Hi,
I have an X8 E15a. It's rooted with custom firmware and custom rom.
The problem is that it is SIM locked...
I have read that all SIM UNLOCK software require STOCK 2.1 roms. Is it true?
1-.So, how can I go back to stock rom? Is there and custom recoverye flashable stock?
2-.Is there any way to sim unlock (besides of course contact my local carrier and ask for it).
Best Regards.
1. You an flash it, with SEUS or PC Companion, you can download them from SE's web page, or yo can flash it with FlashTool (Easiest way: SEUS or PCC)
2. You can unlock your phone on different webpages, where you pay, and they give you instructions for unlocking your phone
her3814 said:
1. You an flash it, with SEUS or PC Companion, you can download them from SE's web page, or yo can flash it with FlashTool (Easiest way: SEUS or PCC)
2. You can unlock your phone on different webpages, where you pay, and they give you instructions for unlocking your phone
Click to expand...
Click to collapse
PC Companions says "There is no Software Available Try Later"...
SEUS says "No Updates Available"
Dont go to updqte software go to repair!
Sent from my Shakira using XDA App
dsaklein said:
Dont go to updqte software go to repair!
Sent from my Shakira using XDA App
Click to expand...
Click to collapse
Same thing with repair...
check ur baseband, for some solutions is baseband match required
This is so weird...
I'm using FLASHTOOL using this guide:
http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
I flashed this rom:
SE x8_2.1_rus.ftf
Which is 2.1 right? Well... now it's on Android 1.6.
I said "hey maybe I made a mistake..." and downloaded from this page:
http://forum.xda-developers.com/showthread.php?t=875688
This file:
E15a android 2.1.1 SI 1243-9502 Sony
So... following this page:
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
I made an FTF file with it... and flashed it.
To my surprise I am still on Android 1.6 also BASEBAND shows UNKONWN.
SEUS and PCC still shows NO UPDATE for my phone, even using REPAIR.
Please, I need help with it.
So I flashed baseband for E15A from this page:
http://forum.xda-developers.com/showthread.php?t=976538
But now my phone is stuck on Sony Ericsson logo... not even Android 1.6
When I try to flash a "made by me" FTF file it gives me a;
28/018/2011 19:18:58 - ERROR - Error flashing. Aborted
I can only flash: SE x8_2.1_rus.ftf which is for 15i i think...
It seems that the problem is that I flashed a FTF for a 15i and now I'm stucked in Android 1.6 and can't do anything...
UPDATE:
Now I'm on this rom: X8 Shakira E15i_2.1.1.A.0.6_generic.ftf
And flashed this baseband: Baseband 015 - kernel 2.1.1.A.0.6
Do you think it's OK for unlocking?
UPDATE2:
UNLOCKED WORKED FINE WITH: X8 Shakira E15i_2.1.1.A.0.6_generic.ftf
I used a software called: Multi Unlock CLient
Best Regards.
That´s free, isn´t it?
So that means, we can unlock for free?
Because I´ve found a download link for that software, so I can get it for free/it´s really free.
And another question:
Will does be compatible with unlocked bootloader?
codfreak said:
That´s free, isn´t it?
So that means, we can unlock for free?
Because I´ve found a download link for that software, so I can get it for free/it´s really free.
And another question:
Will does be compatible with unlocked bootloader?
Click to expand...
Click to collapse
No, it's not free.
For unlocking purposes you need a USERNAME and PASSWORD.
I did not tried UNLOCKED bootloader as it says that it might "relock" your phone.
Related
Greetings,
I had a short visit to Dubai and I've bought an X10 from the airport on my way back home. I had it sealed and I opened it when I got back.
It was shocking that it had no android market and I am stuck with the phone and can't replace it.
I just want to have the firmware other than the one loaded to it that is specific for Dubai with no android market, I've been reading in this forum and I guess this process is called "rebranding" if I am correct? Please guide me to how to get android market on my handset because they do cheat people when they sell android handset without market application.
Hi.
You could follow steps 1 to 6 HERE which will "debrand" the phone, then run SEUS for the latest FW, or should you want to root the phone you could follow all the steps.
I've followed the instruction till step 6 then I ran SEUS but it says my phone is up to date. I didn't do step 7.
