Database Users

HSPL Back to original SPL anyone succeed it ?

Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...

Did you try to install the ROM from HTC website or did you find an Orange specific ROM?

It is an orange specific rom. cause it is a branded handy.
I even try from HTC website one but no satisfaction. I think it is normal by this one ?

I have a non branded "german" device.
I decided to go back from the HSPL to the stock SPL.
I wanted to flash with the Turkey 1.61 rom to have after this procedure the newest radio 2.07 on it.
I have followed the steps from bepe
But my SD card has a "goldcard" file on it.
Go to the HSPL thread and see my post #383
http://forum.xda-developers.com/showthread.php?t=611433
I have noted down all outputs during flashing.
At least I would give it a try and use a "Goldcard" to get back your original rom.
Hope it helps & Good luck!
dingolino
doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse

In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.

doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse
SD card should be formated FAT32. The original one is FAT16

What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
tictac0566 said:
In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.
Click to expand...
Click to collapse

doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?

doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?

yes confirm
tictac0566 said:
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?
Click to expand...
Click to collapse
I confirm: it happends to me: when I flashed the 1.61 HTC official rom from my SD, it replace the HSPL by the original SPL of HTC.

hi all, just want to share..
stock spl is 1.42 and after hspl 1.42hspl or 1.42.6666 if i'm not mistaken.
if to unsintall this hspl, i use flash using sd card method and it will re write radio and spl back to 1.42.
i also using turkey stock rom, but we cannot flash turkey stock rom using sd card method as it will rewrite spl and will give you error. wrong region. if this happen, in 3 colour mode, run you hspl. when it restart, make sure you push volume down button to get back in tricolour mode. if you not pushing vol down button, it will also boot in tricolour but hspl wont work, happen to me, spl back to 1.42.000. the flash using custom ruu.
just sharing with you guys.

Steve0007 said:
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?
Click to expand...
Click to collapse
It should be LEOIMG.nbh.

dont forget you might want to use MTTY to do task29 to format the device instead of CustomRUU.exe
tbh you can probably use the RUU from HTC if you have HSPL anyway.
p.s. yeah LEOIMG.nbh - LEOING.nbg made me smile - finger-twister

Okay I have tested restoring SPL1.42.0000 on a vendor-id'd phone.
Tried 2 ways of formatting the SD card:
a. formatting the sd card to FAT32 via Diskdrive mode connected to pc
b. Formatted in HD2 using onboard utility in HD2.
Tried 2 images but not the vendor-id image since I do not have that image.
a. Vendor ROM but in different language
b. Stock ROM HTC
Tried 2 ways of changing SPL back to 1.42.0000
a. Reset + vol down shows a 1 second message "Checking.", after that it immediately goes to the blue-green-red bootscreen showing bootloader 1.42.HSPL
b. From bootloader connect USB to pc and flash using stock RUU.
All combinations of above I can not restore SPL. Must be because HD2 requires correct ROM image + correct vendor-id.
Is there possibly a way to remove HSPL in some way without the original vendor image? Goldcard?

Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look

[★] said:
Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look
Click to expand...
Click to collapse
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet

htc12345 said:
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet
Click to expand...
Click to collapse
Oh sorry man

Goldcard also tried and no luck.
Every time I reboot to bootloader it gives the colored screen, proceeds to white screen with blue letters, in an instant shows: "Loading..." ..followed by: "Checking..." ..and then returns to colored bootloader main screen.
edit:
I keep thinking whether it is normal or not that the white screen doesn't show any kind of confirmation that it did actually find any nbh file whether it is valid or not. Maybe it just exits when the nbh is not valid, that may be the case.
However I have now ran the routine a whole lot of times and make zero progress.
Maybe better continue the search for the correct ROM to flash with.

just try one of the official roms posted in the official roms thread. don't try 1.61 - only 1.43/48

I have tried all official roms posted including 1.43 and 1.48 and up without success. The bootloader wouldn't go further after having checked the SD card contents. It did not work at all.
Finally now I bricked (I hope temporarily) my HD2 by trying to install the latest official 2.02 from the RUU.
Strange things have happened here.
I had earlier copied an 148 or so nbh to sd card. Bootloader would't work out as explained in posts above. So after all (with card with 148 nbh still inside) I figured it was time to check what ROM 2.02 would do, since I believe it would overwrite all SPL including HSPL since it is a v2 SPL. At least I hoped.
When I opened the RUU, it did reboot the phone as it is supposed to do with RUU.
Few things happened:
a. The phone booted in bootloader and showed me the white step screen which indicated there was a nbh about to be flashed. This was the nbh on the card!
b. The RUU errored with error 260 that the connection was lost. I have never lost a connection, must be because file on sd card took control.
c. Since connection was lost and the phone wanted a flash from the sd card I pressed vol up to continue update. it did start updating... but at about 9% I got a big triangle /exclamation mark, and HD2 stopped updating.
Reboot. Guess what??? SPL 1.42.0000 in bootloader now. From the nbh on the card.
But NO boot, NO radio .... After all I managed to destroy phone and HSPL.
Had to goldcard my way back in. However, problem solved!

