Hi guys,
I got a new 10.1 yesterday as I had to return the old one due to the Newton rings issue. Anyhow I have rooted the new tab with the latest Overcome ROM and all that went fine. Now I want to transfer my Titanium backup to the tab so that I can restore all my stuff. The thing is Kies does not recognise the tab at all?? I have tried to uninstall it fully and re-install it again but still no joy :-( I'm on Windows 7.
The previous 10.1 that was also running Overcome v1.2.3 connected to Kies without any issues?? This one pops up a little message in the status bar saying "USB Connected\MTP Connected" and there is a USB icon there but that is all that happens?? I have also done a factory reset on the 10.1 in case that was it but Kies still does not pick it up :-(
Any ideas guys??
Cheers,
M
mark.m.moran said:
Hi guys,
I got a new 10.1 yesterday as I had to return the old one due to the Newton rings issue. Anyhow I have rooted the new tab with the latest Overcome ROM and all that went fine. Now I want to transfer my Titanium backup to the tab so that I can restore all my stuff. The thing is Kies does not recognise the tab at all?? I have tried to uninstall it fully and re-install it again but still no joy :-( I'm on Windows 7.
The previous 10.1 that was also running Overcome v1.2.3 connected to Kies without any issues?? This one pops up a little message in the status bar saying "USB Connected\MTP Connected" and there is a USB icon there but that is all that happens?? I have also done a factory reset on the 10.1 in case that was it but Kies still does not pick it up :-(
Any ideas guys??
Cheers,
M
Click to expand...
Click to collapse
Hi
Make sure the USB debugging is turn off
Settings > Applications > Development > USB debugging.
Rgds.
^ this. I run overcome and it works fine with Kies. You might also need to update Kies to a newer version if the above does not work.
sinbsd said:
^ this. I run overcome and it works fine with Kies. You might also need to update Kies to a newer version if the above does not work.
Click to expand...
Click to collapse
Hi guys,
I have tried both those things and on two different machines now and still no joy :-( I am starting to worry about this to be honest...... Could it be the cable? It charges fine and as I said MTP Initialisation comes up then MTP Connected in the status bar but that is as far as it goes?? Luckily I made a backup of the original ROM and have just restored it back but surprise surprise it will not connect either :-( It's the exact same as with Overcome or Bindroid?? Would I have damaged it somehow by rooting it??
I only want to transfer files, why does Windows not just show it as a removable drive? Is there any other program I can use?
Cheers,
M
After trying EVERYTHING to try and get this working and I mean EVERYTHING it still will not connect!! I have just called Samsung and they are to send me software called Kies Logger via e-mail that they claim will fix it.....I doubt it but await it eagerly!
Cheers,
M
Hi
Any chance that you could post that software?
Since i guess, we are alot of people who is experinencing, that we're not able to connect it to Kies
Thanks a million
-TB-
terrorblind said:
Hi
Any chance that you could post that software?
Since i guess, we are alot of people who is experinencing, that we're not able to connect it to Kies
Thanks a million
-TB-
Click to expand...
Click to collapse
I will post no probs or send in a PM when I actually get it....still waiting and when I called them half an hour ago to ask what was the delay he said it could take up to 24hours!! I was like that is ridiculous as it's only a piece of software! I asked him to make it high priority and he said it already was. Up to now I have not been impressed at all by Samsung's technical support!
Cheers,
M
Thanks buddy..
just for giggles i checked the SW version on the kies i use for my two galaxy phones (which should be the exact same for the tablet)But it has a different SW version then the one found on samsung site for the tablet... The Kies i have installes ends on -152 but the one on the officiel samsung kies site ends on -152_4...
terrorblind said:
Thanks buddy..
just for giggles i checked the SW version on the kies i use for my two galaxy phones (which should be the exact same for the tablet)But it has a different SW version then the one found on samsung site for the tablet... The Kies i have installes ends on -152 but the one on the officiel samsung kies site ends on -152_4...
Click to expand...
Click to collapse
I noticed that exact same thing as well man! The one I have installed here on my machine is _152 (see attached).
Cheers,
M
hi mark.m.moran
Did they send you the program
Cheers
-TB-
terrorblind said:
hi mark.m.moran
Did they send you the program
Cheers
-TB-
Click to expand...