I have the market now showing up, I will try it and get back to you. But I am wondering why SUES gave me no updates?
My baseband version is 1.1.27 and my build number is R2BA023
Are these the latest versions?
I've used the market app and downloaded my first application. I am really thankful for your help.
I do have a question, before I do steps (from 1 to 6) my build version was R2BA024 and after I did all you said I am stuck with R2BA023, when I try SUES or OTA update it says my phone is up to date. What does this mean? I can't update my phone anymore?
plz Re-post the link
XperienceD said:
Hi.
You could follow steps 1 to 6 HERE which will "debrand" the phone, then run SEUS for the latest FW, or should you want to root the phone you could follow all the steps.
Click to expand...
Click to collapse
i have the same exact problem as HUNCH...BUt when the click on ur link im getting this message
Invalid Thread specified. If you followed a valid link, please notify the administrator
please repost the link...
n do tell can i update my phone after that using SEUS or not?
Thx in advance!
Download Flashtool with a generic firmware, flash it into your phone and enjoy your unbranded phone with the market. After flashing with Flashtool use SEUS to be sure everything is cleaned with a clean install with SEUS.
PlayGunsta said:
Download Flashtool with a generic firmware, flash it into your phone and enjoy your unbranded phone with the market. After flashing with Flashtool use SEUS to be sure everything is cleaned with a clean install with SEUS.
Click to expand...
Click to collapse
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download it?
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now?
4)Should i back up my phone before doing this?
5)there is Slide me(sam 4.0) pre-installed?...does this remain?
6)wat is debranding? should i do it too?
7)Can i update my phone usind SEUS after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Thx!
evilmonk69 said:
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download that firmware
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now? Can i update my my phone using SEUS or not?
4)should i back up my phone before doing this?
5)There is slide me market(sam 4.0) pre-installed...does this remain in my phone after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Click to expand...
Click to collapse
I don't know what you want to backup, but you could sync your contact/agenda etc with google. After that, download firmware .435 Generic and flash it into your phone. You will now have a unbranded device with market.
AFter doing that, you can optimize your ROM with Flashtool, install xRecovery, root etc... After the flashtool installation you will lose EVERYTHING. So be sure you back-up all important things.
PlayGunsta said:
I don't know what you want to backup, but you could sync your contact/agenda etc with google. After that, download firmware .435 Generic and flash it into your phone. You will now have a unbranded device with market.
AFter doing that, you can optimize your ROM with Flashtool, install xRecovery, root etc... After the flashtool installation you will lose EVERYTHING. So be sure you back-up all important things.
Click to expand...
Click to collapse
thank you for the quick reply...
sorry for being such a noob but i still have some doubts
is it enough if i use back up and restore application.
n Just to be sure after this process can i use SEUS to update my phone regularly?
n how different is debranding from flashing?
evilmonk69 said:
thank you for the quick reply...
sorry for being such a noob but i still have some doubts
is it enough if i use back up and restore application.
n Just to be sure after this process can i use SEUS to update my phone regularly?
n how different is debranding from flashing?
Click to expand...
Click to collapse
Back up and restore could be fine if it does backup everything you want.
Debranding means that your phone is not LIMITED to one provider with software updates. So when SE releases a firmware you will have to wait till your provider releases the firmware for you. But when you debrand you get updates from SE and not your provider.
evilmonk69 said:
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download that firmware
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now? Can i update my my phone using SEUS or not?
4)should i back up my phone before doing this?
5)There is slide me market(sam 4.0) pre-installed...does this remain in my phone after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Click to expand...
Click to collapse
Well technically this isn't debranding because your phone is not carrier branded (It's just a generic UAE with no Market).
This is just switching to another region which has Android Market. But the way to do this is exactly the same as when debranding a phone.
Android Market isn't available in the UAE region.
So if you re-flash with another region and get market, and still using a SIM from the UAE I think it would block any content. But then you could root your phone and use Market Enabler to fake another carrier and get Android Market to work.
But since you "brought it home" I can say that reflashing it to another region will get you Android Market and it will work. You don't need to back up your UAE firmware when replacing it with another region firmware, and after you've flashed it with another region firmware SEUS or PCC will always flash to that region firmware.
