[Q] Updating Omnia 7 to Mango - Omnia 7 General

Hi,
I got a problem updating my Omnia 7.
It is a german T-Mobile branded with 16GB. At first I could not upgrade it, because I could not get into download mode (wrong boot-firmware). I got myself a Jig-Device and solved that. After that I was shown an update by Zune. So i updated to 7004 then to 7008 then to 73something, but after that updating to 7720 did not work. I got Errorcode 8000FFFF. Which told me that I might be forced to sync my data back to my mobiel (no problem, no data on it).
After that I formated the telefone to default settings but I was still not able to upgrade to Mango.
Then I debranded the phone using a firmware from the developer forum. After that I wasx back at 7004 and upgraded the phone again (I restarted the phone after each successfull flash). But still I was stuck with 8000FFFF.
Then I went back to german T-Mobile branding und tried a third time going to mango - still not working.
Problem is: A colleague of me went with her HD7 straigt to Mango, and even one of our directors did a successful update on his omnia 7 (and he is defenitly not a techie).
What am I doing wrong?
Is there a firmware available which updates me directly to Mango?
Is my phone faulty?
Regards and thank you for your help!

Related

[SFR] NoDo update error

Hi,
I've just updated my HTC Trophy 7 with the official SFR NoDo update, but after installation, I've got no network (No service) ! The phone does not recognize any sim card....
I was obliged to recover to 7.0.7008 to get my phone working again !
Anyone faced the same issue ?

[Q] MMS not working after updating to 7392

hello..im suffering from a very annoying problem.i installed the back to the future updatable rom.before the installation i removed the sd card and installed 7004 succesfully,after this i booted to wp7 and started testing it..all was working just fine and i was able to send MMS.i did a hardreset and continued installation..after installing 7392 and hardresseting i lost the ability to send MMS it just said :cant send..i even cant recieve any MMS message..i though that it would work after 7720 so i continued the procces.it didnt help.now im stuck with a mango rom that cant send/recieve MMS..any fix for this?.thanks.
p.s yes.i already tried to write the APNs...connection setup...and it didnt help.

Q regarding 8107

I'm rocking my focus, which hasn't been unlocked since mango 7720. I used chevron unlock to get nodo and played around with some tones in the registry. So the only changes I made to get nodo was change the registry carrier from ATT to blank. Had to use the Hungary and disconnect trick for nodo, but have gotten every update since. (cheated for mango too, but that, obviously was impatience)
So my question is, is it worth it to download this one, as I see a lot of people are having data and other issues with it...
Sent from my SGH-i917 using XDA Windows Phone 7 App
ATT Focus
I have no confidence in ATT so I upgraded first to 7740, then 8107 using the cab sender method. Everything works fine. Still Chevron WP7 token and interop unlocked, and all of my registry edits are intact. The upgrade went easily, was recognized by Zune, and the backup was also recognized. Hope this helps. No data issues or any other issues. Most issues people have using the cab sender method had to do with misunderstanding what language packs needed to be installed.
That's what I did. Changed ATT-US to Rog-CA, and upraded to 7740. Then changed back to ATT and used the CabSender method to get to 8107. All is working fine.

Updating Samsung Focus Flash i677 to Tango with Windowbreak!

