Related
Why dont they make a flash tool that plugs into your micro usb port or replaces the battery cover, so we can finally take pictures with a flash?
I dont believe this would be too hard..would it?
Using flash takes away all shades and your pictures will look like 2D drawings. Applies to any camera off course
himalayasplaya said:
I dont believe this would be too hard..would it?
Click to expand...
Click to collapse
It would, as the USB port can't give any power.
Just get yourself a keychain flashlight... or even better, a camera.
darfri said:
Using flash takes away all shades and your pictures will look like 2D drawings. Applies to any camera off course
Click to expand...
Click to collapse
Uhhhhhhhhhhhh?
darfri said:
Using flash takes away all shades and your pictures will look like 2D drawings. Applies to any camera off course
Click to expand...
Click to collapse
That is the biggest crock of S*** I've heard in a while. I guess all of those professional photographers who use flashes are wrong, huh?
bluedragon1971 said:
That is the biggest crock of S*** I've heard in a while. I guess all of those professional photographers who use flashes are wrong, huh?
Click to expand...
Click to collapse
Which is better, a less than ideal photo (and I'm not a photographer so cant confirm the effects) or a far to dark/totally black photo?
I know NOTHING of programing these phones, but from a mechanical stand point, I'm not too bad. Is there anyway to trigger something out the USB port when the camera is ready to pop? Something so that the light doesn't have to be on constantly, but can come on only when the camera is ready to snap, like a standard digital camera works? I can probably fab up a back cover with a flash built into it...
Why is this an issue? I fail to see any correlation at all between the equipment used by a professional photographer, and the convenience of a simple 3MP snapshot camera included in your phone. You were given a suggestion that addressed your problem and apparently you were quite upset by it. So, my turn... This IS NOT a 10 - 12 MP Canon, Nikon or Leica! Its to snap a quick shot of something for later reference - an event, a schedule, a location, a photographic note, if you will. The camera in your phone is not the primary device or function of your phone - its an 'added function' that can be effectively used as intended, or complained about by those that can't fully appreciate its capabilities!
Oh, and those professional cameras listed above don't make or receive phone calls, don't have e-mail or voicemail capabilities, don't play my mp3s or videos, can't use wifi to browse the internet or for online banking or for etc., store GBs of data other than pics & video, function as a gps unit, open or edit my Office docs, use text messaging, or play a myriad of games! And yet they cost from $699 to $999 apiece! How do those manufacturers' sleep at night? And you won't find a forum for support anything near as intense and complete as the XDA-Developer's Forum - all for what you can afford to donate!
Now I don't mean to preach, so here's examples: instead of a daily to-do or task list, I can take a quick series of photos to remind me! Pix of ATM card to remind me to go to the bank, of a loaf of bread or carton of milk to remind me to hit the grocery store, of the Suburban's front end to call for an appointment to get the front-end aligned, of the dog to remember his vet appointment, and of a document I need to complete by end-of-business! Those pix are worth a thousand words, and the time it would take to write detailed notes to myself! Then simply delete photos as tasks are completed! Too cool! At the store over lunch and see a new Sony LCD HDTV you like? Take a photo of it, along with the pertinent sales tag info, and research it later at home on the internet! Meet someone you haven't seen in a while? Take a photo to remind yourself to tell the wife that night, with that picture to enhance your tale! Need to match paint for a room in the house with the colors of the furnishings or rugs? Take a series of pictures with you to the hardware store. Take a photo of a suspicious vehicle 'just in case'? An accident, a surprise event, a crime or disaster? You at least have the camera in your phone - its way better than no camera at all. For your 'Keepsake Memories' get a decent camera, complete with a flash!
Hope this helps put things in perspective for you.
BTW, this was a rant - not a discussion or an argument, so keep your opinions to yourself. I've said what I wanted to say!
BigDad_1
When I started this thread I did not intend it to go out of control. I was just wondering if anyone knew where to get one or how to make one.