If you flash to another region you won't have SlideMe Market, because all other region firmwares all have access to Android Market and therefor comes with Android Market pre-installed instead.
I remember when the first 2.1.A.0.435 build was released, that was to UAE it had no Market so I made a xRecovery fix package to get Android Market on it.
But would suggest you to flash another region firmware instead of this, because then when you flash with SEUS or PCC again in the future you would miss Android Market again.
You can find the latest firmwares here (don't use the AT&T but go for the one below called 2.1.B.0.1)
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Sony Ericsson said:
The Android Market is not supported in the UAE. This is due to the fact that Google has not had the necessary agreements with the Regulatory bodies as yet. This is fully controlled and managed by Google. Sony Ericsson will be offering Slide Me which is an alternative to Android market in the UAE.
Click to expand...
Click to collapse
PlayGunsta said:
Back up and restore could be fine if it does backup everything you want.
Debranding means that your phone is not LIMITED to one provider with software updates. So when SE releases a firmware you will have to wait till your provider releases the firmware for you. But when you debrand you get updates from SE and not your provider.
Click to expand...
Click to collapse
So,should i just flash my phone or debrand it too?
arkedk said:
Android Market isn't available in the UAE region.
So if you debrand it and get market, and still using a SIM from the UAE I think it would block any content. But then you could root your phone and use Market Enabler to fake another carrier and get Android Market to work.
But since you "brought it home" I can say that reflashing it to another region will get you Android Market and it will work. You don't need to back up your UAE firmware when replacing it with another region firmware, and after you've flashed it with another region firmware SEUS or PCC will always flash to that region firmware.
If you flash to another region you won't have SlideMe Market, because the all other region firmwares all have access to Android Market and therefor comes with Android Market pre-installed instead.
I remember when the first 2.1.A.0.435 build was released, that was to UAE it had no Market so I made a xRecovery fix package to get Android Market on it.
But would suggest you to flash another region firmware instead of this, because then when you flash with SEUS or PCC again in the future you would miss Android Market again.
You can find the latest firmwares here (don't use the AT&T but go for the one below 2.1.B.0.1)
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Click to expand...
Click to collapse
Thank you so much!!!....i live in india
So, i can just flash(no need to debrand) to other region without worrying rite?
evilmonk69 said:
So,should i just flash my phone or debrand it too?
Click to expand...
Click to collapse
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
PlayGunsta said:
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
Click to expand...
Click to collapse
He is on Generic firmware just so you know.
It's just Generic firmware that does not contain Android Market.
PlayGunsta said:
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
Click to expand...
Click to collapse
sorry for being such a pain in the arse...but one last question
which generic firmware do u suggest?
evilmonk69 said:
sorry for being such a pain in the arse...but one last question
which generic firmware do u suggest?
Click to expand...
Click to collapse
You're not a pain in the arse. Some people are just immature.
As said before 2.1.B.0.1 is the latest.
http://forum.xda-developers.com/showthread.php?t=936733
Direct Download:
http://www.multiupload.com/3GT0KKFMXP
arkedk said:
You're not a pain in the arse. Some people are just immature.
As said before 2.1.B.0.1 is the latest.
http://forum.xda-developers.com/showthread.php?t=936733
Direct Download:
http://www.multiupload.com/3GT0KKFMXP
Click to expand...
Click to collapse
Thank you..thank you ...thank you!!!!
I'm watching this , chill out.
does 2.1.B.0.1include DT?
thanx for 2.1.B.0.1.It works great...
Just wondering does 2.1.B.0.1 have Dual touch
I am trying to unlock my x10a locked to ATT, I purchased the unlocking code but it seems that mi unlocking code cannot be found on the unlocking server.
They offered me the unlocking software which requires to be running android 2.1.
So the deal is that I don’t know what is the version that the cel is running, I will think is not 2.1, but I don’t know how to tell, so how can I update the cel to android 2.1 on a locked phone.
BTW I don’t have any ATT sim
PLS help!!!
flashtool will probably still work!
urenajoseluis said:
I am trying to unlock my x10a locked to ATT, I purchased the unlocking code but it seems that mi unlocking code cannot be found on the unlocking server.
They offered me the unlocking software which requires to be running android 2.1.