I have followed the next steps to update my Focus Flash i677 to get Tango and preserve the Windowbreak state:
First that all my Focus Flash had the 7712 Mango version already installed and I used this easy tutorial to get Windowbreak:
http://windowsphonehacker.com/artic...ck_your_samsung_wp7_with_windowbreak-12-23-11
Remember that If you use the above method with higher versions of Mango or Tango this will not work.
Then I used a manual method via Cab Sender to get 8107 update, until here you still have the Windowbreak condition.
http://www.wpcentral.com/force-updating-your-windows-phone-os-build-8107-tutorial
Afther that I used the same method to update from 8107 until 8773 with the Cabs that you can found here in the second post:
http://forum.xda-developers.com/showthread.php?t=1306415
You must update to 8112 and then to 8773.
It´s recommended that you put your phone in to airplane mode and switch off the internet connection on your computer during the process, Cab Sender need an internet connection to start the process, but you can switch off that connection after the process start.
To remain the Windowbreak in Tango follow the next tutorial:
http://windowsphonehacker.com/artic...date_be_forewarned_possible_solution-06-28-12
It worked perfect to me with no issues until now!
Update:
I had some issues with an application then I dicided perform a hard reset to my phone, my surprise was that the Windowbreak had disappeared, then I tried to carry out the process again but now was not possible, because now Im in Tango 8773 and the diagnosis version is high 1109 and the method doesn´t work with that version, the only way to perform Windowbreak again it´s downgrading the OS and the only method that I found was with a Brazilian firmware: I677_OPEN_ZTOKL1_FIRMWARE_SAMSUNG that debrand your phone with no carrier logos and applications and let your device in mango 7720, but again it´s not possible use the Windowbreak method because the firmware version it´s KL1 and we need KK4 for that and there is not another firmware available that we can use, so my recommendation it´s to remain in Mango if you like Windowbreak.
The advantages with the brazilian firmaware it´s that you have call block options, 3g toogle, change the the 4G icon in bar nottification to 3g+, no carrier logos and apps and if you decided aupdate to Tango via Cab Sender again you can do it, but remember without possibilities of Windowbreak for now
thx
great, works for me...
samsung focus flash developer unlock
Reyk said:
I have followed the next steps to update my Focus Flash i677 to get Tango and preserve the Windowbreak state:
First that all my Focus Flash had the 7712 Mango version already installed and I used this easy tutorial to get Windowbreak:
http://windowsphonehacker.com/artic...ck_your_samsung_wp7_with_windowbreak-12-23-11
Remember that If you use the above method with higher versions of Mango or Tango this will not work.
Then I used a manual method via Cab Sender to get 8107 update, until here you still have the Windowbreak condition.
http://www.wpcentral.com/force-updating-your-windows-phone-os-build-8107-tutorial
Afther that I used the same method to update from 8107 until 8773 with the Cabs that you can found here in the second post:
http://forum.xda-developers.com/showthread.php?t=1306415
You must update to 8112 and then to 8773.
It´s recommended that you put your phone in to airplane mode and switch off the internet connection on your computer during the process, Cab Sender need an internet connection to start the process, but you can switch off that connection after the process start.
To remain the Windowbreak in Tango follow the next tutorial:
http://windowsphonehacker.com/artic...date_be_forewarned_possible_solution-06-28-12
It worked perfect to me with no issues until now!
Update:
I had some issues with an application then I dicided perform a hard reset to my phone, my surprise was that the Windowbreak had disappeared, then I tried to carry out the process again but now was not possible, because now Im in Tango 8773 and the diagnosis version is high 1109 and the method doesn´t work with that version, the only way to perform Windowbreak again it´s downgrading the OS and the only method that I found was with a Brazilian firmware: I677_OPEN_ZTOKL1_FIRMWARE_SAMSUNG that debrand your phone with no carrier logos and applications and let your device in mango 7720, but again it´s not possible use the Windowbreak method because the firmware version it´s KL1 and we need KK4 for that and there is not another firmware available that we can use, so my recommendation it´s to remain in Mango if you like Windowbreak.
The advantages with the brazilian firmaware it´s that you have call block options, 3g toogle, change the the 4G icon in bar nottification to 3g+, no carrier logos and apps and if you decided aupdate to Tango via Cab Sender again you can do it, but remember without possibilities of Windowbreak for now
Click to expand...
Click to collapse
I do all methods too developer unlock our samsung focus flash...then i update too window 7.8....by window phone hacker...soo what can i do for developer unlock...please repy
samsung focus flash developer unlock
Reyk said:
I have followed the next steps to update my Focus Flash i677 to get Tango and preserve the Windowbreak state:
First that all my Focus Flash had the 7712 Mango version already installed and I used this easy tutorial to get Windowbreak:
http://windowsphonehacker.com/artic...ck_your_samsung_wp7_with_windowbreak-12-23-11
Remember that If you use the above method with higher versions of Mango or Tango this will not work.
Then I used a manual method via Cab Sender to get 8107 update, until here you still have the Windowbreak condition.
http://www.wpcentral.com/force-updating-your-windows-phone-os-build-8107-tutorial
Afther that I used the same method to update from 8107 until 8773 with the Cabs that you can found here in the second post:
http://forum.xda-developers.com/showthread.php?t=1306415
You must update to 8112 and then to 8773.
