in the new card and do this or do I have to re-flash back to 6.5 and start again?
Click to expand...
Click to collapse
Enter MAGLDR ... try Hard Reset
and I turned on the (tri-color) screen:
LEO 1000 HX-B3 (2K)
NSPL0.96.2250.0
MicroP (LED) 0x05
MicroP (TOUCH) NA
SD NONE
Partition Info-v211v413
It´s correct???
NEWS
anseio said:
You did not understand my instructions and did it wrong.
1 - Power on the HD2
2 - Wait for Magldr
3 - When magldr starts to boot WP7, you'll see the screen say "12345" "GO! GO! GO!"
4 - While the 12345 is appearing, THEN press volume up AND down AT THE SAME TIME.
5 - You'll get a grey screen that tells you to press vol down to reset...
This is what you did wrong:
When you turned on the HD2, you pressed vol down. The opened the bootloader (tri-color) screen. This is not the correct place to reset WP7.
You MUST perform the reset after Magldr starts to boot WP7 and not before magldr starts at all.
Try it again. If you do it right, it will work.
Click to expand...
Click to collapse
Enter MAGLDR ... try Hard Reset
and I turned on the (tri-color) screen:
LEO 1000 HX-B3 (2K)
NSPL0.96.2250.0
MicroP (LED) 0x05
MicroP (TOUCH) NA
SD NONE
Partition Info-v211v413
It´s correct???
No! You have to wait for 12345 to start to appear, then immediately press volume up and down at the same time.if you get the Terri color screen then you've done it wrong
Jelmut Anwar said:
Enter MAGLDR ... try Hard Reset
and I turned on the (tri-color) screen:
LEO 1000 HX-B3 (2K)
NSPL0.96.2250.0
MicroP (LED) 0x05
MicroP (TOUCH) NA
SD NONE
Partition Info-v211v413
It´s correct???
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA App
Jelmut Anwar said:
Enter MAGLDR ... try Hard Reset
Click to expand...
Click to collapse
Did you see my post above yours?
Related
My friend gave me his HD2. The problem is he doesn't remember the lock screen code. I have an Evo 4G and figured I could load the HD2 into the "hboot" and reset it. I figured out the buttons I have to push and sadly its not working. I hit the Vol. Up and Vol. Down + the power button and all it does is start up. I haven't seen the multicolored screen I'm supposed to be seeing. I don't care how it has to be done, I just need this phone unlocked lol.
Thanks, Tyler
31794ty said:
My friend gave me his HD2. The problem is he doesn't remember the lock screen code. I have an Evo 4G and figured I could load the HD2 into the "hboot" and reset it. I figured out the buttons I have to push and sadly its not working. I hit the Vol. Up and Vol. Down + the power button and all it does is start up. I haven't seen the multicolored screen I'm supposed to be seeing. I don't care how it has to be done, I just need this phone unlocked lol.
Thanks, Tyler
Click to expand...
Click to collapse
To perform a HTC HD2 Leo hard reset with buttons you should turn off the phone, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it. After that follow the instructions.
I tried that and it just starts up. It never goes into the reset screen.
Take the battery cover off and make sure your getting a good amount of pressure on both volume buttons.
If its still not working sounds like you might have a broken button.
Can you get to bootloader by holding only vol down and then powering on?
I tried it and it didn't work. crap...
Any other ways to get this thing reset?
i have the same problem.
i cannot connect to any pc and cannot get the phone into reset mode.
im running energyROM which has problems. it won't turn off.
ideas how to wipe this sucker?
azreal8 said:
i have the same problem.
i cannot connect to any pc and cannot get the phone into reset mode.
im running energyROM which has problems. it won't turn off.
ideas how to wipe this sucker?
Click to expand...
Click to collapse
Yes go to settings, I can not remember wich one it is under but it is a option in settings somewhere to do a factory reset that is what you are looking for. I am running Android now so I can not find it in my HD2, but it is there just look for it.
azreal8 said:
i have the same problem.
i cannot connect to any pc and cannot get the phone into reset mode.
im running energyROM which has problems. it won't turn off.
ideas how to wipe this sucker?
