wifi scan error - Galaxy 3 General

greetings. I ve got a gt i5800 and suddenly the wifi does not scan for networks. I activate it and a message like scaning (for networks) was unable or not possible (in my language) and then it deactivates itself. I can use the internet turning on 3g but I cannot use wifi due to scan error. Any clues?

backup /data/wifi/bcm_supp.conf
after backing up (your stored passwords are in there) delete the file.
usually then it scans again for networks...
another possibility is, that you use a g3mod kernel for CM6.2 for froyo

mankokoma said:
backup /data/wifi/bcm_supp.conf
after backing up (your stored passwords are in there) delete the file.
usually then it scans again for networks...
another possibility is, that you use a g3mod kernel for CM6.2 for froyo
Click to expand...
Click to collapse
Are you using any sort of custom rom that might have this effect on your phone? Even the samsung roms are a little faulty and sometimes these things occur. Just flash a stock rom if you are using a custom rom and if you are using a stock rom just flash the latest one for your region or wipe data/factory reset/hard reset. This should sort it although the comment above sounds like the person knows what he's doing

kampinas said:
greetings. I ve got a gt i5800 and suddenly the wifi does not scan for networks. I activate it and a message like scaning (for networks) was unable or not possible (in my language) and then it deactivates itself. I can use the internet turning on 3g but I cannot use wifi due to scan error. Any clues?
Click to expand...
Click to collapse
any results?
sad when people disappear in gas form.
so what... I'm just curious if I could help...
sent from the desert
with XDA app

I Just tried it. It worked! Thanks by deleting that bcm thing. Sorry for keeping you waiting but the phone was my friends and I just tried it
Sent from my HTC Wildfire

Related

WiFi issues Unable to turn on/unable to scan for networks

Hello, I'm having an issue, I'm rooted with the nand unlock method. I was on flipz .1d but have now moved to .2. I've had this issue a number of times now specificly the "unable to turn on" which seems to be caused by the owner of the /data/misc/wifi/wpa_supplicant.conf file changing to root. but I am not sure what causes the unable to scan for networks to happen.
Some of the things I have done that seem to be a part of the cause: I ran flipz vanilla lock screen fix and I team douche menu unlock, both seem to make changes to /system/framework/
anyone that might know where to look to fix the scan issue? I've searched the forum and have seen a few people have the problem but no solutions yet.
Was having the same problem (came across your post from a Google search).
I got a hint from code.google.com (can't post the link). I renamed the /data/misc/wifi/wpa_supplicant.conf to /data/misc/wifi/wpa_supplicant.bak (rather than delete it), rebooted and all is well.
Seems you can just delete the file, and it'll be respawned on a reboot.
I am having this problem, but on a vibrant that has not been rooted yet.
I cant seem to find the wpa_supplicant.conf, I have tried browsing for it using the built in file manager and using ASTRO, but the data directory is always empty.
Is there a way to fix this without rooting the phone?
if your phone has not been rooted then that means your phone is f**ked up and might need to be exchanged. but this is the evo forum not vibrant. the only way to mess with system files is to be rooted
Appreciate info*, worked in a heartbeat, saved from reloading everything from scratch, which was my way out last time. Witstech A81E Froyo 2.2
*renamed the /data/misc/wifi/wpa_supplicant.conf to /data/misc/wifi/wpa_supplicant.bak
Good eye there mate!!!!
InstantKarma said:
Was having the same problem (came across your post from a Google search).
I got a hint from code.google.com (can't post the link). I renamed the /data/misc/wifi/wpa_supplicant.conf to /data/misc/wifi/wpa_supplicant.bak (rather than delete it), rebooted and all is well.
Seems you can just delete the file, and it'll be respawned on a reboot.
Click to expand...
Click to collapse
I was experiencing the same issue and read this and it works, good looking out.
same issue on mytouch 4g
i used root explorer renamed tried no good the file stays renamed but the conf. appears under it after i try to enable wifi again help plz?
Who But BilL$ said:
i used root explorer renamed tried no good the file stays renamed but the conf. appears under it after i try to enable wifi again help plz?
Click to expand...
Click to collapse
It just recreates the file when your phone gets rebooted. My Thunderbolt is having the EXACT same issue. Ive tried renaming this and deleting as well and still no luck. Im now kicking over any rocks that I can find to get my wifi working.
I have exactly the same problem.
With Root Explorer deleted the file 'wpa_supplicant.conf' but no changes.
WiFi starts up and closes down again with the famous line: "unable to scan for networks"
anyone?
shoppy said:
I have exactly the same problem.
With Root Explorer deleted the file 'wpa_supplicant.conf' but no changes.
WiFi starts up and closes down again with the famous line: "unable to scan for networks"
anyone?
Click to expand...
Click to collapse
I actually ended up having to get a whole new phone. My insurance company couldnt fix it.
joeavery2 said:
2. I've had this issue a number of times now specificly the "unable to turn on" ......... but I am not sure what causes the unable to scan for networks to happen.
anyone that might know where to look to fix the scan issue? I've searched the forum and have seen a few people have the problem but no solutions yet.
Click to expand...
Click to collapse
I had the same problem. I installed the software from the sony erikcon website to my computer, and then followed the process for updating the phone software. That did not work, since I had the latest software already. So then, I tried to REPAIR my phone software, and after that was done, my phone was functional again, and the wifi works without any problems.
Requirements:
* A PC connected to the Internet (preferably broadband)
* USB phone-to-PC connection. Please see the accessories compatibility list for your phone.
1. Run the software on the computer after it is installed.
2. Follow the procedure for UPDATE or REPAIR (if you already have the latest version).
SOLVED WIYH THIS D12r a33_8723-8703_v11_0312 20141211.IMG
joeavery2 said:
Hello, I'm having an issue, I'm rooted with the nand unlock method. I was on flipz .1d but have now moved to .2. I've had this issue a number of times now specificly the "unable to turn on" which seems to be caused by the owner of the /data/misc/wifi/wpa_supplicant.conf file changing to root. but I am not sure what causes the unable to scan for networks to happen.
Some of the things I have done that seem to be a part of the cause: I ran flipz vanilla lock screen fix and I team douche menu unlock, both seem to make changes to /system/framework/
anyone that might know where to look to fix the scan issue? I've searched the forum and have seen a few people have the problem but no solutions yet.
Click to expand...
Click to collapse
I SOLVED WITH FLASH THIS: D12r a33_8723-8703_v11_0312 20141211.IMG
People still use this phone?