Click to collapse
Hi mate,
Samsung still have not sent it too me :-( I rang yesterday to get the call escalated as there are totally messing me around. A friend of mine thinks it's a hardware issue and I think he is right!
Cheers,
M
I rang Samsung last Friday...
they had no idea about the issue, nor the program.. The young lad i got hold of, literally troubleshooted his heart out! i just kept saying "tried it already"
I'm not sure its a hardware issue.. since my Win7 finds the device instantly... and so did my old Kies.. this happened after my update..
Cheers...
-TB-
you should try this
http://www.simplehelp.net/2011/07/05/how-to-transfer-files-from-your-mac-to-your-android-tablet/
Much easier, just as fast, free, and more reliable than kies. why waste your time?
Thats true.. but your not able to update this way.. You kinda need kies for that. If you dont use Odin and so on
-TB-
saltychino said:
http://www.simplehelp.net/2011/07/05/how-to-transfer-files-from-your-mac-to-your-android-tablet/
Much easier, just as fast, free, and more reliable than kies. why waste your time?
Click to expand...
Click to collapse
But that ^ only works for a Mac and I am using a Windows machine mate??
Apart from that it should work as specified and if it's faulty which it looks like it is I want it fixed or either get a new one. I'm calling Samsung again this morning if I don't hear from them before 12! So far they have to be THE WORST to deal with on the customer service side of things!!
Cheers,
M
terrorblind said:
I rang Samsung last Friday...
they had no idea about the issue, nor the program.. The young lad i got hold of, literally troubleshooted his heart out! i just kept saying "tried it already"
I'm not sure its a hardware issue.. since my Win7 finds the device instantly... and so did my old Kies.. this happened after my update..
Cheers...
-TB-
Click to expand...
Click to collapse
Can you link the old version on Kies you are using mate?
mark.m.moran said:
Can you link the old version on Kies you are using mate?
Click to expand...
Click to collapse
I would really like to buddy.. But i dont have an older version, then the current one from Samsung.. I tried to google for an older version, but without any luck..
I guess the only thing we can do is to wait for a new Kies update.. I did ask the helpdesk when we could expect an update.. And the answer was of course "no"
-TB-
terrorblind said:
I would really like to buddy.. But i dont have an older version, then the current one from Samsung.. I tried to google for an older version, but without any luck..
I guess the only thing we can do is to wait for a new Kies update.. I did ask the helpdesk when we could expect an update.. And the answer was of course "no"
-TB-
Click to expand...
Click to collapse
Waiting for a Kies update is not good enough for me mate. Mine NEVER connected to my computer from the day I got it. I'm 99.9% sure a new version of Kies will not make any difference, it still will not connect. I will not be happy until this is fixed by Samsung!
I have been promised a call back by a manager over an hour ago and get the feeling that will not happen either. At this stage it seems like the small claims court may be the only way to get this resolved.
Cheers,
M
mark.m.moran said:
But that ^ only works for a Mac and I am using a Windows machine mate??
Apart from that it should work as specified and if it's faulty which it looks like it is I want it fixed or either get a new one. I'm calling Samsung again this morning if I don't hear from them before 12! So far they have to be THE WORST to deal with on the customer service side of things!!
Cheers,
M
Click to expand...
Click to collapse
doesn't just work with mac, you can use any ftp client to connect to file expert on your tab mate!
saltychino said:
doesn't just work with mac, you can use any ftp client to connect to file expert on your tab mate!
Click to expand...
Click to collapse
Great! Well Samsung FINALLY booked my Tab for it to be sent in for repair! Let's hope they can figure out what is wrong with it.
I flashed a stock image using Odin back onto it before sending back, will they be able to tell it was rooted? I noticed a flash counter on the Odin screen so wonder will that now be +1?? I checked and Clockworkmod Recovery was gone, all that was there was the stock recovery.....
Cheers,
M
Related
Carlos said:
I am a US T-Mobile user. I have an install doc at http://www.mywirelessoffice.com/xda/romupdate.doc
I've also mirrored the file at:
http://www.mywirelessoffice.com/xda/XDA-developers-SER-v11.exe
Click to expand...
