Database Users

[Q] Wildfire with Wildpuzzel Rom 2.2 every Kernel don't work

Hay people,
I have installed Wildpuzzel 2.2 Rom on my Wildifire and want to overclock my Wildfire. I installed all of the Kernels here and no kernel is running. Everytime if I installed a Kernel ist starts and When my Wildfire is an the Screen Android with de green figure he starts again and again.
Sorry for my bad English i hope you understand what i mean
Can anybody help me and give me a Kernel that Works ?
Thanks to any who helps me

This should be in Q&A, not the development board, for future reference.
Now, is the wildpuzzle rom a sense Rom or asop?
EDIT: oops, didn't realize there wasn't a q&a board. My bad.
-----
Sent from my CDMA Hero. I got some hot Froyo-on-Hero action here!

It's a Sense Rom

They have an oc kernel in the Rom dev thread. You wiped dalvik before you flashed it, right? Also, how long are you waiting when you reboot?
-----
Sent from my CDMA Hero. I got some hot Froyo-on-Hero action here!

I have wait about 20 min. I check to wipe dalvik before flash the kernel
Thanks

I have checked and it dosen't work. Can anybody else help me ?
Sent from my HTC Wildfire using XDA App

DjChapi said:
I have checked and it dosen't work. Can anybody else help me ?
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Hi! I had the same problem and finally I got working kernels. Wait some minutes and I'll post the link to XDA thread!

antonio1475 said:
Hi! I had the same problem and finally I got working kernels. Wait some minutes and I'll post the link to XDA thread!
Click to expand...
Click to collapse
But if you installed the Wildpuzzlerom, it's already overclocked! You need to install SetCPU and Superuser to give permissions and the second time you start the SetCPU app (the first time you have to go back to close SetCPU and reopen it), you'll be able to set higher frequency!
Reflash the Wildpuzzlerom and install SetCPU.
If it's not overclocked, I'll send you the link to XDA thread because I can't post links here...

antonio1475 said:
But if you installed the Wildpuzzlerom, it's already overclocked! You need to install SetCPU and Superuser to give permissions and the second time you start the SetCPU app (the first time you have to go back to close SetCPU and reopen it), you'll be able to set higher frequency!
Reflash the Wildpuzzlerom and install SetCPU.
If it's not overclocked, I'll send you the link to XDA thread because I can't post links here...
Click to expand...
Click to collapse
I done this and it's not overclocked. I have to flash the original Kernel because it's freeze after flash the rom.
Please send me the link and i check this out.

DjChapi said:
I done this and it's not overclocked. I have to flash the original Kernel because it's freeze after flash the rom.
Please send me the link and i check this out.
Click to expand...
Click to collapse
This one worked for me:
http://rom.tat.tw/wildfire/wildpuzzlerom/rom/v8/0055_oc_kernel_2.6.32_v8.zip

Sry but this kernel doesn't work too. I don't know why. But thx for your help.
Sent from my HTC Wildfire using XDA App

DjChapi said:
Sry but this kernel doesn't work too. I don't know why. But thx for your help.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
In a few hours I will send you a great working kernel

antonio1475 said:
In a few hours I will send you a great working kernel
Click to expand...
Click to collapse
This one is working for me right now:
http://forum.xda-developers.com/attachment.php?attachmentid=429951&d=1288436771
As ALL Overclocked kernels I've tried, it can freeze/hang the phone. But at least, this one reboots the phone (not pulling the battery) and in 20 second the phone is booted again (like hot reboot), so not a big deal.
I think the problem MAY be SetCPU app.

Problem on floyo 015 custom roms....

