Database Users

[Q] Boot Failure Black Screen Green HTC

Hi, this is my first post on this forum so first of all I would like to appolagise for all the things I've either just done wrong, or am about too....
I am trying to install android on to my phone, I am on the stock rom but have succsesfully installed HSPL3 and radio version 2.11.50.20.
I have tried a few builds of Android but allways have one of 2 results.
Once I've run clrcad followed by harlet, it tells me I'm booting to linux. The screen then goes black, it runs about 8 lines of code, stops there and changes to a black screen with a green HTC. Where it remains indefinatly.
A friend with anouther HD2 has android working fine on his device, and altho he has a custom rom he tells me its not essential, as ive read up on the potential risks I would rather stick with the stock but will change if thats whats causing the problem.
I would really appreciate some suggestions, thanks in advance for your time and help.
Peter

forgot to add, the second result is the screen going blue indefinatly, which I presume from my extensive knowledge.........lol is a blue screen of death

upgrade your radio, im on 2.12.50, and the newest is 2.15.50
also, try a modded windows mobile rom, i use standard energy with no issues.
also, make sure you only have that one android build on your SD card. and that it's a new build, not an ancient one. (check http://android.hd2roms.com/)
you shouldnt have any more issues.

Thanks for the advice, unfortunatly before seeing your post I uprgraded too chuckeys rom, not energy, but get the exact same error... Leads me to beleive the problem is elsewhere. Will keep trying tho hope its worth it.

Jai meme problme mon rom est miri hd2 v_18.0 wwe ? Radio 2.15.50.14 ?

Same problem here, tried to change my wm rom and didn't work. I'm looking tonight if I can find a solution...

A little disclaimer
I will not be for any damage that may be caused to your device, HSPL remove warranty so be carefull. Don't forget to have more than 50% of battery remaining before the process !
So, maybe here is the solution:
I've try again with differents roms, changing my wm rom etc. and nothing works.
But, at the end I've change my radio rom to Leo_RADIO_2.12.50.02_2 found here http://forum.xda-developers.com/showthread.php?t=611787
Then installed Chucky GTX Lite rom found here http://forum.xda-developers.com/showthread.php?t=618787
And to finish I've installed the bootloader and download MDJFroYoRevolution 1.4 with android 2.2
I've use the 512 Data img too (just unzip your MDJFroYoRevolution, take the 512 or 1Go file and put this file on your Android root.) isn't necessary but takes less time to work first time.
After that still not working so I managed to try to remove all files from my sd card (2Go only) and I put on ONLY MDJFroYoRevolution 1.4+512Mo Data img !
Then after 10mn~ it works !
I think the bug is only because sd card haven't enough space to create all files so the HTC logo stuck and no error message appear.
Don't forget to install the bootloader on your memory internal storage! and not the on the sd card!
Good luck everyone and I hope it will help.
ps: sorry for my english hope you understand anything

Having the same problem here. I've tried different versions of WM, different Android builds, updated the latest radio rom, all without success.
Strange thing is though that Android boots the first few times, but after resetting it more than about three times it gets stuck on the black screen with the HTC letters in the middle. The only way to get it running again is reformatting my SD card (8G). Only thing on it is the Mdeejay Froyo Sense v2.3 Clean...

Solution for the freeze screen after second boot
I put android not in the root directory but in a \Android directory on the SD CARD.
of course, I add set cmdline "rel_path=Android" in the Startup.txt file and now i can reboot my phone when i want.

Ghirt said:
Having the same problem here. I've tried different versions of WM, different Android builds, updated the latest radio rom, all without success.
Strange thing is though that Android boots the first few times, but after resetting it more than about three times it gets stuck on the black screen with the HTC letters in the middle. The only way to get it running again is reformatting my SD card (8G). Only thing on it is the Mdeejay Froyo Sense v2.3 Clean...
Click to expand...
Click to collapse
exactly the same issue here
ROM: Energy build 28244
Radio: 2.15.50.14
Android: MDJ FroYo Sense Clean v. 2.4

Having same issue.
Energy Rom
Just reformatted MS
Hspl 2.08
radio 2.15.50.4
htc desire android build
getting same green htc screen.

icemanscion said:
Energy Rom
Just reformatted MS
Hspl 2.08
radio 2.15.50.4
htc desire android build
getting same green htc screen.
Click to expand...
Click to collapse
Do you got this issue at the first boot or after few reboots as Ghirt and I have ?

peterbeer said:
Hi, this is my first post on this forum so first of all I would like to appolagise for all the things I've either just done wrong, or am about too....
I am trying to install android on to my phone, I am on the stock rom but have succsesfully installed HSPL3 and radio version 2.11.50.20.
I have tried a few builds of Android but allways have one of 2 results.
Once I've run clrcad followed by harlet, it tells me I'm booting to linux. The screen then goes black, it runs about 8 lines of code, stops there and changes to a black screen with a green HTC. Where it remains indefinatly.
A friend with anouther HD2 has android working fine on his device, and altho he has a custom rom he tells me its not essential, as ive read up on the potential risks I would rather stick with the stock but will change if thats whats causing the problem.
I would really appreciate some suggestions, thanks in advance for your time and hel
Peter
Click to expand...
Click to collapse
Always use the custom winmo Rom sugested by the Android Builder. Simple as. The myth of "Stock ROM will be sufficient" should end
Peter[/QUOTE]

Same problem!!
Ive updated my radio to: 2.15.50.14
tried 3 roms.
before installing radio - I had the Kernal problem.
and now I have the black screen with green htc.
has anyone found a solution?
is their something that im not doing?
thanks!

jigners said:
Always use the custom winmo Rom sugested by the Android Builder. Simple as. The myth of "Stock ROM will be sufficient" should end
Peter
Click to expand...
Click to collapse
[/QUOTE]
Not true. I've installed on a couple of peoples HD2's using the latest stock WWE rom with radio 2.15. It does work, and it works very well.
I'm not saying you shouldn't use custom roms, that is everyone's prerogative (as you can see from my sig I use VBN's rom and it's perfect for me).

Try to move a folder called Android from sd card to another folder or delete it and it should help. It worked in my case. Good luck!

has someone hear find an answer?

given up
I have tried many combos and radios and still stucked at green htc loading logo now i am just hoping for nand. strange thing its the volume down and end does not bring bootloader anymore.

[Q] HELP unstable radio / network

Hi folks, Basically I want to be able to use both WinMo and Android (SD) but can't find a stable solution.
I have upgraded my WinMo to 3.14.xxxx and so the Radio is also updated too. But when In Android I get a lot of freezes etc when doing network stuff (sometimes in Weather, mostly when downloading apps in Market).
I have tried various Radio's and Rom Versions, but it still isn't very un-stable.
Currently my Radio is 2.15.50.14 - which should be fine with Android.
My last clear down last night I did the following.
1) dropped my Win OS back to 1.72... (so I could load HSPL for Task 29)
2) loaded HSPL2
3) ran Task 29
4) loaded 3.14..... (but obviously HSPL is still on)
5) removed HSPL back to SPL delivered
6) loaded 3.14... again so I could get SPL 3.03...
Then I tried Android and still it frooze :-(
Does anyone have any suggestions?
Thanks in advance
Tony

I have same problems like you when using android now convert it to wp7 its better now (not locking especially(i couldn't wake the phone with power button with different android roms typhooon cyanogen, motoman,cmylxgo )radio rom same 2.15.50.14)with wp7 its continue signal strength changing but not locking now.

canawar said:
I have same problems like you when using android now convert it to wp7 its better now (not locking especially(i couldn't wake the phone with power button with different android roms typhooon cyanogen, motoman,cmylxgo )radio rom same 2.15.50.14)with wp7 its continue signal strength changing but not locking now.
Click to expand...
Click to collapse
Are you saying your Android is more stable with WP7 as the base?
Although I say WinMobile is more stable than android, its not totally stable.
For example I just finished a call and then the phone rebooted.
any other suggestions?
is my phone defective?

TonyOCL said:
Are you saying your Android is more stable with WP7 as the base?
Although I say WinMobile is more stable than android, its not totally stable.
For example I just finished a call and then the phone rebooted.
any other suggestions?
is my phone defective?
Click to expand...
Click to collapse
Are there no suggestions ;-(

Unless you need a dual boot, then go for a Android nand build, slow to boot, but there are now some fast stable nand builds. I recomment the version in my sig, but version 1.4 will be rekleased soon try that. Its a full nand install, simple instructions, and ofcours if you don't like it just task 29 and choose something else

johnerz said:
Unless you need a dual boot, then go for a Android nand build, slow to boot, but there are now some fast stable nand builds. I recomment the version in my sig, but version 1.4 will be rekleased soon try that. Its a full nand install, simple instructions, and ofcours if you don't like it just task 29 and choose something else
Click to expand...
Click to collapse
I may do this this weekend.
When you say slow to boot.. can you tell me how long in seconds to get to the home screen?
Thanks

TonyOCL said:
I may do this this weekend.
When you say slow to boot.. can you tell me how long in seconds to get to the home screen?
Thanks
Click to expand...
Click to collapse
First flash will take a while, like 5 minutes, but after that it takes a minute or less for my phone to boot. Its actually quite fast.

[Q] Newly registered newbie

I have a HD2 that I plan on installing Android on (currently WinMo 6.5), as it's cheaper, I hope, than buying a new phone. I have a step by step guide to follow, along with all the files I need, like HSPL3, MGLDR, and CWM, etc. All I need now is the ROM build. My confusion lies in the fact that the ones I look at seem to be for US T-Mobile HD2's, and mine is an unbranded UK model. I also keep seeing references to LEO512 or LEO1024? I'm pretty sure what I want is on here, but the sheer number of threads/posts will take me forever to work through! Can some kind soul point me in the right direction and I'll take it from there? Thanks.

With the ported android roms you havent to fear to destroy your device flashing a wrong rom.
This issue is only related to wm 6.5 roms/radios.
...you only have to decide if you want to throw wm6.5 away and use a nand build or keep wm6.5 and use a sd build.

Experience
From experience I'd recommend Typhoon rom
link= http://forum.xda-developers.com/showthread.php?t=933951
Also the hyperdroid GBX
link=http://forum.xda-developers.com/showthread.php?t=918899
These are one of the best!! Good luck
Click the thanks button if i helped

In quadrant I got only 1200 Score even when i OC to 1,2 Ghz. Why is my score so low?

Above, off topic or what?
Ok. Just watched a video of the HyperDroid install, looks pretty straight forward. But it doesn't have the Sense UI, which I like. CyanogenMod 7 doesn't appear to have it either? (I also don't see the link to the download for CM7 either, but I'm guessing I'm stupid or blind?)

you want any rom that supports the eu leo with 512 in the title

DK63 said:
I have a HD2 that I plan on installing Android on (currently WinMo 6.5), as it's cheaper, I hope, than buying a new phone. I have a step by step guide to follow, along with all the files I need, like HSPL3, MGLDR, and CWM, etc. All I need now is the ROM build. My confusion lies in the fact that the ones I look at seem to be for US T-Mobile HD2's, and mine is an unbranded UK model. I also keep seeing references to LEO512 or LEO1024? I'm pretty sure what I want is on here, but the sheer number of threads/posts will take me forever to work through! Can some kind soul point me in the right direction and I'll take it from there? Thanks.
Click to expand...
Click to collapse
Hey,
1st of all welcome, 2nd - be prepared... android can be very addictive.
As for your questions, LEO512 = European with 512mb rom (which you have) & LEO1024 = tmoUS with 1024mb rom.
If you prefer sense based roms you wont really go wrong with any build from Rafpina, imilka, Sergio76 or cmylxgo. Tho ive found RAFDROID HD builds are very stable & fast, also very straight forward to setup (tho there is NO Best rom id say this is a good starting point)
http://forum.xda-developers.com/showthread.php?t=908528
Enjoy

kam333 said:
Hey,
1st of all welcome, 2nd - be prepared... android can be very addictive.
As for your questions, LEO512 = European with 512mb rom (which you have) & LEO1024 = tmoUS with 1024mb rom.
If you prefer sense based roms you wont really go wrong with any build from Rafpina, imilka, Sergio76 or cmylxgo. Tho ive found RAFDROID HD builds are very stable & fast, also very straight forward to setup (tho there is NO Best rom id say this is a good starting point)
http://forum.xda-developers.com/showthread.php?t=908528
Enjoy
Click to expand...
Click to collapse
Hi,
+ 1 for this post.
Check also here :
http://android.hd2roms.com/

kam333 said:
Hey,
1st of all welcome, 2nd - be prepared... android can be very addictive.
As for your questions, LEO512 = European with 512mb rom (which you have) & LEO1024 = tmoUS with 1024mb rom.
If you prefer sense based roms you wont really go wrong with any build from Rafpina, imilka, Sergio76 or cmylxgo. Tho ive found RAFDROID HD builds are very stable & fast, also very straight forward to setup (tho there is NO Best rom id say this is a good starting point)
http://forum.xda-developers.com/showthread.php?t=908528
Enjoy
Click to expand...
Click to collapse
Yup 2nd that !
Rafdroid is still my favorite everyday build because of the sense widgets which show my emails, news etc on the 'desktop'.
Just about everything works in that build and is a perfect step from WM to Android.
First I would have a go with Android on the SD-card as it also works like it should and should be extreemly simple if you have a correct radio (ver 2,08 and above I thought). Should be easy to check in the software version tab all the way on the right hand side I believe.
After playing with it you can still decide if you want to go natively Android or not.
There are backup tools like Titanium pro which are worth the money.
I betcha will also enjoy the Android market!
And .... welcome to the group!

Thanks for the welcome.
I've decided I'll wipe and install to the Nand memory, I already have a Hero and love Android and the way I can customise it. Will try the process tonight.

Ok. Been at this for a while now, but I'm stumped.
Step one was install HSPL3. Went without a hiccup, no problems.
Step 2 was to install the radio. Chose EUradio (radio leo 5.15.50.14). However, I've tried half a dozen times, Windows says I am connected and I get to the HTC screen with a progress bar but then after 2-3 mins, I get an error message saying there is no communication.
Have tried:
1. different usb ports
2. loading into bootloader screen (coloured bars). Initially it says serial but then switches to USB after a short while. Tried from there, no luck.
3. rebooted the pc, and phone multiple times.
I did a search on the forum for 'no USB communication' but I get different threads bouncing about, none getting the same as me. Any ideas welcomed.

DK63 said:
Thanks for the welcome.
I've decided I'll wipe and install to the Nand memory, I already have a Hero and love Android and the way I can customise it. Will try the process tonight.
Click to expand...
Click to collapse
If you want to use ROM Manager with hour HD2 you will have to use cLK for your custom Android bootloader and not MAGLDR. Go and check out the "ROM Manager Now Supports HD2" thread and you can get more info on it there, it os a short bit accurate tutorial post on page two of the thread, it is only three pages right now anyway so not a lot of reading to do.

DK63 said:
Ok. Been at this for a while now, but I'm stumped.
Step one was install HSPL3. Went without a hiccup, no problems.
Step 2 was to install the radio. Chose EUradio (radio leo 5.15.50.14). However, I've tried half a dozen times, Windows says I am connected and I get to the HTC screen with a progress bar but then after 2-3 mins, I get an error message saying there is no communication.
Have tried:
1. different usb ports
2. loading into bootloader screen (coloured bars). Initially it says serial but then switches to USB after a short while. Tried from there, no luck.
3. rebooted the pc, and phone multiple times.
I did a search on the forum for 'no USB communication' but I get different threads bouncing about, none getting the same as me. Any ideas welcomed.
Click to expand...
Click to collapse
Do you have the latest version of ActiveSync or WMDC, depending on what Windows your computer uses, installed on your computer? You need the most upcto sate versions of these to flash straight through bootloader.

T-Macgnolia said:
If you want to use ROM Manager with hour HD2 you will have to use cLK for your custom Android bootloader and not MAGLDR. Go and check out the "ROM Manager Now Supports HD2" thread and you can get more info on it there, it os a short bit accurate tutorial post on page two of the thread, it is only three pages right now anyway so not a lot of reading to do.
Click to expand...
Click to collapse
Thanks, but I've not even reached that part yet. The tutorial I'm following is:
1/ Install HSPL3
2/ Install radio
3/ Install MGLDR
4/ Install CWM
5/ Install Android
I'm currently stuck on step 2.
T-Macgnolia said:
Do you have the latest version of ActiveSync or WMDC, depending on what Windows your computer uses, installed on your computer? You need the most upcto sate versions of these to flash straight through bootloader.
Click to expand...
Click to collapse
Yes. I'm running Win7 x64, everything is up to date. I did read you are supposed to turn off any antivirus? I'm using M$ Security Essentials. Would this affect it?

DK63 said:
Ok. Been at this for a while now, but I'm stumped.
Step one was install HSPL3. Went without a hiccup, no problems.
Step 2 was to install the radio. Chose EUradio (radio leo 5.15.50.14). However, I've tried half a dozen times, Windows says I am connected and I get to the HTC screen with a progress bar but then after 2-3 mins, I get an error message saying there is no communication.
Have tried:
1. different usb ports
2. loading into bootloader screen (coloured bars). Initially it says serial but then switches to USB after a short while. Tried from there, no luck.
3. rebooted the pc, and phone multiple times.
I did a search on the forum for 'no USB communication' but I get different threads bouncing about, none getting the same as me. Any ideas welcomed.
Click to expand...
Click to collapse
Hi,
You should be using :
radio version 2.15.50.14,which you can get here:
http://www.multiupload.com/QP0IWGY42F
"Initially it says serial but then switches to USB after a short while."
When it changes to USB ,that is the time to start flashing the radio.

Forgot to ask earlier, should I be removing the sim card while doing this? I've been putting in a spare one so I don't affect my 'real' one.

DK63 said:
Forgot to ask earlier, should I be removing the sim card while doing this? I've been putting in a spare one so I don't affect my 'real' one.
Click to expand...
Click to collapse
It should not make any difference.
I never take mine out when I change ROMS etc.

malybru said:
Hi,
You should be using :
radio version 2.15.50.14,which you can get here:
http://www.multiupload.com/QP0IWGY42F
"Initially it says serial but then switches to USB after a short while."
When it changes to USB ,that is the time to start flashing the radio.
Click to expand...
Click to collapse
My apologies. It was a typo error earlier. I have been trying 2.15.50.14, it failed so I tried 2.08.50.05 + task29. Neither worked. Just downloaded from the link you posted, in case my file was corrupt, exactly the same, comms error (Error 262).

DK63 said:
My apologies. It was a typo error earlier. I have been trying 2.15.50.14, it failed so I tried 2.08.50.05 + task29. Neither worked. Just downloaded from the link you posted, in case my file was corrupt, exactly the same, comms error (Error 262).
Click to expand...
Click to collapse
Ok,
Let's start again.
1.task 29 (get rid of old ROM)
2.Try to find HSPL4 and install
3.radio 2.15.50.14
4.MGLDR
See if that works...

malybru said:
Ok,
Let's start again.
1.task 29 (get rid of old ROM)
2.Try to find HSPL4 and install
3.radio 2.15.50.14
4.MGLDR
See if that works...
Click to expand...
Click to collapse
No. Still wont work. Will not run task29, get the same 'Error 262'..
As it was bought sim free, could there be something on it blocking the software? Or on my pc?

[Q] Task 29 problem

I'm sorry i know it's against the rules to be starting a new thread but it's been a week i've been asking for help and no one noticed. This is just a try to come noticed.
I installed task 29 on my blackstone. I had olinex 1.56 installed and later did the task29 with radio 1.13, 1.14 and 1.17 After successfully doing it i went on step 2 that is installing a clean rom. I tried these roms
blackSTONEhengeHyPerSlim_4_1
RUU_TOUCH_HD_MARYONE_23148_WWE_191110
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship(3)
They get installed but after i store the contacts and everything it gets stuck if kept for like half an hr. The screen doesn't respond but power button and the volume button works.
I took my phone to a repair center and they couldn't fix it. So please help me i've just got only one phone.
I don't mean to offend any moderators by this but i'm just asking for your help. Thank You

Try reinstalling stock ROM after Task 29.
Restore ONLY contacts, and then try using device for several days.
DO NOT install any other software!!!
If it works, then problem is in some data or software you're restoring.
If not, restore original SPL and original ROM and try again.
If it does not work... and service can not help you... then sorry...

Hello i did reinstall the stock rom after task 29 and i was using pimbackup for restoring but that freezed my phone so i installed the stock rom again and thought of not using it. Did that but nothing much helped.
I hope believe these are the correct shipped roms
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship(3)
Everything on xda has worked like wonders for me. Be it android on any other rom but right after task29 nothing seems to be working on my phone.
One thing i've noticed after installing any rom after task29 is if i get to the bootloader it gets me to a 1 sec white screen saying no image found. I hope what's causing a problem.

Do you understand WHAT Task 29 is?
It formats the partition drive of your device where the ROM resides. Meaning, it wipes any data regarding ROM.
So of course it would say "No image found".
I don't know which ROM is stock for your device. Try to update ROM via HTC site.
If lucky, it will suggest / let you find adequate ROM.
For my device it's 1.56.407.2 (German)!
If unlucky, it will say "Not supported" or something like that - then go for Orange 1.59.61.2 ROM.
And you might try one 1.5x ROM flash WITHOUT Task 29...

Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.

Thanks will do it and keep yu updated with it..

simplistian said:
Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.
Click to expand...
Click to collapse
Thanks i tried installing the stock rom like you told me but then got stuck on the screen alignment screen. I later installed blackSTONEhengeHyPerSlim_4_1 and now it's responding to every touch. Thanks alot. I hope this stays like this and yes instead of restoring i forwarded all the contacts through bluetooth. Owe you a BiiiiiiiiiiiiG thanks..

Too soon to be happy as same again..I don't think there should be a problem with touch as it works fine for first 1hr but right after something gets stored by something i mean contacts it stops reponding after sometime. The volume and power button work all fine. I can't make out the problem. Any ideas or suggestions. Shall i make a video and post ??

FIRST you have to make it work with factory settings - stock SPL and stock ROM.
After that flash what you like...

I think you have to follow Bodisson's suggestion, do everything as stock and retest without restoring anything. If it still failed...... you should have it repaired
Good luck!!

I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...

Bodisson said:
I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...
Click to expand...
Click to collapse
Glad to see somebody researching things out and settling on a radio he prefers due to performance rather than those just going for latest

I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.

kulwant said:
I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.
Click to expand...
Click to collapse
All rom's should work with each radio to be honest. Glad your device is working better, though still a little baffled why you're still having difficulties
EDIT - You are on a wm6.1 rom. Is the rom based on 1.56+, if not you may need to revert to HSPL 1.14

I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers

kulwant said:
I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers
Click to expand...
Click to collapse
I'm baffled but still want to get to the bottom of your issue and would appreciate any help from other members who may have idea's on how to solve your issue. From what I've read everything you have done is correct, but I don't like being stumped!!
If we start from the start, we may get to the bottom of this........

Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.

kulwant said:
Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.
Click to expand...
Click to collapse
Well as you know a T29 formats device so you need to flash a rom or you'll be stuck at boot screen. Before you do a T29 it states you must have HSPL on your device first. Now from what I've read you did have HSPL on first and your T29 worked as you where stuck at boot screen afterwards.
I'm assuming you turned device off, booted into bootloader then flashed youir rom (blackSTONEhengeHyPerSlim_4_1) which is based on 1.56+ as was your HSPL.
This all seems correct so I'm not sure what went wrong.
Is above all correct?
Did you try a T29 again and flash different rom or did you just flash different rom over existing?

I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.

kulwant said:
I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.
Click to expand...
Click to collapse
Right, I never put any files in same folder as it only confuses flashing process and can cause issues. I.e. put T29 in its own folder, radio 1.14 in its own folder and then rom in another folder.
Do a T29 and when its complete, I.e. stuck in smart mobility screen. Then you take out battery to turn phone off. After this put phone into bootloader and flash rom. Then flash radio after it as a lot of roms have a radio file included
...........................
Sent from the improved version of Tapatalk, better known as Forum Runner

[Q] Is my HD2 dead ? :((

Hi guys, i dont know what happened but since i have put the android NAND on my phone it stops responding. in MAGLR i kept getting FATAL1E error. So fine i decided i will come back to windows 6.5.. i have installed 3.66 officail one and same things keep happening. It will sometimes boot sometimes it wont. It will boot but it wil hard reset instantly. Exacly the same as it was on android. I think it might be broken physicly. I dunno RAM, ROM, CPU ? Any way of checking it ? I dont want to say goodbye to my Leo
Thanks for help

viperek027 said:
Hi guys, i dont know what happened but since i have put the android NAND on my phone it stops responding. in MAGLR i kept getting FATAL1E error. So fine i decided i will come back to windows 6.5.. i have installed 3.66 officail one and same things keep happening. It will sometimes boot sometimes it wont. It will boot but it wil hard reset instantly. Exacly the same as it was on android. I think it might be broken physicly. I dunno RAM, ROM, CPU ? Any way of checking it ? I dont want to say goodbye to my Leo
Thanks for help
Click to expand...
Click to collapse
Either a hardware issue or something in NAND causing it.
Here's what I'd do.
1) Flash HSPL if you went back to stock SPL
2) Flash Task29
3) reflash MAGLDR or Stock ROM.
The key here was task29 which will completely erase your NAND so there is nothing left over to mess you up. If it still gives you issues after this I would think hardware.

orangekid said:
Either a hardware issue or something in NAND causing it.
Here's what I'd do.
1) Flash HSPL if you went back to stock SPL
2) Flash Task29
3) reflash MAGLDR or Stock ROM.
The key here was task29 which will completely erase your NAND so there is nothing left over to mess you up. If it still gives you issues after this I would think hardware.
Click to expand...
Click to collapse
Thanks for quick replay. I remmember when i was first playing about with android i thinks something messed up the HSPL. The current one i got is SPL-2.08.HSPL 8G XE. Dont know if its the one i should have. ALso when i flash winmo i did it over the cable not straight from the SD card. So im not sure if it has changed SPL. I did use Task29

viperek027 said:
Thanks for quick replay. I remmember when i was first playing about with android i thinks something messed up the HSPL. The current one i got is SPL-2.08.HSPL 8G XE. Dont know if its the one i should have. ALso when i flash winmo i did it over the cable not straight from the SD card. So im not sure if it has changed SPL. I did use Task29
Click to expand...
Click to collapse
Download the HD2 Tools from the sticky topic in the Android NAND section and use it to do a clean install.
Bootloader>Task29>Bootloader>HSPL>Bootloader>MAGLDR

TheATHEiST said:
Download the HD2 Tools from the sticky topic in the Android NAND section and use it to do a clean install.
Bootloader>Task29>Bootloader>HSPL>Bootloader>MAGLDR
Click to expand...
Click to collapse
Yeah but you may not be able to flash task29 without HSPL installed first since task29 is not an official ROM, so you may have to flash HSPL first then task29 then magldr.

hmm this is very strange. Suprisingly after loading the newest ROM and SPL 3.. something with it from the SD card all the problems dissapear. But When i start playing with Hard SPL and MAGLRD it just keeps freezing and kind of overheating. Still keep getting E1 FATAL ERROR. Dunno what its for but my guess is that parts of my memory are broken and it causes data to corrupt. Anyone had situation like that ? Guess i will be stuck on Winmo

viperek027 said:
hmm this is very strange. Suprisingly after loading the newest ROM and SPL 3.. something with it from the SD card all the problems dissapear. But When i start playing with Hard SPL and MAGLRD it just keeps freezing and kind of overheating. Still keep getting E1 FATAL ERROR. Dunno what its for but my guess is that parts of my memory are broken and it causes data to corrupt. Anyone had situation like that ? Guess i will be stuck on Winmo
Click to expand...
Click to collapse
Have you done the task29 like I suggested?

orangekid said:
Have you done the task29 like I suggested?
Click to expand...
Click to collapse
yes i have

just if anyone is interested i have solved the problem. For some reason i think the HSPL did not want to work propley. So i have installed HSPL 4 on my 3.03 SPL and then installed clK. After that i have managed to install Clockwork and then NAND clK Typhoon one. Now everything boots up and works like a charm. No issues with overheating and freezing. Thanks to all involved

Well done VipereK027, and thanks for updating us with your solution.