Database Users

[Q] rooting and unrooting using superoneclick

I want to root my defy stock 2.2 (india), since my battery is just 2 days with nill to moderate use.
I hv read setvsel threads on this forum, who on stock fw, hv got 4 days (with moderate use) backup, since my use on cell is very low, dont see wats eating the battery. Yes i used battery monitor widget, didnt see anything eating my battery other than standy and cell idle, which i think is normal. tried the airplane trick too, no change.
So i am thinking of rooting using superoneclick. Before i do that, have few clarification :
a. i hv d/led superoneclick ver 1.9.5, which has both root and unroot tab.
b. let say for some reason i want to unroot, will the unroot tab clear all the root related files ?. I read here, some files like busybox are not removed. And there is no option to uninstall either So people who hv tried unrooting, have they got all the files related to su deleted ? if not how to delete thos ?.
c. if leaving the busybox as is after unrooting, will it be a cause of any security concern ?.
c. have read the setvsel thread, each phone is different, so i hv to find some sweetspot where i dont see any freez/reboots for a day or 2.
assuming that i use below settings (I dont want to overclock) and my cell is stable.
---
classical.hd wrote:
300/17
600/29
800/41
Stable for 2 weeks up till now
My Defy can last 4 days with moderate calls, SMS, and web sur
---
Do i need to set at boot option in setvsel, so it boots with these settings ? or not check this ?. Everytime i boot i shd set it manually ?
If in case i hd set at boot option, and my cell wount boot(saw some1 with this issue), how do i get back ? flash stock rom again or factory-reset will do the trick ?
Yes lots of question, plz bare with me, am new to all of this
-hanu

hanu_blr said:
c. have read the setvsel thread, each phone is different, so i hv to find some sweetspot where i dont see any freez/reboots for a day or 2.
assuming that i use below settings (I dont want to overclock) and my cell is stable.
---
classical.hd wrote:
300/17
600/29
800/41
Stable for 2 weeks up till now
My Defy can last 4 days with moderate calls, SMS, and web sur
---
Do i need to set at boot option in setvsel, so it boots with these settings ? or not check this ?. Everytime i boot i shd set it manually ?
-hanu
Click to expand...
Click to collapse
If phone is stable, you can 'set at boot' option and no more need to manually set these settings.

hanu_blr said:
I want to root my defy stock 2.2 (india), since my battery is just 2 days with nill to moderate use.
I hv read setvsel threads on this forum, who on stock fw, hv got 4 days (with moderate use) backup, since my use on cell is very low, dont see wats eating the battery. Yes i used battery monitor widget, didnt see anything eating my battery other than standy and cell idle, which i think is normal. tried the airplane trick too, no change.
So i am thinking of rooting using superoneclick. Before i do that, have few clarification :
a. i hv d/led superoneclick ver 1.9.5, which has both root and unroot tab.
b. let say for some reason i want to unroot, will the unroot tab clear all the root related files ?. I read here, some files like busybox are not removed. And there is no option to uninstall either So people who hv tried unrooting, have they got all the files related to su deleted ? if not how to delete thos ?.
c. if leaving the busybox as is after unrooting, will it be a cause of any security concern ?.
c. have read the setvsel thread, each phone is different, so i hv to find some sweetspot where i dont see any freez/reboots for a day or 2.
assuming that i use below settings (I dont want to overclock) and my cell is stable.
---
classical.hd wrote:
300/17
600/29
800/41
Stable for 2 weeks up till now
My Defy can last 4 days with moderate calls, SMS, and web sur
---
Do i need to set at boot option in setvsel, so it boots with these settings ? or not check this ?. Everytime i boot i shd set it manually ?
If in case i hd set at boot option, and my cell wount boot(saw some1 with this issue), how do i get back ? flash stock rom again or factory-reset will do the trick ?
Yes lots of question, plz bare with me, am new to all of this
-hanu
Click to expand...
Click to collapse
I got working using superoneclick 1.9.5, just follow the instructions
I'm using defy purchase just a week ago.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ok, i rooted and was successful. root checker confirmed its rooted.
now comming setvsel, to start with i used these values
300/17
600/29
800/41
Within few minutes, cell rebooted. So i tried moving 5 steps up for all 3 frequencies. Then i ran stability test, here there are 3 tests for each frequency.
Since am aming for better battery life, shd i run only for 300 freq ?. How long shd i run this test ? i tried with 15 and 30 mins, in both cases cell freezed! hd to pull battery to boot. shd i try each freq 1 by 1 and stress test it ?
-hanu

