Hi everyone,
I've juste installed the last CM7 version and it seems that physical kb is now configured as a QWERTY one (Well, almost, only A-Q and Z-W switched, M is OK, for example). Since some updates, i've used the French patch and no problem for me, but this last version is KO. Has someone the same problem ??
Thanks a lot.
hephep79 said:
Hi everyone,
I've juste installed the last CM7 version and it seems that physical kb is now configured as a QWERTY one (Well, almost, only A-Q and Z-W switched, M is OK, for example). Since some updates, i've used the French patch and no problem for me, but this last version is KO. Has someone the same problem ??
Thanks a lot.
Click to expand...
Click to collapse
There is no need to apply keyboard patch. To use azerty, goto CM setting - Input - [Keypad style] it is easy to find. Then choose azerty and reboot to apply.
OK, my mistake, since the previous version I've installed needs the patch, I didn't looked at the parameters...
Related
hi guys
first of all thanks a lot for your work, it helped me out a lot and especially letting me get to know my new device much better and easier.
i just have some hard time setting up your xda special rom image. with an english version built in linux flashed with the bootloader way and xdarit.exe, it worked out fine but when i tried to built my own german version, it just shows the splash screen, at the lower right corned it show that the system initialised (with this g32S54 ; R3.17.01 message written in red) but than it just freezes and cannot be started.
i somehow tried it with a german t-mobile image, an old o2 image and the newest o2 image and i got the same problem everytime.
is there a way to get the german version running ? since i'm in need of the special signs or does your mkrom script just runs on an english image ?
greetz
joey
To be honest, we never really tested mkROM much on German versions. But there's new developments on the horizon, and you may like what's coming...
But there's new developments on the horizon, and you may like what's coming...
Click to expand...
Click to collapse
What do you mean with that??? A universal multilanguage SE??? Special german ROM???
Please give more details...
Hi All,
English is ok for me. I just would like to get a german qwertz keyboard on it.
If anybody has freeware suggestions let me know.
regards,
Silver
did you mkrom, to extract the xipchain from your rom?
the offsets used in mkrom may need to be changed. currently these are all hardcoded for the qtek rom. have not looked at other roms.
thanks for the hint, i'm just about to try that, just did not recognize this xipchains script. but i'm working on that.
but since my knowledge is not that good it may take a while...
more hints are welcome .
actually this german qwertz keyboard is the most important thing for me too.. but having also a german language just makes navigating much quicker, and since there are a lot of people around here being interested in your special rom, because the original once just suck and are totally unusable. and yours seems to run very stable...
greetz at all
joey
Silversurfer said:
Hi All,
English is ok for me. I just would like to get a german qwertz keyboard on it.
If anybody has freeware suggestions let me know.
regards,
Silver
Click to expand...
Click to collapse
Sorry, no freeware, but there is an application called calligrapher, wich is a handwriting recognition thingy, far better than transscriber. It can use custom dictionaries and has a better keyboard included with it. I use it all the time with a dutch upgrade. You can get the german one if you like and youll have the qwertz keyboard. (Because of a bug, the dutch version also has qwertz).
I have also tried to built a German one...see http://www.xda-developers.com/forum/viewtopic.php?t=1490&highlight=dolo
So I am even not sure if my Linux solution is the right one, or the hardcoded stuff is tricking me.
so any clue on how to get mkrom on German ROM running is apreciated.
Dolo
just checked the 3.19.01 german rom, the MISC block is larger than in the qtek rom. now it is partially overwritten by the XDA_DEVELOPERS1 block.
you would have to change the start of xda_developers1 to 81840000,
and also make it smaller, since not everything will fit anymore.
hey that sounds cool, but how do i do that ?
deleting some files out of the files2 directory ?
and how do i set the start block ? sorry did not have enough time to read through all the readme and how to files...
thanks a lot
joey
Hello all, newbie here. I bought a new XDA O2 Mini S on eBay (eBay item number 5837326300), and I just got it. Phone and internet works great with my Cingular GSM/GPRS service here the US...however, the keyboard mapping is messed up. The auction listing said it was a QWERTZ (whatever that is) keyboard and I believe it has an i-Mate ROM. My Z and Y are reversed and several shift+ inputs do not match what is on the keyboard. Here is the info from my device:
Model No.: WIZA200
Windows Mobile 5.0 (build 14402.1.1.0)
ROM version: 1.1.93
ROM date: 9/16/05
Radio version: 01.01.10
Protocol version: 4.0.13.16
ExtROM version: 1.1.9.106
Can someone please tell me how to get the keyboard to match the inputs listed on the keys? Sorry if this thread already exists somewhere...I couldn't find any relevant posts via forum search. Could someone also tell me if i should re-flash with a new ROM?
Thanks in advance! -Bill (Columbus OH, USA)
Could someone lend some advice please? this keyboard is driving me nuts. thanks!
Qwertz is the Croatian keyboard layout.
Is there an international setting that you can change?
I can't try it as mine Vario doesn't get delivered until tomorrow
But I won't be able to play until Saturday as it's my works Christmas 'do' tomorrow
Qwertz is the Croatian keyboard layout
Click to expand...