This is more along the lines of what I was looking for, except for the Kaiser instead of the iPhone: http://www.techeblog.com/index.php/tech-gadget/snaptureflash-gives-iphone-makeshift-camera-flash
I think a new back cover that has a built in flash would be awesome. If someone makes one, and it works, I'll certainly buy one.
I think about how much I miss my flash on my old phone all the time. That was a huge blunder leaving it off the Kaiser. Even if you never use a flash on your pictures, it was a handy flashlight. But it was certainly nice to have a flash for pictures too.
himalayasplaya said:
When I started this thread I did not intend it to go out of control. I was just wondering if anyone knew where to get one or how to make one.
Click to expand...
Click to collapse
Don't worry, the thread isn't 'out of control' you just need to take heed of what kilrah has already posted. The USB port on the Kaiser isn't a host port so it doesn't (and cannot be made to) behave like an ordinary USB port on your PC (well not without some serious electronic redesign work far beyond what we as non phone designer sorts could come up with). Other options must be investigated.
Was the USB comment directed at me? I was just wondering if there was a way to trigger the flash 'remotely'.
as for some sort of add on flash, my dad has made several LED units, self contained, that fit in a 3/4 inch copper pipe cap. Mostly made of brass, it includes a switch and is heavy. He used it as a night lite for something like 7 days str8 on a single 2032 battery. Granted, it is not sleak, but it was self contained.
The main problem with a 'flash' is that the camera app wouldn't be able to process the picture any faster (focus on it and make adjustments for light) before snapping it because the camera app wouldn't know that a flash would be coming soon to compensate for a flash... unless we have a camera programer in our midsts? Or, can a camera app be ported from a flash enabled device, or do the OEM flashes stay on as long as a flash is called for, so there is no 'compensation' per se?
I am getting ready to purchase a TyTN II parts phone, I'll have to see what I can do with it. I've got a few ideas up my sleave. Does anyone have what the Proprietary USB B port pin out is, both sides of the tongue?
if anyone makes this invention i will gladly buy it from them ASAP
Heh, I've started working on it... at this point, I'm not working on making it interface with the camera, it will have an external switch and be something you turn on when you want it, and could also be used as a flashlight to light your way in the dark...
I am also toying with having it light up when ever the camera is in use, but I need to find a dead kaiser (the phone I own, so the phone I'm developing for) in order to work on some sort of interface for automatic operation...
Anybody got a Kaiser with a crushed screen and case that I could tinker with? *grins*
SaltyDawg said:
I think a new back cover that has a built in flash would be awesome. If someone makes one, and it works, I'll certainly buy one.
I think about how much I miss my flash on my old phone all the time. That was a huge blunder leaving it off the Kaiser. Even if you never use a flash on your pictures, it was a handy flashlight. But it was certainly nice to have a flash for pictures too.
Click to expand...
Click to collapse
/agree
I used the flash on my S710 as NIGHT LIGHT all of the time. I think an external flash able to slide in an touch the battery contacts would be cool. Een if you had to turn on the light by a little switch built into the back cover. 5V should be MORE than enough power to light up maybe 3-5 small LED lights. Even if they werent connected to the cam directly, im sure it would help a lot in low light situations. Just my 2 cents I like this idea
I am in the process of comunicating with LED suppliers, and will begin mocking something up here in the coming weeks... I'll keep you posted.
A couple of questions for potential users... What is better, to make a cradle to slip the phone into, to make the components fit completely with in the format of the phone now, or to make the phone slightly larger (like an extended battery pack)?
The advantage of a craddle is that it can be put on and removed fairly quickly... Downside is that it would be hardest for me to make... (grins)
The advantage of the lights fitting within the format of the phone now is that you don't have to have something extra, or an extra large phone, to carry around. Perimatly mounted, and ready to go at all times... the down side is reduced performance because of no extra batteries, and possibly fewer LEDs, and the fact that the owner of the phone would possibly have the hardest time installing it.