[Q] My phone is not booting LEOIMG.nbh

-----------------------------------------------------------------------
SOLVED
Thanks to all the helpers; it turned out that this was the problem
Finally!
I did a complete format (not a quick one) in windows on my 2 GB card, and now it is working. Think the quick format thing was to blame for this.... As we've all been warned from before.
It's flashin' now, so I'll give you a holler if something else is up ;-))
Click to expand...
Click to collapse
-----------------------------------------------------------------------
Hello,
I've tried to search around for a solution to this problem for a few hours, so I'll dare to ask my question in a new thread
To make things short! I'm trying to reset absolutely everything to the way it was when I got the phone; radio, stock ROM, bootloader etc because I experience trouble with the phone. The problems started after I used the HTC program from the HTC website to reinstall windows mobile (for the interested, more on that in the next section). I am now trying to flash LEOIMG.nbh to the phone via the bootloader - but nothing just plain happens. I am 120 % certain that I've done everything correctly - formatting SD card to FAT32, load LEOIMG.nbh to it (and not LEOIMG.nbh.nbh, or something else) - it just won't start, and displays the tri - color screen. Says something about 2.08 HSPL, so I think the bootloader version is correct.
So, for the interested - after using Android for a few days I decided I wanted to use WM because it's better for me. So as stated above, I used the HTC installer from the HTC website to install windows mobile over some custom ROM. But having trouble with the wifi, I think it didn't install the correct radio version - do you think I am correct? In any case, I decided I wanted to do it the correct way this time, and extract the RUU_signed file to SD card and go.
Some extra info...
When starting bootloader, it says
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Numbers on HTC logo
R 2.15.50.14
G 15.42.50.11u
D 3.14.04666

memstick said:
Hello,
I've tried to search around for a solution to this problem for a few hours, so I'll dare to ask my question in a new thread
To make things short! I'm trying to reset absolutely everything to the way it was when I got the phone; radio, stock ROM, bootloader etc because I experience trouble with the phone. The problems started after I used the HTC program from the HTC website to reinstall windows mobile (for the interested, more on that in the next section). I am now trying to flash LEOIMG.nbh to the phone via the bootloader - but nothing just plain happens. I am 120 % certain that I've done everything correctly - formatting SD card to FAT32, load LEOIMG.nbh to it (and not LEOIMG.nbh.nbh, or something else) - it just won't start, and displays the tri - color screen. Says something about 2.08 HSPL, so I think the bootloader version is correct.
So, for the interested - after using Android for a few days I decided I wanted to use WM because it's better for me. So as stated above, I used the HTC installer from the HTC website to install windows mobile over some custom ROM. But having trouble with the wifi, I think it didn't install the correct radio version - do you think I am correct? In any case, I decided I wanted to do it the correct way this time, and extract the RUU_signed file to SD card and go.
Some extra info...
When starting bootloader, it says
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Numbers on HTC logo
R 2.15.50.14
G 15.42.50.11u
D 3.14.04666
Click to expand...
Click to collapse
Just some questions;
- Witch stock Rom are you trying to flash over SD?
- Witch size is your SD-card?

kurt-willems said:
Just some questions;
- Witch stock Rom are you trying to flash over SD?
- Witch size is your SD-card?
Click to expand...
Click to collapse
The stock ROM I am trying to flash, I got from the HTC support website
*I was not alloved to post links to external website, but it was supposed to be here ;-))*
So I've downloaded the latest ROM upgrade (in Norwegian, "ROM oppgradering" on the site) using a norwegian serial number I found in another thread. I've opened it with winrar, and extracted the RUU_signed.nbh file.. Does this answer you question? In one of the tutorials to reset the phone said for me to "download a RUU_signed.nbh file from *here*", but there were so many different files in there... So I just downloaded the official newest ROM upgrade from the HTC website.
My SD card is of size 16 GB, but right now I just tried with another one of 2 GB size. No change........

Why do you used a serial number which is not yours? The phone is stollen? (just kidding)... As an advice, if you want to be sure to flash the correct ROM use your own serial number on the HTC website.
If you bought your phone in another country (I've done this... from a country I can't even read a word) then put back in the original language.
When back to "original" you can always flash again the hardspl then the ROM you like in Norvegian.
Anyway with the info provided the radio has not been flashed.
info: when you say the radio flash through WiFI... nothing will never be flashed via Internet (cable or WiFi). It's downloaded on your computer then (and only then) flashed to your device.
Question: could your phone can access the SD when in your actual OS?
Idea: flash back to WM6 via USB then try again. It seems you're doing all good but that the SD is not recognized.