Click to expand...
Click to collapse
Unpack official (no Custom ROMs working) ROM to a folder on your PC, rename file RUU_signed.nbh to Leoimg.nbh, copy it to root directory of microSD card (preferrably less than 2GB ands Fat32 formatted), insert it in your phone (turned OFF), hold VolDown key and shortly press power button. Phone will start in bootloader mode and you have to press power button again to start flashing.
After end of flashing make a HR and enjoy.
T-Macgnolia said:
Yes go to settings, I can not remember wich one it is under but it is a option in settings somewhere to do a factory reset that is what you are looking for. I am running Android now so I can not find it in my HD2, but it is there just look for it.
Click to expand...
Click to collapse
It is in the system settings called "Wipe Device" in my NRG ROM. I've seen it called "Clear Storage".
stevedebi said:
It is in the system settings called "Wipe Device" in my NRG ROM. I've seen it called "Clear Storage".
Click to expand...
Click to collapse
Thanks for the assist on that one man. Me not having Win Mo on my HD2 kinda makes it hard to give precise answers on Win Mo now
im having the same issue.
i wipe the device using the menus but it's still stuffed.
it won't get to the reset screen when i press the vol up/down and press the power
button OR when using other methods.
my phone is cactus.
funnily i'm running nrg as well.
Check post #9 and try to follow intructions.
azreal8 said:
im having the same issue.
i wipe the device using the menus but it's still stuffed.
it won't get to the reset screen when i press the vol up/down and press the power
button OR when using other methods.
my phone is cactus.
funnily i'm running nrg as well.
Click to expand...
Click to collapse
Flash a new NRG ROM, and do NOT use XDA_UC. A flash removes everything in memory. Then you can see what is causing your issues by manually installing the cab files in XDA_UC. You should also install everything possible to the SD card to save space in system memory.
Also, check the memory BEFORE restoring contacts & etc. Those .vol files in the root directory can take up a lot of space.
pvii said:
Unpack official (no Custom ROMs working) ROM to a folder on your PC, rename file RUU_signed.nbh to Leoimg.nbh, copy it to root directory of microSD card (preferrably less than 2GB ands Fat32 formatted), insert it in your phone (turned OFF), hold VolDown key and shortly press power button. Phone will start in bootloader mode and you have to press power button again to start flashing.
After end of flashing make a HR and enjoy.
Click to expand...
Click to collapse
I can flash the stock ROM by using 16GB Class10 card successfully.
The card was formatted by HD2 previously.
pvii said:
Unpack official (no Custom ROMs working) ROM to a folder on your PC, rename file RUU_signed.nbh to Leoimg.nbh, copy it to root directory of microSD card (preferrably less than 2GB ands Fat32 formatted), insert it in your phone (turned OFF), hold VolDown key and shortly press power button. Phone will start in bootloader mode and you have to press power button again to start flashing.
After end of flashing make a HR and enjoy.
Click to expand...
Click to collapse
You can flash a custom ROM via SD card just the same as a official ROM it does not matter. You still have to have HSPL on hour HD2 first though or it will fail.
thx guys...
i can get it to the boot screen now.
must have had gunk build-up in the buttons or something.
i have downloaded the "T-Mobile_HD2_MR_Software_3.14.531.1" rom from T-mobile.
it's an .EXE file though.
QN: how do i get the RUU_signed.nbh as i need to reflash from my SD card.
azreal8 said:
thx guys...
i can get it to the boot screen now.
must have had gunk build-up in the buttons or something.
i have downloaded the "T-Mobile_HD2_MR_Software_3.14.531.1" rom from T-mobile.
it's an .EXE file though.
QN: how do i get the RUU_signed.nbh as i need to reflash from my SD card.
Click to expand...