The advantage of an extended battery type back cover is that you can get extended battery usage (by use of separate batteries for the LEDs), and nice balance between easy on/easy off and size... the downside is that the phone would be slightly larger, and you would have to carry the extra back cover if you didn't always want the phone bigger, but wanted the option for a flash.
The cradle idea would be the most expensive by far, and quite probably out of my reach at this time.
The extended back and original size formate are going to be fairly close in price I have the feeling.
The extended back will probably be the easiest to build, but personally, I'd rather not use that style.
So, what do _YOU_ think?
I think Mag light and all problems solved
Seems alot to do for a camera that isn't very good anyway, but good enough for snapshots.............. After all it's not an SLR..............
The best one, in my opinion, would be an entirely new battery cover that had LED lights mounted in it, and was not any bigger than the original battery cover.
Something that is permanently mounted, and basically a part of the phone, and not making the phone any bigger (it's already a brick). Maybe a little larger than the regular battery cover, but not a lot. Hopefully not enough to notice. I'm not worried about battery life as this would only get used for a few minutes every day (at the most).
I don't know if that is even possible, but if it is, I'll take 4 of them.
Nobody ever uses an external GPS receiver, so maybe the stuff could go in right there?
stylez said:
I think Mag light and all problems solved
Seems alot to do for a camera that isn't very good anyway, but good enough for snapshots.............. After all it's not an SLR..............
Click to expand...
Click to collapse
Yes, a maglite would work... but I take many photos with my camera when I can't put both hands in position to illuminate the subject and hit the shutter... I go to the car salvage yard alot, and if I can't see a part good enough from my vantage point, I'll hold my phone up and snap a picture from there to see if it is worth digging for, for example.
As for it not being an SLR, MOST digitial cameras are NOT slr... and MOST people do not shell out tons of money for an SLR. If you don't like the camera phone, that's fine... you can carry a second item. For the rest of us, we'd like to improve on a decent useable camera, so we will, Thank you.
SaltyDawg said:
The best one, in my opinion, would be an entirely new battery cover that had LED lights mounted in it, and was not any bigger than the original battery cover.
Something that is permanently mounted, and basically a part of the phone, and not making the phone any bigger (it's already a brick). Maybe a little larger than the regular battery cover, but not a lot. Hopefully not enough to notice. I'm not worried about battery life as this would only get used for a few minutes every day (at the most).
I don't know if that is even possible, but if it is, I'll take 4 of them.
Nobody ever uses an external GPS receiver, so maybe the stuff could go in right there?
Click to expand...
Click to collapse
Hehehe, my wife never uses her GPS at all, but I use an antenna adapter from Wilson Electronics along with a mini whip antenna with a magnetic mount... it go from 1-2 bars on a bad day (with TomTom Navigator 6), to a full count of 5 bars... unplug the antenna, and it goes back down, plug it back in, and it bounces back up...
I've looked into using that area, but it really doesn't afford much in the way of space, and I'm not too keen on modifying the original fabric of the phone itself, it just doesn't seem 'right' to me.
Your vote has been tallied.
Some may find this interesting, if a little disturbing!
http://www.youtube.com/watch?v=QKztg1ra4-0&feature=youtube_gdata_player
Ooh very cool!
I'd love to see iFix it do the tear down and perhaps a comparison between the NFC/NFC-free versions to see just why the chip was left out and why the extra bulk is there.
thats a damn thin chip!
Ahh I saw this earlier and it made me feel sick.
I know I'd end up losing one of the screws if it was me!
Talk about precision.... This device is truly crafted with in depth expertise.
This was great shows you how to, open it up if you want to paint the device or something.
Does anyone know what type of plastic is used on the sgs2?
I would never be able to do this... Guy must either be really confident or really rich...
But amazing space usage. The huge cluster up top explains why the heating up is almost unnoticeable at the bottom of the phone.