Click to collapse
I am a T-Mobile user in the USA and I loaded the new firmware today, and it loaded flawlessly. I could dial, I could surf the 'net, etc. However, after several "weird" lockups, especially during sync, I was forced to go back to my regular firmware. Have any other T-Mobile USA users experienced lockups? I am anxious to try the firmware again, because I really liked the features while it was running -- but I'm going to wait until other T-Mobile USA users have ironed out all the bugs, especially in conjunction with ActiveSync. (Version 3.7, btw.)
I haven't heard of this. My device is more reliable than ever on this version of the ROM, and others using it have told me the same thing.
Danborg said:
Have any other T-Mobile USA users experienced lockups? I am anxious to try the firmware again, because I really liked the features while it was running -- but I'm going to wait until other T-Mobile USA users have ironed out all the bugs, especially in conjunction with ActiveSync. (Version 3.7, btw.)
Click to expand...
Click to collapse
Yeap the same thing happened to me the first time I installed it but it worked much better after the second install. So try reinstalling it!
Carlos said:
I haven't heard of this. My device is more reliable than ever on this version of the ROM, and others using it have told me the same thing.
Click to expand...
Click to collapse
Everything works great, until I try to use ActiveSync. After sync'ing it locks up everytime. Only a battery reset will do. I've tried both ActiveSync 3.5 and 3.7, no difference. Any ideas?!
So it locks when you pull it from the cradle? And what do you mean by a battery reset?
Very odd. It started this right after you upgraded the ROM?
Danborg said:
Everything works great, until I try to use ActiveSync.
Click to expand...
Click to collapse
Ah, I have a gut feeling here. Do you use ActiveSync via a serial cable or serial cradle?
Danborg said:
Everything works great, until I try to use ActiveSync. After sync'ing it locks up everytime. Only a battery reset will do. I've tried both ActiveSync 3.5 and 3.7, no difference. Any ideas?!
Click to expand...
Click to collapse
Problem solved! This was an ActiveSync problem, and not a SE ROM problem! I discovered this by flashing my XDA back to the old ROM, that I had wisely saved on SD before embarking on this journey, and it locked up in ActiveSync also! I realized I haven't done a full sync with my XDA in a very long time, and I had 800+ contacts that seemed to be "choking" the XDA when I dumped it all at once. I deleted several hundred old contacts that I didn't need anymore (from old company), and then incrementally synced them to the XDA and it worked fine. I'm now happily back on the SE ROM and it is working beautifully.
Ah, I didn't think it could be the ROM.
Yesterday I learned a new lesson at a client's office... AS can lock up if a not-so-bright user has put mail items inside the contacts folder. :roll:
Tried USB tethering for the first time today and I was pleased with how quickly it set up and worked.
Now, I have HTC sync installed as this is my main PC, but does anyone know the set of driver files needed for Windows to pick up the Hero as a modem?
I'd like to pop them on the SD card to allow me to enable internet access on anyone's PC or laptop without installing full HTC sync.
If you've a default set up, the NDIS drivers can be found in c:\Program Files\HTC\HTC Driver\Driver Files.
Regards,
Dave
Thanks but it only has the drivers there for Vista x64 (my OS), I really need drivers for XP and Vista x86 too
Odd - when I installed it here on W7 x86, I get both 32-bit and 64-bit driver directories. If you can, I suggest you install on a 32-bit installation to get the driver files.
Regards.
Dave
Hello everyone,
This is one of my first post/reply here, so before anything thank you very much to all here for sharing such good infos.
I've tried to setup my Hero for use as USB Modem as well, but can not find the "HTC Remote NDIS Network Adapter" driver either. Reading on different forums it seems it used to be on the memory card shipped with the device, but I bought mine 4 days ago and the file isn't there now. HTC has probably changed policy regarding this. Can anyone point me to where I could download this file to install on my lapto using Vista.
Thank you very much.
You can download HTC sync direct from HTC's website. It contains all the necessary software and drivers, and is a later version than the one that shipped with the Hero (at least when mine was shipped anyway!).
Regards,
Dave
u got it to work with the default program in htc sync??? i thought it doesnt work..i tried and i got an error
Works fine for me.
Regards,
Dave
do u happen to have sprint service? im getting a username/password issue...i know its not the wrong info because i can get online fine without tethering..... im reading at many other places that sprint doesnt have it working yet??
No, mine is not a Sprint Hero. It is possible that Sprint have disable this option.