Click to collapse
Rename the .exe to .zip and then you can right click it and view the contents of the file. You will see the RUU file you need to copy and rename.
thx.
i'm now at the red, green, blue and white screen after holding down the vol and pressing power on.
i cannot get it to get to the boot loader stage to flash the image though.
the screen stays on
"pB881120 SS-B3
SPL-2.08.HSPL 8G XE
0x5
cotullaHSPL 0x40"
Serial"
any ideas where i've gone wrong?
azreal8 said:
thx.
i'm now at the red, green, blue and white screen after holding down the vol and pressing power on.
i cannot get it to get to the boot loader stage to flash the image though.
the screen stays on
"pB881120 SS-B3
SPL-2.08.HSPL 8G XE
0x5
cotullaHSPL 0x40"
Serial"
I
any ideas where i've gone wrong?
Click to expand...
Click to collapse
If you took the RUU_signed.nbh file and copied it then renamed it leoimg.nbh and placed it on the root of your SD card. (it has to be on the root of our SD card) Then the bootloader should automaticly say searching on the screen and then promt you to press the end button if you want to flash the image.
Just in case you do not know what the root of your SD card is. It is what you see when you first pull up your SD card in your phone or on the computer. The leoimg.nbh can not be in a folder on your SD card.
sorry for my bad english
ihave hd2 t mobile
after ubdate my mobile from android nand room to win mobile 6.5
i made a task 29
ubdate to win mobile 6.5 by mu computer
the ubdate give me 100% and back to boot loder
i try hspl and it work 100% and back to boot loder
i try ubdate by sd card and the update give me sucsses and compleat and back to bootloder
i try many rooms for t mobile
when i use task 29 or hspl or any ubdate it seems to be done but after that
my hd2 back to boot loder .
iam sorry for my bad english ..........but blz i need some help ..
some help plz
so your handset bootes into the tri colour boot loader even if you dont hold down the volume key?
yes my handset bootes into the tri colour boot loader even if i dont hold down the volume key
any help with my problem
basemhanafy said:
any help with my problem
Click to expand...
Click to collapse
Yeah it sounds like your volume key is broken you will need to get it fixed.
volume key is not broken its from the task 29 update
Not really understood your problem. It is likely you have run Task 29 (which formats your phone memory), and never install any new ROM (neither WinMo 6 nor Android)?
i update my phone from winmo 6,5 to android nand after 5monthes
when i try to back to winmo 6.5 now
i use task 29 to format my phone ......after that when i press the power my phone go to boot loder ...i try to flash with winmo 6.5 using my pc and after done ....my phone back to boot loder......i try flash winmo by sd card and give me sucsses on the screen but when i power my phone he boot to boot loder ......i try to flash mglder 113 by my pc and it done sucssesful ....and when i power my phone it go to bootloder...
when the phone is off and i connect the computer cable it power to boot loder.....i dont press the power
if i insert the sd card with leoimg and power the phone it go to boot loder and start flash the room and give me compleet and sucsses...
but when i power the hd2 it go to bootloder agin and agin and agin....
plz help
Take the windows rom and rename it to "leoimg.nbh" then put it on root of your sd card. When you next go into bootloader it should flash your phone.
As previously said, it sounds as though your Volume Down button is faulty.
You may not be pressing the Volume Down button but it may be making contact and when you press the Power Button it will send the phone into BootLoader Mode.
when i press volume up and vol dowe together and press power the phone go to format screen
but when i press volum up it go to boot loder
if my volum down is prokin ...my phone must go to format screen..
befor i use the task 29 my volume key is working good
Remove the SD Card.
Put it into Bootloader Mode -what does it say on the screen?
Does it fully boot up without SD Card?
when i remove sd card the hd2 boot into boot loder
Put it into Bootloader Mode -what does it say on the screen?
my problem is.. the hd2 is boot to bootloder every time i press the power
and when i make update via pc or sd card the update is sucssesful...
..........................................
my phone Appears to be sound except that he boot to boot loder every time
Be sure that the vol dowen is sound.
basemhanafy said:
my problem is.. the hd2 is boot to bootloder every time i press the power
and when i make update via pc or sd card the update is sucssesful...
..........................................
my phone Appears to be sound except that he boot to boot loder every time
Be sure that the vol dowen is sound.
Click to expand...
Click to collapse
Dude, If you insist on ignoring simple questions or ignoring them how do you expect anybody to try and help you?