To be honest, I used the serial number on the forum because I couldn't be arsed to remove the battery.... )
I think you've misunderstood me a bit; I've not tried to flash the phone over wifi...
So, any suggestions as to what could be the reason for the bootloader not starting LEOIMG.nbh?

memstick said:
To be honest, I used the serial number on the forum because I couldn't be arsed to remove the battery.... )
Click to expand...
Click to collapse
That's a good reason!!!
No make sure your phone access the SD. You're actually under Anrdoid or WinMo? Honnestly I don't understand your problem (I mean I understand your problem but can't understand why... very usefull post so)

euh... by the way. The only way to go out of the bootloader if you don't flash is to remove the battery no?

I'm trying not to get into reasons to make the post short and consise; suffice to say I got some troubles (memory leak, wifi) under winmo 6.5 after I've been doing some flashin. So I want everything back the way it was - radio, bootloader, winmo 6.5. Just as if I got it for the first time! I think after all the posts I've been reading this can be done by flashing that LEOIMG.nbh from som official stock rom with the bootloader.
BUT ---- the bootloader doesn't load LEOIMG.nbh!

You think 100% right.
I'll do the test on mine and post if it works or not (I'll only flash a radio, sorry but don't want to erase all my data).

Ok, I download radio 50.14 from here:
http://forum.xda-developers.com/showthread.php?t=611787&highlight=radio
Rename exactly as you write in the post LEOIMG.nbh
Put on the root of my SD
Power the phone while holding vol down.
My phone asked directly if I want to update (so I pressed vol down to cancel).
You can try with the same file to see if the file you have is corrupted.
If it's the same... SD access problem??? So HW problem... not good.
You can try to reflash the HSPL just in case.

Don't know if it will help but my HSPL gives a different info:
PB81100 HX-BC
SPL-2.08HSPL 8G XE
0x05
CotullaHSPL 0x30
So all is the same except I have 0X30 and you 0x40
My HD2 is a European on (non-TMOUS).

Tried reflashing the HSPL. I noticed something interesting actually..
The screen flashes grey for about 100 ms! So when I enter bootloader with <vol down>, it shows tricolor screen, then flashes grey, then comes back into tricolor... Think I read something similar in another post...
Thanks for trying so hard to help mister! I don't know if it is my english or anything, but I'm trying to flash the entire stock ROM as described in another tutorial here (still can't post links...), not just the radio..
If I knew which radio was the correct one for me, I'd just flash that one instead, but I have not found any info on this anywhere..
I'll see if I can format the SDcard to FAT32 once more and try again..

Finally!
I did a complete format (not a quick one) in windows on my 2 GB card, and now it is working. Think the quick format thing was to blame for this.... As we've all been warned from before.
It's flashin' now, so I'll give you a holler if something else is up )

Good to hear that!
You learned me something with your format.

[Q] HTC HD2 SPL Version

Alright,
Today my touchscreen stoped working. I was running android and the phone has the HSPL 2.08 version installed.
After one day trying to get it to work, i managed to flash the 6.5 win mo back. After that i thought the HSPL was gone, well you guessed already, it didn't. So i used the HSPL 4 installation tool, selected spl 2.08 and booted right into boot loader to see if it worked. And well yes it worked but here comes the question.
Now there are 4 sentences:
The first with a serial code starting with PB and ending with -BC
Second it states SPL-2.08.0000 8g XE
Third MicroP(LED) 0x05
At last: MicroP(TOUCH) 0x30
My phone is from the beginning of 2010 i want to send it to htc to let the screen be replaced, my question is: is the SPL version the right version and will there be no ugly questions from HTC if i was running android / had HSPL installed?
Already thanks!

That spl 2.x is only correct if you have a tmous.
Assuming you don't have a tmous, You should either flash the rom again but from sd, or use HSPL2 or HSPL4 to match the spl to the rom.
If you Do have a tmous, that's fine.

Prom1se said:
Alright,
Today my touchscreen stoped working. I was running android and the phone has the HSPL 2.08 version installed.
After one day trying to get it to work, i managed to flash the 6.5 win mo back. After that i thought the HSPL was gone, well you guessed already, it didn't. So i used the HSPL 4 installation tool, selected spl 2.08 and booted right into boot loader to see if it worked. And well yes it worked but here comes the question.
Now there are 4 sentences:
The first with a serial code starting with PB and ending with -BC
Second it states SPL-2.08.0000 8g XE
Third MicroP(LED) 0x05
At last: MicroP(TOUCH) 0x30
My phone is from the beginning of 2010 i want to send it to htc to let the screen be replaced, my question is: is the SPL version the right version and will there be no ugly questions from HTC if i was running android / had HSPL installed?
Already thanks!
Click to expand...
Click to collapse
It looks right to me.
The surest way to do this though is to find your stock ROM via HTC Support (international) or tmobile support (TMOUS), they will have you enter your IMEI/SN and so will ensure you get the correct stock ROM from your phone.
You have to flash via SD, RUU will not replace your SPL, but SD will replace your SPL and everything else to ensure it is on the correct stock everything.