So the deal is that I don’t know what is the version that the cel is running, I will think is not 2.1, but I don’t know how to tell, so how can I update the cel to android 2.1 on a locked phone.
BTW I don’t have any ATT sim
PLS help!!!
Click to expand...
Click to collapse
Does your lockscreen have and arc you have to swipe or a straight line at the bottom to unlock (like iPhone)?
If you have the arc swipe to leave lockscreen then you're on 1.6.
If you got the straight swipe line, then your on 2.1.
You can check your Android version by going to:
Settings>About Phone
And check what it says in the Firmware version field.
Yes I have the Arc so I'm on 1.6
I can't go to setting I can only do an emergency call.
urenajoseluis said:
Yes I have the Arc so I'm on 1.6
I can't go to setting I can only do an emergency call.
Click to expand...
Click to collapse
Ahh yea the AT&T restrictions. Forgot about those, on generic firmwares you can boot up without a SIM in the phone.
Well you just have to flash a generic X10a firmware with FlashTool then.
To be safe get the X10a (2.0.A.0.504) firmware.
Not confirmed this myself, but I think going from 1.6 to 2.1 requires you initially flash 2.0.A.0.504 before any other 2.1 firmware (But I'm really not certain about this, so this is just a safety precaution on my part).
This can all be found in the FlashTool thread here:
http://forum.xda-developers.com/showthread.php?t=920746
Then just flash that and then you'll be ready for your cable unlock.
Is there a matrix of FW releases??
urenajoseluis said:
Is there a matrix of FW releases??
Click to expand...
Click to collapse
Yea there is a lot, but if you checked my link you would see there is only 3 generic firmwares for each device (X10i & X10a) in the link.
ok arkedk thanks for the help, will download that and check if it helps.
Why flash old 2.0.A.0.504 firmware without dualtouch?
Here's a step by step guide for AT&T X10a users to update to the most recent global generic 2.1.A.0.435 firmware, which has dualtouch and will be certain to get the official 2.3.3 Gingerbread update directly from SE when available.
http://forum.xda-developers.com/showthread.php?t=1012380
agentJBM said:
Why flash old 2.0.A.0.504 firmware without dualtouch?
Here's a step by step guide for AT&T X10a users to update to the most recent global generic 2.1.A.0.435 firmware, which has dualtouch and will be certain to get the official 2.3.3 Gingerbread update directly from SE when available.
http://forum.xda-developers.com/showthread.php?t=1012380
Click to expand...
Click to collapse
Told him to flash that because I remember someone long ago said that going from 1.6 to the latest 2.1 could cause problems. But was not certain on that so better safe than sorry. And either way he will be able to get 2.3 on 2.0.A.0.504 just aswell as on 2.1.A.0.435. This was just so he could get the device unlocked in the safest possible way I could recommend. He can always just connect the X10 to SEUS after he has unlocked, and then it will update him to the latest 2.1.A.0.435
Sent from my X10i using Tapatalk
On x10unlocked.com it says that I shouldn't have a custom firmware installed.
That's the software the company provided me with.
Please advice
Am i missing something here, but wont pc companion or seus put everyone on the latest official 2.1 version from se with no problems
Then he can unlock easy with flashtool.
Edit
So, download seus or pc companion from se website, instal and follow the instructions. You don't even have to be able to turn the phone on for it to work
Sent from my X10i using XDA App
gregbradley said:
Am i missing something here, but wont pc companion or seus put everyone on the latest official 2.1 version from se with no problems
Then he can unlock easy with flashtool.
Edit
So, download seus or pc companion from se website, instal and follow the instructions. You don't even have to be able to turn the phone on for it to work
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Not any kit. If you want the bloatware branded ATT 2.1 firmware that limits data speeds and blocks apps from unknown sources. Also, most branded kits will not be getting the Gingerbread update.
What i seem to think his problem is is that he cant unlock on SETool because he is on 1.6 and that only works with stock 2.1
So he needs 2.1 on his phone which he is struggling with.
So, use official means to upgrade to the official 2.1, unlock using SETool, then use flashtool to root, install recovery and flash any firmware or custom rom he wants.
Why the worry about dual touch drivers etc etc.....once its rooted you can get rid of bloatware, easily flash generic firmware and receive 2.3 update....