I apologize for the inappropriate response...........................
so sorry for my bad english
.........................................................................................................
the screen is like this
................................
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
Cotullahspl 0x50
.................................
basemhanafy said:
I apologize for the inappropriate response...........................
so sorry for my bad english
.........................................................................................................
the screen is like this
................................
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
Cotullahspl 0x50
.................................
Click to expand...
Click to collapse
Might be an HSPL bug, I would flash stock rom from SD, this will replace your stock SPL back on, then flash HSPL again, then try your ROM.
orangekid said:
Might be an HSPL bug, I would flash stock rom from SD, this will replace your stock SPL back on, then flash HSPL again, then try your ROM.
Click to expand...
Click to collapse
As I advised earlier but it got ignored.
Have been using dual boot (wp 6.5 & Android) for 5-6 months. Android stopped working from sd card. Decided to try wp 7. Installed LEO70_ROM, got product key from Microsoft for Windows Live, downloaded and installed Zune. Everything was great. Got message to upgrade. Thought nodo or mango would be better. Now I have no phone. I tried unsuccessfully to go back to wp 6.5, to upgrade. Yes I know I screw up, yes it's my fault, but it has been fun learning new things and it will probably cost me something in the end. Here is where I'm at and what I've tried.
1)Power on w/o sd card-Get triangle w/ Software update failed. Please try again.
2)Power on w/empty formatted sd card-above for 1 sec then jumps to bootloader with: HX-B3; SPL-3.03.0000 XE; MicroP(LED) 0x05; MicroP(TOUCH) 0x40 displayed.
3)Power on w/vol down-opens bootloader. Same as #2 w/RUUNBH in upper right and PB81120 before HX-B3; Upgrade ROM code error; please try again, Serial.
Microsoft Device Manager does not recognize phone, hard reset acts same as #2 above, errors out when I try to run HSPL or custom radio. Reformatted sd card (not sure about partitions-created primary). I would appreciate any help. Thks
have you tried to flash stock WinMO 6.5 rom from SD card?
download stock rom for your HD2
extract *.nbh file from exe and copy it on SD card, naming it LEOIMG.nbh
boot while hold vol down..
if this fails, i have no other options on my mind...
if it works, it overwrites everything.. so you ought to have stock WM6.5 and then you can go flashing again
Have you tried:
1 - take the battery out for a minute
2 - power the phone on, holding down the volume down button to boot into bootloader
3 - flash a stock 6.5 ROM
If this works, then you'll need
1 - to flash a .50 radio (2.12.50 etc...)
2 - flash magldr 1.13
3 - flash the backto the future WP7 rom by XboxMod and Yuki. The LEO70 ROM is the original WP7 ROM from DFT and isn't updateable via Zune
Thanks for the info. I tried to flash 'T-Mobile_HD2_MR_Software_3.14.531.1' but I think I need an earlier version. The only one I could find was a .exe file. Do you have a link to the correct one?
Jack567 said:
Thanks for the info. I tried to flash 'T-Mobile_HD2_MR_Software_3.14.531.1' but I think I need an earlier version. The only one I could find was a .exe file. Do you have a link to the correct one?
Click to expand...
Click to collapse
if this is the right file for your HD2, then open it with WinRAR or 7-zip. Inside you'll see NBH file. Then follow what o wrote
and, make sure that this is corret rom file for your HD2.
Thanks, Yes it it the correct rom. I downloaded it from Tmobile support. Called HTC to see if there was a different rom and they said that was the only one they had available. To fix it they said I would have to replace the motherboard and flash the rom. When I try flashing the rom I get a white screen with 'Loading...' . Nothing happens then.
Jack567 said:
Thanks, Yes it it the correct rom. I downloaded it from Tmobile support. Called HTC to see if there was a different rom and they said that was the only one they had available. To fix it they said I would have to replace the motherboard and flash the rom. When I try flashing the rom I get a white screen with 'Loading...' . Nothing happens then.
Click to expand...
Click to collapse
Have you tried task29?