Sent from my SHW-M250S using XDA Premium App
Thanks for posting this,,, going to have to double my dose of high blood pressure meds after watching! And remember once again to breathe.
Aaaaaaaaaaaaaah,
Wouldn't do that with my (soon to come) new sgs II
But nice vid, seems easier then sgs itself.
I'd love to see what GPS chip is inside there...
that's a sexy phone inside and outside!
Hi guys,
as most of you here, I`m planing on buying THE ONE as soon as it gets to the stores in our country.
Because of that I started checking and reading the general ONE forum almost 15 times a day . One of the most important things for me, when I buy a phone and give like 600+ euro, is for the phone to be as perfect as possible at least the first couple of months.
That`s why I decided to make this thread as a guide that explains the main things you should watch for when buying the phone from your store !
1. Take a look at all sides of the phone and see if there are any GAPS or OVERHANGS, cause its a "unibody" design after all. Here are some pictures and link to original thread, where this problem is discussed:
https://lh4.googleusercontent.com/-...AAAAAAFc/34GVNAI3mKc/s661/20130319_152241.jpg - GAP
http://i60.photobucket.com/albums/h18/djbenny1/DSCF8356_zps0597f759.jpg - OVERHANG
http://forum.xda-developers.com/showthread.php?t=2197732 - Original thread
2. See also if there aren't any gaps near the volume rocker, and if it doesn't stick while you press it (incl. the power button). I remember that one member here had a similar problem, but cannot find the OP.
3. After you power on the phone try to connect to internet (all major stores have free wifi) and download a Dead Pixel Test app from the store. Then check for any dead pixels on that gorgeous screen !
4. I bought a nexus 7 tablet some months ago and got a replacement, because of a bad headphone jack design. What that leads to is a cracking sound from headphones, when you just plug them and navigate through menus or slide through main screens, but don't listen to music or watching video. Many devices suffer from a problem like that, so I test that always in the store, either with the pair of headphones in the box, or with my own ones. In many cases that means poor shielding and can affect more parts in the phone itself.
5. Camera firmware (latest batch) : According to a camera test published here - http://www.hardwarezone.com.sg/review-htc-ones-camera-tested , pre-production units had some kind of a hardware issue and that's why many photos taken with the device seemed blurry on the edges.
So it's really good to know, how can we check if the unit we are buying is from the latest batch or not ... will update this when I have more info.
OP can be found here : http://forum.xda-developers.com/showthread.php?t=2206222
6. Phone display: this is where I`m a bit confused really. Here is the thread, where I read that the ONE can have different display characteristics in terms or color temperature, contrast and brightness.
Would be very happy if someone can explain that in details and suggest if this is something we must watch for, before buying our unit.
Original thread can be found here : http://forum.xda-developers.com/showthread.php?t=2202869
That covers the main things that I`m aware of till the moment. If you have any more suggestions, I would be happy to update the OP.
Also some more clarifications about 5. and 6. would be great :cyclops:
And one really important question which I would like to ask and don`t want to make another thread for : how does the heat affect the casing and is it a problem if the device gets too hot (cause I love to use it for gaming sometimes). In other words: Could a GAP or OVERHANG occur after some usage, because of the phone reaching high temperature?
Here you can see a thread, where guy speaks about a 44,4°C device temperature : http://forum.xda-developers.com/showthread.php?t=2207645
UPDATE :
5. According to https://plus.google.com/+PhilNickinson/posts/BkaNVpcNySN it seems like its a software update after all, and not a hardware one ...
And here is a good guide on how to check if your phone is from a later batch or not : http://forum.xda-developers.com/showthread.php?t=2209277
Great write up. Will definitely use this guide.
Sent from my EVO using xda premium
Can you really even see a dead pixel on this screen? I have one on my EVO 4G LTE and I can only see it if I use the Dead Pixel Test app.
You can once you've noticed the bloody thing. It taunts you. Although on this screen, probably not so noticeable unless it's against a plane background. Annoying all the same.