I am confused as to why this poses a problem.
agentJBM said:
Not any kit. If you want the bloatware branded ATT 2.1 firmware that limits data speeds and blocks apps from unknown sources. Also, most branded kits will not be getting the Gingerbread update.
Click to expand...
Click to collapse
gregbradley said:
What i seem to think his problem is is that he cant unlock on SETool because he is on 1.6 and that only works with stock 2.1
So he needs 2.1 on his phone which he is struggling with.
So, use official means to upgrade to the official 2.1, unlock using SETool, then use flashtool to root, install recovery and flash any firmware or custom rom he wants.
Why the worry about dual touch drivers etc etc.....once its rooted you can get rid of bloatware, easily flash generic firmware and receive 2.3 update....
I am confused as to why this poses a problem.
Click to expand...
Click to collapse
Enabling apps from unknown sources isn't as easy as rooting with ATT. Also, data is throttled down to 3G.
You even suggest flashing generic after updating via SEUS or PCC. Why add all these extra steps? This is xda. You can accomplish everything with global generic 2.1.A.0.435 firmware in about 5 minutes with the flash tool.
Well What I did was use Sony Ericsson Update Service, when I connected the phone it told me that there is a newer version so it updated it to firmware version 2.1-update1. So I was able to unlock the phone using multi unlock. Now to get the latest firmware which I understood it is 2.1.A.0.435 with Flash Tool.
Can I go straight from 2.1-update1 to 2.1.A.0.435?
And a last question a generic firmware means that I won’t have all those useless ATT apps on my phone?
Thanks for the help
urenajoseluis said:
Well What I did was use Sony Ericsson Update Service, when I connected the phone it told me that there is a newer version so it updated it to firmware version 2.1-update1. So I was able to unlock the phone using multi unlock. Now to get the latest firmware which I understood it is 2.1.A.0.435 with Flash Tool.
Can I go straight from 2.1-update1 to 2.1.A.0.435?
And a last question a generic firmware means that I won’t have all those useless ATT apps on my phone?
Thanks for the help
Click to expand...
Click to collapse
Yea a generic firmware is one without any branded apps, special setup or limited features.
The latest generic was released for the German generic kits an has build version 2.1.B.0.1. You can find it in my signature.
What do you mean by German generic kits?
I apologize to be a pain but I just getting in the android world.
urenajoseluis said:
What do you mean by German generic kits?
I apologize to be a pain but I just getting in the android world.
Click to expand...
Click to collapse
All Sony Ericsson devices is sold in different regions and has a region specific code. That code determines if your region is eligible for an update (Sony Ericsson rolls out their updates in regions).
Some regions gets updates that others don't get, that's the case with the 2.1.B.0.1, this firmware was only released to the German "kits".
Not a pain at all, we all have to start somewhere
Ok then I will go to 2.1.B.0.1, hopefully I won’t screw up my phone since this is the first time doing this
I have xperia x8 with cyanogenmod 7 rom and free xperia project bootloader installed
I want to update my baseband...right now the phone shows unknown baseband...
wil connecting my phone to seus update the baseband???
or will it brick my phone???
if it will brick then please tell me a way to update baseband
i jus checked again...and sometimes it shows unknown and sometimes it shows the latest baseband(m76xx-tsncjolym-53404015)...but when i try to install a rom with cwm it always shows update the base band to m76xx-tsncjolym-53404015
but i have the same base band...what do i do??
I never try using SEUS but flashtool always do the job... just download ganeric 2.1 ROM then using flash tool to flash the ROM. You will save your bandwith...
Sent from Shakira run on CM Nightlies and FXP030 Kernel
What ? Seus will never brick it , it will repair it always use if my phone dont boot and can't enter xRecovery xD
Sent from my E15i using Tapatalk
thanx...
can you plz provide me with a link of the latest SEUS for xperia x8(w8)
maybe only if u disconnect ur cable during the flash
http://dl-www.sonyericsson.com/cws/download/1/110/61/1317636927/Update_Service_Setup-2.11.10.7.exe
little change
on the link posted by wc_how change the ericsson in the link to mobile, as we know in 2012 Ericsson is nowhere tho be found. such a waste, i like the Sony Ericsson current name and font rather than the new Sony Mobile, but what can i do.....