Use task 29 to clear everything, guide here http://forum.xda-developers.com/showthread.php?t=644781 then go to HTC official site and under support search for upgrades and download the latest rom for your phone and flash it.
Good luck.
I tried to run Task29 but I got a bunch of errors. I think it is because Device Manager does not reconize my phone. Can I copy the RUU_signed.nbh file from the extracted .exe file to the sd card and run it from the boot loader? Does the file need to be renamed? Is there another file I can run from the sd card? Sorry for all the questions.
Thanks for the ideas.
Jack567 said:
I tried to run Task29 but I got a bunch of errors. I think it is because Device Manager does not reconize my phone. Can I copy the RUU_signed.nbh file from the extracted .exe file to the sd card and run it from the boot loader? Does the file need to be renamed? Is there another file I can run from the sd card? Sorry for all the questions.
Thanks for the ideas.
Click to expand...
Click to collapse
press volume down and power botton to go to the multi color screen then it sould pop usb if so:
Try this http://www.youtube.com/watch?v=nrmlqrfCvas
With the phone connected to the computer and power on with volume held down my bootolader reads:
RUUNBH
PB81120 HX-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Upgrade ROM code error
Please try again
USB
I formated my 16gb sd card, coppied and renamed file to sd card and rebooted. Phone display has white screen with 'Loading...' Goes no futher. Any other Ideas.
Thanks for your help.
Jack567 said:
With the phone connected to the computer and power on with volume held down my bootolader reads:
RUUNBH
PB81120 HX-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Upgrade ROM code error
Please try again
USB
I formated my 16gb sd card, coppied and renamed file to sd card and rebooted. Phone display has white screen with 'Loading...' Goes no futher. Any other Ideas.
Thanks for your help.
Click to expand...
Click to collapse
Are you sure you have the correct rom?
In case it doesn’t have Windows Mobile installed or you can’t get ActiveSync to recognize it, put it into bootloader mode: A.Power off your HTC HD2.
B.Press the Volume-Down button on your phone, keep it pressed and press the Power button.
C.Keep both the buttons pressed until you see the red, green, blue and white bootloader screen and then release both buttons.
2.Now connect your phone to your PC via USB. If this is the first time you’re connecting your phone to the PC in bootloader mode, wait for the drivers to be installed automatically. The term ‘Serial’ in the white area of the screen should now change to ‘USB’.
Jack567 said:
With the phone connected to the computer and power on with volume held down my bootolader reads:
RUUNBH
PB81120 HX-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Upgrade ROM code error
Please try again
USB
I formated my 16gb sd card, coppied and renamed file to sd card and rebooted. Phone display has white screen with 'Loading...' Goes no futher. Any other Ideas.
Thanks for your help.
Click to expand...
Click to collapse
huh, i fear it's bricked. Sorry..
I would like to thank both of you for your input. Yes, that is how I put it into the bootloader. I also think the phone is bricked. I have read where you can have your phone unbricked. What do you think about sending it to someone to have it done?
Thanks again for your comments.
Jack567 said:
I would like to thank both of you for your input. Yes, that is how I put it into the bootloader. I also think the phone is bricked. I have read where you can have your phone unbricked. What do you think about sending it to someone to have it done?
Thanks again for your comments.
Click to expand...
Click to collapse
anyway try this thread http://forum.xda-developers.com/showthread.php?t=614630
or this one http://forum.xda-developers.com/showthread.php?t=1247494
just a thought, have you tried putting HSPL4 on it? http://forum.xda-developers.com/showthread.php?t=611433&post#3
Thanks for thanking me Jack567, but did it work?
I found a local person that is going to try to get my phone running. If he can't I will try what you suggest. Hope I can be back soon. It's geeat to be learning new things. Technology is great and thanks to everyone that helps the noobee's like me. Hope I can help in the future. You can't learn if you don't make mistakes.
