Database Users

Help!! Uninstall HARDSPL goes wrong.

Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"

I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps

mitja12 said:
I think you have to find official ROM which was installed on you HD2 before you changed HARDSPL and installed cooked ROM. You'll find all official ROM's in Leo Official ROMs thread. When you find the right one install it from your SD card. Hope this helps
Click to expand...
Click to collapse
Like I said. I have used a rom from official rom thread=) I also tryed the rom from htc.com with same resoult.
Can I uninstall a bad flash or something and start from the beginning ? Cuz now im stockt in my situation.

Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.

mitja12 said:
Like I said you have to find the "right" one. It's not just any official ROM. I my case I had to install some really old ROM. Unfortunately I don't know how to find the right one, just use the trial and error method.
Click to expand...
Click to collapse
Okej! Sorry for missunderstanding. So the only way out is to try everyone ?
I was lucky to get the first released hd2 in my city, so i bett its a old one =)
Does it have to be the same language release to ?

In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.

or just to HTCs website and get it from there (assuming its not a vendor locked device)

mitja12 said:
In official ROMs thread is link to Shared folder for shipped Leo ROMs. In there are very well organised ROMs by country and carrier, you should find it quick enough. Just start with 1.43 and 1.48 and only those which matches your country and/or carrier.
Click to expand...
Click to collapse
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?

lovenvik said:
I have trayd every rom that compatibility with my region "SVE" and its not working. I still get the message "upgrade rom code error please try agen". In the 1.43 i cant find my region, does that meens that is it impossible that i could have been that release of rom ?
Does sombody knows if there any way to cheack the stock ROM from a serialnumber or somthning like that?
Click to expand...
Click to collapse
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.

lovenvik said:
Thinks getting better!
I find a new SD card, so i use this insted of the stock SD card.
No a white screen with a blue "Loading..." text appers.
BUT. its always a BUT. In this screen the phone freeze.
Click to expand...
Click to collapse
does it freeze on the HTC splash screen?

djchubbs said:
does it freeze on the HTC splash screen?
Click to expand...
Click to collapse
Dont realy know what that its. But I press vol down and start bottom. Then the tri-colored screen shows up "bootloader" for about 1 second. Then i got this screen http://img405.imageshack.us/i/20090607028.jpg/
I have let it load for about 20min, then i gave up.

I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)

Its seems i also have a problem flashing a stock rom for warranty reasons.
I did the following steps:
1. Get an official stock rom. (in my case it would me a NLD ROm 1.48)
2. Put it on storage card en change to LEOIMG.nbh
3. Turn of phone, press volume down en power up unntil tri color screen apears.
4. Follow steps on sreen.
But. I dont get step 4. On step it says for 1 sec ''loading''. After that, it goes back to the trii colour HARDSPL screen.
Does anyone know what im doing wrong?
I tried two different SD cards. A 2 gb version and a 4 gb version (both from Scandisk formatted as FAT32)
Is there a way/possible to flash a stock rom using activesync?

zenkinz said:
I'm afraid to say this, but you have SPL 2.07, which means you are on 'official SPL' and can only flash TMOS Official ROM (since the only SPL 2.07 is tied to US ROM)
I think the only way is to use goldcard, to flash your country's official ROM via sdcard (although I'm not sure if that will work, because I read some folks have problem with that)
Click to expand...
Click to collapse
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.

lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
hehe thats the same reason i want to sent my phone back.. its probably cost 213,- euro for me

You flashed it using the SD card method?
People with the same problem in this thread:
http://forum.xda-developers.com/showthread.php?t=630843
In post #64 fards helped XMOO get the device working again, only with SPL 2.07... maybe the rest of the thread provides more info or solutions. I didn't read any further.

lovenvik said:
Hello!
Like the title says: HARDSPL goes wrong.
I need to uninstall hardspl so i can use my warranty.
I have follow the tutorial in this thread how to uninstall it http://forum.xda-developers.com/showthread.php?t=611433
When the flash is compleated and its time for reboot i got this message http://www.youtube.com/watch?v=hWWpBbQTPb8
If i take out the memorycard and reboot i got this message http://www.youtube.com/watch?v=O4S-Rcqwlsc
If i try to reflash i getting the same message as the firs plus it says "upgrade ROM code error please try agen"
Can some one please help me out with this?
And yes i have done a hard reset.
And yes i have try to boot via usb to reflash.
If its to any help i used a ROM from this thread http://forum.xda-developers.com/showthread.php?t=577717 tha one called "LEO2.07"
Click to expand...
Click to collapse
why dont you try out from this thread ,it has videos to how uninstall hspl
http://forum.xda-developers.com/showthread.php?t=621930

lovenvik said:
Okej :O. Im not 100% sure what you meen, but is my warranty valid then?
Im gona send my hd2 in to htc cuz my display is broke. So i perhaps get a new phone. So the only thing im intrested in is to get my warranty valid.
Click to expand...
Click to collapse
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x

EddyOS said:
No, your warranty is invalid as you're using an SPL/ROM not for your region - hence why you shouldn't flash a ROM from the SD card as this is the issue you have. You're now stuck with a broken HD2 until HSPL can be used on SPL 2.x
Click to expand...
Click to collapse
Okej. Thats not good Hope some one release a HSPL 2.xx then =) But now i can't even use my phone anymore.