I had try to custom floyo roms on my phone and its succes..,but why its so many bug and error.,for the sample, radio fm its dissapear.,camera cannt work,some application with force close sometime,flash player can instal but cant use and force close when me plug in its,n64oid cant instal,and its be reboot it self..,so many bugs..,its nice rom but to many bugs..,any one know what the best custom roms and where i can get it?..thank yours so much for give me a suggestion..
Sent from my X8 using XDA App

before you install custom rom,you should read what works and not working..and x8 cant use flash player...maybe you can try minicm rc2...the only thing that does work on it is compass..

try to factory reset / full wipe
for me,its really stable,only a few bugs,likes 'sdcard safe removed' issue after heavy-usage phone
sorry for bad english....

anmiman said:
before you install custom rom,you should read what works and not working..and x8 cant use flash player...maybe you can try minicm rc2...the only thing that does work on it is compass..
Click to expand...
Click to collapse
Are you sure only compas?..
Sent from my X8 using XDA App

andrasandhi said:
try to factory reset / full wipe
for me,its really stable,only a few bugs,likes 'sdcard safe removed' issue after heavy-usage phone
sorry for bad english....
Click to expand...
Click to collapse
Are its make me loss my application if i do full wipe?
Sent from my X8 using XDA App

sukartochen said:
Are you sure only compas?..
Sent from my X8 using XDA App
Click to expand...
Click to collapse
i think soo

Try miniCM. It's the most stable rom, atm. Compass dont work, but everything else does.
Issuse with sd card safe to remove is on all custom xperia series rom, due to custom kernel is not finshed yet, bootloader not cracked yet.
Sent from my X8 using Tapatalk

sukartochen said:
Are its make me loss my application if i do full wipe?
Sent from my X8 using XDA App
Click to expand...
Click to collapse
yes
after u pushing a custom rom,try to 'factory reset' via xrecovery,it makes ur phone 'fresh'.
regards

sorry,double post...

y not u try 2.3.3 gingerbread?much more better and almost everything done.

sukartochen said:
I had try to custom floyo roms on my phone and its succes..,but why its so many bug and error.,for the sample, radio fm its dissapear.,camera cannt work,some application with force close sometime,flash player can instal but cant use and force close when me plug in its,n64oid cant instal,and its be reboot it self..,so many bugs..,its nice rom but to many bugs..,any one know what the best custom roms and where i can get it?..thank yours so much for give me a suggestion..
Sent from my X8 using XDA App
Click to expand...
Click to collapse
some of the things you mentioned aren't actually bugs, it's just we can't get flash and n64oid working on our devies, ony any roms, because the armv7 cpu is needed, these apps don't support armv6 devices. btw, you can install n64oid on 2.3 roms, however the app gets FC after loading a rom.

Dare-Devil Inside said:
Try miniCM. It's the most stable rom, atm. Compass dont work, but everything else does.
Issuse with sd card safe to remove is on all custom xperia series rom, due to custom kernel is not finshed yet, bootloader not cracked yet.
Click to expand...
Click to collapse
MiniCM is the best right now but dont jump to RC2 yet . there are a lot of other roms developed using minicm base like the nexus rom which have been uploaded by the devs . spend some time reading through the development forum to get the idea.
They all have the standard bugs tho. Elelinux is supposed to best in terms of random bugs but minicm has everything working including camera and hd video recording.
P.S - gingerbread roms are also really good but there are some sacrifices to be made there .

Plzzzz. Help facing a lot of problem

Hi ! Everyone i'm facing problems in the performance of my sg3
My phone takes 3 or 3 and half hour to get charge , in quadrant i get only 440 , it takes 4 min to boot up its laggy i'm on kyrillos v8.1 g3mod oc-b2
If someone knows the solution plzzzzzzzz......... Help
Sent from my GT-I5800 using XDA Premium App

1.Reflash the ROM (do chalk the sd-card folder paste etc),
2.update again just after flashing v8.0
3.Install setCPU, set governor scaling to conservative.
4.Enjoy your smooth & fast phone.
5.Never post new thread again if there's already a dedicated thread for it, you
should have asked in the official kyrillos feedback thread.
6.Thanks if I've helped you
Sent from my GT-I5800 using Tapatalk

thanks !!!!!!! and sorry for the new thread

You can hit the "thanks button" if you want
Sent from my GT-I5800 using Tapatalk

@sohail77, you can disable swap if its enabled

what does swap do

sohail77 said:
what does swap do
Click to expand...
Click to collapse
Swap acts like an additional RAM but incase you create a swap partition, then the extra RAM Space is on your sdcard.
Swap is not really needed. It takes about 4 hrs for my G3 to get completely charged. I guess that is normal.
Reflash you ROM and do the steps as said above. I would suggest using 83-1000 profile and using the "on demand" governor.
Follow the steps on using hybrid a2sd on kyrillos thread. It works fine for me.