ITS NOT BRICKED I CAN BET ON THIS
Even I had the same problem ,I downloaded the official t-mobile update exe, but since I have been using HTC phones rite from Imate jam to kjam to jasjam to diamond to topaz till Leo so I found easily how to go back to 6.5 and also done for few local people, what I did is
1 Extract the tmobile update exe (see for the version which has ver. 3.03.0000 , u can find it on www.shippedroms.com or google it ) then using winrar extrect its content on your pc and rename the file RUU_Signed.nbh to leoimg.nbh
2 copied this file to my storage card and (fast use I keep a 2gb sd card and formatted &place the leoimg.nbh file to root of sd card so it looks like only 1file in storage card &no folders or anything)
3 turn off the device put the sd card & keep pressing volume down button and press power button to turn it on this will take u to 3 colored screen for a few second and then who loading on while screen if u have a proper matching leoimg on sd card then it will show u the contents i.e.
Radio v2
Splash
Bootloader
configdata
Os
And a few more things
now press the power button once and u can see the progress bar may be it mite restart ur phone but don't thing it screwed it will resume the update process & u will be back to ur stock rom
1 important point for u is that download the rom version 3.03 as it seems to me that u already have a stock spl and if u put un compatable rom then it won't move ahead from loading
Hope it helps u
I purchased an HD2 off eBay to replace one with a cracked screen. The seller had been running Android and had attempted to downgrade to Winmo 6.5 (no idea why) and now the phone is stuck in bootloader. I figured it was an easy fix to get it back to running Android from NAND, but so far I'm not having any luck.
The screen shows:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
It looks like MAGLDR isn't functioning as I can't install CWM (USB init failed error). When I plug in the phone the "USB" message shows up and I get the sound in Windows indicating a USB connection.
I've tried a number of different flashes but all complete much too fast and upon reboot I'm still in the bootloader.
Any ideas?
Install HSPL first.
Is HSPL not installed already? It says "SPL-2.08.HSPL" on the bootloader screen.
You don't flash cwm from that screen. You flash magldr and winmo roms and radios from that screen, then when you restart magldr should appear, assuming your radio is compatible. If not, flash radio 2.15.50 and if it still doesn't start you have problems. Don't touch the spl, you are correct, 2.08.hspl is fine.
First post was SPL-2.08.JSPL, I was thinking is something wrong with SPL.
I've attempted to install MAGLDR a few times and it completes in about 30 seconds instead of the 10 minutes indicated. After rebooting I'm still looking at the bootloader.
EDIT: Just to be clear, I want to get back to Android, not Winmo
Try to flash radio like Samuel said.
I flashed to radio 2.15.50.14, which appeared to work, and still stuck in bootloader.
I have the same radio and it works.
Clean Install MAGLDR:
1. Task 29
2. Flash Radio(2.15 Recommended)
3. MAGLDR 1.13
4. ClockworkMod Recovery
5. Flash rom
If you haven't success could be a hardware problem.
Reinstall winmo and if everything works retry an android fresh install.
This sequence appears to work up to the MAGLDR flash, which flicks straight from 0% to 100% completion. After reboot I'm in the tricolour bootloader screen (even if I hold down power button + down volume).
Just to check I'm flashing correctly, I've downloaded DFT_LEO_MAGLDR113_DAF and I unrar then run ROMUpdateUtility. Is this correct?
When the boatloader loads up, it flashes once as if trying to load something else (MAGLDR I assume) and the text at the top refreshes - don't know if this is relevant
I had a similar problem after my repair. Look into my topic to see if you have he same problem!
http://forum.xda-developers.com/showthread.php?p=20968290#post20968290
My post that will probably help you:
Roy KW said:
Stock rom is running agian.
This is what I did:
1. Put USB in Telephone.
2. Go to red/blue/green flash screen using Volume Down.
3. Flashed using official HTC Rom Updater on PC.
4. Restart Device.
I have however, been scammed.
Remember those 'touchscreen-lines' that run diagonal on your touchscreen if you watch very closely?
They are not present on my device.
This is fishy.
Review on google:
Wich is Dutch for:
Damn, really wished I've went to Vodafone. They are expensive, but at least they are honest.
Click to expand...
Click to collapse
Don't mind the scam-part. It's just part of my topic and problem.
d3ft said:
After reboot I'm in the tricolour bootloader screen (even if I hold down power button + down volume).