You might want to try PDAnet to see if that works with a Sprint Hero (see http://www.junefabrics.com/android/index.php )
Regards,
Dave
thanks dave..yea pdanet does work, i havnt yet tried it because its a trial version and u have to pay for it...i came from windows mobile where tethering was super easy to do and the apps were plentiful.... but it seems the android market doesnt have tethering ..... i rely on tethering alot for when im traveling, i thougth the android market wouldnt be a problem with tethering apps..but it seems im wrong
The GSM Hero support tethering out of the box - therefore the issue is not Android, but more likely a restriction your carrier has imposed!
First things first though - check to see if you have "Mobile Network Sharing" in Menu->Settings->Wireless Controls.
Regards,
Dave
yes, i have the mobile network sharing... i even install the drivers for tethering fine... im getting a error 67 saying that my usrname and password for my internet is not valid.... although i can go on my internet normally via my phone only...i cannot connect a usb to it from my laptop.... right after i connect it, the internet disconnects from the phone then i get an error.... you are right about sprint blocking it.... but theyve been blocking it since windows mobile...people got around it with a simple app which came with all the hacked roms.... it seems like an issue here with the sprint android.... but maybe its still new?
lawsofpower48 said:
you are right about sprint blocking it.... but theyve been blocking it since windows mobile...people got around it with a simple app which came with all the hacked roms.... it seems like an issue here with the sprint android.... but maybe its still new?
Click to expand...
Click to collapse
Yes it is still very new. As with WinMo, you need a hacked ROM, but these aren't available yet for the Sprint Hero as it's only just been released. Once you've got a rooted ROM on your device, you should be able to use wireless wifi tether - the meantime, PDAnet is probably your best bet.
Regards,
Dave
foxmeister said:
Yes it is still very new. As with WinMo, you need a hacked ROM, but these aren't available yet for the Sprint Hero as it's only just been released. Once you've got a rooted ROM on your device, you should be able to use wireless wifi tether - the meantime, PDAnet is probably your best bet.
Regards,
Dave
Click to expand...
Click to collapse
yea hopefully it will be soon they come out with the roms.... need the tethering pretty bad ! i can wait and do without pdanet. lol. thanks alot !
oem.inf
I would like to share my solution. I modified the oem.inf file in the oem.zip(attached) ,by changing the manufacturer name and device id as given in the PC 's device manager(unknown device).
It should work for xp,seven,vista.
Hi guys...i ve installed many apps in my phone , but many problems...sometimes it crushes while it opens, or freeze picture.. also i ve installed more shortcuts in htc sense , and now i cant remove them ????
also i got messages never delivering to sender...
i wonder where my 650 euros went...
is there any solution ? any new ROM ? ? maybe
ALSO i cant connect the phone to my PC ( using windows 7 32bit ) and mobile center doesnt recognize it, it Reports ERROR.
polaxgr said:
Hi guys...i ve installed many apps in my phone
Click to expand...
Click to collapse
In that case, any one (or combination) of the apps you've installed could be causing the problems. There are some known issues on here - have you searched for your problems in the forums - not just this one?
You may well need to do a hard reset and install the apps gradually, making sure that your problems have not re-occured. This way, you may be able to identify what is causing your problems.
johncmolyneux said:
In that case, any one (or combination) of the apps you've installed could be causing the problems. There are some known issues on here - have you searched for your problems in the forums - not just this one?
You may well need to do a hard reset and install the apps gradually, making sure that your problems have not re-occured. This way, you may be able to identify what is causing your problems.
Click to expand...
Click to collapse
thnx a lot...any clues about the issues i got with connectivity with my pc ?
polaxgr said:
thnx a lot...any clues about the issues i got with connectivity with my pc ?
Click to expand...
Click to collapse
I'm still on XP, so I use ActiveSync and that works (usually) with no problem. I know there have been others on here that use Vista or Windows 7, and they've got it working. Maybe one of those guys will offer some assistance.
Good luck mate
polaxgr said:
thnx a lot...any clues about the issues i got with connectivity with my pc ?
Click to expand...
Click to collapse
Hey! Yesterday I had the same issue. I am a new user too. When you connect your Leo to Pc, tap the autosync option on your mobile screen, not the usb/flash drive. Pc will recognize your phone then. Also, see if you have microsoft outlook instaled on your pc, that matters too.