Surely you can find something that you can convince yourself is a flaw that will make you miserably unhappy with your new One. Then sell it to me...
If the casing heats up so much it distorts, you probably want to put it down. That'll be well in excess of 400°C, no matter what the alloy.
bosotros said:
Surely you can find something that you can convince yourself is a flaw that will make you miserably unhappy with your new One. Then sell it to me...
Click to expand...
Click to collapse
When you pay a lot of money for a device, you expect it to be perfect, right ?
c0rp1 said:
When you pay a lot of money for a device, you expect it to be perfect, right ?
Click to expand...
Click to collapse
Yes, but a line does need to drawn...
There will always be a gap, it's not like atoms are physically connected together, even in a solid like metal.
BenPope said:
Yes, but a line does need to drawn...
There will always be a gap, it's not like atoms are physically connected together, even in a solid like metal.
Click to expand...
Click to collapse
You pay 500 odd quid, or what ever, for a device that's been marketed for its build quality and craft....
If you find a flaw, you should have a replacement.
Although I have pre-ordered a HTC One, I'm hoping i get some sort of super batch. Slightly worried, for a phone thats not even out yet, there seems to be many issues.
As long as mine comes with no overlap or gaps and works perfectly, I'm happy.
Unfortunately these items are mass produced and the original batches more than likely will have some flaws in them, mostly minor, but like others have mentioned. You pay this much for a phone, you want it to be perfect.
Awesome write up OP!
Sent from a galaxy far away!
c0rp1 said:
6. Phone display: this is where I`m a bit confused really. Here is the thread, where I read that the ONE can have different display characteristics in terms or color temperature, contrast and brightness.
Would be very happy if someone can explain that in details and suggest if this is something we must watch for, before buying our unit.
Original thread can be found here : http://forum.xda-developers.com/showthread.php?t=2202869
Click to expand...
Click to collapse
We are still clarifying in the thread whether there is a higher contrast version of the screen and what its color temperature is. Just stay tuned. I keep the first post updated with the latest information.
How do I check if its first batch or not?
Sent from my GT-I9300 using Tapatalk 2
ksarius said:
How do I check if its first batch or not?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I think you should read this thread here : http://forum.xda-developers.com/showthread.php?t=2209277
I've recently purchased black HTC ONE. Although at first look device looks great (design is near perfection), I am really disappointed with its quality.
Build quality: both sides of the phone have rough edges - skin gets caught leaving white residue most of the time. Upper left edge of the screen is not fitted well - raised above the speaker grill
Really hot! It gets uncomfortable hot after few minutes of browsing over wifi - the screen gets warm as well! I also have GNote 2 and Iphone 4s and they get to such temperatures only after havy use when charging.
Camera is no good! (and yes I know how to take a picture) - pictures are noise (in relatively good light) and contain pinkish tint in center when focusing on white surfaces
Pixel grid (horizontal and vertical) is quite visible on the screen when jts turned off (this does not bother me), or on a mid day light and even indoors under some angles (and this is f-ing bothering me!)
I dont know did I get a really bad unit or this device is all looks and no quality...
ssasa said:
I've recently purchased black HTC ONE. Although at first look device looks great (design is near perfection), I am really disappointed with its quality.
Build quality: both sides of the phone have rough edges - skin gets caught leaving white residue most of the time. Upper left edge of the screen is not fitted well - raised above the speaker grill
Really hot! It gets uncomfortable hot after few minutes of browsing over wifi - the screen gets warm as well! I also have GNote 2 and Iphone 4s and they get to such temperatures only after havy use when charging.
Camera is no good! (and yes I know how to take a picture) - pictures are noise (in relatively good light) and contain pinkish tint in center when focusing on white surfaces
Pixel grid (horizontal and vertical) is quite visible on the screen when jts turned off (this does not bother me), or on a mid day light and even indoors under some angles (and this is f-ing bothering me!)