Thanks for the reply's,
Dont got a tmous. So if im correct i need to place the the file in the .exe file from the htc support site (witch i downloaded the latest rom) named: RUU_signed.nbh toe leoimg.nbh and put in on my sd card, next i need to go into boot loader and it will do all the work?
I found a video what describes stated above: http://www.youtube.com/user/inmatrixout#p/u/6/N5gYQ3A7KqA
Thanks!

Alright,
Just put the nbh file to my sd card and renamed it to leoimg.nbh then booted into the bootloader and the 3 colord screen pops up. Next screen flashes to white with blue letters saying: loading...
Stil is there after 2 mins, in other words.. freezed.. what sould i do?
Already thanks!
Greets
Prom1se

Prom1se said:
Alright,
Just put the nbh file to my sd card and renamed it to leoimg.nbh then booted into the bootloader and the 3 colord screen pops up. Next screen flashes to white with blue letters saying: loading...
Stil is there after 2 mins, in other words.. freezed.. what sould i do?
Already thanks!
Greets
Prom1se
Click to expand...
Click to collapse
what size sd card are you using ?
If you have 2gb it will be fine just be sure to format with "fat32".
Make sure sd card work well.
Make sure your battery isnt under 50%.
And finally make sure you downloaded right rom.
thats all, try that and report back , i hope you succeed .

ubejd said:
what size sd card are you using ?
If you have 2gb it will be fine just be sure to format with "fat32".
Make sure sd card work well.
Make sure your battery isnt under 50%.
And finally make sure you downloaded right rom.
thats all, try that and report back , i hope you succeed .
Click to expand...
Click to collapse
Reporting back..
I have a 8 gb card, witch i formated to fat32, i dunnow if i got the right rom, well i got this rom: klik from the xda page klik
But i downloaded another rom from the htc site, i didnt flash it with that one, but i did with the one i provided by link.
Already thanks!
Greetz prom
Oh, and by the way, it seems that the rom i downloaded from the htc site is simalar to one i downloaded and flashed provided by me in the link above.
-- Update:
- After watching the video i provided earlier and examine it closly i saw that the hspl version (1.42) was changed to spl 1.42. I know i did install hspl 2.08 with hspl 4 and did uninstall hspl with hspl 4 just by selecting the option spl 2.08 (or something like that.) Next poped up a alert box witch told me it was done.
So im asuming its good to go for servicing..? What you guy's think?

Prom1se said:
Reporting back..
I have a 8 gb card, witch i formated to fat32, i dunnow if i got the right rom, well i got this rom: klik from the xda page klik
But i downloaded another rom from the htc site, i didnt flash it with that one, but i did with the one i provided by link.
Already thanks!
Greetz prom
Oh, and by the way, it seems that the rom i downloaded from the htc site is simalar to one i downloaded and flashed provided by me in the link above.
Click to expand...
Click to collapse
ok... if still that doesnt work try 2gb sd card and make sure you download rom from htc web site with your phone serial number, because if you have wrong rom you may brick your phone.

if it successfully flashed from SD and you do not have HSPL anymore then you are good to go.

orangekid said:
if it successfully flashed from SD and you do not have HSPL anymore then you are good to go.
Click to expand...
Click to collapse
Well thats what i wanted to tel you is if you look at the picture youll see a red line, in my case there is standing SPL-2.08.0000 8G XE, the other information is indentical to mine. So, i think i got HSPL Uninstalled, what do you think?
Thanks!

Yes, you no longer have HSPL on there, which is good.

But if I understand you, it now says 2.08 which is not ok for regular hd2. Yes it works, yes it's stock, but spl 2. ONLY ships with tmous roms, therefore any regular hd2 found with spl 2 can only have gotten in that position using hspl or Goldcard,,, both warranty voiding practices.
For reg leo, you need 1.42.0000. 1.66.0000 or 3.03.0000

Alright, the 1.66 sounds familiar. But my usb port is olmost broken. What to do what to do.. :S
from the menu i only could choos 3.03.00 so flashed it, dft we hacked it come on front but it doesnt matter... now there is this information about the spl:
SPL-3.03.0000 XE
Hope that this is the good one???
Alright, another update...
- thought to myself, 3.03 well if this is the one, the leoimg.nbh should work.. And guess what.. its updating from the leoimg.nbh witch was extracted from the exe file, witch i downloaded with my serial number.. i think im good to go
- last update
-- update complte
-- UPDATE SUCCESS
Sounds clear to me, in boot loader no hspl or something like that.. thanks for the help guy's!!
Cheers to yall!