[Q] Problem with Launcher Pro on Xperia X8

Hello!!
I'm a new user of Android and a couple of months ago I bought the Sony Ericsson Xperia X8.
THE CONTEXT:
I tried to upgrade my phone, rooting it and installing Android 2.3.7 (GingerXperiaV12) following a guide I found in youtube
After doing those steps yesterday, it worked fine.
I put to charge the battery all night, and this morning when I start the phone there was a message error telling about an error in Launcher Pro. I ignore it, and press continue so I don't remember very well what it said exactly (but it wasn't a long text, it pretty much said only that). Well, since the phone worked I didn't pay attention so I used WIFI and tried to install some apps like Skype, Barcode Reader or some Japanese Keyboard Input (like: google japanese input). The problem came when I tried to reboot the phone.
THE PROBLEM:
After pressing the center bottom and selecting "restart", the phone completly freezes when the text "Sony Ericsson" come out in the black screen. I can't access to the OS at all.
WHAT I HAVE TRIED TO SOLVE THE PROBLEM:
I tried waiting several minutes and extract the battery to reboot and try again, but it still freezes when the "Sony Ericsson" come out.
I tried accesing to the xRecovery (which I installed in order to root the phone), pressing several times back botton, but it doesn't work either.
Please can someone give me a help with this? I have read somewhere I might try installing the launcher again. Do you think that is the solution? Is it possible?
Thanks for advance

hello my friend .. i dont know about ur problem but for me launcher pro really sux and i didnt like it at all .. if u want a good launcher then download (Go launcher EX) from market .. and yeah also if u want good roms , i mean the best for x8 u have to use GingerDX or nAa minicm7 2.1.7 , u will find these roms in the dev. section . if u want my opinion about them i prefer nAa cause it is very smooth and perfect dual touch here the link .
http://forum.xda-developers.com/showthread.php?p=19691591
just follow the steps and read everythink and do it at ur own risk . welcome to the x8 forum and have a nice day .
Sent from my E15i using xda premium .
Using nAa kernel / miniCM7 2.1.6

Hello Acudor.
Thanks for the reply and for the recommendation.
Unfortunately until I don't solve this problem, my cellphone won't work to try that.

ok from what i understood from ur post is that u cant even access recovery and cant access the phone either right ? .. well that means the phone is bricked , and dont worry it happened to me 2 times before , well u can rescue ur phone , just go to this
http://forum.xda-developers.com/showthread.php?p=12442257
follow the steps and ur phone will be back for u .. the reason for ur phone to brick was the rom u used my phone bricked when i used gingerxperia too , but now iam using nAa rom and kernel for 2 months now and never encountered a problem . dont worry again about the brick , it happens
Sent from my E15i using xda premium .
Using nAa kernel / miniCM7 2.1.6

Leomb said:
Hello Acudor.
Thanks for the reply and for the recommendation.
Unfortunately until I don't solve this problem, my cellphone won't work to try that.
Click to expand...
Click to collapse
Just use PC comapnion from SE and repair you phone....and after that root your phone again and install rom( for rooting and cwm the best tool is x8toolbox)