Click to expand...
Click to collapse
Nothing unusall there. Its the way you get into the bootloader. To get into magdlr: turn of your device then hold down POWER button (power button only) till magldr menu shows up.
Roy KW said:
I had a similar problem after my repair. Look into my topic to see if you have he same problem!
http://forum.xda-developers.com/showthread.php?p=20968290#post20968290
My post that will probably help you:
Don't mind the scam-part. It's just part of my topic and problem.
Click to expand...
Click to collapse
I'll give this a go. On boot, the phone enters the tricolour bootloader screen without me doing anything
greg17477 said:
Nothing unusall there. Its the way you get into the bootloader. To get into magdlr: turn of your device then hold down POWER button (power button only) till magldr menu shows up.
Click to expand...
Click to collapse
Tried doing this and still in bootloader!
d3ft said:
I'll give this a go. On boot, the phone enters the tricolour bootloader screen without me doing anything
Tried doing this and still in bootloader!
Click to expand...
Click to collapse
hmm that strange. seems like your volume down button is pressed or stuck constantly. did you try to clean its contacts?
greg17477 said:
hmm that strange. seems like your volume down button is pressed or stuck constantly. did you try to clean its contacts?
Click to expand...
Click to collapse
Ummm no? I wouldn't have the faintest idea how to do this
d3ft said:
Ummm no? I wouldn't have the faintest idea how to do this
Click to expand...
Click to collapse
i have never opened my hd2 that far, so i dont really know, sorry. I guess you will need a screwdriver but i would look for some tutorials on google on how to open it correctly/safely.
So the only way I should be seeing the tricolour bootloader screen is by holding the down volume button? And if I'm not it means it must be stuck?
I guess the only thing to do is pull it apart then!
d3ft said:
So the only way I should be seeing the tricolour bootloader screen is by holding the down volume button? And if I'm not it means it must be stuck?
I guess the only thing to do is pull it apart then!
Click to expand...
Click to collapse
yes, volume down to enter tricolor bootloader.
if its stuck? not sure 100%, but very very likely.
I have this same problem. Anyone find a fix for it? Or is it hardware?
Hi,
I want to instal WP7 on my HTC HD2.
In the tutorial i use i should use the Rom update utility to get MAGLDR on my phone.
When i try to use this utility i don't get further than 0% and after some time i get a error (error 626)
What i did is:
- I reseted my HTC HD2.
- I started the Rom update utility. It says that i need a update from 1.66.404.1 to 2.00.000.0.
- So when i start this it will restart my phone and show me a progres bar.
This will stay on 0% and after 10 minutes the utility gives me a message that says:
You connection is lost(error 626). Than i need to "recover" my phone by taking the battery out and put in in again.
When i do this it wel restart my phone with the WM6.5 so nothing happend.
I tryed the following things:
- A different usb cable and usb port.
- redownload the Rom Update Utility from this site.
- Hard reset my phone.
Nothing happend a still geth the same error.
Does someone know how to fix this?
Or is there a defferent way to install WP7 on my HTC HD2.
Thanks,
Maarten
read tutorial from my signature
I will try that thanks.
I finished step 0.5 and 1.
But when I am at the line "When phone boot in MAGLDR use:"
I get stuck.
The MAGLDR is installed but when the phone restart i get stuck on the white HTC screen.
Any clou what i should do next?
if not boot, press and hold power button to start magldr....
I tryed it but it wont do anything else than go to the white boot sreen with the Green HTC logo.
I tryed to press the power button for a long time and while he is booting.
Butt notting more than te boot screen shows.
The only way to start the phone again is to remove the battery.
I can get in the "red-green-blue-white screen"
I already tryed to reinstall the magldr. But no luck.
And what do you meen with "in not boot"?
The only thing it does do is boot to this logo and that's it. So its always booting when i turn it on...
"if not boot to magldr"
which HSPL you have installed on device?
try install WM6.5 first then install magldr....
first time when phone boot after magldr flashed, must boot to magldr automatically
I have HSPL2.08
It doesn't start the magldr automatically.
Even if i hold the power button. It just starting with a white boot screen with HTC logo.
Don't know how to install wm6.5 again.
Please help. I would like to use my phone tomorow again.
Edit:
Maybe it's bricked...
boot to threecolor screen and flash WM6.5
Ok I flash back to WM6.5
What to do now?
Follow the instructions again i asume.
Anyway many thanks for your help!!!
yes, after flash, install magldr and continue...
Ok I flashed my phone back to WM6.5
This is working again.
After that I installed the magldr but it doesn't load anything after that.
It says the flash went correct but when the phone reboots it goes to the white htc boot logo. And thats it.
Even if i start the phone with the power button on it doesn't go to the magldr.
Did i install the right one?
I installed the MAGLDR113_DAF
After that i tryed to flash the rom to WP7.5 but is says that the phone is not connected.
Don't know what to do anymore.
you cant flash WP7 without magldr menu (setting options and enable USB flasher in magldr)...
yes this magldr is ok...
http://forum.xda-developers.com/showthread.php?t=893618
to be sure, which version of HD2 you have?
also check data in bootloader screen (threecolor)
Data in bootloader screen:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Version:
I know i don't have the t-mobile version.
HTC HD2 T8585
MasterMaarten said:
Ok I flashed my phone back to WM6.5
This is working again.
After that I installed the magldr but it doesn't load anything after that.
It says the flash went correct but when the phone reboots it goes to the white htc boot logo. And thats it.
Even if i start the phone with the power button on it doesn't go to the magldr.
Did i install the right one?
I installed the MAGLDR113_DAF
After that i tryed to flash the rom to WP7.5 but is says that the phone is not connected.
Don't know what to do anymore.
Click to expand...
Click to collapse
did you perform the magdlr prep steps of clearing the mbr and uselast24nand from the services option of the main menu, then select option 5 (main menu) usb flash...then flash rom?
hjhjhj said:
did you perform the magdlr prep steps of clearing the mbr and uselast24nand from the services option of the main menu, then select option 5 (main menu) usb flash...then flash rom?
Click to expand...
Click to collapse
I used the manual from dxdy:
STEP 0.5 - from same beginning, WP7 never or not installed on phone
- If needed (if Android NAND installed, or if any error during flash
process, erase NAND with Task29). Flashing WM6.5 not needed.
- if you have SIM locked phone and want unlock with code, you can this only in WM6.5
- insert formatted microSD card to FAT32 in phone
- flash radio if you want (if flash version available) or use radio upgrade during ROM flashing (put radio file
part00.bin in data.zip file before ROM flash)
STEP 1. - when HSPL and/or MAGLDR not installed
- Flash HSPL 2.08 if needed (put device in bootloader before Flash:
press and hold Volume down + Power button)
- Flash MAGLDR 1.13 (put device in bootloader before Flash:
press and hold Volume down + Power button)
Click to expand...
Click to collapse
- I didn't erease the NAND with Task29 because i don't have android installed.
But after the last step it wont go in to the MAGLDR.
- I didn't Flash the Radio. Is this needed?
Where can i find the radio version that is installed? Or does it need to be a tweakt version from this forum?
MasterMaarten said:
I used the manual from dxdy:
- I didn't erease the NAND with Task29 because i don't have android installed.
But after the last step it wont go in to the MAGLDR.
- I didn't Flash the Radio. Is this needed?
Where can i find the radio version that is installed? Or does it need to be a tweakt version from this forum?
Click to expand...
Click to collapse
you should do task29 whether you have android or not....between flashes even if wp7. task29 cleans out the memory area where the OS will reside.
as for the radio...radio thread for the TMOUS radio is here:
http://forum.xda-developers.com/showthread.php?t=1111613
more than likely you shouldn't have to flash a radio, but it won't hurt. only have to do it once.
in order to use the rom flash utility...you have to go into magdlr main screen...scroll down to and select 10. Services, then select 5. CleanMBR, and then 4. Uselast24NAND. Finally, back at the main set of options select 5. USB Flash.
Then you kick off your DWI.exe in admin mode.