BariĊĦa said:
Hey! Yesterday I had the same issue. I am a new user too. When you connect your Leo to Pc, tap the autosync option on your mobile screen, not the usb/flash drive. Pc will recognize your phone then. Also, see if you have microsoft outlook instaled on your pc, that matters too.
Click to expand...
Click to collapse
i do that , doesnt work
My N1 was working flawlessly adb and all, but I cant seem to get the NS to show up in adb.
Anyone have any luck or even try? Any Ideas?
Same problem with xp. I might take this phone back, what kind of phone has trouble connecting to usb. this sucks
mjgmjg said:
Same problem with xp. I might take this phone back, what kind of phone has trouble connecting to usb. this sucks
Click to expand...
Click to collapse
I fixed the issue, i forgot to update the driver package to REV4
mjgmjg said:
Same problem with xp. I might take this phone back, what kind of phone has trouble connecting to usb. this sucks
Click to expand...
Click to collapse
It's ridiculous isn't it. A new, top end, boundary pushing, first of its kind device requiring USB drivers! Take it back right away!
(We have a 'Thanks' button. How about an 'Idiot' button?)
slowz3r said:
My N1 was working flawlessly adb and all, but I cant seem to get the NS to show up in adb.
Anyone have any luck or even try? Any Ideas?
Click to expand...
Click to collapse
i'm using the stock Android SDK 2.3 drivers
links and details here http://forum.xda-developers.com/showthread.php?t=895545
Ifigured out what was wrong, a while ago lol but for the people that have issues there you go
Just hooked up my rtm version of mango dvp to my computer and checked for update and it says there is a dell update!
updating now.
Plz tell us how it goes... I have RTM ver as well..do I need to roll back to NoDO before the Mango update???
Sent from my Venue Pro using XDA Windows Phone 7 App
got an update yesterday from dell...was running the rtm version of mango...its working fine...and also read a tweet from microsoft saying that no need to revert to nodo for the update.....you wil still get the update...
Hey nutnithin, I'm planning to buy a Dell Venue Pro in India (possibly from Flipkart). After getting one, what are the steps I should take to upgrade to Mango?
What can this error code C101007c be, when I am updating my DVP to 7720?
I found I cannot boot it up when the update is finished, what can it be?
Can anyone tell me what are the update contents? (7403, 7720 and firmware update?)
henry084 said:
What can this error code C101007c be, when I am updating my DVP to 7720?
I found I cannot boot it up when the update is finished, what can it be?
Can anyone tell me what are the update contents? (7403, 7720 and firmware update?)
Click to expand...
Click to collapse
According to the Microsoft troubleshooting document:
"C1010007 Make sure that you are using the USB cable which was included with your phone.
Try to reconnect your phone to another USB port on your computer. Do not use a USB hub or ports on the front of your computer."
http://support.microsoft.com/kb/2484484
Update contains OS update (mango) and firmware update (219).
The latest Zune software said I had an update yesterday. I let it remove the RTM version of 7720, install the "latest", and I hoped I finally had the Dell version on my unlocked, but AT&T version of the DVP.
But when I look under wireless networks, I still can't connect to hidden SSID networks. The option simply isn't there. Does anyone have that functionality after their update?
I should mention that when I ran the update, my sim was still in my Motorola Atrix. I did the update connected to my wireless network on the phone, and with the USB cord attached to my primary PC... an ASUS G73 laptop.
I updated late last night, but finding out this morning that I have no audio. I cannot listen to music, hear ring tones etc. Audio IS turned on. Could this have been a bad update? Should I reset and try again? I fell asleep last night while it was updating so something could have happened during that time.
kr33mo said:
I updated late last night, but finding out this morning that I have no audio.
Click to expand...
Click to collapse
Try plugging in some earphones. Check if you can hear anything. Then unplug the earphones and try again through the speaker.
magicsquid said:
According to the Microsoft troubleshooting document:
"C1010007 Make sure that you are using the USB cable which was included with your phone.
Try to reconnect your phone to another USB port on your computer. Do not use a USB hub or ports on the front of your computer."
http://support.microsoft.com/kb/2484484
Update contains OS update (mango) and firmware update (219).
Click to expand...
