Related
Ok so I originally rooted my phone and put Fresh ROM on it, there was a little hiccup in the install but I didnt really think much of it, recently when I tried to flash a new ROM (I tried multiple ones just to be sure it wasn't the rom) but whenever I try to flash the ROM (using clockworkmod from recovery mode) it will say the install was successful but when I reboot it will do one of two things: stay on the "HTC EVO 4G" startup screen or continue to turn off and on like its in a bootloop. Does anyone have any ideas whats happening and what I should do? I have tried clearing/wiping all of the options that are available in clockworkmod and even tried using a new SD Card but it still does the same thing
guribe94 said:
Ok so I originally rooted my phone and put Fresh ROM on it, there was a little hiccup in the install but I didnt really think much of it, recently when I tried to flash a new ROM (I tried multiple ones just to be sure it wasn't the rom) but whenever I try to flash the ROM (using clockworkmod from recovery mode) it will say the install was successful but when I reboot it will do one of two things: stay on the "HTC EVO 4G" startup screen or continue to turn off and on like its in a bootloop. Does anyone have any ideas whats happening and what I should do? I have tried clearing/wiping all of the options that are available in clockworkmod and even tried using a new SD Card but it still does the same thing
Click to expand...
Click to collapse
Hi there. First off, I need a little more info, like which rom you are trying to flash right now. Also, what radio's and pri do you currently have?(menu>settings>about phone>software info, radio is baseband) If you have the older radio and PRI, (same as the ones in my sig), and you are flashing to a 3.70 software ROM, which most likely you are, you will need to either flash a custom kernel, while in recovery, just after flashing the rom (before you boot). Or upgrade your radios. If you have already updated your radios, and you're still experiencing this, I would first and foremost, switch to Amon Ra recovery (which version of clockwork are you on, btw?). The easiest way to switch to Amon Ra, is to get Rom Manager from the market. Use rom manager to "flash clockworkmod reocovery" (even though you already have clockwork, do this) Then scroll down, and you'll see "flash alternate recovery". Select that, and let it flash Amon Ra for you. Shut the phone down, and manually boot into recovery (vol down+power). Use amon's recovery to do a full wipe, (data, cache, davlik cache x3) Then flash calkulin's format all.zip. That will ensure a good wipe. Then follow my above mentioned instructions, and try again. That should work. If it doesn't, report what the exact errors are here. Good luck
Maybe this is a stupid question, but are you able to nand restore to a rom where your phone will actually boot up?
Calkulin format all zip is your best bet. It will wipe your system data, data, cache and dalvik cache. A full purge.
Just have a good zip like chris sprint lovers rom. And better yet a PC36100.zip from chris all in one update thread.
Sent by my eVo running Vin255764 Plutonium...yup
Here's a few suggestion:
Change your radio version - Some kernels don't work right with the newest, and some don't work right with older ones.
Change your kernel - This is always the best suggestion IMO. For a sense based ROM run one of netarchy's latest kernels. Often a bootloop is because of a kernel/radio issue.
Plus with netarchy and setcpu you'll get some wicked battery life.
Try wiping everything, and then try again. Also try flashing a different rom
having issues flashing myn rom
have 3.7 evo rooted unrevoked3/kernel 15
when i try to flash from clockwork mod it just blinks right quick but doesn't do anything.. all the things are up to date .. can anyone help?
when i flashed amon ra and flashed rom.. it says E: can't find update script..
i dl rom manager and did the alt recovery to amon ra. it still won't flash the rom.. but now i have another problem.. my sd card clockwork back up is not there... and now i can't restore to previous state. i can't get to the regular phone interface. what can i do to restore?
Okay, so where to start...
I have a MT4G (of course) i love it dont get me wrongand wanted to mess around with it. i permarooted it via VISONary + and everything was working fine. i wanted to flash a different kernal and wanted to do a nandoird backup before i did anything else. but i needed clockwork to do this (correct me please if im wrong) so i downloaded rom manager flashed it. and went to boot into recovery and it does this icon with a phone and a "!" on the screen...it cant boot into recovery. and i dont know why, and now i just want to go back to my stock recovery but i cant cause i dont know how. ive tried terminal commands... and i tried to learn adb and fastboot but am very lost. basically i want a nandroid of my rooted stock ROM... any help would be much appreciated
The reason is because you need to turn s=off for any of those to work.
Sent from my LogicPD Zoom2 using Tapatalk
how do i do that?
drpepper4lf said:
how do i do that?
Click to expand...
Click to collapse
Read the guides.
1. The phone with the red triangle icon is from the stock Recovery program. Stock recovery does nothing except show you that screen, unless a special file is found on the SD card, used for a complete system restore. Your flash of ClockworkMod Recovery was unsuccessful.
2. When you do go get past the S=Off phase, and are ready to once again attempt to install CWM Recovery, be sure you install the CORRECT version. CWMR 3.0.0.5 is for Gingerbread (Android 2.3) based ROMs only! Don't install 3.0.0.5 expecting it to function properly for the Stock ROM, for Iced Glacier, or any other Froyo (Android 2.2) based ROMs. Those all require CWMR 2.x. A higher version number does not mean better. For example, if you are planning to install CM7, back up with CWMR 2.x, then flash CWMR 3.x before installing CM7.
(There is a special, unique to MT4G version of CWMR that handles both Froyo and Gingerbread ROMs, called "3.0.0.6". You can find threads on it in the Development subforum.)
Hello. i am new to the android family
i have a nexus s GT-9020T
i have rooted my phone but without setting the clockworkmod reovery.
today i was playing with the rom manager and downloaded one of the rom from the list. after installation i was unable to start the phone only seeing the google logo with the unlock logo.
i went back into the recovery by typing flash recovery recovery.img etc.
run a restore and restart the phone but still not work
my nexus s is 2.3.4 by the way.
please assist
What "restore" did you run?
Go here: http://forum.xda-developers.com/showthread.php?t=1056062
And download the full rom:
Model: i9020T
Full Rom: GRJ22, KD1
That'll revert your Nexus S to the latest completely stock 2.3.4
Then you can flash recovery again and go back to clockwork mod and go flash another rom or whatever.
Remember when you're flashing a new rom you need to wipe data and cache and dalvik cache.
i run an restore from the backup that i made before installing the new rom using clockwork mod recovery, its part of the option when installing the rom using the rom manager * click box - backup * etc something like that
sheunghko said:
i run an restore from the backup that i made before installing the new rom using clockwork mod recovery, its part of the option when installing the rom using the rom manager * click box - backup * etc something like that
Click to expand...
Click to collapse
Next time don't use Rom Manager to make backups or flash roms. It's stupid and can get you issues like you're having.
Anyways, try wiping data and cache then restoring the backup, do it in Clockwork Recovery.
Let it boot, first boot always takes a while, 5-10 minutes. If you see the boot animation freeze, stop and restart, then yeah it's screwed up, otherwise, just let it is.
If still not working from your backup, do what I said in previous reply, just restore to stock 2.3.4 then re flash clockwork mod and start over with the rom you want to flash.
thank your nxt. i have found the real problem. it was not my backup problem or the rom that u provided. it was the version of my clockwork mod recovery. i was using an 2.x.x.x to restore the phone which is why it doesn't work. everything work fine now after i flashed with an 3.x.x.x and restore the phone. one question thou, where can i always find the newest clockwork mod recovery release ? thank you very much
sheunghko said:
thank your nxt. i have found the real problem. it was not my backup problem or the rom that u provided. it was the version of my clockwork mod recovery. i was using an 2.x.x.x to restore the phone which is why it doesn't work. everything work fine now after i flashed with an 3.x.x.x and restore the phone. one question thou, where can i always find the newest clockwork mod recovery release ? thank you very much
Click to expand...
Click to collapse
http://mirrorbrain.cyanogenmod.com/cm/recoveries/
Or just use ROM Manager to get the latest.
That's the only thing I use ROM Manager for... getting the latest Recovery.
thanks again nxt. if you don't mind really ...i have one more question. i know the phone intend to uninstall clockwork mod recovery once its restarted. i know there is command type into the cmd to avoid the phone uninstall the clockworkmod reovery and make it permanent in another word. I didn't run those command when i root my phone because i don't know if its good to make it permanent like.... hmmm like if there will be a 2.3.5 coming next month..just saying ok... with a permanent unofficial recovery will cause a problem?
sheunghko said:
thanks again nxt. if you don't mind really ...i have one more question. i know the phone intend to uninstall clockwork mod recovery once its restarted. i know there is command type into the cmd to avoid the phone uninstall the clockworkmod reovery and make it permanent in another word. I didn't run those command when i root my phone because i don't know if its good to make it permanent like.... hmmm like if there will be a 2.3.5 coming next month..just saying ok... with a permanent unofficial recovery will cause a problem?
Click to expand...
Click to collapse
Are you running custom ROM? If you are, it's already made to not revert back to stock recovery. If you leave it stock recovery you'll get notifications for firmware updates by Google, but remember that applying those to a rooted phone might screw things up too.
the blue one is stock recovery right?
sheunghko said:
the blue one is stock recovery right?
Click to expand...
Click to collapse
Don't remember. It should only have like 3-4 options.
thanks again nxt. no i am not running an custom rom. i mean not yet. i planed to try one from the rom manager download section then my phone couldn't start after installation and now i have restored my phone from my backup using the clockwork mod recovery 3.x.x.x.
in teamwin official website i couldn't find twrp recovery support for motorola bravo, however motorola defy was in the list to get twrp recovery.
does TWRP for defy work on bravo? or we need a different for bravo? i love that recovery ...can some body help me install that on my bravo???
hiandro said:
in teamwin official website i couldn't find twrp recovery support for motorola bravo, however motorola defy was in the list to get twrp recovery.
does TWRP for defy work on bravo? or we need a different for bravo? i love that recovery ...can some body help me install that on my bravo???
Click to expand...
Click to collapse
The Defy TWRP works on the Bravo, but its only up to version 2.1 and can't install large Aroma roms (WR, Pikachu, etc). Your better off reading the thread over at Defy Development. Its neat and works, but our custom CWM 5 is the best for us in terms of reliability and stability.
skeevy420 said:
The Defy TWRP works on the Bravo, but its only up to version 2.1 and can't install large Aroma roms (WR, Pikachu, etc). Your better off reading the thread over at Defy Development. Its neat and works, but our custom CWM 5 is the best for us in terms of reliability and stability.
Click to expand...
Click to collapse
can u give me link to download latest CWM please.
hiandro said:
can u give me link to download latest CWM please.
Click to expand...
Click to collapse
Its installed be default with CM10 or PA. The newer the rom, the newer the recovery.
You can copy the zip/system/bootmenu/.... to other roms to get the touch ui in the bootmenu, just don't overwrite your current roms init scripts....and use a PRE 2nd Kernel zip when porting the bootmenu to non custom kernel roms. This isn't something I'd advise doing cause if you don't know what your fully doing you can easily put yourself in a position to flash the sbf. I sbf'd 3 times adding the JB Touch bootmenu to CM7.
skeevy420 said:
Its installed be default with CM10 or PA. The newer the rom, the newer the recovery.
You can copy the zip/system/bootmenu/.... to other roms to get the touch ui in the bootmenu, just don't overwrite your current roms init scripts....and use a PRE 2nd Kernel zip when porting the bootmenu to non custom kernel roms. This isn't something I'd advise doing cause if you don't know what your fully doing you can easily put yourself in a position to flash the sbf. I sbf'd 3 times adding the JB Touch bootmenu to CM7.
Click to expand...
Click to collapse
I installed cm10 then after I went to stable recovery and I wipe data/factory reset and then wipe cache and again wipe dalvik cache,and then I went to install zip from SD card and then choose mokee and flashed the zip.and when I reboot the phone it got stuck at Motorola red logo. again i boot into recovery (it was different, which mokee installed maybe)and when i wipe data and cache it said something like this:can't mount E/cache/recovery/log .and then i went to backup and restore and restored my cm10 backup and it only restored system(no data) why did this happen did I did something wrong?? or is there problem in recovery?? please tell me about this.
hiandro said:
I installed cm10 then after I went to stable recovery and I wipe data/factory reset and then wipe cache and again wipe dalvik cache,and then I went to install zip from SD card and then choose mokee and flashed the zip.and when I reboot the phone it got stuck at Motorola red logo. again i boot into recovery (it was different, which mokee installed maybe)and when i wipe data and cache it said something like this:can't mount E/cache/recovery/log .and then i went to backup and restore and restored my cm10 backup and it only restored system(no data) why did this happen did I did something wrong?? or is there problem in recovery?? please tell me about this.
Click to expand...
Click to collapse
I have a couple of ideas, but I'd be guessing with all of them. Probably just an error from CM10 using a newer recovery than Mokee. Since CM10's /system was restored, so was its bootmenu\recovery -- try doing a full restore now that you're using the same recovery that backed it up .
Crap like this is why we need an unlocked bootloader, or even just a place to hide a custom recovery -- with every rom you flash, your recovery changes and bad things can\have happened. While its nowhere as bad as it once was, problems like yours still occur from time to time. Its the same reason that there's so many posts with people having problems from using BandroidX Recovery -- its a very old CWM based recovery that uses different formats than whats used now (can't even install newer roms with it). Old and new don't usually play nicely with us .
skeevy420 said:
I have a couple of ideas, but I'd be guessing with all of them. Probably just an error from CM10 using a newer recovery than Mokee. Since CM10's /system was restored, so was its bootmenu\recovery -- try doing a full restore now that you're using the same recovery that backed it up .
Crap like this is why we need an unlocked bootloader, or even just a place to hide a custom recovery -- with every rom you flash, your recovery changes and bad things can\have happened. While its nowhere as bad as it once was, problems like yours still occur from time to time. Its the same reason that there's so many posts with people having problems from using BandroidX Recovery -- its a very old CWM based recovery that uses different formats than whats used now (can't even install newer roms with it). Old and new don't usually play nicely with us .
Click to expand...
Click to collapse
Yeah, i tried to restore backup using cm10 recovery and although it said cant restore .android.secure something like that(iam not quite sure) it restored system as well as data.
The thing is i like mokee os .its speed, clean and clear... ecetra but it is not jelly bean.can't we have a cm10 tweaked and modified for bravo.of course I love your PA jelly bean there are lots of tablet tweaks can you also add some other functions like in pimp my rom.
And thanks man for answering my queries
Hi,
I installed CWM v6.0.5.3 from the CM11 thread here onto my rooted stock rom so that I could do a nandroid backup.
It installed OK and I did the backup but now it always boots into CWM!
When I select "reboot system now" it also complains that "root access it missing". Selecting yes to root device doesn't get rid of this message on subsequent boots.
I can still get into download mode and I can use Odin to re--flash stock rom which enables me to boot correctly, but then I've lost all my data. Ironically I only installed CWM to do a backup and I don't have any other backup!
I can see other threads with similar problems but they're on other devices and the fix.zip's don't work on the Y.
I'd appreciate any help.
Regards,
Paul.
Some more info...
Even after flashing the stock ROM and re-installing CWM 6.0.5.3 I get the same issue.
I've tried using a temporary CWM v5 but this is unable to restore the backup.
Thanks...
Just thinking out loud now...
Is there a way to manually restore data.yaffs2.img from the backup without installing CWM 6.0.5.3?
It's not a problem. On flashing CWM 6.0.5.3 it converts the system to MTD from RFS which prevents it from booting due to lack of compatible ROM. CWM 6.0.5.3 can't be used with any GB or ICS ROM. It needs KK and for that you have to flash CM 11. Hope this helps.
pda1ey said:
Hi,
I installed CWM v6.0.5.3 from the CM11 thread here onto my rooted stock rom so that I could do a nandroid backup.
It installed OK and I did the backup but now it always boots into CWM!
When I select "reboot system now" it also complains that "root access it missing". Selecting yes to root device doesn't get rid of this message on subsequent boots.
I can still get into download mode and I can use Odin to re--flash stock rom which enables me to boot correctly, but then I've lost all my data. Ironically I only installed CWM to do a backup and I don't have any other backup!
I can see other threads with similar problems but they're on other devices and the fix.zip's don't work on the Y.
I'd appreciate any help.
Regards,
Paul.
Click to expand...
Click to collapse
You didn't install cwm6 - you flashed a kernel only meant for cm11 that has cwm6 built in - this kernel will not work on stock roms
Simply mount system then flash a stock based kernel like hells fusion #50
In future use cwm5 to make backups of stock roms - hells fusion kernel has it built in
Ah, and I thought I was being clever by going for the latest version!
I'll try flashing that kernel and let you know...
Hi,
From CWM 6.0.5.3 I mounted /system and installed hells fusion #50, but the phone still boots into CWM 6.0.5.3.
I tried also installing the stock kernel from the aroma installer, but still ended up in CWM 6.0.5.3.
Regards,
Paul
pda1ey said:
Hi,
From CWM 6.0.5.3 I mounted /system and installed hells fusion #50, but the phone still boots into CWM 6.0.5.3.
I tried also installing the stock kernel from the aroma installer, but still ended up in CWM 6.0.5.3.
Regards,
Paul
Click to expand...
Click to collapse
Maybe its a build.prop issue with the zip and not flashing it
Try flashing a stock kernel via odin like the following (place in pda)
http://d-h.st/18f
If not you will have to flash an entire stock rom firmware via odin
I tried flashing that kernel with Odin, but when I boot I just get stuck on the Samsung logo.
Thanks for your help and time, but it looks like the backup I took with v6 isn't of any use, and I'll have to start again from fresh.
But I might run with Hell's Fusion as that looks good!
The reason I started all this was because the phone keeps messing up whilst in a call e.g. putting the call on hold, or speaker. I've tested the proximity sensor and thats OK, so I was going to try a custom ROM to see if that cured the problem.
pda1ey said:
I tried flashing that kernel with Odin, but when I boot I just get stuck on the Samsung logo.
Thanks for your help and time, but it looks like the backup I took with v6 isn't of any use, and I'll have to start again from fresh.
But I might run with Hell's Fusion as that looks good!
The reason I started all this was because the phone keeps messing up whilst in a call e.g. putting the call on hold, or speaker. I've tested the proximity sensor and thats OK, so I was going to try a custom ROM to see if that cured the problem.
Click to expand...
Click to collapse
If you can get into recovery now it should be cwm5
You can try flashing hells fusion now and see if it boots - if not flash stock rom via odin
Where i can see the hell fusion #50