(just to double check)when you boot to bootloader, what does it say next to spl?
if it says spl 2.x then the above posts are correct, and you are stuck with spl2 until hspl2 is released.
You CAN get your phone working again, even with spl 2.
You need a goldcard, and you can then flash the 2.x official rom which will at least get your phone working. Once it is working, you can then flash custom roms using sspl BUT ONLY roms based on the 2.x official rom, and you won't be able to change radios using sspl. The only way you can change your radio is flashing a 2.x official rom with the goldcard.

What did I do to my new LEO????

Well I got my new Leo 13 days ago and I've tried to make the stock ROM work to my satisfaction but between the T-Mo junk installed and terrible battery life I decided it was time to try a cooked ROM...
So I read and read and read some more...It's not my first run at this but I wanted to understand everything so I didn't end up with a $449 paperweight.
This morning I download and installed the HSPL-1024....No problems, went just as the instructions said....
I then download a 1024 T-Mo tested/approved Energy Rom and I install it on my LEO.... No problem everything went as it should. I played with the rom and wanted to try another one with a different look so I found another 1024 LEO Rom, the RoMEoS4 or something like that.... Anyway, that install went just fine...
After installing both cooked ROMS I noticed I was having freezing/locking up issues and had to keep soft reseting so after several hours of it locking up I decided to just revert back to the stock T-Mo USA rom.
I then went on here and found the exact shipped rom I had originally (I had documented the versions I had prior to HSPL and the cooked rom's)
http://beta.vbnfiles.com/index.php?...08.50.08_2_Ship.zip&directory=xmoo/Leo/TMOUS&
Instructions on here clearly explained how to revert back (for warranty purposes) so I downloaded the exact stock rom, extracted it to my desktop and renamed the nbh file leoimg.nbh.... I then copied it to a formatted 8gb SDcard and inserted it into the phone.
Instructions said to hold the Volume down botton and the Power button until it boots into the bootloader and then begins to install off the card. I did this exactly and shortly after it began loading off the card it went back to the bootloader and said "Upgrade Rom Code Error, Please try again" it then goes to a gray screen that says "Loading" and stays there...stuck.
Here's a video of what it does when I try to load off the sdcard.....
http://www.youtube.com/watch?v=eCD_-EuI1_Q
I have no idea what happened or what to do to get it out of this...
Thanks for your time!
Jess
http://i16.photobucket.com/albums/b4/jessepatty/DSC00314.jpg

Put it into bootloader mode, hook it up to your computer with USB, and run to stock image like you did with the cooked roms. That should flash it back to stock. Then, if you want to take the hspl off, you can just run the hspl program again and change it back to your lod spl. No need to use SD card.

Every time a thread like this pops up, I can't help but wish that the "flash from SD card" method and every reference to it could be eradicated from the collective consciousness of this forum and all unwitting participants who fall into this trap... at least long enough to establish that:
1) it isn't a necessary or preferred method to flash.
2) it has the potential to cause stuff like this to happen.

zarathustrax said:
Put it into bootloader mode, hook it up to your computer with USB, and run to stock image like you did with the cooked roms. That should flash it back to stock. Then, if you want to take the hspl off, you can just run the hspl program again and change it back to your lod spl. No need to use SD card.
Click to expand...
Click to collapse
I've tried that several times and it loads the HTC screen but the screen never does anything...stays on 0%

donalgodon said:
Every time a thread like this pops up, I can't help but wish that the "flash from SD card" method and every reference to it could be eradicated from the collective consciousness of this forum and all unwitting participants who fall into this trap... at least long enough to establish that:
1) it isn't a necessary or preferred method to flash.
2) it has the potential to cause stuff like this to happen.
Click to expand...
Click to collapse
I got those instructions from a very popular chef on here so I was under the assumption that was the only way to revert back from HSPL
I've learned a valuable lesson here.....Leave it the hell alone!!!!
I'm sweating bullets right now....
http://forum.xda-developers.com/showpost.php?p=6162635&postcount=86

If you can get to the boot loader, then you should be able to fix this pretty easily.
I'd do this:
Get to the boot loader, check the SPL version. Do you have HSPL 2.08?
IF no, install it using HSPL2_1024_RUN, (if you want a custom ROM option), or install the standard SPL if you want to have an "unhacked" HD2, and flash the stock ROM. Done.
IF HSPL 2.08 is installed and you want it like that to install custom ROMs, then I'd do the following, just for good measure:
run MTTY/task29 to clean out all the old stuff (see my sig line)
flash the TMOUS 2.08 Radio
flash a custom TMOUS compatible ROM

jessepatty said:
I got those instructions from a very popular chef on here so I was under the assumption that was the only way to revert back from HSPL
I've learned a valuable lesson here.....Leave it the hell alone!!!!
I'm sweating bullets right now....
http://forum.xda-developers.com/showpost.php?p=6162635&postcount=86
Click to expand...
Click to collapse
No, the new version of HSPL (HSPL2_1024_RUN) has an option to re-install the standard SPL. If I wanted to do that, i'd definitely use HSPL2_1024_RUN to do it.

donalgodon said:
If you can get to the boot loader, then you should be able to fix this pretty easily.
I'd do this:
Get to the boot loader, check the SPL version. Do you have HSPL 2.08?
IF no, install it using HSPL2_1024_RUN, (if you want a custom ROM option), or install the standard SPL if you want to have an "unhacked" HD2, and flash the stock ROM. Done.
IF HSPL 2.08 is installed and you want it like that to install custom ROMs, then I'd do the following, just for good measure:
run MTTY/task29 to clean out all the old stuff (see my sig line)
flash the TMOUS 2.08 Radio
flash a custom TMOUS compatible ROM
Click to expand...
Click to collapse
Ok thank you....
The SPL reverted back to the original 2.08 SPL when it began the install the stock rom (before it gave me the error) So it does not have the HSPL in it anymore.
I've tried all kinds of different things to fix it but I get an error or no response with everything.
I did try to reinstall the HSPL but when I try I get the below error from the HSPL2 proggie.
Critical Error
Flow 00000003
Error Code 00000004
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
I believe this is why I've not been able to fix it myself.... I'm usually pretty good with these installs. My Kaiser saw hundreds of new roms if not more and I never ran into this.
Thanks

jessepatty said:
I've tried that several times and it loads the HTC screen but the screen never does anything...stays on 0%
Click to expand...
Click to collapse
Make sure you have the sd card out of the phone. So you get into bootloader mode, and you run the rom update from the computer? Maybe try downloading the stock rom again to make sure it's not corrupted. You should be able to flash it from your computer.

Before flashing any rom I would do task29 and completely wipe the internal memory, so you don't have any issues with left over files from the last rom. That is most likely why you started having problems in the first place. I used to think oh I can just flash a rom and it will work like new, but nope I had more problems I could deal with and almost returned the damn thing. Once you know what you are doing WM is a great OS to have and the only other phone I thought even cam eclose toa WM phone was the iPhone anyG, if i'm allowed to say that here. So, task29 first then enter bootloader and the run your customruu with any rom compatible with the TMOUS HD2 1024. Any questions just holla.

jessepatty said:
Ok thank you....
The SPL reverted back to the original 2.08 SPL when it began the install the stock rom (before it gave me the error) So it does not have the HSPL in it anymore.
I've tried all kinds of different things to fix it but I get an error or no response with everything.
I did try to reinstall the HSPL but when I try I get the below error from the HSPL2 proggie.
Critical Error
Flow 00000003
Error Code 00000004
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
I believe this is why I've not been able to fix it myself.... I'm usually pretty good with these installs. My Kaiser saw hundreds of new roms if not more and I never ran into this.
Thanks
Click to expand...
Click to collapse
You should be able to install the T-Mobile Stock rom without needing HSPL I think. Make sure it's the stock rom you have... not a modified or cooked version.

jessepatty said:
Ok thank you....
The SPL reverted back to the original 2.08 SPL when it began the install the stock rom (before it gave me the error) So it does not have the HSPL in it anymore.
I've tried all kinds of different things to fix it but I get an error or no response with everything.
I did try to reinstall the HSPL but when I try I get the below error from the HSPL2 proggie.
Critical Error
Flow 00000003
Error Code 00000004
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
I believe this is why I've not been able to fix it myself.... I'm usually pretty good with these installs. My Kaiser saw hundreds of new roms if not more and I never ran into this.
Thanks
Click to expand...
Click to collapse
I wouldn't give up hope, but.... Worst case: You don't have HSPL installed, so your warranty is still good! Not the best news, I realize.

donalgodon said:
No, the new version of HSPL (HSPL2_1024_RUN) has an option to re-install the standard SPL. If I wanted to do that, i'd definitely use HSPL2_1024_RUN to do it.
Click to expand...
Click to collapse
Yeah that's what I used to put the HSPL in it. It's giving me the Critical error now.
I'll search a copy of MTTY and see if it does anything...I don't have a copy of mtty.

zarathustrax said:
Make sure you have the sd card out of the phone. So you get into bootloader mode, and you run the rom update from the computer? Maybe try downloading the stock rom again to make sure it's not corrupted. You should be able to flash it from your computer.
Click to expand...
Click to collapse
Thank you, Yes I took it out when it wouldnt load the stock rom off it.
There is no SIM or SD card in it.
No, it's not installing via my computer.....It's still sitting at 0% and been there since I began typing this thread... (30 mins) I thought I may have gotten a bad download so I've re-downloaded the stock rom twice now and still the same thing.... Sits at zero percent.

zarathustrax said:
You should be able to install the T-Mobile Stock rom without needing HSPL I think. Make sure it's the stock rom you have... not a modified or cooked version.
Click to expand...
Click to collapse
Here's where I got the stock rom.... Last link in the 1st post.
http://forum.xda-developers.com/showpost.php?p=6042320&postcount=1
I got the second one elsewhere on XDA but I can't recall where.

If you can get your phone into bootloader then just do task29. Here is the Mega link.
http://www.megaupload.com/?d=J3OELQ8I
Once task29 is done, pull your battery out and replace after 10-15 secs. Then enter bootloader again and try the stock or custom rom you want. I have been at the 0% screen before even 70% and 99% and stuck. Mine is the HTC HD2 TMOUS branded and I am currently using the AxLor Leo V9 rom and she works like a dream. Let me know if you need help.

jessepatty said:
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
Click to expand...
Click to collapse
just to double check something, you keep referring to hspl2, and you get bad model ID,, you know hspl2 and hspl1024 are different progs? I'm assuming you have a tmous? you arent trying to run the wrong hspl in your haste/panic are you?

jessepatty said:
Here's where I got the stock rom.... Last link in the 1st post.
http://forum.xda-developers.com/showpost.php?p=6042320&postcount=1
I got the second one elsewhere on XDA but I can't recall where.
Click to expand...
Click to collapse
ahh ok, that IS the stock rom, but its a repack of the 2.1 rom, not an official .exe/nbh pack. (Well, my kitchen wont import it, says its not official, and it comes with customruu)
However, look for
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship
which is the packed ship .exe. (and does open as official in the kitchen)
ill submit this, and see if i can find the link.
EDIT - heres a mirror of
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
http://forum.xda-developers.com/showpost.php?p=5688401&postcount=159
good luck

samsamuel said:
just to double check something, you keep referring to hspl2, and you get bad model ID,, you know hspl2 and hspl1024 are different progs? I'm assuming you have a tmous? you arent trying to run the wrong hspl in your haste/panic are you?
Click to expand...
Click to collapse
I am glad you pointed out this error on my part. I honestly did not know that HSPL2 and HSPL1024 were 2 different programs....
I was merely referring to HSPL1024 as the second version of HSPL....or HSPL2..... I didn't mean to create confusion... sorry about that...
To confirm I am using HSPL-1024
Jess

donalgodon said:
Every time a thread like this pops up, I can't help but wish that the "flash from SD card" method and every reference to it could be eradicated from the collective consciousness of this forum and all unwitting participants who fall into this trap... at least long enough to establish that:
1) it isn't a necessary or preferred method to flash.
2) it has the potential to cause stuff like this to happen.
Click to expand...
Click to collapse
so I'm kinda confused...you say that that you shouldn't flash from the sd card. and im sure you know more about this technically speaking than I do but what confuses me is I've been told and read MANY times by people probably more experience than both of us that flashing from your sd card IS the safest way to flash...im not saying your wrong but it concerns me because that is the method I use mainly for convience.but if this has the potential to destroy my very expensive device that I can't afford to replace I would REALLY like to know and know why. if anybody can guide me here why two different stories and maybe some reasons why one method had a higher chance for problems I would really appreciate it =)

[q] failed revert to stock dont wanna brick again!

Eyyy i tried to revert it to stock ROM!!
i copyd the downloaded RUU_SIGNED.nbh from the website of htc.com with my serial number and renamed it to leoimg.nbh and then i started boatloader and install it, after like 20% it said '' installation failed'' 2002200 error or something like that.. now imma film it with my desire hd,....
after failure it restarted to boatloader with SPL 3.03.000
i got a LEO from Europe.. WHAT NOW?!

If you downloaded from HTC it should be in an .exe format
Put your phone in bootloader (when the phone is off hold down volume down and press the power button) you should see a tricolor screen. Plug your phone in to the pc run the exe and follow the instructions through.
Sent from my HTC HD2 using XDA App

Or uncompress the .exe file with winzip. You will find the .nbh file inside.

joooe said:
Or uncompress the .exe file with winzip. You will find the .nbh file inside.
Click to expand...
Click to collapse
I unzipped it, and copied everything from the folder to the root of my sd,
then i started the installation from the boatloader. but then IT FAILED! WTF?
and after '' installation failed'' the phone restarted to the boatloader, now it shows.
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(touch) 0x30
I bricked my phone after i installed SPL2.08.oooo
they told me after that i should have installed SPL-2.08.HSPL
Now im afraid if i take out my battery, this SPL-3.03.0000 will brick it!!

Sorry i filmed it, and tried to reset it, it reset and said software update failed, then that error.
Sent from my Desire HD using XDA App

You CAN'T copy everything from the RUU...it will always fail. You just need the .nbh and rename it to LEOIMG.NBH.

ashasaur said:
You CAN'T copy everything from the RUU...it will always fail. You just need the .nbh and rename it to LEOIMG.NBH.
Click to expand...
Click to collapse
FOk, but i did.... now it shows
''UPGRADE ROM CODE ERROR PLEASE TRY AGAIN''
at the boatloader ...
before you said you should copy only RUU,
i did, but it says ''not allowed'' now...

Try to reinstall hspl
Sent from my HTC HD2 using XDA App

mynamesteve said:
Try to reinstall hspl
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
IMma not sure what it said exactly but something with '' BAD PHONE ID'' when i tried to open HSPL2_RUN
Now trying to flash the stock rom from usb it got stuck at 0%..
it says : BAD SPL VERSION!
So im stuck with SPL3.03.0000
Cant flash anything....
so what to do?!
tried to flash stock ROM from htc.com from sd
it says ''Not allow'' 20002
tried to flash it from the usb it gets stuck at 0%
cant flash to SPL 2.08 HSPL because i have spl 3.03 right..?

Let me guess, the microSD Card is a 8GB or greater - it is a known problem.
If you need to flash via the SD Card then go either for a 1, 2 or 4GB one. MAking sure that it is formatted correctly.
Forget all about HSPL right now, as the HTC ROMs or the branded versions all come with ROM, RADIO and SPL.

from your video, your SPL is not showing a model ID in bootloader.
(The top line in bootloader, Eg mine says 'PB81100 SS-BC)'
Ive seen this crop up on a few occasions, where the ID gets corrupted, or like yours vanishes completely.
Problem is now of course that all roms will give bad model ID.
I'm not sure of any fix, however if memory serves i seem to remember someone tweaked a customruu to avoid checking the model ID. (Though i couldn't immediately find it just now, , not that i tried too hard, thats your job )
Not sure if it will help, but i think id try flashing a stock rom with the tweaked RUU, if i could find it.

samsamuel said:
from your video, your SPL is not showing a model ID in bootloader.
(The top line in bootloader, Eg mine says 'PB81100 SS-BC)'
Ive seen this crop up on a few occasions, where the ID gets corrupted, or like yours vanishes completely.
Problem is now of course that all roms will give bad model ID.
I'm not sure of any fix, however if memory serves i seem to remember someone tweaked a customruu to avoid checking the model ID. (Though i couldn't immediately find it just now, , not that i tried too hard, thats your job )
Not sure if it will help, but i think id try flashing a stock rom with the tweaked RUU, if i could find it.
Click to expand...
Click to collapse
First of all, nope it was a 2gb, didnt use my 16..
second you're right when i tried to flash it it said '' BAD MODEL ID''
i got a test in a couple of hours, when i get back i will search for it a tweaked customruu whatever that is :|

Searched for it..
couldnt find it...
i guess no helpp.

I'll try remember to look tomorrow, but with all the forum changes,,,,, like finding a needle in a big pile of needles.
I may be remembering it wrong anyway.
Do google searches like
+hd2 corrupted model id inurl:forum.xda-developers.com
There are a few threads over the past year regarding model id

Searched couldnt find anything usefull.
still waiting for the saving angel............

pokerfreakje said:
Sorry i filmed it, and tried to reset it, it reset and said software update failed, then that error.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
You are not on HSPL that's why it doesn't work.

heres what i think i was thining about
http://forum.xda-developers.com/showthread.php?t=706064
Before hspl3, this workaround allowed people to bypass the model id check for particular model IDs, perhaps a blank ModelIDCheckBypass.txt (since your model ID is blank) file would work?
oops, i forgot you were also stuck on spl 3.03.0000, so even bypassing the model ID, hspl would still fail because it doesn't support spl 3.03.0000.
So, normally, only a correct stock rom (usb or sd) of lower version, ((out because of the mdoel ID) or any other stock rom through goldcard would work, but i'm not sure how goldcard would respond to no model id.
If you can get a CID for an sd card (2gb or smaller ideally), pm me with it and an email address and i can make you a goldcard image.
Gotta be worth a try.
There are several ways to find a CID, if you have another winmo phone you can use for 5 minutes, thats wayyy the easiest way.
To get you started
http://www.google.co.uk/search?q=ho...&aq=f&aqi=&aql=&oq=&pbx=1&fp=9dea53be41df0a93
http://samsamuel.co.uk/news.php?id=8

reading post :[GOLDCARD]Get your CID without a Winmo Phone
after im done, i will pm you my e-mail!

Hope u find some help here bro
http://forum.xda-developers.com/showthread.php?t=668347

[Q] Help Stuck At Bootloader!!!

So I was installing a stock rom on my device so I could return it to tmobile, but i think i may have installed the wrong type of rom. Its showing I have spl-3.03.0000 XE, and it gives me this error that states "upgrade ROM code error Please Try Again" and when I try another stock rom it gives me an error that states "wrong vendor ID" is there any way to fix this and install a stock rom once again?

The ROM you flashed, where did you download it from? If it was not from the T–Mobile website I suvvest you go download the official upgrade ROM from there, when it ask for hour IMEI number you can vet it from under battery.

T-Macgnolia said:
The ROM you flashed, where did you download it from? If it was not from the T–Mobile website I suvvest you go download the official upgrade ROM from there, when it ask for hour IMEI number you can vet it from under battery.
Click to expand...
Click to collapse
Tried installing the update off of tmobile the installation stays stuck at zero percent and the installation times out. Thanks though! Is there anything else i could do? Any help is much appreciated!!

For the sake of testing... Put hardSPL and try a custom rom to see if it boots
Sent from my HD2 using XDA Windows Phone 7 App

edwards33 said:
Tried installing the update off of tmobile the installation stays stuck at zero percent and the installation times out. Thanks though! Is there anything else i could do? Any help is much appreciated!!
Click to expand...
Click to collapse
Ok from the title of your thread here I am assuming you are puttng you HD2 into bootloader, waiting for USB in the white bar of bootloader and then flash the ROM? If you are doing this try right clicking on the RUU and select run as administrator. If that does not work try flashing it via SD card. Go to this thread to learn how to flash via SD card.

Its showing I have spl-3.03.0000 XE, and it gives me this error that states "upgrade ROM code error Please Try Again" and when I try another stock rom it gives me an error that states "wrong vendor ID" is there any way to fix this and install a stock rom once again?
Click to expand...
Click to collapse
This happens when you have hspl installed and then flash a 3.14 stock rom over sd card.
Hspl gets removed, replaced by 3.03.0000, the flash tries to continue but cant.
The first and biggest question is..... you say it's from t mobile., but what colour are the send and end keys? White? Or red and green? Since to get the error you get implies an incorrect stock rom, and incorrect stock roms kill tmous phones.please also include the complete filename of the stock roms you have tried, especially the first one that gave rom code error.

Try creating a gold card. It will force you through to flashing off the SD card. I also can JTAG this and resolve the problem for you as long as there is not physical nand-failure.

T-Macgnolia said:
Ok from the title of your thread here I am assuming you are puttng you HD2 into bootloader, waiting for USB in the white bar of bootloader and then flash the ROM? If you are doing this try right clicking on the RUU and select run as administrator. If that does not work try flashing it via SD card. Go to this thread to learn how to flash via SD card.
Click to expand...
Click to collapse
OK Tried running the tmobile official update throught the sdcard as well still no luck It just says loading and nothin happens after that.
Also tried installing HSPL but says it can not be flashed
samsamuel said:
The first and biggest question is..... you say it's from t mobile., but what colour are the send and end keys? White? Or red and green? Since to get the error you get implies an incorrect stock rom, and incorrect stock roms kill tmous phones.please also include the complete filename of the stock roms you have tried, especially the first one that gave rom code error.
Click to expand...
Click to collapse
the send and end keys are green and red.... the stock rom that gave me the error is ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship
Also have tried Installing The tmobile update directly from tmobile.com T-Mobile_HD2_MR_Software_3.14.531.1

OK I was able to get the phone to boot up by using a test rom but it still will not load up a stock rom it won't work through ruu or from sd card the spl also changed to 2.00.100 XE is there anything else i can try? thanx for the help!

Ahh see now that's a shame.
you do have a tmous, but the rom tmo_de IS NOT for your phone.
That's about as close to bricking your phone as you can get without actually bricking it.
that rom is tmo Germany, which means it is for the regular hd2. The ONLY stock roms your phone will accept are tmous stock roms. All other t mo roms from around the world are for regular hd2.
And now you made it worse by flashing a test rom with an spl which is a pain to get rid of.
In the test and stock roms thread where you found that test rom, DO NOT flash the first rom in the list, it will kill your phone.look at the end of the list and there is a version of hspl edited to work with spl 2.00
Give that a try first.
You aren't the first so Google stuck on spl 2.00.1000 and start reading.
DO NOT FLASH ANYTHING TILL YOU ARE 100% SURE OF THE EXPECTED OUTCOME.
You got real lucky, there are countless threads here that go "tmous,non tmous stock rom, phone now utterly dead",,, don't ruin it now by going flash crazy.

edwards33 said:
OK I was able to get the phone to boot up by using a test rom but it still will not load up a stock rom it won't work through ruu or from sd card the spl also changed to 2.00.100 XE is there anything else i can try? thanx for the help!
Click to expand...
Click to collapse
You need to go to the "Leo 1.5 T-Mobile Test & Stock ROMs" thread anf use the link at the bottom of post one named " HSPL with MFG SPL 2.00 support!". This is suppose to support the SPL version you have and allow you to flash HSPL to your HD2 wich should allow you to flash the official T-Mobile ROM or any custom ROM you want to flash. Good luck
Edit: You beat me to the punch Sam
Also the first stock ROM must have changed your SPL and that must have been why you could not flash the official T-Mobile ROM. Like Sam said you got very lucky, if that first stock ROM would have flashed hou would have had a bricked HD2.

OK well tried using the hspl3 but still get the error saying bad spl so I'm gunna start reading up and hope there's a way to get the stock rom back on the phone. Thanks everyone for all your help its greatly appreciated!!
Sent from my LG-G2X using XDA Premium App

You do mean the specially adapted hspl from the teststock roms thread right? Not just normal hspl3?
If so, next step should probably be goldcard.

samsamuel said:
You do mean the specially adapted hspl from the teststock roms thread right? Not just normal hspl3?
If so, next step should probably be goldcard.
Click to expand...
Click to collapse
Yea it was the one from the stock rom thread I'll read up and learn to use gold card thanks
Sent from my LG-G2X using XDA Premium App

[Q] HTC HD2 SPL Version

Alright,
Today my touchscreen stoped working. I was running android and the phone has the HSPL 2.08 version installed.
After one day trying to get it to work, i managed to flash the 6.5 win mo back. After that i thought the HSPL was gone, well you guessed already, it didn't. So i used the HSPL 4 installation tool, selected spl 2.08 and booted right into boot loader to see if it worked. And well yes it worked but here comes the question.
Now there are 4 sentences:
The first with a serial code starting with PB and ending with -BC
Second it states SPL-2.08.0000 8g XE
Third MicroP(LED) 0x05
At last: MicroP(TOUCH) 0x30
My phone is from the beginning of 2010 i want to send it to htc to let the screen be replaced, my question is: is the SPL version the right version and will there be no ugly questions from HTC if i was running android / had HSPL installed?
Already thanks!

That spl 2.x is only correct if you have a tmous.
Assuming you don't have a tmous, You should either flash the rom again but from sd, or use HSPL2 or HSPL4 to match the spl to the rom.
If you Do have a tmous, that's fine.

Prom1se said:
Alright,
Today my touchscreen stoped working. I was running android and the phone has the HSPL 2.08 version installed.
After one day trying to get it to work, i managed to flash the 6.5 win mo back. After that i thought the HSPL was gone, well you guessed already, it didn't. So i used the HSPL 4 installation tool, selected spl 2.08 and booted right into boot loader to see if it worked. And well yes it worked but here comes the question.
Now there are 4 sentences:
The first with a serial code starting with PB and ending with -BC
Second it states SPL-2.08.0000 8g XE
Third MicroP(LED) 0x05
At last: MicroP(TOUCH) 0x30
My phone is from the beginning of 2010 i want to send it to htc to let the screen be replaced, my question is: is the SPL version the right version and will there be no ugly questions from HTC if i was running android / had HSPL installed?
Already thanks!
Click to expand...
Click to collapse
It looks right to me.
The surest way to do this though is to find your stock ROM via HTC Support (international) or tmobile support (TMOUS), they will have you enter your IMEI/SN and so will ensure you get the correct stock ROM from your phone.
You have to flash via SD, RUU will not replace your SPL, but SD will replace your SPL and everything else to ensure it is on the correct stock everything.

Thanks for the reply's,
Dont got a tmous. So if im correct i need to place the the file in the .exe file from the htc support site (witch i downloaded the latest rom) named: RUU_signed.nbh toe leoimg.nbh and put in on my sd card, next i need to go into boot loader and it will do all the work?
I found a video what describes stated above: http://www.youtube.com/user/inmatrixout#p/u/6/N5gYQ3A7KqA
Thanks!

Alright,
Just put the nbh file to my sd card and renamed it to leoimg.nbh then booted into the bootloader and the 3 colord screen pops up. Next screen flashes to white with blue letters saying: loading...
Stil is there after 2 mins, in other words.. freezed.. what sould i do?
Already thanks!
Greets
Prom1se

Prom1se said:
Alright,
Just put the nbh file to my sd card and renamed it to leoimg.nbh then booted into the bootloader and the 3 colord screen pops up. Next screen flashes to white with blue letters saying: loading...
Stil is there after 2 mins, in other words.. freezed.. what sould i do?
Already thanks!
Greets
Prom1se
Click to expand...
Click to collapse
what size sd card are you using ?
If you have 2gb it will be fine just be sure to format with "fat32".
Make sure sd card work well.
Make sure your battery isnt under 50%.
And finally make sure you downloaded right rom.
thats all, try that and report back , i hope you succeed .

ubejd said:
what size sd card are you using ?
If you have 2gb it will be fine just be sure to format with "fat32".
Make sure sd card work well.
Make sure your battery isnt under 50%.
And finally make sure you downloaded right rom.
thats all, try that and report back , i hope you succeed .
Click to expand...
Click to collapse
Reporting back..
I have a 8 gb card, witch i formated to fat32, i dunnow if i got the right rom, well i got this rom: klik from the xda page klik
But i downloaded another rom from the htc site, i didnt flash it with that one, but i did with the one i provided by link.
Already thanks!
Greetz prom
Oh, and by the way, it seems that the rom i downloaded from the htc site is simalar to one i downloaded and flashed provided by me in the link above.
-- Update:
- After watching the video i provided earlier and examine it closly i saw that the hspl version (1.42) was changed to spl 1.42. I know i did install hspl 2.08 with hspl 4 and did uninstall hspl with hspl 4 just by selecting the option spl 2.08 (or something like that.) Next poped up a alert box witch told me it was done.
So im asuming its good to go for servicing..? What you guy's think?

Prom1se said:
Reporting back..
I have a 8 gb card, witch i formated to fat32, i dunnow if i got the right rom, well i got this rom: klik from the xda page klik
But i downloaded another rom from the htc site, i didnt flash it with that one, but i did with the one i provided by link.
Already thanks!
Greetz prom
Oh, and by the way, it seems that the rom i downloaded from the htc site is simalar to one i downloaded and flashed provided by me in the link above.
Click to expand...
Click to collapse
ok... if still that doesnt work try 2gb sd card and make sure you download rom from htc web site with your phone serial number, because if you have wrong rom you may brick your phone.

if it successfully flashed from SD and you do not have HSPL anymore then you are good to go.

orangekid said:
if it successfully flashed from SD and you do not have HSPL anymore then you are good to go.
Click to expand...
Click to collapse
Well thats what i wanted to tel you is if you look at the picture youll see a red line, in my case there is standing SPL-2.08.0000 8G XE, the other information is indentical to mine. So, i think i got HSPL Uninstalled, what do you think?
Thanks!

Yes, you no longer have HSPL on there, which is good.

But if I understand you, it now says 2.08 which is not ok for regular hd2. Yes it works, yes it's stock, but spl 2. ONLY ships with tmous roms, therefore any regular hd2 found with spl 2 can only have gotten in that position using hspl or Goldcard,,, both warranty voiding practices.
For reg leo, you need 1.42.0000. 1.66.0000 or 3.03.0000

Alright, the 1.66 sounds familiar. But my usb port is olmost broken. What to do what to do.. :S
from the menu i only could choos 3.03.00 so flashed it, dft we hacked it come on front but it doesnt matter... now there is this information about the spl:
SPL-3.03.0000 XE
Hope that this is the good one???
Alright, another update...
- thought to myself, 3.03 well if this is the one, the leoimg.nbh should work.. And guess what.. its updating from the leoimg.nbh witch was extracted from the exe file, witch i downloaded with my serial number.. i think im good to go
- last update
-- update complte
-- UPDATE SUCCESS
Sounds clear to me, in boot loader no hspl or something like that.. thanks for the help guy's!!
Cheers to yall!

My advice is to go to the HTC Website and download the ROM for your phone (you need to put the phone's serial number to get the ROM). Since you are returning it for repair, then it doesn't matter what version of the ROM you use as long as it is a valid one for your phone.
Take the downloaded .exe file and rename it to .zip. extract the .nbh file and rename it to LEOIMG.nbh. place it in the root of a FAT32 formatted microSD Card (less than 8GB in size).
Boot the phone into Bootloader mode and the ROM will flash - if you follow the instructions.
These stock ROMs (and the mobile phone company branded ROMs) contain the main ROM, the RADIO ROM and the SPL. and by using the SD Card method ensures that everything is flashed.

fred_up said:
My advice is to go to the HTC Website and download the ROM for your phone (you need to put the phone's serial number to get the ROM). Since you are returning it for repair, then it doesn't matter what version of the ROM you use as long as it is a valid one for your phone.
Take the downloaded .exe file and rename it to .zip. extract the .nbh file and rename it to LEOIMG.nbh. place it in the root of a FAT32 formatted microSD Card (less than 8GB in size).
Boot the phone into Bootloader mode and the ROM will flash - if you follow the instructions.
These stock ROMs (and the mobile phone company branded ROMs) contain the main ROM, the RADIO ROM and the SPL. and by using the SD Card method ensures that everything is flashed.
Click to expand...
Click to collapse
Thanks for the info, why i couldn't flash it..? I think because it was expecting a tmous rom, (2.08 spl) just redid it with hspl 4 dont ask me how i managed to do it with a broken usb port on the phone.. :S. Well i managed and did accomplish it. Rom 3.03 is on it now. Tomorrow im going to the htc store for servicing.
Thanks to all!
Greets prom!

I assume that you meant a 3.14 ROM with a 3.03.0000 SPL.

fred_up said:
I assume that you meant a 3.14 ROM with a 3.03.0000 SPL.
Click to expand...
Click to collapse
This one to be exact
RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe

How to downgrade hspl 2 from hspl 4
i flash the new official rom which is hspl 3 so i cant put any more android back to my phone ....does any one have any idea ...please need help .....

Run hspl and choose 2.08.hspl
Not difficult