Click to collapse
I also thought of having a faulty cable. The phone turned off by itself when I touched it.
However I remembered that I have flashed the firmware 2.0 on the touch panel some time ago, that may cause the problem. After that I rolled back the update and flashed back the firmware to 1.6, the update was then successful.
Anyway, many thanks.
---------- Post added at 04:46 PM ---------- Previous post was at 04:43 PM ----------
merkman said:
The latest Zune software said I had an update yesterday. I let it remove the RTM version of 7720, install the "latest", and I hoped I finally had the Dell version on my unlocked, but AT&T version of the DVP.
But when I look under wireless networks, I still can't connect to hidden SSID networks. The option simply isn't there. Does anyone have that functionality after their update?
I should mention that when I ran the update, my sim was still in my Motorola Atrix. I did the update connected to my wireless network on the phone, and with the USB cord attached to my primary PC... an ASUS G73 laptop.
Click to expand...
Click to collapse
Same as yours, I have an unbranded EU one.
I think it does not depend on which computer you have connected to during the update.
Just updated mine, says software version 7.10 (7720)
tejazz said:
Hey nutnithin, I'm planning to buy a Dell Venue Pro in India (possibly from Flipkart). After getting one, what are the steps I should take to upgrade to Mango?
Click to expand...
Click to collapse
1.install zune software from zune.net
2.plug in your phone to your pc/laptop
3.if you dont get a notification goto settings and click the section phone under which there is an update option..click that and it l search for the update..you l get a notification.run the update.
4.keep on checking for updates and installing them till you reach the version 7720
5.njoy mango...
btw how much are you gettting it for???you could rather goto a dell centre(if you are in india) and buy it...last i heard prices were around 24k...
Anyways njoy
magicsquid said:
Try plugging in some earphones. Check if you can hear anything. Then unplug the earphones and try again through the speaker.
Click to expand...
Click to collapse
Strangely, I got intermittent sound without doing anything. Then it went away again. I pulled the battery and restarted and I can hear the audio. I will continue to monitor.
kr33mo said:
Strangely, I got intermittent sound without doing anything. Then it went away again. I pulled the battery and restarted and I can hear the audio. I will continue to monitor.
Click to expand...
Click to collapse
must be the speakers...i had the same problem with my previous dvp...just press the bottom right of the screen and tap it.....mine worked as well as for lots of others....
kr33mo said:
I updated late last night, but finding out this morning that I have no audio. I cannot listen to music, hear ring tones etc. Audio IS turned on. Could this have been a bad update? Should I reset and try again? I fell asleep last night while it was updating so something could have happened during that time.
Click to expand...
Click to collapse
put on a song to play... and gentle flick the back of the phone where it says Windows Phone... the sound should start playing again....
i had a defective phone do that every once in awhile till i had it replaced... maybe your usb moved a bit and caused a short to stop the music from playing.
i can't connect wifi. when i press back button in setting/wifi/ wifi will always off. when my dell venue pro in nodo i don't have anyerror like this. anybody like me ?
nutnithin said:
1.install zune software from zune.net
2.plug in your phone to your pc/laptop
3.if you dont get a notification goto settings and click the section phone under which there is an update option..click that and it l search for the update..you l get a notification.run the update.
4.keep on checking for updates and installing them till you reach the version 7720
5.njoy mango...
btw how much are you gettting it for???you could rather goto a dell centre(if you are in india) and buy it...last i heard prices were around 24k...
Anyways njoy
Click to expand...
Click to collapse
Thanks a lot, mate. I'm planning to get it at Mobi Mart in Hyderabad where it's going for 24.5k.
Force mango on AT&T ?
Anyone know if u can use the disconnect wifi trick to force mango update in AT&T?
asdffgjh said:
Anyone know if u can use the disconnect wifi trick to force mango update in AT&T?
Click to expand...
Click to collapse
nope. the wait continues..
Krad said:
put on a song to play... and gentle flick the back of the phone where it says Windows Phone... the sound should start playing again....
i had a defective phone do that every once in awhile till i had it replaced... maybe your usb moved a bit and caused a short to stop the music from playing.
Click to expand...
Click to collapse
I tried that but nada. When I do plug in my headphones I hear the audio playing. It must be the speaker. Anything I could do short of sending for a replacement?