It´s recommended that you put your phone in to airplane mode and switch off the internet connection on your computer during the process, Cab Sender need an internet connection to start the process, but you can switch off that connection after the process start.
To remain the Windowbreak in Tango follow the next tutorial:
http://windowsphonehacker.com/artic...date_be_forewarned_possible_solution-06-28-12
It worked perfect to me with no issues until now!
Update:
I had some issues with an application then I dicided perform a hard reset to my phone, my surprise was that the Windowbreak had disappeared, then I tried to carry out the process again but now was not possible, because now Im in Tango 8773 and the diagnosis version is high 1109 and the method doesn´t work with that version, the only way to perform Windowbreak again it´s downgrading the OS and the only method that I found was with a Brazilian firmware: I677_OPEN_ZTOKL1_FIRMWARE_SAMSUNG that debrand your phone with no carrier logos and applications and let your device in mango 7720, but again it´s not possible use the Windowbreak method because the firmware version it´s KL1 and we need KK4 for that and there is not another firmware available that we can use, so my recommendation it´s to remain in Mango if you like Windowbreak.
The advantages with the brazilian firmaware it´s that you have call block options, 3g toogle, change the the 4G icon in bar nottification to 3g+, no carrier logos and apps and if you decided aupdate to Tango via Cab Sender again you can do it, but remember without possibilities of Windowbreak for now
Click to expand...
Click to collapse
i have samsung focus flash and i do all method too developer unlock our device so tell me what xda do my my mobile and yet i update my mobile 7.5 to 7.8 by windows phone hacker......thats m details
Pda-i677CLE4
software-windows phone 7.8
OS version-7.10.8862.144
hardware revision-23.1.0.8
i update my phone to 7.8 by windows phone hacker......
my diagnosis version is 0412
please help me..
data issue
Reyk said:
I have followed the next steps to update my Focus Flash i677 to get Tango and preserve the Windowbreak state:
First that all my Focus Flash had the 7712 Mango version already installed and I used this easy tutorial to get Windowbreak:
http://windowsphonehacker.com/artic...ck_your_samsung_wp7_with_windowbreak-12-23-11
Remember that If you use the above method with higher versions of Mango or Tango this will not work.
Then I used a manual method via Cab Sender to get 8107 update, until here you still have the Windowbreak condition.
http://www.wpcentral.com/force-updating-your-windows-phone-os-build-8107-tutorial
Afther that I used the same method to update from 8107 until 8773 with the Cabs that you can found here in the second post:
http://forum.xda-developers.com/showthread.php?t=1306415
You must update to 8112 and then to 8773.
It´s recommended that you put your phone in to airplane mode and switch off the internet connection on your computer during the process, Cab Sender need an internet connection to start the process, but you can switch off that connection after the process start.
To remain the Windowbreak in Tango follow the next tutorial:
http://windowsphonehacker.com/artic...date_be_forewarned_possible_solution-06-28-12
It worked perfect to me with no issues until now!
Update:
I had some issues with an application then I dicided perform a hard reset to my phone, my surprise was that the Windowbreak had disappeared, then I tried to carry out the process again but now was not possible, because now Im in Tango 8773 and the diagnosis version is high 1109 and the method doesn´t work with that version, the only way to perform Windowbreak again it´s downgrading the OS and the only method that I found was with a Brazilian firmware: I677_OPEN_ZTOKL1_FIRMWARE_SAMSUNG that debrand your phone with no carrier logos and applications and let your device in mango 7720, but again it´s not possible use the Windowbreak method because the firmware version it´s KL1 and we need KK4 for that and there is not another firmware available that we can use, so my recommendation it´s to remain in Mango if you like Windowbreak.
The advantages with the brazilian firmaware it´s that you have call block options, 3g toogle, change the the 4G icon in bar nottification to 3g+, no carrier logos and apps and if you decided aupdate to Tango via Cab Sender again you can do it, but remember without possibilities of Windowbreak for now
Click to expand...
Click to collapse
I installed the Brazil firmware about a month ago had at&t firmware before for some reason I'm having data issues that I didn't have with the at&t firmware. I just lose data connection and only the 3g icon appears I have to restart data connection to get the 3g+. Anybody having this problem also do you know if the Radio software version and Radio hardware version is the same as the at&t firmware.
OS version 7.10.8862.144
Firmware revision number 22.09.12.07.1
Hardware revision number 23.1.0.8
Radio software version 2209.12.6.2
Radio hardware version 0.0.0.6
bootloader version 6.7.3.0
chip soc version 0.7.4.2.1
Thanks
so I noticed a very old thread but I found one of these phones recently and would like to try and put the unbranded Brazilian version just in my five year old son to play with over Wi-Fi. is this even still possible and where do you think I can get you for lunch from and also any special requirements The flash this?

8773 firmware doesn't allow certain menus to open

Hi All
I have an LG E900 WP7 phone (Orange UK) and have recently updated to firmware 8773, all went well and didn't get no errors but when i try to create a new txt message it goes to open then kicks me back to the main menu. (strange i know) this also happens when i try to go to Settings --> About and also when i try to use my Wifi
Has anyone come across this before ?
Cheers
Alistair
P.S does anyone have the firmware after 8773 ?
This happens to my phone now and then too. Restarting it does the trick for me.

Categories

Resources