I am new here in this forum but i was also facing problem with root accedently i update my arc from 0.42 to 0.62 and i lost my root. Now yesterday rooted my arc and my phone once again awsome.....I want to share how i did it and this happened with the help of comments in this forum and moders and developer who develop the mods for arc. Its not my work just share.
(1) MAke backup of your market appliction with titanium backup.
(2) Download 4.0.2.A.0.42 from ( jlmcr87 posted the link )
(3) Flash this firmware with any version of flastool i did this with 0.2.9 & 0.6.8
(4) After flashing the firmware root xperia arc with the methood of ( zergRUSH any version ) i root with the ( zergRUSH version 1 & 3).
(5) After that immediately connect your phone with wireless network and check for update. Its display that new version is availabe 4.0.2.A.0.62. Click to update
After update click to install. IT will take time and your phone start several time dont worry about it. After completing update first boot take time.
(6) To Check root install CWM autoinstaller or Titanium backup. Have fun
hi
thanks man i was serching for root about 3 days ago and found nothing
please could u please post the url of the tools that you use it here
because i didnt know from where can i get these URLs
u said { Download 4.0.2.A.0.42 from ( jlmcr87 posted the link ) }
where does jlmcr87 post the link ??
please post it here asap..
thanks man
i found it and finally rooted my arc
you r awesome
link
(1) for 4.0.2.A.0.42 is ( ://uploaded.to/file/vmfu4czg )
(2) And for flash tool ( ://ul.to/w076p5wf )
Plz put http berfore the link
original link is posted by ( jlmcr87 ) i am just paste here to the help of other users like me.
So please put ( http ) before the link i pasted above.
Happy to hear it works for you. It doesn't work for me. When I try to update via OTA, the phone starts updating, does a few reboots and when you think it is done it shows a message "Could not install new software version. Try again"
which firmware you flashed on your arc. i pasred a link of 0.42 download and flash it. it worked 100% i have done this on 7 xperia arc sets. all sets work perfectly working awsome. Try one more time with step by step it will definately work
Error
Could not install new software version. Try again.
Xperia Arc s
Good work Atif. And thanks for the steps shown. Many new users were asking for that.
Hello guys i have xperia mini wih 4.0.2.A.0.62 can i root it with the method you said?? I ask because everyone tells for arc only
thanks Alex
alexandros050 said:
Hello guys i have xperia mini wih 4.0.2.A.0.62 can i root it with the method you said?? I ask because everyone tells for arc only
thanks Alex
Click to expand...
Click to collapse
Any ideas on above ?
can it flash ARC S too ? (LT18i )
JJD809 said:
Happy to hear it works for you. It doesn't work for me. When I try to update via OTA, the phone starts updating, does a few reboots and when you think it is done it shows a message "Could not install new software version. Try again"
Click to expand...
Click to collapse
Same for me - tried 3+ times now.
This post seems to suggest the update is no longer available with ICS so close, but in that case I'd have thought it would fail earlier - the download seems to work fine; it's the install that fails.
43
ya.. but i can root ...
i have firmware 42 . i rooted with zergrush,then i deleted some bloatware previously..
so i have retored the stuff that i deleted from system/app..
then i update over air for .62 i download. after that phone rebooted.. then within the second it told me that "update failed" for .62 firmware ...!!
plz help to correct me
As in my second post i told download 0.42 firmware from this link( ://uploaded.to/file/vmfu4czg ) then flash it and then root it. Then update it through wifi. Today i try it on xperia s (LT18i) and i ts working perfectly i did not face any problem.
try flashing 0.42 Generic Global and then do all the procedure
Srry for lazy in translating, i have some more detail (including picture to demonstrate) in this link
Hope this can help
If you want to update OTA from .42 to .62, don't change anything in the system files. Update to .62 OTA first, then do whatever you want to your phone.
Hi there Got the same problem. I was always using Zergrush method for root. When I got .62 firmware it wont work. (fails in console while rooting). You said that we must flash .42 firmware then root, then update via OTA, but I got relocked bootloader. Can it brick my phone?
Not with locked bootloader.
Only use ota with locked bootloader
Sent from my LT15i using XDA App
Yes, but my friend got xperia play. After unlocking bootloader he locked it with THIS
method. Then he start updating via OTA and get his phone bricked.