[Q] Automatic settings (Unattended)

... in last weak i playing with some custom roms from Kyrillos, InDroid, Lestatious etc... and everytime i must manually set Google account, Dropbox account and some others and that is exhausting ...
so my question is... exist any automatic way for solve this "problem" ? and please do not answer with Titanium backup
thX and sorry for my english
I don't think they are other solutions than backup sorry :/
Namus said:
... in last weak i playing with some custom roms from Kyrillos, InDroid, Lestatious etc... and everytime i must manually set Google account, Dropbox account and some others and that is exhausting ...
so my question is... exist any automatic way for solve this "problem" ? and please do not answer with Titanium backup
thX and sorry for my english
Click to expand...
Click to collapse
Hey look in the folder this information is at: system / etc / wifi /, where information is stored on wifi access points. (I think).
And then there is an application "WiFi Hero" also keeping that information, you have sought such applications over the network?
I hope you serve.
ASakovoy said:
Hey look in the folder this information is at: system / etc / wifi /, where information is stored on wifi access points. (I think).
And then there is an application "WiFi Hero" also keeping that information, you have sought such applications over the network?
I hope you serve.
Click to expand...
Click to collapse
Sorry. but I have seen a different route where my cell phone, with "Froyo" there if that is the information access point (I checked) in: Data / wifi / bcm_supp.conf
You can check this by opening the document as text.
for now my message boils down to that.
the softwere (wifi hero) apparently is not for android, sorry, do not look too much.

[Q] No phone-network after ICS CM9

Hi,
I've used CM7 and CM9 before with no major problem. But probably did something wrong because after flashing couple of ICS ROMs my phone (Defy-red lens) became unusable with 2 problems:
- no mobile network connection (no phone-calls, no SMS, no 2/3G)
(Wifi and Bluetooth are OK)
- it does not save the setup, each boot is a new phone with new configuration setup.
I've tried different ROMs (CM9, Quarx, Skanky, etc) with different Kernels (7 & 9), but nothing seems to change this behavior.
The phone also doesn't recognize the IMEI and can't search of operators. I've attached some screeshots.
I was wondering if someone else could share their experience with me or, somehow try to help me. I'm willing to try out things....
Cheers.
You tried changing your baseband??
Sent from my Defy+ using Tapatalk 2
Baseband is not initialized/installed. In the first pic, it shows the baseband as 'unknown'. Select proper baseband matching your country from Baseband Switcher (settings -> Advanced->Baseband Switcher) and reboot your phone.
andr0idfreak said:
... Select proper baseband matching your country from Baseband Switcher (settings -> Advanced->Baseband Switcher) and reboot your phone.
Click to expand...
Click to collapse
Baseband is by default on Europe > Central Europe > 3.4x 900/2100 MHz which is not right for me. Should be America > Brasil > TIM 3.4.2-107-9 850/2100 Mhz.
The problem is, as I mentioned, that the phone does not save any settings. After the reboot the Baseband comes back to the default setting.
I already did the wipe factory/reset, wipe cache partition and wipe dalvik cache many times before/after flashing a ROM (and event deleted the dalvik cache folder via terminal emulator since it wasn't asking for confirmation when deleting via cwm) but didn't really change anything...
Any idea what's leading to the settings not being saved?
Thank you for helping.
PS: I didn't play with partitions, but as I've read in this post, of a similar problem, that this might be the case, I'll post the screenshot of the command df just in case...
fbugnon said:
Baseband is by default on Europe > Central Europe > 3.4x 900/2100 MHz which is not right for me. Should be America > Brasil > TIM 3.4.2-107-9 850/2100 Mhz.
The problem is, as I mentioned, that the phone does not save any settings. After the reboot the Baseband comes back to the default setting.
I already did the wipe factory/reset, wipe cache partition and wipe dalvik cache many times before/after flashing a ROM (and event deleted the dalvik cache folder via terminal emulator since it wasn't asking for confirmation when deleting via cwm) but didn't really change anything...
Any idea what's leading to the settings not being saved?
Thank you for helping.
PS: I didn't play with partitions, but as I've read in this post, of a similar problem, that this might be the case, I'll post the screenshot of the command df just in case...
Click to expand...
Click to collapse
Though the problem seems quite different but it might be your baseband switcher..
try BBs_v4
It might work.
neo.ank said:
Though the problem seems quite different but it might be your baseband switcher..
try BBs_v4
It might work.
Click to expand...
Click to collapse
Thanks. I was able to change the baseband with this app (and somehow keep this setting after a reboot - see screenshots), but under "About phone" still shows as Baseband version Unknown. And I still have no network signal...
Meanwhile... the matter with partitions and settings lost after reboot:
I know a litte of Linux, but I don't understand Android's structure or how it deals with partitions, but I might have found something:
In Bootmenu Recovery > Advanced > Show Log reads:
Bootmenu Recover v.5.0.6
I:Chechinkg arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.service.adv.enable=0
ro.factorytest=0
ro.usb_mode=normal
ro.bootmode=reboot
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=0x0000
ro.hardware=mapphone_umts
ro.revision=0
I:Cheching for extendcommand...
I:Skipping execution of exetendcommand, file not found...
W: failed to mount /dev/block/mmcblk1p25 (Invalid argument)​
As I see that in the system there are others blocks with similar names (screenshots in post #4), I was wondering if this might be related to the problem I'm dealing with (loosing settings after reboot).
I see some people had problems with this block/partition, for instance in this post - Issue with /dev/block/mmcblk1p25, but I couldn't figure out how they fixed.
Any help is much appreciated.
Hi fbugnon,
I have the same problem on my Defy. I've tried to use 2 differents builds from wdscript.fr (120613 and 120610), installed baseband switcher, but the problem is the same as yours.
Everytime the phone restarts, it resets all settings.
I'm trying to use a build from quarx (quarx2k.ru, build 120305) now, let's see if that helps.
I'll keep you updated.
Hi tiagomelo,
I've tried many differents ROMs but no one was able to change this behavior. I'm not sure, but I believe the problem is related to the partition error mentioned on my last post -- do you also have the same problem?
I was forced, eventually, to do a full SBF with Tim's original system so that I could use my phone and now I'm using CM 7.2 rc3.... Waiting for ICS to solve the calendar sync bug which is crucial for my work and then I'm back on.
Wish you good luck! And please keep us posted, I would like to know where this will lead you to.
Cheers
[B]it does not save the setup[/B], each boot is a new phone with new configuration s
fbugnon said:
Hi,
I've used CM7 and CM9 before with no major problem. But probably did something wrong because after flashing couple of ICS ROMs my phone (Defy-red lens) became unusable with 2 problems:
- no mobile network connection (no phone-calls, no SMS, no 2/3G)
(Wifi and Bluetooth are OK)
- it does not save the setup, each boot is a new phone with new configuration setup.
I've tried different ROMs (CM9, Quarx, Skanky, etc) with different Kernels (7 & 9), but nothing seems to change this behavior.
The phone also doesn't recognize the IMEI and can't search of operators. I've attached some screeshots.
I was wondering if someone else could share their experience with me of, somehow try to help me. I'm willing to try out things....
Cheers.
Click to expand...
Click to collapse
I have same problem with my phone also...........I search but not able to find out any fix for this...
Can any one help me fix it. I am not able to use my phone
Please help me out .... .....
Ajitnegi said:
I have same problem with my phone also...........I search but not able to find out any fix for this...
Can any one help me fix it. I am not able to use my phone
Please help me out .... .....
Click to expand...
Click to collapse
What ROM are you using? Your build version. And is the problem exactly as described in OP, then I see that its been resolved.
A bit same like yours
Guys i dont know if if i can help you over here but i was some issues with the call/data/3g ... for me as soon as i tried using them they froze completely, not the phone but the signals .. its was related to my baseband settings and stuff,
so i found a solution for this ...
go into recovery cpu settings,
Status: enable
Enable all modules
Scaling: Conservative
dont forget to save at bottom and reboot
if these settings worked for you then it should be alright
This is just a suggestion to the issue .. u can try it .. I don't know if it is %100...
for me it works
ibtihaaz said:
Guys i dont know if if i can help you over here but i was some issues with the call/data/3g ... for me as soon as i tried using them they froze completely, not the phone but the signals .. its was related to my baseband settings and stuff,
so i found a solution for this ...
go into recovery cpu settings,
Status: enable
Enable all modules
Scaling: Conservative
dont forget to save at bottom and reboot
if these settings worked for you then it should be alright
This is just a suggestion to the issue .. u can try it .. I don't know if it is %100...
for me it works
Click to expand...
Click to collapse
That's a different thing. The reason for your freeze would be something with your CPU/chipset.
Good to see someone who is familiar with this issue of mine ..
so would u b able to tell me why i was having this problem with the chipset/cpu related to calls and data download ...
i know its not the right thread but i tried other thread but no answers yet
i came across this solution after a lot of seaching .. trial n error
u dont know what i've been through ... but using this settings doesnt give me good downloading speed in google play though
Ajitnegi said:
I have same problem with my phone also...........I search but not able to find out any fix for this...
Can any one help me fix it. I am not able to use my phone
Please help me out .... .....
Click to expand...
Click to collapse
Hi Ajitnegi,
As mentioned before, the only solution I could find to this problem was restoring the orignal ROM (Motorola's) by doing what they call a full SBF (you can read a bit about sbf in here or in posts on this forum).
Sorry not being able to help any further. Good luck.
Cheers.
Same problem | No network connection
Hi
I am also facing the same problem, no network connection. After going through this post where you had asked to change the baseband settings to the country specific, I did change it. Unfortunately, even after changing the baseband settings, after reboot it changes to default value (.i.e. Central Europe).
While going through this forum, I could not find any final settings provided by the developer, did you get any ? If so, can you point out to it.
Thanks,
Nash
fbugnon said:
Hi,
I've used CM7 and CM9 before with no major problem. But probably did something wrong because after flashing couple of ICS ROMs my phone (Defy-red lens) became unusable with 2 problems:
- no mobile network connection (no phone-calls, no SMS, no 2/3G)
(Wifi and Bluetooth are OK)
- it does not save the setup, each boot is a new phone with new configuration setup.
I've tried different ROMs (CM9, Quarx, Skanky, etc) with different Kernels (7 & 9), but nothing seems to change this behavior.
The phone also doesn't recognize the IMEI and can't search of operators. I've attached some screeshots.
I was wondering if someone else could share their experience with me of, somehow try to help me. I'm willing to try out things....
Cheers.
Click to expand...
Click to collapse
Ajitnegi said:
I have same problem with my phone also...........I search but not able to find out any fix for this...
Can any one help me fix it. I am not able to use my phone
Please help me out .... .....
Click to expand...
Click to collapse
Hi Ajitnegi
I don't know if this is the only way to fix it, but In order to recover MY phone I had to flash a full SBF, which is -- as I understand -- basically a Motorola Recovery that works pretty much like a factory reset. Search the forum and I'm sure you'll find someone explaining how to do it.
Or if you rather take some time to better understand what's going on with your phone before you start flashing it, you might want to take a look at this excellent "All-in-one Defy Beginner's Guide".
Cheers
i have the same issue, i have No Network and No Wifi
after flashing CM9 on my SGW from stock ROM
Help please .