Ok
Thanks for the replies. Thanks god I could make it works!
Just a couple of notes:
1.- The only way to access to the Xperia x8 was via flashing it.
2.- PC Companion didn't work at all. Even when I could access to the phone via flash, at last PCC gave a error message saying that there weren't any update to install. It seems SE doesn't support this phone yet lol
3.- What worked efectively was Flashtool (second option in this thread: http://forum.xda-developers.com/showthread.php?p=12442257)
But the ROMs listed in step 2 of that guide (X8 Shakira E15i_2.1.1.A.0.6_generic.ftf, X8_1.6_clear.ftf, X8_2.0.2_China.ftf, SE x8_2.1_rus.ftf) didn't seems to work to me. So instead of those, I searched and put into the "firmware" folder of Flashtool this oficial ROM:
http://www.multiupload.com/VKNI6Q6ET5
that I found in this thread:
http://forum.xda-developers.com/showthread.php?t=1454954
What I'd like to ask now, just to not have the same problem again is, should I go for nAa for my Xperia X8?
I found this thread http://forum.xda-developers.com/showthread.php?t=1350484
It seems difficult breaking bootloader for a noob like me though xDD

You can use GDX without any problem with stock kernel. So, its not mandatory to open bootloader but its recommended if you want to try CM9 based roms.
If you try to open bootloader, please go through the threads on xda and make sure that its safe to open it. Some phones are not safe to open and you may get your phone bricked. Please check the number behind your battery on the phone and make sure from xda if its safe. Also s1tool tells if its safe or not.

Hello!
Well, thanks for your support I could revive my phone!!! And now I could install the nAa ROM!!
THANK YOU THANK YOU!
If it's possible I'd like to ask the last question, I've tried to install from Market an application for writting japanese keyboard: Japanese IME Kaede v3
[http:]//es.androidzoom.com/android_applications/tools/japanese-ime-kaede-ime-v3_dvn(dot)html
But the Market say "This device is not compatible with this element"
Is it possible? I mean, the official firmware I was using before trying to install this custom ROM allowed me to use it without any problem.
Have you ever got a message like this? Have I got to do something?
Thanks again

Leomb said:
Ok
Thanks for the replies. Thanks god I could make it works!
Just a couple of notes:
1.- The only way to access to the Xperia x8 was via flashing it.
2.- PC Companion didn't work at all. Even when I could access to the phone via flash, at last PCC gave a error message saying that there weren't any update to install. It seems SE doesn't support this phone yet lol
3.- What worked efectively was Flashtool (second option in this thread: http://forum.xda-developers.com/showthread.php?p=12442257)
But the ROMs listed in step 2 of that guide (X8 Shakira E15i_2.1.1.A.0.6_generic.ftf, X8_1.6_clear.ftf, X8_2.0.2_China.ftf, SE x8_2.1_rus.ftf) didn't seems to work to me. So instead of those, I searched and put into the "firmware" folder of Flashtool this oficial ROM:
http://www.multiupload.com/VKNI6Q6ET5
that I found in this thread:
http://forum.xda-developers.com/showthread.php?t=1454954
What I'd like to ask now, just to not have the same problem again is, should I go for nAa for my Xperia X8?
I found this thread http://forum.xda-developers.com/showthread.php?t=1350484
It seems difficult breaking bootloader for a noob like me though xDD
Click to expand...
Click to collapse
Your problem wasn't the launcher it was that you did something wrong while installing it that caused you to brick it. Always remember to factory reset your phone before and after flashing a rom just to be safe and to avoid errors.
GingerXperia V12 is quite old, go for V19 or V21b those are quite alot faster and worked really good for me, they also come with the Sony arc launcher so that's good. You also don't need to unlock your bootloader for those roms.
Sent from my E15i using xda premium

hey my friend its good to know that ur phone is back , and flashed nAa kernel and rom too u have a good courage nice progress indeed ..
ok about ur market problem did u flash gapps via recovery ?? it is recommended and written in nAa's rom thread .
Leomb said:
Hello!
Well, thanks for your support I could revive my phone!!! And now I could install the nAa ROM!!
THANK YOU THANK YOU!
If it's possible I'd like to ask the last question, I've tried to install from Market an application for writting japanese keyboard: Japanese IME Kaede v3
[http:]//es.androidzoom.com/android_applications/tools/japanese-ime-kaede-ime-v3_dvn(dot)html
But the Market say "This device is not compatible with this element"
Is it possible? I mean, the official firmware I was using before trying to install this custom ROM allowed me to use it without any problem.
Have you ever got a message like this? Have I got to do something?
Thanks again
Click to expand...
Click to collapse
Sent from my E15i using xda premium .
Using nAa kernel / miniCM7 2.1.6