I dont know did I get a really bad unit or this device is all looks and no quality...
Click to expand...
Click to collapse
Bad unit, get a replacement. There seem to be quite a few (I'm waiting for my second - because of a borked plastic cut) but I've also seen perfect examples...
Don't have any of those problems, Black One, build date 27th May Tierra del Fuego sub-contractor (FA)
Just send it back. Obvious.
so u expect ur first wife to be all sweet and caring and lovey dovey and makes a sandwich every morning?
get real
shiningarmor said:
so u expect ur first wife to be all sweet and caring and lovey dovey and makes a sandwich every morning?
get real
Click to expand...
Click to collapse
So how many wives do you plan on trying to get?
That overheating issue you're facing is not normal, I believe. I have had a Galaxy S3 which got really hot after minimal usage, and the HTC One is great when it comes to that in comparison. You have to understand that aluminium soaks up the heat from the internals of the device, which is a good thing and a bad thing; it is perhaps bad because it can get a bit uncomfortable to hold while playing games, for instance, but at the same time it is good because it preserves the internals of the device and prolongs their life.
I have the a silver one and I do not face the problem with the edges. I read that the black one has a coating on it which makes it more prone to scratches, dings and chips than the silver one, so maybe that is the problem you're facing? I have also read that some of the earlier versions had gaps (like the screen not being fitted well, as you mentioned) but I am not sure about them. If you feel uncomfortable about the device, just go to the HTC service center and talk to them about it, perhaps they can sort you out a replacement if you're under warranty.
I cannot comment on the camera because I am by no means a photographer or even have a lot of experience with them, but it is suffice to say that I love the camera and I feel it is much better than my S3, sister's 4S and Dad's iPhone 5.
Yes I do expect here to be exactly as you've described. Maybe this is why my relationships does not last more than a year
I am also thinking of asking for another unit. But in my cowboy / banana country this really a hassle...
Nippero said:
So how many wives do you plan on trying to get?
Click to expand...
Click to collapse
maybe 3 xD
ssasa said:
Yes I do expect here to be exactly as you've described. Maybe this is why my relationships does not last more than a year
I am also thinking of asking for another unit. But in my cowboy / banana country this really a hassle...
Click to expand...
Click to collapse
hahaha
ot : ur unit isnt normal. get it replaced
TarekElsakka said:
That overheating issue you're facing is not normal, I believe. I have had a Galaxy S3 which got really hot after minimal usage, and the HTC One is great when it comes to that in comparison. You have to understand that aluminium soaks up the heat from the internals of the device, which is a good thing and a bad thing; it is perhaps bad because it can get a bit uncomfortable to hold while playing games, for instance, but at the same time it is good because it preserves the internals of the device and prolongs their life.
I have the a silver one and I do not face the problem with the edges. I read that the black one has a coating on it which makes it more prone to scratches, dings and chips than the silver one, so maybe that is the problem you're facing? I have also read that some of the earlier versions had gaps (like the screen not being fitted well, as you mentioned) but I am not sure about them. If you feel uncomfortable about the device, just go to the HTC service center and talk to them about it, perhaps they can sort you out a replacement if you're under warranty.
I cannot comment on the camera because I am by no means a photographer or even have a lot of experience with them, but it is suffice to say that I love the camera and I feel it is much better than my S3, sister's 4S and Dad's iPhone 5.
Click to expand...
Click to collapse
Its not chipped or scratched. It looks quite nice really. However you can feal its edges scratching when you hold the phone. Nothing dangerous just bloody annoying - due to hype about build quality I had my expectations set high.
I am no photography expert I just take pictures with steady hand and in fair light - if my subject is the white wall, the pink tint is all over the middle of the picture
As others said probably very bad unit. I'll try to replace it on monday.