CM10 + 3G connection

Anyone has problem with 3g and CM10?
like its working, but after a long time, 3g icon still on bar but not efectuve working, browser cant research for a conection
after a disable data conection and reenable it everything start work again.
skulljoi said:
Anyone has problem with 3g and CM10?
like its working, but after a long time, 3g icon still on bar but not efectuve working, browser cant research for a conection
after a disable data conection and reenable it everything start work again.
Click to expand...
Click to collapse
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
Worked for me (2)
Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
i has enabled data romaing but national data roaming off, will try with this option enabled now, tks
did you know how the CM10 work with auto enable/disable sync and 3g connection?
on preview version i has an option, turn of sync and 3g after a X mim with no incomming news or something like that
Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
I try check the 2 options, but something happend, after i wake up, the icon of internet still there, but no connection, after stop and start data conection, icon get out and get in and then everything start work normal
so you have other sugestion?
skulljoi said:
I try check the 2 options, but something happend, after i wake up, the icon of internet still there, but no connection, after stop and start data conection, icon get out and get in and then everything start work normal
so you have other sugestion?
Click to expand...
Click to collapse
Same problem here. I had no problems with 2.3.6 uk official. On CM9 and CM10 I have thuis issue.
Will try to do a clean install, (flash uk 2.3.6, then CM10) because my problems started with CM9.
Do you had this problem in CM9 too?
eduwp90 said:
Same problem here. I had no problems with 2.3.6 uk official. On CM9 and CM10 I have thuis issue.
Will try to do a clean install, (flash uk 2.3.6, then CM10) because my problems started with CM9.
Do you had this problem in CM9 too?
Click to expand...
Click to collapse
i was on 2.3.6 BR and the update to CM10, and the problem began
i am getting other issues like, cant merge PROFILE with my google account and some slowly process
Have you tried this solution http://forum.xda-developers.com/showthread.php?t=1623385&page=71
Thanks alot for your hard job, this ROM is AMAZING!
I have signal drop after install this ROM (using version 2012/7/21).
To solve my problem, I copied the File_GSM and File_Seem_Flex_Tables files from my stock ROM (Retail Brazil) and replace the CM9 files.
I put the files in /system/etc/motorola/bp_nvm_default and reboot, and now I have strong signal and no more drop calls.
The ROM CM9 to Motorola Bravo CrystalTalk function is supported. I tried to copy the file Phone.apk this ROM for the Milestone 2 and the option to configure the CrystalTalk appears in the phone settings, but after a reboot the settings are lost.
ATTACHED FILES
bp_nvm_default.zip - [Click for QR Code] (1.2 KB, 29 views)
Click to expand...
Click to collapse
I've tried this procedure in CM10 and it works!!
cruizgaray said:
Have you tried this solution http://forum.xda-developers.com/showthread.php?t=1623385&page=71
I've tried this procedure in CM10 and it works!!
Click to expand...
Click to collapse
Sorry but I tried this and the problems still there. I used the files attached and the files from a gb backup. I reflashed uk gb and then cm10. Everything works great but after an idle period the mobile data connection doesn't work. Any ideas¿¿
Sent from my A953 using xda app-developers app
Maybe you can try MotoAndroidDepacker
Use SBF that gives you - a good data conection
extract radio files recompile to SBF and - flash it
How To http://forum.xda-developers.com/showthread.php?t=1459470
mike_oldfield said:
Maybe you can try MotoAndroidDepacker
Use SBF that gives you - a good data conection
extract radio files recompile to SBF and - flash it
How To http://forum.xda-developers.com/showthread.php?t=1459470
Click to expand...
Click to collapse
Ok I will try this. I've extracted the files from a gb nandroid backup so I think that this is almost the same but I will give it a try.
I've also used the baseband switching app with no luck.
Anyone knows witch files manage the 3g on our phones¿ I replaced the ones that are listed in the above posts but are there others?
Thank you mates
Sent from my A953 using xda app-developers app
Hi,
I got the same problem for Wifi and in minor way for 3G with mine (my baseband is EPU93_U_00.60.00).
I deactivated the national roaming but reactivated it now for testing ...
For the Wifi I tried to disable 802.11n in the tiwlan.ini file but seems to not work.
I'll try to do the requested log readings from tezet when I would have time.
A message for lotan_rm, you're not the alone one (also need to reach 10 post for posting in dev )
eduwp90 said:
Sorry but I tried this and the problems still there. I used the files attached and the files from a gb backup. I reflashed uk gb and then cm10. Everything works great but after an idle period the mobile data connection doesn't work. Any ideas¿¿
Sent from my A953 using xda app-developers app
Click to expand...
Click to collapse
maybe you should change the files permissions. try -rw-r--r-- on both files and reboot.
lucasdeeiroz said:
maybe you should change the files permissions. try -rw-r--r-- on both files and reboot.
Click to expand...
Click to collapse
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??
eduwp90 said:
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??
Click to expand...
Click to collapse
what country you are?
which SBF (stock froyo) that gives you a good data conection? (full name)
eduwp90 said:
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??
Click to expand...
Click to collapse
So you didn't replaced the original files. The attached files are with differents permissions. Use root explorer to replace the files and it will be with wrong permissions. Then, you change the permissions and reboot. At least here the permissions were wrong...
lucasdeeiroz said:
So you didn't replaced the original files. The attached files are with differents permissions. Use root explorer to replace the files and it will be with wrong permissions. Then, you change the permissions and reboot. At least here the permissions were wrong...
Click to expand...
Click to collapse
I'm from spain. The sbf that worked well for me was the uk gingerbread (MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_USXMILE2GBRTDACH_P013_A007_HWp2a_Service1FF.sbf).
I didn't replace that files because these are for brasil baseband. I replaced those files with ones on my backup that worked well. The problem persists.
So then I created a sbf using motoandroid depacker that only containts the cg45.smg (baseband files). Flashed it. Problem persists.
Checked the files permissions they are ok.
Used baseband changing app. Sadly, problem persisits.
I tried also a clean install. (flash uk gb, then install cm10 doing all the wipes etc...)
I will try to use brazil files and check the permissions..... thak you everybody
eduwp90 said:
I'm from spain. The sbf that worked well for me was the uk gingerbread (MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_USXMILE2GBRTDACH_P013_A007_HWp2a_Service1FF.sbf).
I didn't replace that files because these are for brasil baseband. I replaced those files with ones on my backup that worked well. The problem persists.
So then I created a sbf using motoandroid depacker that only containts the cg45.smg (baseband files). Flashed it. Problem persists.
Checked the files permissions they are ok.
Used baseband changing app. Sadly, problem persisits.
I tried also a clean install. (flash uk gb, then install cm10 doing all the wipes etc...)
I will try to use brazil files and check the permissions..... thak you everybody
Click to expand...
Click to collapse
So you have a big problem... Anyway, the files only let the mobile data working for more time, but don't "forever"... Now this problem appears after some hours.
So this problem is not solved at all?
Sent from my A953 using xda app-developers app
eduwp90 said:
So this problem is not solved at all?
Click to expand...
Click to collapse
Before overwriting files my connection was break after few minutes
After overwriting files data connection was extended to few hours
I could not get a continuous data conection in custom ROM