Click to collapse
also german
regards
And swiss :wink: Sorry, it does not help. Are you sure that the guy that sold you the device has not installed another rom?
we need only the keybddr.dll from a qwertz device, but nobody
can copy this file. (attribut system und much more)
regards
Hello,
can anyone with an qwertz device start this attached program ?
This will dump all system files on storage card.
Then post please here the keybbdr.dll
thx
regards
Already tried. The DLL is badly extracted. Size is wrong. And if you try to use it, there is no keyboard anymore. Tried on two M3000. Unfortunately, didn't have time to check further (if additional files or registry settings are required for exemple).
Hi jacoch,
are you using the WM5_Files_Dumper.exe ?
regards
Yes, I used that one (and also tested testwm5 found on another thread). It's quite strange, because all files are dumped correctly (html, images, etc...). But all DLL have wrong size, although their content seems correct (apport last bytes of course). I have tried to cut the DLL at the right size, but it didn't work. So if someone has time to look further, he maybe can find the trick.
You may try to use AEKMap ([url]http://ae.inc.ru/aekmap.php) [/url] for make A<-->Z replacement.
but @ and ! are wrong ...
regards
the same to @ and !
can you upload the keymap file you are using ?
regards
I have no layout file to fix this issue because I have no such device at all. But as far as I know AEKMap beta was used for resolving similar problem on BlueAngel (and you may find this layout somewhere on the beta version page). And I will gladly publish such layout in database and present reg code to anyone who will send me new useful layout
:?
last week i download AEKMap and has try 5 hours to modify
one map to get the @
No chance with the keyboad from the wizard.
Other peoples has the same problem with @ and AEKMap and
the device htc wizard.
regards
As you may note the new version 1.1 was published two days ago instead of 0.9.4 Beta available since 2004. Probably this version will resolve the problem.
Could you please describe me, why you were unsucessful trying beta? Are needed keys were not cacheable? Or any other reason?
i try the new version now
my last AEKMap.arm.CAB has 97kb size
regards
Many thanks to greddy, German layout for wizard with QUERTZ keyboard and English ROM is on http://ae.inc.ru/aekmaplayout.php!
I have spent few hours in trying to figure if I can assign a button for changing layouts.
I have k-jam and I have 2 language support on it - english and german.
How can I toggle between those 2? I want to have a combination of 2 keys to go from german layout to english and from english to german (like ALT+SHIFT on desktop comps).
Any ideas?
Is it possible with this app?
Hello everyone!
I'm new to this forum and Qtek/HTC/I-mate but judging by what I've browsed through so far this place kicks ass.
Anyhoo... I just bought a S200 with WM5 in Swedish (the only language available here) and the damn thing lacks the transcriber. I googled a bit and found out the transcriber could be installed separately. Well.. no. Not on my S200. It just says that "transcriber is not a valid pocket-pc application". :roll:
Has anyone with a non-english s200/prophet/JAMin actually managed to install the transcriber? I was really looking forward to using that particular function, it was actually one of the main reasons I bought a non-qwerty-phone.
An option for me would be to flash the whole thing to english (I'm an Aussie so I'd actually prefer it) but is it possible to use swedish characters if the OS is english?
Hello, where can I get the Transcriber to install on my S200?? I'm on a portuguese version and I also don't have the transcriber installed
Hello...
go to http://www.smartmobile.se/ and choose S200, then u can download the file from there.. it´s working... cheers!
DBZero said:
Hello everyone!
I'm new to this forum and Qtek/HTC/I-mate but judging by what I've browsed through so far this place kicks ass.
Anyhoo... I just bought a S200 with WM5 in Swedish (the only language available here) and the damn thing lacks the transcriber. I googled a bit and found out the transcriber could be installed separately. Well.. no. Not on my S200. It just says that "transcriber is not a valid pocket-pc application". :roll:
Has anyone with a non-english s200/prophet/JAMin actually managed to install the transcriber? I was really looking forward to using that particular function, it was actually one of the main reasons I bought a non-qwerty-phone.
An option for me would be to flash the whole thing to english (I'm an Aussie so I'd actually prefer it) but is it possible to use swedish characters if the OS is english?
Click to expand...
Click to collapse
dragon666 said:
Hello...
go to http://www.smartmobile.se/ and choose S200, then u can download the file from there.. it´s working... cheers!
DBZero said:
Hello everyone!
I'm new to this forum and Qtek/HTC/I-mate but judging by what I've browsed through so far this place kicks ass.
Anyhoo... I just bought a S200 with WM5 in Swedish (the only language available here) and the damn thing lacks the transcriber. I googled a bit and found out the transcriber could be installed separately. Well.. no. Not on my S200. It just says that "transcriber is not a valid pocket-pc application". :roll:
Has anyone with a non-english s200/prophet/JAMin actually managed to install the transcriber? I was really looking forward to using that particular function, it was actually one of the main reasons I bought a non-qwerty-phone.
