[Q] HTC HD2 Stuck On "GO GO GO!" cwm. - HD2 Android Q&A, Help & Troubleshooting and Genera

Okay, basicly let me explain what heppend yessterday:
I dropped my phone on the screen from like 15 cm, on wooden floor, but badly it fall on the screen. Then i wannted to see if the phone is ok, i turned it on and then tried slide the unlock, but basicly what heppend is the touchscreen didnt work. Then it turned off (the screen) but when i press button, it still lighted. So i tought, if i would press the resset button and boot it agian all will be fine.. But i booted it, and the magldr just did it work, it tryed boot it to android i had TyphooN Cyanogen Mod, but sadly it didnt boot. It just at the "Go go go!" part. I was like what the **** are you kidding me, so i did agian and no luck. So i contacted my friend that has hd2 and knows about these stuff. He just told me to do task 29, that didnt work so i downloaded the toolkit, but it didnt work too, i formatted, this time i tryed install cwm freshly, just to install my typhoon agian right, so my friend told me to go to the ad recovery, and just install it from zip.. it stuck at go go go agian. Now i really dont frking know what heppend, i tryed taking battery out, as my friend said - no luck. Is there anything else i can do, or my hd2 is totally died

i will donate if someone will seriously help me!

format your sd with panasonic sd formatter. then make task29-flash mgldr-flash radio-flash cwr and flash rom. if not boot then change rom to another one.

In cwm perform a "wipe data / factory reset"
This will clear the system folders on the ext and fat partitions of the SD card, and the data on the nand. Sometimes a rom wont boot if there are leftovers in those folders.

i cant even go on cwm...

well thx, ill try it anyway, with help of my friend

TotalErikas said:
i cant even go on cwm...
Click to expand...
Click to collapse
if you cant goin to CWM,
when you at MAGLDR menu
you Choose USB Flasher
(must use Volume down/Volume up button, then press Call button)
(if the buttons cant, you must sent it to repair...)
and connet it to pc to re-flash any new CWM...

i reflashed cwm hundred of times, i also formatted the whole phone and that didnt work
and buttons did work

TotalErikas said:
i reflashed cwm hundred of times, i also formatted the whole phone and that didnt work
and buttons did work
Click to expand...
Click to collapse
Any luck with your issue TotalErikas? I had the same problem, I didn't drop my phone, but somehow screen just froze when I turn on from sleep and I thought restarting solves the issue then..... stuck on go!go!go! screen... tried task 29, flash rom, flash magldr, flash recovery, flash cLK... nothing works... I really hope it's not hardware issue... I already paid loads to replace screen twice.... Please share if you have any luck with yours! thanks~

I just fixed mine. The problem is not any how with screen or something. Its all about battery contact, remove the battery and push those three things that gives contact, to boot the screen and stuf..

Related

[Solved] Phone cannot flash anything, cannot hard reset!

Sorry for the long description but I think it is better to explain the whole story:
A few days ago I decided to HSPL my HD2 and installed Miri rom. All is working well until today when I need to hard reset the phone. Pressing the two volume keys just did not hard reset it, it just go straight to boot up as normal. The only way to hard reset is to use the Clear Storage.
I thought something has gone wrong so decided to go back to stock rom. So I put the stock Telstra Rom onto the SD card and renaming it to "leoimg.nbh". Then press down volume key and power. It started to show "Loading" but then went back to the boot loader screen. I tried many times and it didn't work. Eventually it worked and succesfully restored to stock rom with SPL 1.42.0000.
I tried the hard reset using volume keys and it is still not working. I then tried to use active sync to install the original stock rom from computer but that failed. (I noticed it did not recognize the version installed on the phone).
I then tried HardSPL again and although it says successful, the boot loader version keeps saying 1.42.0000.
Now I am stuck with the stock rom and cannot flash anything onto it, including stock rom. I suspect this is a hardware problem? Anyone has any suggestion.
I think you messed up with the SD card. I'll say it loud: DON'T EVER AGAIN FLASH FROM THE SD CARD. Now, you may try the HSPL 2, according to the base of your stock rom. For further information, go there. And don't forget: don't ever again... you already know.
Problem is HSPL2 does not work with Telstra phone...
Ok. It was my error. I tried to flash the HD rom instead of the HD2 rom!
Luckily nothing is broken! I now successfully restored to stock rom with SPL1.42 and is able to install HSPL. I can now start flashing Yeepee!!
However, There is still the problem with the hard reset where I can't do it with the volume keys????
forumx said:
Ok. It was my error. I tried to flash the HD rom instead of the HD2 rom!
Luckily nothing is broken! I now successfully restored to stock rom with SPL1.42 and is able to install HSPL. I can now start flashing Yeepee!!
However, There is still the problem with the hard reset where I can't do it with the volume keys????
Click to expand...
Click to collapse
Well.. If the device is up and running there is an "Wipe device" Option under "settings" --> "All settings". It is pretty much the same
I knew there is a "Clear Storage" option but I am just concern that it is a hardware problem. I have tried both stock and custom ROMS, with and without HSPL and it is still not working??
forumx said:
However, There is still the problem with the hard reset where I can't do it with the volume keys????
Click to expand...
Click to collapse
i find it is dificult to press both vol up and down with the back cover on. Try it with cover off, there is more give in the buttons. Plus be sure and press the right spot, you can sort of feel the button going down. Do them individually, dont just put both fingers on and press (well, till you get better at it )
samsamuel said:
i find it is dificult to press both vol up and down with the back cover on. Try it with cover off, there is more give in the buttons. Plus be sure and press the right spot, you can sort of feel the button going down. Do them individually, dont just put both fingers on and press (well, till you get better at it )
Click to expand...
Click to collapse
You're absolutely right! I tried as you suggested and it worked. I guess the buttons were never properly pressed before. Many thanks. Good to know my phone is still "normal".
Got to love xda!

[Q] Magldr 1.13 CWM 1.3 Help

Hey Guys I Recently tried to flash Clockwork mod so i could get this rom http://forum.xda-developers.com/showthread.php?t=1036948&page=4
Did everything right but now my phone is stuck on the magldr boot screen and my old android rom wont load:[ and now my phone wont turn on unless its connected to the usb:[ please help it wont let me boot ad sd It says SD Kernel Open Failed and whenever i go down to AD Recovery it loads up but my phone turns off after Load Done! 123456, How can i get this working please Help!
Stealthy_Stoner said:
Hey Guys I Recently tried to flash Clockwork mod so i could get this rom http://forum.xda-developers.com/showthread.php?t=1036948&page=4
Did everything right but now my phone is stuck on the magldr boot screen and my old android rom wont load:[ and now my phone wont turn on unless its connected to the usb:[ please help it wont let me boot ad sd It says SD Kernel Open Failed and whenever i go down to AD Recovery it loads up but my phone turns off after Load Done! 123456, How can i get this working please Help!
Click to expand...
Click to collapse
ok, 1. theres a quetions sub thread for you to post questions in, this is not it.
2. thers a magldr and clokwork thread you could post in, why dont you?
3. your battery doesnt have any juice, so you can either get a standalone battery charger to charge it, or do like i did and cut a usb cable, attach the +5 and negative terminals to teh battery for 5 minutes so it has juice.
and 4. it sounds like you didnt resize your partitions when you flashed the new rom, i cant believe how many newbes overlook that step. specifically it sounds like your boot partition is to small, but thats just a guess.
i can guarantee you this thread will get moved to the questions & answers thread, so dont be suprised when you dont see it here anymore.
Sorry Bro Im A Newb lol But Yeah i guess I skipped that step and i tried to reflash my old Nand Rom and it gets stuck on the DFT Screen And turns off :/ My Hd2 still wont turn on unless its connected to usb
Okay so i managed to get my old rom back up but all my apps and settings were erased:[ how can i get my clockwork mod back up to work?
Stealthy_Stoner said:
Okay so i managed to get my old rom back up but all my apps and settings were erased:[ how can i get my clockwork mod back up to work?
Click to expand...
Click to collapse
You have to boot into MAGLDR by holding the power button down while your HD2 powers on. Scroll down to option #8 AD Recovery and press send thos will boot CWM.
T-Macgnolia said:
You have to boot into MAGLDR by holding the power button down while your HD2 powers on. Scroll down to option #8 AD Recovery and press send thos will boot CWM.
Click to expand...
Click to collapse
How do I partition or whatever ? Im Still trying to get the rom from my original post? Please Help Me:/
Stealthy_Stoner said:
How do I partition or whatever ? Im Still trying to get the rom from my original post? Please Help Me:/
Click to expand...
Click to collapse
Oh and i just tried that but it said theres no boot sources? so im guessing when i flashed my old rom back on it ****ed it up? so do i have to reflash CWM? And if so how do i do the partition so i can get that rom up there? :3 thanks
I would like to piggy back on this problem. When I press option 8 my HD2 does not go into CWM. It hangs at "Load done1 E1 Fatal hit" Has anyone else come across this and knows the fix so I can get into CWM? Thanks

[Q] (HTCHD2) Android won't startup anymore.

