will seus brick my phone - XPERIA X8 General

I have xperia x8 with cyanogenmod 7 rom and free xperia project bootloader installed
I want to update my baseband...right now the phone shows unknown baseband...
wil connecting my phone to seus update the baseband???
or will it brick my phone???
if it will brick then please tell me a way to update baseband
i jus checked again...and sometimes it shows unknown and sometimes it shows the latest baseband(m76xx-tsncjolym-53404015)...but when i try to install a rom with cwm it always shows update the base band to m76xx-tsncjolym-53404015
but i have the same base band...what do i do??

I never try using SEUS but flashtool always do the job... just download ganeric 2.1 ROM then using flash tool to flash the ROM. You will save your bandwith...
Sent from Shakira run on CM Nightlies and FXP030 Kernel

What ? Seus will never brick it , it will repair it always use if my phone dont boot and can't enter xRecovery xD
Sent from my E15i using Tapatalk

thanx...
can you plz provide me with a link of the latest SEUS for xperia x8(w8)

maybe only if u disconnect ur cable during the flash

http://dl-www.sonyericsson.com/cws/download/1/110/61/1317636927/Update_Service_Setup-2.11.10.7.exe

little change
on the link posted by wc_how change the ericsson in the link to mobile, as we know in 2012 Ericsson is nowhere tho be found. such a waste, i like the Sony Ericsson current name and font rather than the new Sony Mobile, but what can i do.....

Related

2.0.1.A.0.47 not 2.1.1.A.0.6

I have problem(question?). When i bought a xperia x8 i got 2.1.1.A.0.6 and after flash it was 2.1.1.A.0.16(i checked it only 2 times but i remember it). But I was interesed custom roms. So i decided to install xrecovery. I did a backup of orginal system and install custom rom. All was ok. But last time I wanted to check something in official system(so i restore)and I saw that i have 2.0.1.A.0.47. And here is my question: Why i have this version?? Is there any differences??
Try to flash it again with SEUS or flash the baseband with the flashtool.
Hope I'm right
(sry for the bad english)
Other ideas?? Why i have something like this?? Is there and diffrence??
Just update it on SEUS (Sony Ericsson Update Software), on PC Companion.

x10i Can I install the Modified 2.3.3 ROMs available out there?

Title says all
Can I upgrade my x10i or should I wait
do it the flashtool by jarpalea, or do it wb rom very fast and stable.
But won't the baseband mess up and my phone get no signal?

[Q] Stock ROM for SIM UNLOCK Purpose

Hi,
I have an X8 E15a. It's rooted with custom firmware and custom rom.
The problem is that it is SIM locked...
I have read that all SIM UNLOCK software require STOCK 2.1 roms. Is it true?
1-.So, how can I go back to stock rom? Is there and custom recoverye flashable stock?
2-.Is there any way to sim unlock (besides of course contact my local carrier and ask for it).
Best Regards.
1. You an flash it, with SEUS or PC Companion, you can download them from SE's web page, or yo can flash it with FlashTool (Easiest way: SEUS or PCC)
2. You can unlock your phone on different webpages, where you pay, and they give you instructions for unlocking your phone
her3814 said:
1. You an flash it, with SEUS or PC Companion, you can download them from SE's web page, or yo can flash it with FlashTool (Easiest way: SEUS or PCC)
2. You can unlock your phone on different webpages, where you pay, and they give you instructions for unlocking your phone
Click to expand...
Click to collapse
PC Companions says "There is no Software Available Try Later"...
SEUS says "No Updates Available"
Dont go to updqte software go to repair!
Sent from my Shakira using XDA App
dsaklein said:
Dont go to updqte software go to repair!
Sent from my Shakira using XDA App
Click to expand...
Click to collapse
Same thing with repair...
check ur baseband, for some solutions is baseband match required
This is so weird...
I'm using FLASHTOOL using this guide:
http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
I flashed this rom:
SE x8_2.1_rus.ftf
Which is 2.1 right? Well... now it's on Android 1.6.
I said "hey maybe I made a mistake..." and downloaded from this page:
http://forum.xda-developers.com/showthread.php?t=875688
This file:
E15a android 2.1.1 SI 1243-9502 Sony
So... following this page:
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
I made an FTF file with it... and flashed it.
To my surprise I am still on Android 1.6 also BASEBAND shows UNKONWN.
SEUS and PCC still shows NO UPDATE for my phone, even using REPAIR.
Please, I need help with it.
So I flashed baseband for E15A from this page:
http://forum.xda-developers.com/showthread.php?t=976538
But now my phone is stuck on Sony Ericsson logo... not even Android 1.6
When I try to flash a "made by me" FTF file it gives me a;
28/018/2011 19:18:58 - ERROR - Error flashing. Aborted
I can only flash: SE x8_2.1_rus.ftf which is for 15i i think...
It seems that the problem is that I flashed a FTF for a 15i and now I'm stucked in Android 1.6 and can't do anything...
UPDATE:
Now I'm on this rom: X8 Shakira E15i_2.1.1.A.0.6_generic.ftf
And flashed this baseband: Baseband 015 - kernel 2.1.1.A.0.6
Do you think it's OK for unlocking?
UPDATE2:
UNLOCKED WORKED FINE WITH: X8 Shakira E15i_2.1.1.A.0.6_generic.ftf
I used a software called: Multi Unlock CLient
Best Regards.
That´s free, isn´t it?
So that means, we can unlock for free?
Because I´ve found a download link for that software, so I can get it for free/it´s really free.
And another question:
Will does be compatible with unlocked bootloader?
codfreak said:
That´s free, isn´t it?
So that means, we can unlock for free?
Because I´ve found a download link for that software, so I can get it for free/it´s really free.
And another question:
Will does be compatible with unlocked bootloader?
Click to expand...
Click to collapse
No, it's not free.
For unlocking purposes you need a USERNAME and PASSWORD.
I did not tried UNLOCKED bootloader as it says that it might "relock" your phone.