Definitely defective. I've been using the phone for the last hour browsing the net and checking email. Still cool to the touch. Not sure what the sharp edges are...
mine got pretty hot the first week i had it and the battery life wasnt very good but after having it for a while it seemed to have settled down and battery life is very good now
Itaintrite said:
Definitely defective. I've been using the phone for the last hour browsing the net and checking email. Still cool to the touch. Not sure what the sharp edges are...
Click to expand...
Click to collapse
Cool to the touch? Do you have massive calluses on your hands that are impenetrable to heat? I don't know if I've read of anyone else describing this phone as cool to the touch when being used.
As for the OPs phone. Return it. I've got black One and it is so damn nice. If you aren't fully enjoying it, something must be defective. The casing certainly sounds like it is. The camera: I recently took a short trip and only brought the phone as my camera. Before, I didn't like the camera so much. After spending time with it, I grew to like it quite a bit. It isn't an amazing camera, but it still gets pretty good shots. Maybe your settings need some tweaking, or you got a really bad unit and the camera is defective as well.
Anyway, take it back. Get yourself a perfect One. :thumbup:
Sent from my HTC One using xda app-developers app
ataft said:
Cool to the touch? Do you have massive calluses on your hands that are impenetrable to heat? I don't know if I've read of anyone else describing this phone as cool to the touch when being used.
As for the OPs phone. Return it. I've got black One and it is so damn nice. If you aren't fully enjoying it, something must be defective. The casing certainly sounds like it is. The camera: I recently took a short trip and only brought the phone as my camera. Before, I didn't like the camera so much. After spending time with it, I grew to like it quite a bit. It isn't an amazing camera, but it still gets pretty good shots. Maybe your settings need some tweaking, or you got a really bad unit and the camera is defective as well.
Anyway, take it back. Get yourself a perfect One. :thumbup:
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Well, then fact that I'm in a room with AC probably helps too. But yeah, pretty cool to the touch. Not even warm.
Please don't feed the trolls
----------------------o('_')o----------------------
Sent from an HTC One with using xda app:
TrickDroid ROM 5.6
Bulletproof 1.10
ssasa said:
Yes I do expect here to be exactly as you've described. Maybe this is why my relationships does not last more than a year
I am also thinking of asking for another unit. But in my cowboy / banana country this really a hassle...
Click to expand...
Click to collapse
I think a lot of us forget that not everyone has the opportunity to just walk in store and get a replacement.. There's a lot of downsides to ATT and Tmobile, etc. upsides are they will most likely exchange them until your happy. At least you dont have to accept a bad one..Keep mentioning zero gap til they bring one that applies I got lucky i guess and my first one is nearly perfect.
It sounds like yours is bad enough to do whatever you gotta do to get it replaced. Good luck,
Pixel grid? Do you mean you can see the digitalizer layer? This is quite normal on capacitive touch mobiles with thin glass
Sent from my HTC One using XDA Premium HD app
Anyone else notice this or is it just me? I need to get a cover for it and that will probably help a lot. It's the shape of the edges, its like they are designed to mess up my fingers. The slick back makes it harder to grip and therefore I have to hold it tighter than I would say my old kindle, thus making the ergonomics worse.
Vibrate said:
Anyone else notice this or is it just me? I need to get a cover for it and that will probably help a lot. It's the shape of the edges, its like they are designed to mess up my fingers. The slick back makes it harder to grip and therefore I have to hold it tighter than I would say my old kindle, thus making the ergonomics worse.
Click to expand...
Click to collapse
Yup I hate this...I even remove the slide cover to give my hands some slack. I have to hold the tablet with both hands just to make semi comfortable.
perez6991 said:
Yup I hate this...I even remove the slide cover to give my hands some slack. I have to hold the tablet with both hands just to make semi comfortable.
Click to expand...
Click to collapse
Hey whats the slide cover like? Features etc, benefits too..... is it worth the #20 pounds from currys?:silly:
gagan313 said:
Hey whats the slide cover like? Features etc, benefits too..... is it worth the #20 pounds from currys?:silly:
Click to expand...
Click to collapse
Well IMO I like the way they integrated the actual cover into the tablet itself, it makes a good stand for watching videos and stuff or playing games if you have a gamepad. As for benefits...hmm, protecting the screen may be one. I haven't seen a scratch and I've owned it for a month and a half now (my nexus 7 got hairline scratches in the first week -_-). The only problem is ergonomics, if you hold it incorrectly it makes it uncomfortable to hold after long periods of use. Overall I think its worth the buy.
perez6991 said:
Well IMO I like the way they integrated the actual cover into the tablet itself, it makes a good stand for watching videos and stuff or playing games if you have a gamepad. As for benefits...hmm, protecting the screen may be one. I haven't seen a scratch and I've owned it for a month and a half now (my nexus 7 got hairline scratches in the first week -_-). The only problem is ergonomics, if you hold it incorrectly it makes it uncomfortable to hold after long periods of use. Overall I think its worth the buy.
Click to expand...
Click to collapse
Thanks very much for that... Really helped.
I just ordered a case that's designed for the HP slate extreme. Cost me $12. Its a stand and cover and should fix the uncomfortable ergonomics. I'll post a review when it gets here tomorrow.
Sent from my TegraNote-P1640 using Tapatalk
Adding a decal skin to the face and back have helped immensely. Ofc, there's nothing out there that's a custom fit for the Tegra Note, so I just used a the cheapest Nexus 7 skin I could find and it's an incredibly ill fit, but it's an improvement. This tablet is really heavy as ****. I wonder who the genius engineer is that wanted a big magnet on the back cover.
Vibrate said:
Adding a decal skin to the face and back have helped immensely. Ofc, there's nothing out there that's a custom fit for the Tegra Note, so I just used a the cheapest Nexus 7 skin I could find and it's an incredibly ill fit, but it's an improvement. This tablet is really heavy as ****. I wonder who the genius engineer is that wanted a big magnet on the back cover.
Click to expand...
Click to collapse
HEy could you potentially post some pics of ur tab now with case/skins etc I would want to see what it looks like .....
.........Also I bought an tegra note case just last week and I have tested it out properly..... I have had no issues except to get used to holding it when playing games.... but then I got around it but standing it and putting two fingers either side inside the triangular flap where it stands and rest the two outside fingers on either hand around the triangular flap.... It made it loads easier and comfrtable to play :victory:
gagan313 said:
HEy could you potentially post some pics of ur tab now with case/skins etc I would want to see what it looks like .....
.........Also I bought an tegra note case just last week and I have tested it out properly..... I have had no issues except to get used to holding it when playing games.... but then I got around it but standing it and putting two fingers either side inside the triangular flap where it stands and rest the two outside fingers on either hand around the triangular flap.... It made it loads easier and comfrtable to play :victory:
Click to expand...
Click to collapse
Maybe you won't experience stiffness (tendonitis?) in the fingers. I didn't start to really notice this was going to be a big issue until probably a month into owning it. I'm sure there are other factors involved other than just the tablet, but I can say that I've never experienced tendonitis in my fingers before.
As far as photos, my skin looks like crap. It's all off center. If you're still interested I can post later when I get a new skin and cut it up & apply properly. I think the skin on the glass border shifts around a bit.
Vibrate said:
Maybe you won't experience stiffness (tendonitis?) in the fingers. I didn't start to really notice this was going to be a big issue until probably a month into owning it. I'm sure there are other factors involved other than just the tablet, but I can say that I've never experienced tendonitis in my fingers before.
As far as photos, my skin looks like crap. It's all off center. If you're still interested I can post later when I get a new skin and cut it up & apply properly. I think the skin on the glass border shifts around a bit.
Click to expand...
Click to collapse
I think I understand where you are coming from from the fingers side... However i dont really think NVIDIA though the case through properly lol....Only for watching movies and drawing etc.. (Hands free sort of thing.... Although I play on it everyday xD)