Hello,
My htc hd2 won't start anymore.
When I press the on button it first goes to the Green HTC HD2 letter screen, then the NAND bootingscreen with this text:
aMAGLDR V1.11
by cotulla 2010
booting android from NAND
ANDROID LOAD at **********
From nand
blablabla
etc etc
LOAD DONE!
12345
GO GO GO
And at the end an Android logo with HTC HD2 underneath it.
and then it's starts all over again.
How can I fix this? or restore everything back to the basics of android?
I dont know anymore specs from the Nand build
only it has the CyanogenMod on it and it's Gingerbread.
Plz can anyone help me, I'm gonna fly tomorrow to the States for holydays so I very appreciate it if anyone can help me before I'm gone.
(I'm sorry for my bad english!)
Grtz Jordy
constantly rebooting a few seconds into the sequence is sometimes down to a bent battery pin. check them carefully. Failing that id suspect a fresh flash is in order.
I have a bent battery pin indeed. but i have it since the third day i bought this phone (1,5 years ago).
How do i make a fresh flash ? :$
Before fresh flash .. what has made your Android fall into a bootloop? have you flashed anything via cwm recently? that could be it.
nope did nothing. only thing i did was putting my sd card in my comp, and after that first some apps didn't work correctly, but that happens me all the time. so i reboot and so it all started ...
Can u guys give me a working link to android on the hd2..i only want to boot from sd
Sent from my HTC Glacier using XDA Premium App
Ok,
You didn't turn off your device, you removed the sd card immediately (or unmounted it from settings), right?
You have data2sd enabled on your build, or apps2sd?
Try to remove sd-card and then boot...
If above ddn't work, try to reflash your build through cwm (without wiping data, which will only restore your system to original state) ..
Report back ...
thefuzz03 said:
Can u guys give me a working link to android on the hd2..i only want to boot from sd
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Would you mind using the search tool and not hijacking other's threads?
here you go: http://forum.xda-developers.com/forumdisplay.php?f=735
Click to expand...
Click to collapse
@Marvlesz; yes i unmounted it from settings, and im using apps2sd
without sdcard he still wont start normally...
could you explain how i do the reflash?
with the volume button down and then start it up it also stays on the colored screen...
I'm sorry but I'm very newbie @ this stuff.
It depends on how you flashed this ROM in the beginning .. ( I assume you did it through cwm)
So get to the website of this rom and download it again (or pass if you have it on your pc)
bootup your phone while holing nothing but the power button, phone will remain on aMAGLDR and won't boot into Android.
Go to option 8. AD Recovery (using volume rockers) and press Green button (dial) ..
A black screen with orange text will appear, remove your sd and put it into your pc, copy your ROM's Zip file and return sd to phone.
Go to "install zip from sd" .. choose second option, and choose the rom.. then hit yes. After it's done, hit on reboot.
Report back ..
Hi. im sorry i didnt listened to you :O
I saw the menu and did the hard reset, everything is gone, but i dont mind, im glad he is working fine again
Thanks for your help!
lol, Im sorry to hear that you lost your information ... I recommend doing NANDROID backups from time to time (from orange menu) as well as apps backups with (titanuim backups) .. even if you messed up with the system files, you still can get it back ..
Anyway Im glad that you phone has come back to life..
Quick
Quick help
im having a problem with my HTC HD2
im having pretty much the same problem..everytime i try to turn it on it loads up all the way to the occupy together screen then it just starts back over again. so i left it on the charger and let it charge for a whole night and its still doing the same thing. i've tried to do a hard reset but my volume down button doesnt work =/ is there something i can download or is there an update that i need for it to work again?! SOMEONE HEEELP!

Need help, dont know what to do!!

okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.
if you have wp7 on it...your problem is because of incompatible sd card..try another sd card and hard reset
GunbladeGriever said:
okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.
Click to expand...
Click to collapse
Just thinking it could be a bad battery, but more info would be helpful.
Or check if battery pin is bent
Sent from my HTC HD2 with WP7.5/android miui using tapatalk
battery and pins are fine... th sd card was working before but now the phone seems to have been condemed.. any information you would need just feel free to ask, i dont really know what to tell you guys since i dont know whats wrong with it
I managed to get to the rgb screen.. I'm guessing hspl is installed, because it says hspl on the screen lol.. Any suggestions on what I should do from here?
Sent from my PG86100 using XDA App
that happened to my phone once. i thought my battery was fried or something, but it turned out that my pins were bent. works fine now.
if you can get to the RGB screen, your phone is still safe i believe. Try getting a compatible SD card and then try and flash another WP7 rom. Also make sure your HSPL is 2.08. Anything otherwise, won't boot also.
HSPL must be 2.08.... if any other version, WP7 wont boot... but most of problems in sdcard compatible
task 29, and reinstall hspl , than magdlr. also make sure of bad blocks.
okay, at first i tried an ruu that i got directly from tmo but it would always hang at 8%... then i ran the task 29 file and it went through 100%... im gonna let the battery charge for a little bit since i dont want anything else to go wrong... im going to search on how to install hspl and everything else.. im asuming that i need an sd card for this lol. thanks everyone for the help!
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Guys I’m having a similar problem. I had “XBmod-Yuki 2.1” loaded yet I was experiencing sporadic reboots.
I decided to re-flash using the SD card advice provided by XDA site. I purchased a new compatible SanDisk 16gb.
While following the XDA instructions to the letter, I completed the “Flash the ROM with DWI” step (w/ SD Removed) and my phone is now on an endless reboot loop. After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
The phone is not bricked because I can still re-flash the TMO stock 3.14. Yet when I try again, after “123456 GoGoGo” the screen goes dark and reboots; endlessly.
I love Windows Phone 7.5 Mango and I must restore my phone to its glory…
Please help! What do I do to get pass this paralyzing issue???
insert card to phone and turn on with Volume Up + Down + Power together.... when white screen shows, follow instructions on screen...
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Thanks for the reply DXDY...
I tried what you suggested. The master reboot completed and the phone rebooted into the same endless reboot loop.
My steps have been to:
reflash stock 3.14; allow complete boot up
install magldar113_daf
delete mbr using magldr113
Enable 24MB extra memory in Magldr services
Flash the rom with DWI...
after i flash the rom it reboots in to the endless loop. it never completes a boot up cycle. Right after "123456 GoGoGo" the "tomobile "stick together" logo flashes and the phone reboots; endlessly...
I have tried different roms; exact same behavior...
it has to be something simple because, the phone is not bricked; I can still re-flash the TMO stock 3.14. The stock ROM works perfectly and my SD card (Sandisk 16gb class 4) still works perfectly also...
Any help you can provide is greatly appreciated...
only problem then is SDcard.... try boot without sdcard for test.....
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
i have tried reflashing with the SD card in the device and with the SD card removed. Once before i was able to flash the either way (with or without - both ways worked before). Now immediatley after reboot the device enters endless reboot loop...
any help is appriciated...
try with NAND toolkit... http://forum.xda-developers.com/showpost.php?p=19931919&postcount=501
wipe NAND with Task29, check and install again HSPL 2.08
flash WM6.5
flash MAGLDR
after that flash WP7
dont know which other to advice you...
melcad Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endless
what is task29? i understand the other items. i just need clarification on task29...
Task 29 formats the partition drive of your device where the ROM resides.
it's cleaning partition, removing any leftover junks thereby giving a fresh partition for the ROM to operate
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Wow, that did it! the task29 cleaned up the NAND as you said and allowed me to reflash WP7...
One last question; when updating WP7 using the cab sender method; may I remove the languages that i dont need from the RAR pack???
incompatible sd card....change and try again with another sd card
dont remove the language cabs...preferred to keep them in

HTC HD2 automatically turns on when battery is inserted

Hi,I have a problem with my HTC hd2 which is when I insert the battery the phone boot up without me even pressing the on button.So was just wondering is there anyone that knows a fix for this problem I'm facing?thanx
Sorry but your problem is strange for me, I suggest you to reset all the phone starting with the task29 to erase the internal rom.
Make a backup of anything you want first then i would start with just a fresh download and install of the ROM your using. If that don't work then I would suggest what adone.h has said to try. Don't forget to wipe data, cache, and delvic if using Android.
Ok thanx for that adobe.h and htccraze, I will give then both a try and keep u posted on what happens.thanx
hmmmm i thought it was common for HD2 to do that or is it only during those HSPL/ radio update this would happen.
OK mengfei,but when i flash a new android rom the nand way and its all booted up and everything,then i press the power button i dont get the screen so the turn the phone off or restart it.Any answers?
Eject battery, let it out for some minutes.
Reset the OS.
If these things above won't work, you have to install a new OS (maybe bootloader has some problems, too). I had this problem, too. Got rid of it by removing the battery for a longer time. Now everything is fine.
it's a weird phenomenom
i got the same problem when i firstly got the HD2
but it automatically disappeared last month after i flash several wp7 roms
I have the same problem
It is a hardware problem in the digitiser/cable/button area.
My touch screen failed, when I got the repaired phone, I had the same symptoms - battery in phone on. Also pressing just the volume down button would boot into the tri-colour screen. This happened with windows or android flashed into nand.
Odd thing was that running the key test function in magldr seemed to work and the power button operated normally as far I could tell when powered up into windows or android.
I sent the phone back for repair again and got a refurb replacement.
I have tried to flash a windows 7 Rom to cure the problem mario_net,but when I trying to flash the Rom it just keeps coming up error near the end of the flashing process.Have u any answers people?
CR5N,just wondered how do u do the key test function in magldr?
DAZZA35 said:
CR5N,just wondered how do u do the key test function in magldr?
Click to expand...
Click to collapse
Apologies, it is under advanced -> key test in cwm (I'm on 5.0.2.6) accessed via magldr recovery.
Let it out for some minutes don't insert battery immediately after removed.

Categories

Resources