I got locked bootloader with the same method.
Hi everybody,
I'm new here, I have bought my first sony (used) but I notice that the LTE signal is so poor specially indoor. The seller hasn't saw me that the firmware is an UK fw also I live in italy, infact, after a little research, I noticed that there is a carrier's app called EE and the fw version installed is of EE carrier's. The phone is sim unlock. There isn't root and I haven't unlook the bootloader.
My questions are:
- Can I change the stock uk firmware putting in an Italian stock firmware?
- Can I change it without root and without unlook the bootloader?
- How?
- Is there a guide that I can follow?
- Can I change the CSC for preserve the ota upgrade? How? I'd like to change fw preserving OTA update.
I don't wanna unlock the bootloader and root the phone cause I don't want lose the DRM licenses (widevine specially). I'm not interested to rooting or make any modding.
I'd like to put a stock room without bloat apps and with a strong lte signal.
Here the Info about the phone:
F8331
Android 8.0
Phone Software Version: 1302-9157_41.3.A.2.171
Global-LTE3A
Generic-41.3.a.2.171
S1 Boot version: 1299-4832 S1_BOOT_MSM8996_LA2.0_O_204
BASEBAND: 8996-8996.gwn.prodQ-00070-40
Customization version: 1305-7307R8E
Codes phone for CSC doesn't work.
Thanks y for the support
P.s.
Here a link to some pics about the phone:
4shared.com/s/dipBSZcFc
I think it should be possible to just Flash another Regions Firmware via Androxydes Flashtool.
No need for unlock as long as u have any offical fw (XperiFirm comes with Flashtool and downloads offical files)
But I may be wrong tho, this just came to my mind in the first moment
LoaderFabi said:
I think it should be possible to just Flash another Regions Firmware via Androxydes Flashtool.
No need for unlock as long as u have any offical fw (XperiFirm comes with Flashtool and downloads offical files)
But I may be wrong tho, this just came to my mind in the first moment
Click to expand...
Click to collapse
Thanks you LoaderFabi for the suggest, so I will waiting for a confirmation about that.
Meanwhile can y tell me a link to a guide and download the tool?
Anyway, thanks again ?
You can flash any region's firmware without unlocking the bootloader. You need Xperifirm to download the firmware, and Flashtool to flash it.
Kuarinfou said:
You can flash any region's firmware without unlocking the bootloader. You need Xperifirm to download the firmware, and Flashtool to flash it.
Click to expand...
Click to collapse
Ok, and about the OTA's update? Will it be automatically? Or do I have something about? And how?
Can you link me a guide to flash the fw and, eventually, to do something about OTA's update?
Thanks
Sean_Droid said:
Ok, and about the OTA's update? Will it be automatically? Or do I have something about? And how?
Can you link me a guide to flash the fw and, eventually, to do something about OTA's update?
Thanks
Click to expand...
Click to collapse
Since it's an official firmware, you always get updates OTA (i think XZ will no longer get updates but no need to worry). I didn't see any guide to flash, i'll probably today write a guide to flash firmwares.
Kuarinfou said:
Since it's an official firmware, you always get updates OTA (i think XZ will no longer get updates but no need to worry). I didn't see any guide to flash, i'll probably today write a guide to flash firmwares.
Click to expand...
Click to collapse
Thanks y so much Kuarinfou, I will waiting for your guide. I don't remember where I red in this forum about the CSC and that it could not change also flashing a stock fw bringing the OTA's issue... Probably I remember wrong ?
Anyway, Quote me when you will do it.
Sean_Droid said:
Thanks y so much Kuarinfou, I will waiting for your guide. I don't remember where I red in this forum about the CSC and that it could not change also flashing a stock fw bringing the OTA's issue... Probably I remember wrong
Anyway, Quote me when you will do it.
Click to expand...
Click to collapse
https://forum.xda-developers.com/xperia-xz/how-to/guide-flashing-firmware-xperia-phones-t3860048
Kuarinfou said:
https://forum.xda-developers.com/xperia-xz/how-to/guide-flashing-firmware-xperia-phones-t3860048
Click to expand...
Click to collapse
Thanks you so much ?