An option for me would be to flash the whole thing to english (I'm an Aussie so I'd actually prefer it) but is it possible to use swedish characters if the OS is english?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Is it possible for anyone to post the file here, or anyother place, as I don't have an swedish Imei...
onesolo said:
dragon666 said:
Hello...
go to http://www.smartmobile.se/ and choose S200, then u can download the file from there.. it´s working... cheers!
DBZero said:
Hello everyone!
I'm new to this forum and Qtek/HTC/I-mate but judging by what I've browsed through so far this place kicks ass.
Anyhoo... I just bought a S200 with WM5 in Swedish (the only language available here) and the damn thing lacks the transcriber. I googled a bit and found out the transcriber could be installed separately. Well.. no. Not on my S200. It just says that "transcriber is not a valid pocket-pc application". :roll:
Has anyone with a non-english s200/prophet/JAMin actually managed to install the transcriber? I was really looking forward to using that particular function, it was actually one of the main reasons I bought a non-qwerty-phone.
An option for me would be to flash the whole thing to english (I'm an Aussie so I'd actually prefer it) but is it possible to use swedish characters if the OS is english?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Is it possible for anyone to post the file here, or anyother place, as I don't have an swedish Imei...
Click to expand...
Click to collapse
Hey, they have an A2DP patch there!!! Can someone with Swedish IMEI pull it out for us all as well? http://www.smartmobile.se/item.aspx?id=743
I previously installed MintBerry 1.10.21 + german language pack.
So far everything is very snappy and stable but I have one (for me) big problem.
I'm can't use a german dictionary with standard android keyboard.
Is there any way to install the german dictionary afterwards ?
With GalnetMiui everything was fine but I like MintBerry much more.
Thanks in advance
edit: I found what I was looking for
Hello everybody,
two days ago I found this rom (http://forum.xda-developers.com/showthread.php?t=1906026) and installed it - successfully ... so far. The rom works much better than my previous one (tezet's CM10) and has even more options. But I can't get one thing working. It's the layout for the hardware-keyboard. I can type but online letters from a-z. Z and Y are correct positioned (as on the german keyboard) but when I press alt oder left-shift and then try to type a number or a special character, nothing happens except that two little arrows appear at top and bottom of the cursor pointing to its center.
What I tried to solve this problem:
- Changed languages at the settings-panel to german whereever I found such a setting
- Installed this layout-file: http://forum.xda-developers.com/showpost.php?p=32586129&postcount=35
- Extracted, copied and overwrote all files from the folder /system/usr/keylayout off of the rom I used before where everything worked fine
Unfortunately since I'm new to this site I do not yet have privileges to post right in the thread of that rom. So I'm sorry I opened another one. I hope for sympathy and help.
Big thanks in advance,
parameta
Sorry if my answer will be of little help, but here it goes.
I understand that you cannot access any special character without Alt. Have you tried by long-pressing a button ?
Furthermore, the QWERTZ keyboard is not supported yet for AOKP for Milestone 2, see http://forum.xda-developers.com/showpost.php?p=32029006&postcount=3.
The latest build of your ROM was released on 2012-10-15, but it is based on CM10 which has seen 4 builds since that date, including a really major one. I suggest you ask Megalith27 to release a new version of his ROM, based on the all-newest CM10. (Maybe I'll do that if I learn how to do it.) However I don't know whether that will solve your problem or not.
I understand this response is not so helpful, but I didn't want to leave you without any sign of life for ages.
Tschüss !
Agmenor said:
Sorry if my answer will be of little help, but here it goes.
I understand that you cannot access any special character without Alt. Have you tried by long-pressing a button ?
Furthermore, the QWERTZ keyboard is not supported yet for AOKP for Milestone 2, see http://forum.xda-developers.com/showpost.php?p=32029006&postcount=3.
The latest build of your ROM was released on 2012-10-15, but it is based on CM10 which has seen 4 builds since that date, including a really major one. I suggest you ask Megalith27 to release a new version of his ROM, based on the all-newest CM10. (Maybe I'll do that if I learn how to do it.) However I don't know whether that will solve your problem or not.
I understand this response is not so helpful, but I didn't want to leave you without any sign of life for ages.
Tschüss !
Click to expand...
Click to collapse
You will be able to get a qwertz keyboard in this Rom for sure.
just follow this link, and download my qwertz file. replace it as described. It will work. But replace just that one file. Not all the files as you have done!!!
http://forum.xda-developers.com/showpost.php?p=32586129&postcount=35
So reflash the rom zip in recovery, and do it again. You will get all the olf files back, this way.
If you want to read this how to in german, please send me a pm. I will give you another link....
I'm sorry for my late reply, but here I am.
First of all, thank you for your answers.
@Agmenor:
Yes I tried long pressing and this way I get the usual small window with offers some special characters and letters. But that's not very comfortable.
I believe, if Megalith27 had to compile a new version auf this ROM that would be too much of an effort with too little use. But thank you anyway.
@lulli1
Will I be able to write letters and special characters with your linked files or will I only get a quertz layout? Typing special characters and letters without switching to the softkeyboard or long pressing buttons is one of my demands on this rom.
By the way, do I know you from android-hilfe.de? If yes, call me "MalzMalz", that's me. If not, ignore this line.
Greetings,
parameta