Root xperia arc 4.0.2.A.0.62 with locked boot loader

I am new here in this forum but i was also facing problem with root accedently i update my arc from 0.42 to 0.62 and i lost my root. Now yesterday rooted my arc and my phone once again awsome.....I want to share how i did it and this happened with the help of comments in this forum and moders and developer who develop the mods for arc. Its not my work just share.
(1) MAke backup of your market appliction with titanium backup.
(2) Download 4.0.2.A.0.42 from ( jlmcr87 posted the link )
(3) Flash this firmware with any version of flastool i did this with 0.2.9 & 0.6.8
(4) After flashing the firmware root xperia arc with the methood of ( zergRUSH any version ) i root with the ( zergRUSH version 1 & 3).
(5) After that immediately connect your phone with wireless network and check for update. Its display that new version is availabe 4.0.2.A.0.62. Click to update
After update click to install. IT will take time and your phone start several time dont worry about it. After completing update first boot take time.
(6) To Check root install CWM autoinstaller or Titanium backup. Have fun
hi
thanks man i was serching for root about 3 days ago and found nothing
please could u please post the url of the tools that you use it here
because i didnt know from where can i get these URLs
u said { Download 4.0.2.A.0.42 from ( jlmcr87 posted the link ) }
where does jlmcr87 post the link ??
please post it here asap..
thanks man
i found it and finally rooted my arc
you r awesome
link
(1) for 4.0.2.A.0.42 is ( ://uploaded.to/file/vmfu4czg )
(2) And for flash tool ( ://ul.to/w076p5wf )
Plz put http berfore the link
original link is posted by ( jlmcr87 ) i am just paste here to the help of other users like me.
So please put ( http ) before the link i pasted above.
Happy to hear it works for you. It doesn't work for me. When I try to update via OTA, the phone starts updating, does a few reboots and when you think it is done it shows a message "Could not install new software version. Try again"
which firmware you flashed on your arc. i pasred a link of 0.42 download and flash it. it worked 100% i have done this on 7 xperia arc sets. all sets work perfectly working awsome. Try one more time with step by step it will definately work
Error
Could not install new software version. Try again.
Xperia Arc s
Good work Atif. And thanks for the steps shown. Many new users were asking for that.
Hello guys i have xperia mini wih 4.0.2.A.0.62 can i root it with the method you said?? I ask because everyone tells for arc only
thanks Alex
alexandros050 said:
Hello guys i have xperia mini wih 4.0.2.A.0.62 can i root it with the method you said?? I ask because everyone tells for arc only
thanks Alex
Click to expand...
Click to collapse
Any ideas on above ?
can it flash ARC S too ? (LT18i )
JJD809 said:
Happy to hear it works for you. It doesn't work for me. When I try to update via OTA, the phone starts updating, does a few reboots and when you think it is done it shows a message "Could not install new software version. Try again"
Click to expand...
Click to collapse
Same for me - tried 3+ times now.
This post seems to suggest the update is no longer available with ICS so close, but in that case I'd have thought it would fail earlier - the download seems to work fine; it's the install that fails.
43
ya.. but i can root ...
i have firmware 42 . i rooted with zergrush,then i deleted some bloatware previously..
so i have retored the stuff that i deleted from system/app..
then i update over air for .62 i download. after that phone rebooted.. then within the second it told me that "update failed" for .62 firmware ...!!
plz help to correct me
As in my second post i told download 0.42 firmware from this link( ://uploaded.to/file/vmfu4czg ) then flash it and then root it. Then update it through wifi. Today i try it on xperia s (LT18i) and i ts working perfectly i did not face any problem.
try flashing 0.42 Generic Global and then do all the procedure
Srry for lazy in translating, i have some more detail (including picture to demonstrate) in this link
Hope this can help
If you want to update OTA from .42 to .62, don't change anything in the system files. Update to .62 OTA first, then do whatever you want to your phone.
Hi there Got the same problem. I was always using Zergrush method for root. When I got .62 firmware it wont work. (fails in console while rooting). You said that we must flash .42 firmware then root, then update via OTA, but I got relocked bootloader. Can it brick my phone?
Not with locked bootloader.
Only use ota with locked bootloader
Sent from my LT15i using XDA App
Yes, but my friend got xperia play. After unlocking bootloader he locked it with THIS
method. Then he start updating via OTA and get his phone bricked.
I got locked bootloader with the same method.

Xperia X10 won't boot up after flashing x10s rom on locked bootloader

I don't kow why but I followed the instructions to install on the locked bootloader.After bootup,it just stuck on the SE logo but xRecovery still works.Any solutions?
??
c903jerk said:
I don't kow why but I followed the instructions to install on the locked bootloader.After bootup,it just stuck on the SE logo but xRecovery still works.Any solutions?
Click to expand...
Click to collapse
Hello,
May i ask your previous ROM/Kernel/Baseband was? Was the Android OS 2.3.3 Rooted Gingerbread? Probably something to do with your previous installed thingy.
When i was installing x10S before, i'm doing this after my Stock ROM 2.3.3GB(baseband 71 and buildversion 3.0.1.G.0.75) in x10:
1)Xrecovery
2)FullWipe (Factory Reset)
3)Clear Cache Partition
4)Install Custom Zip from sdcard (Champ-Tof37-X10S-V8-2-Main.zip)
5)Started automatically (COPY DELETE Files,SYSTEM and etc.) and ''Installed Successfully''
6)Reboot Phone. (Updates Not Installed together.)
7)Sony Ericsson Logo then new XPERIA Logo and after 2-3minutes... Finally, Setup Guide.
Sincerely,
Whitefang
If this helps, pls kindly hit ''Thanks'' Button
whitefang3456 said:
Hello,
May i ask your previous ROM/Kernel/Baseband was? Was the Android OS 2.3.3 Rooted Gingerbread? Probably something to do with your previous installed thingy.
When i was installing x10S before, i'm doing this after my Stock ROM 2.3.3.
1)Xrecovery
2)FullWipe (Factory Reset)
3)Clear Cache Partition
4)Install Custom Zip from sdcard (Champ-Tof37-X10S-V8-2-Main.zip)
5)Started automatically (COPY DELETE Files,SYSTEM and etc.) and ''Installed Successfully''
6)Reboot Phone
7)Sony Ericsson Logo then new XPERIA Logo and after 2-3minutes... Finally, Setup Guide.
Sincerely,
Whitefang
Click to expand...
Click to collapse
I started frm AT&T Android 2.1(On purpose)because I have trouble rooting Android 2.3.3.But I've been waiting for 10 minutes.The kernel is stock kernel and baseband 2.1.54
Oh
c903jerk said:
I started frm AT&T Android 2.1(On purpose)because I have trouble rooting Android 2.3.3.But I've been waiting for 10 minutes.The kernel is stock kernel and baseband 2.1.54
Click to expand...
Click to collapse
Ah I see some differences. Perhaps x10S rom works for baseband 71, instead of your 54.
Extra:
Maybe you should restore to ur 2.1 ROM and visit SE official website for official 2.3.3 update through SONY PC COMPANION [MAKE SURE U BACKUP UR IMPORTANT FILES ALRIGHT ].
Even you didn't backup ur ROM, you may check SE website to for REPAIRING Your Phone Follow guide below:
http://forum.xda-developers.com/showthread.php?t=1504809
Then visit thread below for ROOTING OFFICIAL Gingerbread 2.3.3 for x10 Your Updated Baseband shd be 71, and Buildversion 3.0.1.G.0.75 in your updated x10.
http://forum.xda-developers.com/showthread.php?t=1196808 (Watch the tutorial video for ensuring your steps are precise)
It shd be fixed.
Sincerely,
Whitefang
Pls kindly Hit "Thanks" Button if this reply is helpful or convinces you
have you tried wiping dalvik?
whitefang3456 said:
Ah I see some differences. Perhaps x10S rom works for baseband 71, instead of your 54.
Extra:
Maybe you should restore to ur 2.1 ROM and visit SE official website for official 2.3.3 update through SONY PC COMPANION [MAKE SURE U BACKUP UR IMPORTANT FILES ALRIGHT ].
Even you didn't backup ur ROM, you may check SE website to for REPAIRING Your Phone Follow guide below:
http://forum.xda-developers.com/showthread.php?t=1504809
Then visit thread below for ROOTING OFFICIAL Gingerbread 2.3.3 for x10 Your Updated Baseband shd be 71, and Buildversion 3.0.1.G.0.75 in your updated x10.
http://forum.xda-developers.com/showthread.php?t=1196808 (Watch the tutorial video for ensuring your steps are precise)
It shd be fixed.
Sincerely,
Whitefang
Pls kindly Hit "Thanks" Button if this reply is helpful or convinces you
Click to expand...
Click to collapse
I'll try agiain tonight with a generic 2.1(Not AT&T) with 71 baseband.
c903jerk said:
I'll try agiain tonight with a generic 2.1(Not AT&T) with 71 baseband.
Click to expand...
Click to collapse
You can also try posting your Questions in Q&A...

Categories

Resources