I DL'd superoneclick and have just spent the last 5 hours cleaning my machine. I got into this because I (perhaps anively) thought XDA users would have screamed about a root program delivering viruses and rewriting system files.
Chrome refused to download it & my AV software recognised it as an Android Exploit - I checked online and found it was designed to change root and I thought, OK, that's WHY I am downloading it. So stupidly, I disabled my AV software and DL'd it then tried to run it. It infected every browser, Chrome and Firefox and even my disabled IE.
I ran MS Security Essentials and cleaned quite a few things, I ran superantispyware and got some as well. But Chrome and Firefox kept starting with QVO6 and I had a Desk365 and a News.net toolbar that just wouldn't quit. I am not a novice. I cleared cache and Temp Internet file, I removed the changes in Chrome and firefox. I cleaned my system with COMODO and then I ran regedits on everything I had found and deleted them as well.
I then booted to my Avira CD and ran that, clearing out 4 instances of a trojan that wasn't there a couple of weeks back when I last ran it.
Anyone know a clean version of SOC I could try?

[Official] Sekhy's ROM Question, Problems etc.

Post your problems or ask something you dont understand for the flashing process etc.
So feel free to post your question, or report a bug!

Common Faqs

Can I use Non-OC version Kernel over version 8.4?

yes u can. g3mod 2.3 recommended

Es file explorer says "test failed" when using root explorer. what might be wrong?
i am on 8.6.
When I removed es file explorer from system app and imstalled as user application from market, it worked....

bsuhas said:
Es file explorer says "test failed" when using root explorer. what might be wrong?
i am on 8.6.
When I removed es file explorer from system app and imstalled as user application from market, it worked....
Click to expand...
Click to collapse
I am using the ES file explorer pretty well. No errors at all. Anyway it is good to know that your problem is solved now.

Hi, again Suhas here.
Voodoo dose not work i guess. the amplification always says 0DB max even its set to 5 or 3 DB??

bsuhas said:
Hi, again Suhas here.
Voodoo dose not work i guess. the amplification always says 0DB max even its set to 5 or 3 DB??
Click to expand...
Click to collapse
There are issue with it. Ignore it. There is not much difference with Voodoo.

sekhar can u tell me how to flash system.img files with odin.... i hav flashed tar files quite a few times n want to try ur new rom(8.6)

FC on Sekhy ROM v9.x
Hi there.... dunno know why i'm keep getting FC on com.android.phone (twice) every time i reboot or turn ON my phone. Also can't enable my "use packet data". please help me regarding this issue coz its seem that your ROM is quite fast and nice from the others for galaxy 3.

yamamma said:
Hi there.... dunno know why i'm keep getting FC on com.android.phone (twice) every time i reboot or turn ON my phone. Also can't enable my "use packet data". please help me regarding this issue coz its seem that your ROM is quite fast and nice from the others for galaxy 3.
Click to expand...
Click to collapse
The force close bug is due to browser.apk removal. I will give the update in v9.2.
Packet data can be used and there is no error. It causes because at that time your network provider is not providing the data connection temporarily.
If it is not the case, go to settings > Wireless and network > Mobile Network > Access point names > Press the menu key > Reset to default.
This should work anyway.

HeXacoRe0 said:
sekhar can u tell me how to flash system.img files with odin.... i hav flashed tar files quite a few times n want to try ur new rom(8.6)
Click to expand...
Click to collapse
You dont need to flash system.img files. put that file in respective directory on sd card for example, sekhys collector editions system.img file can be kept in sdcard\Android\data\g3mod\roms\Sekhy_8.0. then reboot in recovery, select multiboot->switch rom->Sekhy_8.0->done. you can optionally take backup of current rom in the multiboot.
---------- Post added at 11:32 PM ---------- Previous post was at 11:27 PM ----------
Sekhar, if its clear that OC versions of kernel will perform good, why one should go for non-oc version? are there any drawbacks of OC kernel?

bsuhas said:
, if its clear that OC versions of kernel will perform good, why one should go for non-oc version? are there any drawbacks of OC kernel?
Click to expand...
Click to collapse
Well an oc kernel may cause instability(never happened to me) and will shorten the lifespan of your CPU chip, but I don't worry about that as the chips are made to last at least 5 yrs, so although the lifespan is shorten, I would have alrdy changed my phone
Cheers
Sent from my i9003 powered by Cyanogenmod 7

bscraze said:
Well an oc kernel may cause instability(never happened to me) and will shorten the lifespan of your CPU chip, but I don't worry about that as the chips are made to last at least 5 yrs, so although the lifespan is shorten, I would have alrdy changed my phone
Cheers
Sent from my i9003 powered by Cyanogenmod 7
Click to expand...
Click to collapse
I always use OC kernel and never saw any issues but still has this doubt.
Thanks mate.

will try it later on... especially for the new updates.....~

Help me... i'm dunno how to fix this...~
Why i'm getting E: SIGNATURE VERIFICATION FAILED and E: can't mount to \cache while wiping the profile and cache..?? plz help me...~

yamamma said:
Why i'm getting E: SIGNATURE VERIFICATION FAILED and E: can't mount to \cache while wiping the profile and cache..?? plz help me...~
Click to expand...
Click to collapse
Try to mount cache manually under mounts in cwm
Sent from my GT-I9003 using xda premium

yamamma said:
Why i'm getting E: SIGNATURE VERIFICATION FAILED and E: can't mount to \cache while wiping the profile and cache..?? plz help me...~
Click to expand...
Click to collapse
check sdcard/Android/data/g3mod/fs.current file...it should be like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if it's diferent cache file format u should use fs.convert..and put it in sdcard/Android/data/g3mod/....
and reboot phone...wait untill it boots...if it stucks at g3mod logo wsit 15min then force reboot(hold power key untill reboot)...now you should be able to wipe caches in cwm
btw: disable signature verification in cwm too...
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~

bscraze said:
Try to mount cache manually under mounts in cwm
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
I can't mount it manually as well..... hhhhmmmm...~

yamamma said:
I can't mount it manually as well..... hhhhmmmm...~
Click to expand...
Click to collapse
you can't because of filesystems are not right..
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~

[[FAQ] AK Kernel 101

AK Kernel FAQs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Q1) What are custom kernels? What are the benefits of using custom kernels?
A kernel is basically the bridge between the software and hardware. Whenever you command your phone to do something (launching an app), the software sends that request to the hardware which in turn, makes the launching of the app possible. Custom kernels for Android are unofficial creations of independent developers. Unlike the kernels that OEMs make, custom kernels offer more modifications that allow you to tweak your phone in every possible way.
Benefits Of Installing Custom Kernels
You can benefit from having better control of your device. These options are most helpful for users who want to maximize the full potential of their phone or perhaps want to extend their device's battery life. Below are some of the benefits of installing custom kernels.
-Adjust CPU frequencies and set profiles like OnDemand, Battery Saving, etc.
-Underclock and overclock CPU speeds
-Underclock and overclock GPU speeds
-Adjust voltage
-Adjust touch screen sensitivity
-Equip your phone with BLN (backlight notifications)
-Custom recovery that allows backups and restorations of entire ROMs as well as installation of .zip files
-Minimum screen brightness pushed past the limitations of stock kernel
-Conserve battery (with the right settings
Q2) Where can I get the AK kernel and which one should I flash?
The latest kernel is always linked in the OP.
Q3) How do I make changes to my kernel settings? (ex: voltages, fastcharge, etc.)
Download the Trickster Mod from the Google Play store.
Q4) Can I use AK on xxxxx rom?
AK is known to work on any rom based on AOSP, AOKP, CM10, ChameleonOS, and KickFlip.
Q5) How do I install it coming from another kernel?
TWRP is the prefered recovery, although CWM recovery may also work.
The ideal way to install AK, especially if you are coming from another kernel, is to do the following.
Wipe cache and dalvik cache
Wipe /system
Re-flash your ROM
Flash AK
Fix permissions in recovery (this may take up to a minute or two)
Reboot
Q6) Do I need to wipe cache/dalvik/battery stats/etc if I'm just installing the kernel onto a previous AK version?
No, download and flash away. Only wipe battery stats if your battery percentages are off. Do not believe the myth that doing so will increase your battery life.
Q7) Do I need to run any other apps like SetCPU or equivalent?
No, if you plan to install and run Trickster Mod, please uninstall any other apps that may interfere with your CPU settings. If you are still running into problems (ex: reboots, FCs, etc.) please check your /etc/init.d directory for any left over scripts from other rom or kernels. These may interfere with how AK operates.
Q8) What is Smart Reflex? What is FSync? What is Thermal Throttling?
Smart Reflex is used to scale your voltages. Voltage will be increased or decreased when required. If you are overclocking, disable SR to have access to higher clock speeds.
FSync is a system call that can be toggled on to write buffers to disk (slow) or toggled off (fast) for performance. FSync defaults to on in the linux kernels, the option to disable it exists but it is advised to use this with caution. COMPLETE data corruption could occur if the phone crashes with fsync disabled.
Thermal throttling protects your CPU from overheating. If you are benchmarking, turn this option off to prevent throttling of the CPU that can cause lower scores. Just remember to re-enable it afterwards. Bear in mind that at 110C, the CPU will shut down no matter what. It is not advised to disable thermal throttling, however the option exists for those enthusiasts who are aware of the risk of permanent hardware damage. Please take the necessary precautions!
Q9) What is the sleep of death (SoD)?
You turn the screen off, when you want to pick it up, you can not wake it up.
There is no blinking notification and when you call it, there is no ringing or vibration. When you press and hold power, it does not turn on, otherwise it was OFF.
If you play a game and it reboots, or freezes. That is NOT a SoD.
Q10) Can xxxxx option be implemented in AK?
Feel free to request features within this thread or the dev thread. Whether or not it gets implemented is up to Stefano.
Q11) I want to keep my Rom's bootanimation, why does AK kernel keep trolling me?
The boot animation by Ciprian is hardcoded so it cant be changed.
Q12) How is battery life?
No one can predict your usage. However, most folks are getting great screen on time and performance.
Q13) I just experienced a reboot, how can I help to pinpoint the problem?
Open up terminal emulator and issue the command:
Code:
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
Take this last_kmsg.txt file and show it to Stefano in this thread. It's suggested to copy the contents and use something like pastebin instead of spamming the thread with your log.
Any other things that should stand in the FAQ? Did I make some horrible language mistakes? Write me a PM or post in this thread.
=============================
Credits-
Stefano - for this great kernel :good:
GideonX - for letting me use this format and some of the question from his post :good:

If you have any problems, you need to collect the following data before reporting it:
- Report Only with default Freqs + default Uv
- kernel version
- rom version
- governor
- scheduler
- freq cpu
- freq gpu
- logcat
- dmsg
- last_kmsg
- short description of the problem

Thanks a lot MAN!

anarkia1976 said:
Thanks a lot MAN!
Click to expand...
Click to collapse
no bro, thanks you for making this awesome kernel @anarkia1976
PS- btw i would appreciate it if you could link this thread in your OP cuz i dont have an n4 so dont really visit your thread

Khizar said:
AK Kernel FAQs
-Adjust touch screen sensitivity
​
Click to expand...
Click to collapse
How do i do that.?​

faddyie said:
How do i do that.?
Click to expand...
Click to collapse
i think there is mod in the dev section...
Note- i dont have a n4 so try at your own risk.. i made the AK 101 thread for the gnex and just posted the same thread here
Edit- btw i might get a mod to close this thread...looks like nobody is really using it lol

Guide LG G3 No Lag for ever - by fosseperme

Excuse me for bad English
And after the success of the mod that I realized that solved the vast majority of defects audio Nexus 5, I came back more determined than ever to solve once and for all the lags problems that afflict LG G3. By following this simple guide (consisting of more parts with the help of various tools) will restore to life your G3 which eventually will be made the most of its hardware and power!
Requirements: terminal with root permissions
Rom: this procedure was tested on lollipop roms type AOSP (cyano 12 based), but it should easily run also on based rom LG , kitkat and lollipop.
Step 1
The first step towards the elimination of the lag is the installation of the app Seeder from playstore (which many of you already know). So you open the app, set it on, then crossed out the boxes "Suspend RNG service while screen off" and "Start automatically on boot" (the second option instead leave it unchecked) and then set the mode profile Aggressive.
Step 2
Disable (or at least delay as much as possible) the thermal control of LG, in order to avoid that the temperature increase leads to an automatic underclock and to a drop in performance of the CPU.
Flashing then zip through recovery from this file: LINK
In the case of the based LG rom is preferred instead to use this method here.
Step 3
Enable hardware rendering and disable the overlay hardware.
Go to the developer options in your rom (if don t appears the option, you must activate it before going into the phone info and more by clicking on the name of the build until it is given the confirmation message) and enable the option "Force GPU rendering".
Now just below is another important option that should be activated, "Disable HW overlay"; unfortunately happens that this option once activated is constantly disabled when you restart the phone, and then you will be forced to re-enable it manually. To avoid this will appeal to a startup script automatically. Download it at this link, and create a folder in your internal memory (which for convenience we will call scripts) and paste the downloaded file inside.
Now download the app from the market "init.d scripts support" of RYO Software. Open it and set it as follows; check the "Run scripts at boot time", set in the Execution Delay the option No Delay and then select the folder that you created in the internal memory and in which you have pasted the script (making sure to save the selected folder , so that coming back should view the route chosen precisely - just indicate only the folder, the script file inside do not see but do not worry!). Now reboot and you should see that at boot of the phone the script application will start automatically (when loading the script itself), and so in the options developer you will have the option "disable overlay" always active without the need for manual activation every time.
Step 4
At every change of rom or update of the same rom, make fstrim procedure (because this phone is plagued by bug trim). Download the app from the playstore called "emulator terminal" (by Jack Palevich), open it and type on
su
fstrim /date
fstrim /system
fstrim /cache
Alternatively you can use the app called lagfix from playstore.
Now enjoy your LG G3 lag free !!!

If there is no cost on battery life after apply this mod, its worthed to try.
Installed and working fine for now more fluid and lab free, anyway need more testing.

For Some reason Seeder 2.0 failed to turn ON although SuperSu granted permission.
CloudyG3 2.0 Lollipop ROM on D855 Powered by ChupaChups kernel v. 2.1

rogconnect said:
For Some reason Seeder 2.0 failed to turn ON although SuperSu granted permission.
CloudyG3 2.0 Lollipop ROM on D855 Powered by ChupaChups kernel v. 2.1
Click to expand...
Click to collapse
Seeder works well on lollipop (i tested it on many roms such as cm12,resurrection remix and pa beta 5.0). Download latest version on xda and reflash latest supersu from recovery.

I have cloudy g3 2.0 and it really working
I will post in. Couple of days what my battery status

UPDATE: I noticed that disable the thermal control inevitably cause to a greater increase in temperature of the terminal and the consequent reduction in battery life, of course, for the benefit of better performance. If you do not want that, you can go directly to step 3 and skip this step.

fosseperme said:
UPDATE: I noticed that disable the thermal control inevitably cause to a greater increase in temperature of the terminal and the consequent reduction in battery life, of course, for the benefit of better performance. If you do not want that, you can go directly to step 3 and skip this step.
Click to expand...
Click to collapse
Did that my self from the start and still working like charm, battery considering, looks like this have no impact on battery life for now.

I got random reboots after doing the thermal mod and developer settings change. Resored from the recovery...

remember guys the Step 2 CAN actually damage your hardware.
first time i did this after few minutes my device got so hot i could not keep my finger on the power button to bring up the power menu. so it can burn your device internally!

Step 4 dosent work on Cyanogenmod 12 nightly? If i use the app called lagfix its fails
Sendt fra min LG G3 @ Android 5.0.2 Custom
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
And in terminal emulator i got this is this right?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sendt fra min LG G3 @ Android 5.0.2 Custom

bo-l said:
And in terminal emulator i got this is this right?
Sendt fra min LG G3 @ Android 5.0.2 Custom
Click to expand...
Click to collapse
Take away the space between the "/" and the "cache" and your error will go away...
Sent from my SHIELD Tablet using Tapatalk

ailima said:
Take away the space between the "/" and the "cache" and your error will go away...
Sent from my SHIELD Tablet using Tapatalk
Click to expand...
Click to collapse
Thx works now
Sendt fra min LG G3 @ Android 5.0.2 Custom

[Guide] [Stock] [Franco_r10] 7 - 8 hours of screen on time, TEST it yourself

* Your warranty is now void.
* I am not responsible for bricked devices, corrupted partition,your phone blowing up on your face
* Please do some research before using this Guide!
* YOU are choosing to make these modifications,
* If by any chance this guide starts a nuclear war it's not me i swear .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys this is my first time posting here on the OnePlus 3T forum and this guide is for those who want the latest builds (4.x.x) but not quit the battery drain that comes with them
1- A Rooted Oneplus 3/3T on Stock or Freedom Os with TWRP recovery
2- Franco Kernel R10
3- Governor Tuner / Download link for Version 3.9 / Link of the description of this Mod
4- Busybox
1- Flash Franco kernel & Busybox or use Apps From the Play Store Franco Updater + Busybox on Rails reboot and make sure your rom now supports init.d if not flash this
2- Boot a second time to recovery and Flash GovTuner_3.9.zip i recommand wiping ART/ cache
3- Now go to Terminal Emulator and type:
Command lignes
su
govtuner
4-Select number "1" and hit Enter to apply battery profil then wait 3 seconds
5- Now Select "p" and hit enter then "y" to apply the mod
NOTE : Make sure that it shows ini.d : Active and not init.d: deactivate if not you will have to use Universal ini.d otherwise the mod can't be applied on boot and you will have to reapply it manually.
Also you need to give it 3 battery circles before actually getting passed 7 hours of SOT on heavy use
Good luck Hit thanks

Reserved

This is just stupid, why are people making these guides.
If you can't get 7 hours sot without any of this stuff, then youre doing something wrong, the 3T has perfectly capable battery.

I installed universal init.d but after selecting a profile, terminal emulator brings me back to the same screen. theres no options for "p" or "y" to activate. Just "1" to select.

schwiing said:
I installed universal init.d but after selecting a profile, terminal emulator brings me back to the same screen. theres no options for "p" or "y" to activate. Just "1" to select.
Click to expand...
Click to collapse
I recommend flashing governor tuner 3.9 for power efficiency mod if u downloaded a previews release update it
Universal ini.d is for those who encounter bugs causing the profil to not be applied on boot so if u have in the last ligne
Init.d: active
Then you have full support and you don't need the app

venomus001 said:
I recommend flashing governor tuner 3.9 for power efficiency mod if u downloaded a previews release update it
Universal ini.d is for those who encounter bugs causing the profil to not be applied on boot so if u have in the last ligne
Init.d: active
Then you have full support and you don't need the app
Click to expand...
Click to collapse
Thanks for the quick reply. Updating gov tuner to 3.9 now (had 3.8). It said Init.d was NOT active so I needed the app.

ritchiedrama said:
This is just stupid, why are people making these guides.
If you can't get 7 hours sot without any of this stuff, then youre doing something wrong, the 3T has perfectly capable battery.
Click to expand...
Click to collapse
Man i had so many problems and battery drain coming from the kernel and CPU i couldn't get more then 4 hours i even calculated the real power used from the os and it wasn't getting above 2700 mAh so technically i had a drain of almost 500 mAh wish the system could not explain now im getting much more juice and the phone is much cooler

schwiing said:
Thanks for the quick reply. Updating gov tuner to 3.9 now (had 3.8). It said Init.d was NOT active so I needed the app.
Click to expand...
Click to collapse
I'll try to update the thread later with the link to have full support by flashing it using recovery

venomus001 said:
I'll try to update the thread later with the link to have full support by flashing it using recovery
Click to expand...
Click to collapse
Appreciate it.

SyCreed said:
I was getting on stock with franco's kernel easily 7hrs without any tuning or tweaking.. it's really unneeded.. that guy know excatly what he's doing.
Click to expand...
Click to collapse
i had battery drain from day one with 4.0.2 until i tried this now with heavy use i get 7hrs which Rom are u using ?
if you are still on MM then this is not for you

SyCreed said:
Now running RR.. with elementalx kernel, without any tweaks.. =)
Click to expand...
Click to collapse
this guide is just for stock hope RR is stable now
Really u only need to tweak this Mod once that's what i like about it and the phone is still fast even on battery Profil

venomus001 said:
NOTE : Make sure that it shows ini.d : Active and not init.d: deactivate if not you will have to use Universal ini.d otherwise the mod can't be applied on boot and you will have to reapply it manually.
Also you need to give it 3 battery circles before actually getting passed 7 hours of SOT on heavy use
​
Click to expand...
Click to collapse
Hey, just (re)installed after updating to 4.0.3 but it keeps saying init.d is not available.
Tried flashing the init.d enabler, but that says init.d is available already.
And, anyway, I can confirm init.d is working just fine.
Any clue?
EDIT: D'oh! Just realized I didn't reboot after flasking Kernel!
Thanks!​