Acudor said:
hey my friend its good to know that ur phone is back , and flashed nAa kernel and rom too u have a good courage nice progress indeed ..
ok about ur market problem did u flash gapps via recovery ?? it is recommended and written in nAa's rom thread .
Click to expand...
Click to collapse
Hmm.. yep. I did it. Right after flashing nAa's ROM.
Well, I suppose I'll try other options... Thanks!!!

Lagfix for 2.3.6

Does anyone know or have lagfix for 2.3.6 (XXJW4) ? please share it to me, i cant find one on the google

soulrave said:
Does anyone know or have lagfix for 2.3.6 (XXJW4) ? please share it to me, i cant find one on the google
Click to expand...
Click to collapse
To get lagfix on JW4 easly;
İf you're not rooted , just root it with CF Root link here http://download.chainfire.eu/155/CF-Root/SGS/CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip
Then most important part;
http://www.wuala.com/deeeelite/Kernels Ginger/CF-Root-ext4-v1.3-Addon.apk Download and install this apk.This is ext4 tool developed my Chainfire... easy! Just Convert to EXT4 and done!
Also don't forget to change to RFS when you want to flash from odin or a custom rom like ICS/JB or custom GB (Dmore or so... ) from CWM!
Cheers

dreamer94 said:
To get lagfix on JW4 easly;
Just Convert to EXT4 and done!
Also don't forget to change to RFS when you want to flash from odin or a custom rom like ICS/JB or custom GB (Dmore or so... ) from CWM!
Cheers
Click to expand...
Click to collapse
I dont get this part, can you please ?

soulrave said:
I dont get this part, can you please ?
Click to expand...
Click to collapse
When you change the ROM, you convert back to rfs with the ext4 app.

Like dark knight said,yyou need to change back to rfs in same application(ext4 addon app) when you want to flash a rom
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi

dreamer94 said:
Like dark knight said,yyou need to change back to rfs in same application(ext4 addon app) when you want to flash a rom
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
Can you tell me why?
I flash CM9 from 2.3.6 without converting back to rfs and I have no problems.
And I've done it more than once to.
Sent from my GT-I9000 using xda app-developers app

Mr Patchy Patch said:
Can you tell me why?
I flash CM9 from 2.3.6 without converting back to rfs and I have no problems.
And I've done it more than once to.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Because only custom kernels supporting EXT4 file system. When you flash another stock rom. stock kernel can't read your EXT4 partitions.
So you don't need to convert EXT4 again but you need to flash a custom kernel with EXT4 again to rom to boot it.
CM using totally different file system. It's using yaffs and ext4. It converts itself whilebyou flashing.
Sent from my GT-I9000 using xda app-developers app

burakgon said:
Because only custom kernels supporting EXT4 file system. When you flash another stock rom. stock kernel can't read your EXT4 partitions.
So you don't need to convert EXT4 again but you need to flash a custom kernel with EXT4 again to rom to boot it.
CM using totally different file system. It's using yaffs and ext4. It converts itself whilebyou flashing.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Thanks for that. I understand it now.
What about Odin? Will that have problems to or just overwrite everything if you have re-partition checked?
Sent from my GT-I9000 using xda app-developers app

Mr Patchy Patch said:
Thanks for that. I understand it now.
What about Odin? Will that have problems to or just overwrite everything if you have re-partition checked?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Yes it will revert stock file system.