My advice is to go to the HTC Website and download the ROM for your phone (you need to put the phone's serial number to get the ROM). Since you are returning it for repair, then it doesn't matter what version of the ROM you use as long as it is a valid one for your phone.
Take the downloaded .exe file and rename it to .zip. extract the .nbh file and rename it to LEOIMG.nbh. place it in the root of a FAT32 formatted microSD Card (less than 8GB in size).
Boot the phone into Bootloader mode and the ROM will flash - if you follow the instructions.
These stock ROMs (and the mobile phone company branded ROMs) contain the main ROM, the RADIO ROM and the SPL. and by using the SD Card method ensures that everything is flashed.

fred_up said:
My advice is to go to the HTC Website and download the ROM for your phone (you need to put the phone's serial number to get the ROM). Since you are returning it for repair, then it doesn't matter what version of the ROM you use as long as it is a valid one for your phone.
Take the downloaded .exe file and rename it to .zip. extract the .nbh file and rename it to LEOIMG.nbh. place it in the root of a FAT32 formatted microSD Card (less than 8GB in size).
Boot the phone into Bootloader mode and the ROM will flash - if you follow the instructions.
These stock ROMs (and the mobile phone company branded ROMs) contain the main ROM, the RADIO ROM and the SPL. and by using the SD Card method ensures that everything is flashed.
Click to expand...
Click to collapse
Thanks for the info, why i couldn't flash it..? I think because it was expecting a tmous rom, (2.08 spl) just redid it with hspl 4 dont ask me how i managed to do it with a broken usb port on the phone.. :S. Well i managed and did accomplish it. Rom 3.03 is on it now. Tomorrow im going to the htc store for servicing.
Thanks to all!
Greets prom!

I assume that you meant a 3.14 ROM with a 3.03.0000 SPL.

fred_up said:
I assume that you meant a 3.14 ROM with a 3.03.0000 SPL.
Click to expand...
Click to collapse
This one to be exact
RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe

How to downgrade hspl 2 from hspl 4
i flash the new official rom which is hspl 3 so i cant put any more android back to my phone ....does any one have any idea ...please need help .....

Run hspl and choose 2.08.hspl
Not difficult

[Q] 20 Euro donate for solving this problem

Hello guys... I have HTC HD2... I had searched and found probelms related with my problem but couldnt find any soloultion... I get the problem when I tried to write windows 7.5 but failed (in addition my sd card broked but it's not matter now) then I tried to write windows 6.5 again. I don't know what I did wrong but now I have this problems:
When I pressing vol down + power I see this information
On top right there write: RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Upgrade ROM code error
Please try again
1.When I open the mobile have this error:
"Software update failed. Please try again."
2.When I trying Vol Up + Vol Down + Power button all go smooth but when its boot to continue with process its showing me the above message again.
3.I have downloaded the 1.48 Rom and installed through USB but it's stack on 1% and then on the computer screen it show me this error:
"Look at first picture on Attach files"
4. When I tried to use HSPL I get this error
"Look at second picture on Attach files"
5. Have extracted 1.48 Rom and taked the RUU_signed.nbh and renamed it to leoimg.nbh, copied it to formated sd card(Fat 32) and when pressing Vol down + power i get error:
00028002
Not Allow
Don't know what other I can try to make it working... Please guys help me I have this mobile only month
PS: Yes i really donate 20 euro... because its better to give to someone who helping here people instead of giving it to shop that will ask 100 or to toss the phone... I hope a programmer can make one custom rom that will recover somehow the phone...

Wrong rom. You don't have hspl installed, you have stock 3.03.0000 and the rom you are trying to flash is either wrong provider or wrong region, and since hspl is gone, it wont flash.

samsamuel said:
Wrong rom. You don't have hspl installed, you have stock 3.03.0000 and the rom you are trying to flash is either wrong provider or wrong region, and since hspl is gone, it wont flash.
Click to expand...
Click to collapse
So that's it? My phone is gone? If i give it to mobile shop they can't to repair it either?

lol,
theres nothing wrong with it.
run hspl4 and choose any hspl you require
your lesson today? don't flash stock roms from SD CARD unless you KNOW its the correct carrier/region, , , it removes hspl and if the rom doesnt match your provider/region the flash fails the checks and cant continue. Hence 'rom code update error' and '28002 not allow' and teh big giveaway 'bad modelID'

samsamuel said:
lol,
theres nothing wrong with it.
run hspl4 and choose any hspl you require
your lesson today? don't flash stock roms from SD CARD unless you KNOW its the correct carrier/region, , , it removes hspl and if the rom doesnt match your provider/region the flash fails the checks and cant continue. Hence 'rom code update error' and '28002 not allow' and teh big giveaway 'bad modelID'
Click to expand...
Click to collapse
You didnt read well I said
4. When I tried to use HSPL I get this error
"Look at second picture on Attach files"
Click to expand...
Click to collapse
So hspl not work either

ahh well in that case, two questions
1 - what does the top line say in bootloader? (check again, dont just assume its teh same as last time you looked)
2 - which HSPL did you run? hspl.exe, hspl2.exe, hspl3.exe or hspl4.exe?

samsamuel said:
ahh well in that case, two questions
1 - what does the top line say in bootloader? (check again, dont just assume its teh same as last time you looked)
2 - which HSPL did you run? hspl.exe, hspl2.exe, hspl3.exe or hspl4.exe?
Click to expand...
Click to collapse
1 - Is the same
2- HSPL 2 and 4

If the error deff says bad modelID and you deff used hspl2 and hspl4 and in bootloader it deff shows PB81100 HX-BC, , then it must either be broke, or something I havent seen before.
Whats teh phones source? country? provider? bought sim free?

Hi, i wonder, if you take out the sd card, and use task29 to wipe out the nand.
what is happening then ?

poisas said:
Hi, i wonder, if you take out the sd card, and use task29 to wipe out the nand.
what is happening then ?
Click to expand...
Click to collapse
As far as I know, task29 requires HSPL pre-installed?
@OP, Do you have the Telstra HD2?

samsamuel said:
If the error deff says bad modelID and you deff used hspl2 and hspl4 and in bootloader it deff shows PB81100 HX-BC, , then it must either be broke, or something I havent seen before.
Whats teh phones source? country? provider? bought sim free?
Click to expand...
Click to collapse
When I bought the phone it has greek language installed on it. Is there any difference who is my provider? people writing roms without the sim card, but I have Vodafone.
poisas said:
Hi, i wonder, if you take out the sd card, and use task29 to wipe out the nand.
what is happening then ?
Click to expand...
Click to collapse
I don't know to which task you are reffering... Can you send me link please? And if it need HSPL I can't install it

You are on the right track with ruu _sign.nbh... renaming it to Leo... and placing it to the root of SD.... look for the right stock rom that matches with your country and provider... I know with US I have to rename to Leo... try renaming it n try without renaming... see if that will boot after inserting it in the root of SD... just turn phone on and hopefully that will fix it...
currently trying to search for that stock rom... I remember xda have a thread of all the stock rom, it was a pretty long list...

kompheak said:
currently trying to search for that stock rom... I remember xda have a thread of all the stock rom, it was a pretty long list...
Click to expand...
Click to collapse
I think you don't have to, because OP can download the rom from HTC's webpage. And the ROM will be the one he needs because the site checks IMEI...

ok, he has spl but not hspl instaled, v3.03.
so what i would try. 1) remove sd card.
second try to flash over usb orginal rom 3.14v
if its branded - look for branded, if its not then RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
and then see what happens.
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
there is some branded roms
---------- Post added at 07:45 PM ---------- Previous post was at 07:38 PM ----------
Marvlesz said:
As far as I know, task29 requires HSPL pre-installed?
@OP, Do you have the Telstra HD2?
Click to expand...
Click to collapse
I think also he has telstra because there are some discussion about problems and error with hspl
here is a thing you can try.
http://forum.xda-developers.com/showthread.php?t=706064

Spaqin said:
I think you don't have to, because OP can download the rom from HTC's webpage. And the ROM will be the one he needs because the site checks IMEI...
Click to expand...
Click to collapse
Most of the ROM access via IMEI for older devices including HD2 seems to be removed by HTC or if it is available it is very very hard to locate .
I know Hong Kong HTC site still has ROM via IMEI available but HTC Europe/UK ect does not ..
---------- Post added at 05:54 PM ---------- Previous post was at 05:49 PM ----------
poisas said:
ok, he has spl but not hspl instaled, v3.03.
so what i would try. 1) remove sd card.
second try to flash over usb orginal rom 3.14v
if its branded - look for branded, if its not then RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
and then see what happens.
Click to expand...
Click to collapse
I think as Poisis points out trying to flash via USB a ROM that would be correct for SPL3.03 you got installed & CID (Country ID) of device is only possible step forward unless the MTTY tool can be of any use !