[Q] Wifi problem on showing psk passwords on rooted phone

Í have rooted Note3 Jelly Bean.
Wifi works fine. But i cannot see the passwords of my own wifi networks.
I have tried several methods:
Going to /data/misc/wifi and checking wpa_supplicant.conf,
And also apps like "wifi key recovery" or "Wifi QR share"
The problem is it shows a diferent psk password. Its like a long line of numbers a letter, like if it was in another code.
¿How can I translate that so it shows the real password?
e2luispa said:
Í have rooted Note3 Jelly Bean.
Wifi works fine. But i cannot see the passwords of my own wifi networks.
I have tried several methods:
Going to /data/misc/wifi and checking wpa_supplicant.conf,
And also apps like "wifi key recovery" or "Wifi QR share"
The problem is it shows a diferent psk password. Its like a long line of numbers a letter, like if it was in another code.
¿How can I translate that so it shows the real password?
Click to expand...
Click to collapse
Just grab one of the Apps of the play store. Since you're rooted they'll work fine.
radicalisto said:
Just grab one of the Apps of the play store. Since you're rooted they'll work fine.
Click to expand...
Click to collapse
Thanks but as I have said.. I have tried several apps already and all of them give me the same output.. not a valid psk password
I've got the same issue :/
ajolly said:
I've got the same issue :/
Click to expand...
Click to collapse
I cant beleive we are the only ones with this problem.
Anyone?
One more time.. still having the problem...
e2luispa said:
One more time.. still having the problem...
Click to expand...
Click to collapse
I have the same problem ...
Any Solution?
I have the Problem but on my S5 withz root :crying:
LenaTom said:
I have the same problem ...
Any Solution?
Click to expand...
Click to collapse
Its something with the Kernel, i switched to a custom Kernel and the Problem is gone, the switching deleted all saved WiFi keys but now i'm able to See them
Sent from my SM-N9005 using XDA Free mobile app
Egorych said:
Its something with the Kernel, i switched to a custom Kernel and the Problem is gone, the switching deleted all saved WiFi keys but now i'm able to See them
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the answer! How can I switch the kernel? Can you tell me where I can find more information about this?
I have the same problem with my note 3 Android 4.4.2.
I would be lucky if there exists a solution!
how to fix the wifi passwords recovery
well, I tried every new original rom for my sm n9005, I tried everything with the wpa_supplicant.conf file, even I copied a good one from other phone and I couldn't fix the problem. When I changed the kernel then the problem was fixed! I think it's the only way to fix the wifi passwords recovery!
ahodoudis said:
well, I tried every new original rom for my sm n9005, I tried everything with the wpa_supplicant.conf file, even I copied a good one from other phone and I couldn't fix the problem. When I changed the kernel then the problem was fixed! I think it's the only way to fix the wifi passwords recovery!
Click to expand...
Click to collapse
Which kernel did you take?
ultimate kernel
The "Ultimate kernel".
http://forum.xda-developers.com/galaxy-note-3#kernels.
Found a fix
I'm with a GS5, but it should be had the same issue. I opened build.prop file and changed the line ro.securestorage=true to false and now not only do I have Xposed and S Health working simultaniously, but I also fixed the WiFi Key Recovery problem
Remember to reboot after changing build.prop
Thanks so much for this answer!!!!!
I have a Galxy Note 3, Android 4.3
In this case the file was named ro.securestorage.support=true and I changed it to ro.securestorage.support=false.
Now the WiFi Key Recovery problem is fixed with all new passwords that you write ...
wifi password recovery from kitkat 4.4.4
Thanks. Worked for me. I am using note 4
Doubt
LenaTom said:
Thanks so much for this answer!!!!!
I have a Galxy Note 3, Android 4.3
In this case the file was named ro.securestorage.support=true and I changed it to ro.securestorage.support=false.
Now the WiFi Key Recovery problem is fixed with all new passwords that you write ...
Click to expand...
Click to collapse
which means the saved passwords will disappear and we have to enter the passwords again to connect ....
shockhawk said:
which means the saved passwords will disappear and we have to enter the passwords again to connect ....
Click to expand...
Click to collapse
Yes, that's right.
I have the secured password "1a1078c14e7b77c7eccd9d1e018bdb" , is there any way to convert it into the normal text password???
Please help if anyone has the solution .

Categories

Resources