dreamer94 said:
To get lagfix on JW4 easly;
İf you're not rooted , just root it with CF Root link here http://download.chainfire.eu/155/CF-Root/SGS/CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip
Then most important part;
http://www.wuala.com/deeeelite/Kernels Ginger/CF-Root-ext4-v1.3-Addon.apk Download and install this apk.This is ext4 tool developed my Chainfire... easy! Just Convert to EXT4 and done!
Also don't forget to change to RFS when you want to flash from odin or a custom rom like ICS/JB or custom GB (Dmore or so... ) from CWM!
Cheers
Click to expand...
Click to collapse
Hi ,
I have installed the apk and converted to ext4 .. and other fixes for speeding up the Phone. I am having a Galaxy S GT I9000 (Indian version )> DDJVB 2.3.6 (valupack 2.3.6) and have just rooted using the kernel > CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS . So basically now that the phone is rooted what fixes would you recommend so that the experience is totally GREAT ! I know there are infinite solutions available on the net , hence would be helpful if you could suggest something that is tried and tested. Thanks.
Regards,
Kaustav.

Sorry i don't understand.
Did you say what fixes i can apply after lagfix?
Seems like you want some recommendation .. Hmm i think one of stock firmwares rooted and using with ext4 system would be enough
The best thing you can do i think;
Try Darky 10.4.2 JW1 rom.It is the best custom gb firmware that i've ever seen!
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi

mailppl said:
Hi ,
I have installed the apk and converted to ext4 .. and other fixes for speeding up the Phone. I am having a Galaxy S GT I9000 (Indian version )> DDJVB 2.3.6 (valupack 2.3.6) and have just rooted using the kernel > CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS . So basically now that the phone is rooted what fixes would you recommend so that the experience is totally GREAT ! I know there are infinite solutions available on the net , hence would be helpful if you could suggest something that is tried and tested. Thanks.
Regards,
Kaustav.
Click to expand...
Click to collapse
Flash Semaphore 2.7.4 custom kernal.
Sent from my GT-I9000 using xda app-developers app

Mr Patchy Patch said:
Flash Semaphore 2.7.4 custom kernal.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Hi Patchy ,
So can I flash this over CF-Root-XX_OXA_JW4-v4.4-CWM3RFS , which I have used today to root my phone which is an Indian version DDJVB 2.3.6 (valupack 2.3.6). If yes could you kindly share the download link ?
---------- Post added at 10:05 PM ---------- Previous post was at 09:49 PM ----------
dreamer94 said:
Sorry i don't understand.
Did you say what fixes i can apply after lagfix?
Seems like you want some recommendation .. Hmm i think one of stock firmwares rooted and using with ext4 system would be enough
The best thing you can do i think;
Try Darky 10.4.2 JW1 rom.It is the best custom gb firmware that i've ever seen!
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
Hi dreamer,
I have actually done the ext4 conversion, but I dont find much difference in the lag , the phone still seems a bit slow, hence I was asking for other alternatives like a better custom ROM (though I am not to keen and would like to stay with the stock ROM if possible) , or cpu overclocking , or some lag fix available . My phone is on gb 2.3.6 DDJVB Indian version and has been rooted today using Odin and kernel CF-Root-XX_OXA_JW4-v4.4-CWM3RFS. Sorry for all the questions , I am a newbie here..so please bear

mailppl said:
Hi Patchy ,
So can I flash this over CF-Root-XX_OXA_JW4-v4.4-CWM3RFS , which I have used today to root my phone which is an Indian version DDJVB 2.3.6 (valupack 2.3.6). If yes could you kindly share the download link ?
---------- Post added at 10:05 PM ---------- Previous post was at 09:49 PM ----------
Hi dreamer,
I have actually done the ext4 conversion, but I dont find much difference in the lag , the phone still seems a bit slow, hence I was asking for other alternatives like a better custom ROM (though I am not to keen and would like to stay with the stock ROM if possible) , or cpu overclocking , or some lag fix available . My phone is on gb 2.3.6 DDJVB Indian version and has been rooted today using Odin and kernel CF-Root-XX_OXA_JW4-v4.4-CWM3RFS. Sorry for all the questions , I am a newbie here..so please bear
Click to expand...
Click to collapse
Yes you can flash it over. I dont have the link, but google search "semaphore 2.7.4 xda" and you should easily find it.
I flash the kernal via pda in odin.
Sent from my GT-I9000 using xda app-developers app