Guys problem fixed... should use the greek official rom not the english... thanks all you all guys... and especially samsamuel, kompheak. As I promised I will donate 10 euro each one. Send me your paypal links via pm

Glad you fixed it... you keep my share of the euro... treat yourself...

help please!! htc hd2 tmobile software update failed.,! cant use my phone now.

i have here my phone htc hd2 i update the rom,but it stock to 8% then i tried the sdcard process but it also stock at around 5%...now whenever i start my phone it have a error saying software update failed please try again..i did a couple research and i think i will not supposed to do it by my self..,i need a professional and experienced dude to pLEASE help me with this.,,please please please...im a newbie here,,

what are you updating? the windows mobile rom 6.5?

luciferps said:
what are you updating? the windows mobile rom 6.5?
Click to expand...
Click to collapse
no sir i just wanna open up my phone..,i dont know 1 day it was working fine then the battery drained then when i open my phone it was stock at stick together screen..so i plan to update the rom.,,,I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside? I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
hope you can help me sir..i see there that we have the same phone..,
btw here what in my rainbow screen
RUUNBH
PB81120 SS-B3
SPL-2.08.HSPL 8GXE
0x05
CotullaHSPL 0x05
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN

WHen i was googling rom version 2.13.531, i happened to notice this post, from september 2010, , , (source)
Thank you for the reply.
I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside?
I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
Click to expand...
Click to collapse
call me Mr suspicious, but compare the wording to your post...
miko30 said:
no sir i just wanna open up my phone..,i dont know 1 day it was working fine then the battery drained then when i open my phone it was stock at stick together screen..so i plan to update the rom.,,,I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside? I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
hope you can help me sir..i see there that we have the same phone..,
Click to expand...
Click to collapse
amazing that two posts, almost two years apart are identical.

samsamuel said:
WHen i was googling rom version 2.13.531, i happened to notice this post, from september 2010, , ,
call me Mr suspicious, but compare the wording to your post...
amazing that two posts, almost two years apart are identical.
Click to expand...
Click to collapse
ahaha,,sir i copied that post and post it here because we have the same problem here..,and that post didnt give any idea how can i fix it..,so i tried here at xda dev.forum ..maybe someone can help me.,, i cant find any stock rom for my phone..and also i didnt know what current rom applied to my phone.,
all i just want is boot my phone back to its life.,,please please help me..im trying to fix this phone all day and nothing works..,until now im still searching to make my phone boot..,its allready 12:05am here gotta go to bed now..and i hope someone tommorow can help me thru this.,,THAnks btw for your reply

lol, fair enough.
ok, take the ROM.exe (that you downloaded from t mo,, it is definitely a tmous, right? green send key?)
anyway, right click the .exe file,, choose rename, change the .exe to .zip, then double click the zip file to open it, find Ruu_signed.nbh, extract it, rename it to leoimg.nbh , copy it to an Sd card that is 4GB or smaller (important, bigger cards won't work)
card into phone, reboot into bootloader, flashing should staRt. tell us what the blue writing on grey background says.if you don't see it you did something wrong.

samsamuel said:
lol, fair enough.
ok, take the ROM.exe (that you downloaded from t mo,, it is definitely a tmous, right? green send key?)
anyway, right click the .exe file,, choose rename, change the .exe to .zip, then double click the zip file to open it, find Ruu_signed.nbh, extract it, rename it to leoimg.nbh , copy it to an Sd card that is 4GB or smaller (important, bigger cards won't work)
card into phone, reboot into bootloader, flashing should staRt. tell us what the blue writing on grey background says.if you don't see it you did something wrong.
Click to expand...
Click to collapse
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,

miko30 said:
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,
Click to expand...
Click to collapse
If you are absolutely sure that the ROM you downloaded (and the radio it contains) are the right ones for your phone, then go to the boot loader and see what it says for SPL. If you do not find HSPL, flash HSPL 2.08 and then try the ROM.
Flashing aborting or getting stuck early on is an indicator of the flashing process bring stopped by SPL...
Swyped from my HTC HD2 using XDA Premium

miko30 said:
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,
Click to expand...
Click to collapse
Samsamuel can tell you better but it sorta sounds like yet another stuck radio seeing as it is hanging at the 5% to the 8% area during flashing. I am not sure exactly when but hang in there and let Samsamuel post again he can give you your list of options better than I, hope you get it going again my friend.
---------- Post added at 11:08 PM ---------- Previous post was at 11:03 PM ----------
ph03n!x said:
If you are absolutely sure that the ROM you downloaded (and the radio it contains) are the right ones for your phone, then go to the boot loader and see what it says for SPL. If you do not find HSPL, flash HSPL 2.08 and then try the ROM.
Flashing aborting or getting stuck early on is an indicator of the flashing process bring stopped by SPL...
Swyped from my HTC HD2 using XDA Premium
Click to expand...
Click to collapse
If it was a SPL issue then that means it is a CID or a MID issue and if it is that then the Rom would not even start to flash at all no matter if it is via RUU or SD card. If the CID or the MID is wrong it would through a error saying something like "CID mismatch" or "Model I'D mismatch" when trying to flash.

T-Macgnolia said:
Samsamuel can tell you better but it sorta sounds like yet another stuck radio seeing as it is hanging at the 5% to the 8% area during flashing. I am not sure exactly when but hang in there and let Samsamuel post again he can give you your list of options better than I, hope you get it going again my friend.
Click to expand...
Click to collapse
how can i check my radio version?? i cant boot my phone.,,when i open my phone it says software update failed please try again..,before i change my spl..the version that i got there is (spl 2.10) then i change it to (2.08) so i can try to reflash thru sdcard..btw i got the rom from the htc-tmobile website,.it something like 3.xx.xx.xx like that...i dont know where i can find a stock rom for my phone...please help..
HERE THE VESION IM TRYING TO UPDATE MY PHONE..I GET FROM TMOBILE WEBSITE version 3.14.531.1
anyone?? what if i try to use a diff radio like this radio LEO 2.15.50.14 ??

miko30 said:
how can i check my radio version?? i cant boot my phone.,,when i open my phone it says software update failed please try again..,before i change my spl..the version that i got there is (spl 2.10) then i change it to (2.08) so i can try to reflash thru sdcard..btw i got the rom from the htc-tmobile website,.it something like 3.xx.xx.xx like that...i dont know where i can find a stock rom for my phone...please help..
HERE THE VESION IM TRYING TO UPDATE MY PHONE..I GET FROM TMOBILE WEBSITE version 3.14.531.1
anyone?? what if i try to use a diff radio like this radio LEO 2.15.50.14 ??
Click to expand...
Click to collapse
I do not want to highjack this thread so after this post I will be contacting you via PM, or if you use G Talk you can hit me up on that. If you have a TMOUS HD2 I have the 3.14 stock RUU for theTMOUS HD2 on my computer and I can upload it for you if you want. But I think the ROM you have is the same as the one I have.As far as checking your radio version if you can not boot your device at least to the T-Mobile screen with the red text at the bottom left corner then you can no check your radio version.

T-Macgnolia said:
I do not want to highjack this thread so after this post I will be contacting you via PM, or if you use G Talk you can hit me up on that. If you have a TMOUS HD2 I have the 3.14 stock RUU for theTMOUS HD2 on my computer and I can upload it for you if you want. But I think the ROM you have is the same as the one I have.As far as checking your radio version if you can not boot your device at least to the T-Mobile screen with the red text at the bottom left corner then you can no check your radio version.
Click to expand...
Click to collapse
do you have any facebook account sir,,maybe we can contact each other thru facebook..,yeah maybe that should work 3.14 ruu sir..,can you upload it on mediafire sir if its ok to you..and i cant go thru that t mobile screen with red text sir, when i open my phone it just stuck on black screen with a message "software update failed please try again.." and whats up with the vibrating?? my phone keeps vibrating..

yea I'm with TMacgnolia, , sounds like a stuck radio (albeit it's sticking earlier in the process than expected, perhaps indicating the stuck spl variant.)
combined with the vibrating I'd be thinking hardware, so I'd be trying sd flashing using the freezer trick.

samsamuel said:
yea I'm with TMacgnolia, , sounds like a stuck radio (albeit it's sticking earlier in the process than expected, perhaps indicating the stuck spl variant.)
combined with the vibrating I'd be thinking hardware, so I'd be trying sd flashing using the freezer trick.
Click to expand...
Click to collapse
sir yeah we manage to install a custom rom but the problem now is i think its on the cpu..,is there any way to fix this hardware problem..,

I could use some help, having the problem described earlier. I can't get past the 4color boot loader screen, - for a fraction of a second it goes to the insalling screen then comes back to 4color with "Serial" in the white.
Here is what I have on my HD2: Android 2.3.5 Radio 15.42.50.11U_2.15.50.14
Here is what I have tried to install through sd card: RUU_Leo_1_5_TMOUS_2.13.531.1_Radio_15.39.50.07U_2.10.50.26_Signed_LEO_Ship.zip (renamed .zip, was .exe) and T-Mobile_HD2_MR_Software_3.14.531.1.zip (renamed .zip, was .exe)
I tried 3 different sd cards; (2) 2 gig cards (1) 4gig cards. I reformated several times before copying and renaming the nbh file.
What next? Thanks

just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.

samsamuel said:
just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.
Click to expand...
Click to collapse
Thanks. That makes sense. I can't check for 6 or 7 hours until I get home for the day. I'm using W7, and have never really gotten how to view the real extension on a file, not like the good old DOS days. yes I have a tmous. After requesting the help, I tried the same card in my brother's HD2 that I need to restore as well, and got the same response, so it has to be the card/name not my HD2. I'll post back when I check it out. Thanks again.

samsamuel said:
just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.
Click to expand...
Click to collapse
I renamed the file, making sure there was only one .nbh extension. Still not working. I tried it with both tmos roms, I reformated the card, I tried it on both phones. Obviously, I have done something wrong with the file, but read and re-read the instructions and I can't find what it is.
Any ideas would be great.