Mr Patchy Patch said:
Yes you can flash it over. I dont have the link, but google search "semaphore 2.7.4 xda" and you should easily find it.
I flash the kernal via pda in odin.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Hi Patchy,
Flashed the semaphore 2.7.4 ... working pretty good..smooth. But found the screen display to be different, there was a greenish tinge to it (specially when screen goes on/off) but this has resolved after Semaphore auto brightness enabling in the semaphore app. What other tweaks would you recommend using this kernel ? What does the busybox exactly do? I mean what would happen if I enable it and also do you recommend overclocking to 1.2Ghz ? Thanks for all the help and PATIENCE

mailppl said:
Hi Patchy,
Flashed the semaphore 2.7.4 ... working pretty good..smooth. But found the screen display to be different, there was a greenish tinge to it (specially when screen goes on/off) but this has resolved after Semaphore auto brightness enabling in the semaphore app. What other tweaks would you recommend using this kernel ? What does the busybox exactly do? I mean what would happen if I enable it and also do you recommend overclocking to 1.2Ghz ? Thanks for all the help and PATIENCE
Click to expand...
Click to collapse
The colors on your screen are different because its "voodoo color" in my opinion looks awesome.
I always OC to 1.2 and set my touch screen sensitivity to the middle option (forget what its called) you'll find that under additional kernal tweaks in semaphore manager. I also modify my build.prop a lot under system/build.prop. using root explorer.
Just leave busy box alone. Don't worry about it. But after flashing semaphore 2.7.4 your going to need to download super user from the market to gain root access again.
Sent from my GT-I9000 using xda app-developers app

Mr Patchy Patch said:
The colors on your screen are different because its "voodoo color" in my opinion looks awesome.
I always OC to 1.2 and set my touch screen sensitivity to the middle option (forget what its called) you'll find that under additional kernal tweaks in semaphore manager. I also modify my build.prop a lot under system/build.prop. using root explorer.
Just leave busy box alone. Don't worry about it. But after flashing semaphore 2.7.4 your going to need to download super user from the market to gain root access again.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Yep I have installed super user from the market. About overclocking , whenever I am setting it to 1.2 , after sometime when I check it shows as 1Ghz selected. Also for over clocking , I see it at two places - under Misc. there is overclocking test apart from the normal overclocking change tab .. do i need to change at both the places ?

mailppl said:
Hi,
Yep I have installed super user from the market. About overclocking , whenever I am setting it to 1.2 , after sometime when I check it shows as 1Ghz selected. Also for over clocking , I see it at two places - under Misc. there is overclocking test apart from the normal overclocking change tab .. do i need to change at both the places ?
Click to expand...
Click to collapse
I've noticed it changed back to, but only when I rebooted my phone. Otherwise no problems.
Sent from my GT-I9000 using xda app-developers app

mailppl;
To fix the greenish color issue while locking screen,alternativly flash a xlcrt off effect for jw4 .Cant give a link right now but you said you are on indian version.Crt off effect must be specific for rom i mean you cant flash jw4 effect to indian rom because roms are different .You will lose status bar if you do that.
You must be on european version which is jw4 .Then you can flash that crt effect...
I'm from Turkey and time is 10am right now.I will at my home about 9pm so... if you really wanna use ;
lagfix
Semaphore kernel with voodoo also without greeny color,
Flash JW4 firmware (XXJW4). Then flash semaphore kernel and apply lagfix... When i'll get home ,i:ll send you a link of crt effect
Also you can search the thread of it if you dont wanna wait
Thread belongs to pantrif13 as long as i remember...
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi