Database Users

[I9001][REF]Calibrate Your Battery!

Many people face the problem of messed up battery stats, so i thought of making a small guide on how to fix your phone's battery stats. Their are two methods to fix your battery stats ( 'how to know that your battery stats are messed up?' Is in the second post if someone doesnt gets in between;-) )
Instructions:
*firstly, you require root explorer from the market or you can use' file expert' from the market( file expert is free).
*firstly, charge your phone to 100% percent battery.
then.......
*Using root explorer- open 'root explorer'--then in 'system' open 'data' then open 'system' their you will find a file 'batterystats.bin', you have to delete that file by long pressing on it( note: you must mount r/w then only you can delete it).
*using file expert- firstly you have to press menu key when you open file expert then open ' more', then open 'settings' ,then open ' file explorer settings' , then scroll down to bottom and tick root explorer and then re launch the application. Then you have to follow the same instruction as what you did using root explorer i.e. goto 'system'--'data'--'system'--delete ' batterystats.bin' file.
*Then after you delete batterystats.bin file you must discharge your phone until it switches off and then charge your phone until it shows 100% battery( note: make sure that during discharging you dont reboot your phone or the system will create a new batterystats.bin file or if already made, it will get corrupted and you will have to start again from first step).
Note: these methods are not permanent and your battery stats may again get messed up any day, then you should repeat the method from first step.

I used an app called "battery calibration" which deletes the batterystats.bin file...

blingin said:
I used an app called "battery calibration" which deletes the batterystats.bin file...
Click to expand...
Click to collapse
Did ur battery life improve mate?

it doesnt improve the battery life, it just calibrates the readout of the battery status to be consistent with the actual capacity of the battery
cheers

Thanks for the info! will look for the app

I did the one that wipe battstat via recovery mode
Sent from my GT-I9001 using Tapatalk

I dont know which method to is correct..now i'm doing this...
Charge batt to full, using root explorer delete batterystat.bin
But i google theres more guide is like this...
Switch off phone, charge till full, go to recovery mode, wipe batterystat...reboot, wait till full batt notification then unplug charger...but this way the batterystat.bin is appear in the system coz reboot after wipe...
So, the correct way is to let the batterystat.bin there after wipe or delete it or need to wipe/delete it again when it appear???
Sent from my GT-I9001 using Tapatalk

dont use that thing la....
plz try this...
i have try to my best lover phone (i9001)...
it really work...
plz underclock your CPU to 1.0 Ghz...
dont use stock CPU 1.4 Ghz...
u can use your i9001 3-4 day..
tq...
ghaf

ghaf85 said:
dont use that thing la....
plz try this...
i have try to my best lover phone (i9001)...
it really work...
plz underclock your CPU to 1.0 Ghz...
dont use stock CPU 1.4 Ghz...
u can use your i9001 3-4 day..
tq...
ghaf
Click to expand...
Click to collapse
Haha...can u post how to underclocl? I'm noob man....hehe
Post from my GT-I9001 Adrenaline Shot v13

@Ghaf:underclock it to 600 mhz.....it will last even longer lol
@pyronia:use something like SetCPU or No-frills cpu control(from market)

sakindia123 said:
@Ghaf:underclock it to 600 mhz.....it will last even longer lol
@pyronia:use something like SetCPU or No-frills cpu control(from market)
Click to expand...
Click to collapse
Itry use setcpu but cant set to 1ghz, its going to 7++ only...bur if set to low cpu the device performance will get slow is it?
Post from my GT-I9001 Adrenaline Shot v13

This what i get from no frills cpu control...it seems the same to other cpu app i use...no option to set to 1Ghz..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Post from my GT-I9001 Adrenaline Shot v13

use overclockable feamod kernel

sakindia123 said:
use overclockable feamod kernel
Click to expand...
Click to collapse
Paste the link here bro...but, is the kernel stable?
Post from my GT-I9001 Adrenaline Shot v13

pyronia said:
Paste the link here bro...but, is the kernel stable?
Post from my GT-I9001 Adrenaline Shot v13
Click to expand...
Click to collapse
Search... It's on the forum.
Yes it's stable.. Just read the thread so you know which version is recommended atm

Still searching the correct way....hehe
GT-I9001 Adrenaline Shot - powered by Instanet free edition

ghaf85 said:
dont use that thing la....
plz try this...
i have try to my best lover phone (i9001)...
it really work...
plz underclock your CPU to 1.0 Ghz...
dont use stock CPU 1.4 Ghz...
u can use your i9001 3-4 day..
tq...
ghaf
Click to expand...
Click to collapse
got another tips, for advanced ppl only..DO THIS AT YOUR OWN RisK! MAy CAUSE YOUR PHONE TO BE NON-RESPONSIvE !!!
1.charge phone to 100%,
2.press pwer button for several sec,
3.choose 'power off' opton
4.u r guarenteed several years of battery

Dear sakindia, i read on the maker of supercharger v6 script post...he calibrate like this...
-charge to 100%
-remove batterystat
-reboot, on reboot take out battery
-phone will startup without battery
-insert battery back
-wait till it charge to 100% again
-unplug charger
Can this be perform to i9001?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SGS+i9001 - 2.3.6 zskp6 | Adrenaline Shot
FeaMod 1.2 | Celcom Instanet 3G Free Data

1 more thing, from all these calibration method...do i have to let the phone unused n wait it to drain...or use it till it drain???
It seems all calibrate method not mention this...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SGS+i9001 - 2.3.6 zskp6 | Adrenaline Shot
FeaMod 1.2 | Celcom Instanet 3G Free Data

pyronia said:
1 more thing, from all these calibration method...do i have to let the phone unused n wait it to drain...or use it till it drain???
It seems all calibrate method not mention this...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SGS+i9001 - 2.3.6 zskp6 | Adrenaline Shot
FeaMod 1.2 | Celcom Instanet 3G Free Data
Click to expand...
Click to collapse
use it like u normally do!

[NOOB Guide] Installing custom roms

Hi guys, I'm one of the testers of Supreme bean v5 rom before it was approved to go online, and I observed the forum and a lot of people have a lot of questions about installing the rom and the Note 3 package.
So, I'm sharing with you what needs to be done in order to install the right way, get the max performance, batt life, how to avoid FCs and some known errors, ways to correct them and what to expect from the device + some mods you would like to have
This Guide can also be followed for Hurricane rom, Phoenix, Jellykat, Dr. Ketan's and all possible roms out there with of course, logical reasoning required
And make sure you read the entire post as it will save you a lotttt of google searches and time searching for answers.
Please also note that following these methods will void your warranty, so dont tell me later I never told you so
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Step 1
Case 1> You are coming from Android v4.1, not rooted, not modified
a) Then you would have to update the bootloader to mj5 which is available in this forum as well as install wifi patch.
b) Then you would also have to install a custom recovery such as Philz or twrp And this will be done through ODIN.
Case 2> your warranty is already void and have a custom recovery in place
Before install, super wipe. And I dont mean just clearing cache, preload and system folders. Use of Philz recovery recommended, update to the latest if possible. Use the "clean to install new rom" option under wipe data/factory reset. I havent seen an other recovery that does a better job than philz. I've made thousands of flashes, and not once my EFS was affected.
After using the option clean to install a new rom, head over to the mounts and storage area and use the option "format /sdcard", before using this option though, make sure you backup the folders pictures, DCIM and whatsapp if you plan on restoring the conversations that you've had. This is equally important if you play a lot of games. Games have a tendency to leave behind huge clusters of junk.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Step 2
Install the rom, and dont flash any mod or pack just yet, reboot. Allow the rom to complete all the necessary after install procedures. Complete setup and just make sure play store updates itself and camera is working all right.
To install mods or Note 3 pack or a custom kernel, reboot now to recovery
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Step 3
Installing Note 3 pack:
On roms such as Phoenix, Jellykat, Xperiazised rom, note 3 pack comes as preinstalled. So, the further steps can be skipped until step 4.
in case of Supremebean, as @geekynoob is working on his Note 3 pack, he suggests to use either Tamirda's or Hurricane's Note 3 pack.
Installing note 3 pack increases ram consumption and battery consumption, and puts in some bloat which might give errors so proceed only if there is an absolute need for note 3 pack, otherwise can be skipped.
Considering the fact that we install Note 3 pack, it is done in 2 ways,
1> right after flashing rom, flashing note 3 pack without reboot
2> complete rom setup and then flash note 3 pack with reboot
Although I recommend the second method, the first one is also quite possible if you just want to save some time. However, during setup, when asked to sign in to samsung account, skip that. As cloud services are natively missing in the rom, You will receive a "network error" toast notification during sign in. So, skip that. Rest is as normal. Follow the on screen instructions.
Now the rom has to be pretty much setup to your requirements
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Step 4- Mods
1> To change DPI
There are 3 ways of doing this
a) build.prop edit
b) installing a 240 dpi mod pack
c) using Texdroider dpi
Although all the 3 methods do the same job, i would not recommend the second method as it installs system files which can be much older than the rom base and can lead to some FCs or errors. Now if you find the first method too tedious, use the app called Texdroider dpi from play store to do that job. Its as easy as install, change values and reboot. Its the easiest way to change dpi on any rom,
2> Customization
To everyone who hates the stock look, or if looking for something different, use xposed module. I prefer wanam by choice as almost every option in it works. There are options available such as gravitybox, xblast and others which do the similar job. Here, you will be the best judge on what you want, and how you like the rom to be and function.
3> Custom kernels
There are options of Kernels available, but I personally prefer Agni. Tried almost all kernels possible out there on all the roms, and I mean literally. And Agni give me the best out the best possible batt performance and enhanced smoothness.
Use these settings in Agni as recommended by geekynoob
"Profile- normal
CPU governor- yanks zzmove
Max CPU freq- 1600mhz
CPU undervolting to -30mv
Gpu -50mv
Min 200mhz
Touch 2 wake off
Lmk medium
Power saving balancer set to max"
4> Disable motion, NFC, Air Gestures and all possible things that you dont use as it consumes CPU usage and battery as well.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thats is guys. These are all the suggestions that I can think of at the moment. If you need anything else, let me know, by replying to this post.
Have fun customizing the rom.
And as always, thank me if this post helped you. :silly:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Some of my Screenshots
Some of my screen shots

You just saved me! thanks alot!:good::good::laugh::laugh:

Guide LG G3 No Lag for ever - by fosseperme

Excuse me for bad English
And after the success of the mod that I realized that solved the vast majority of defects audio Nexus 5, I came back more determined than ever to solve once and for all the lags problems that afflict LG G3. By following this simple guide (consisting of more parts with the help of various tools) will restore to life your G3 which eventually will be made the most of its hardware and power!
Requirements: terminal with root permissions
Rom: this procedure was tested on lollipop roms type AOSP (cyano 12 based), but it should easily run also on based rom LG , kitkat and lollipop.
Step 1
The first step towards the elimination of the lag is the installation of the app Seeder from playstore (which many of you already know). So you open the app, set it on, then crossed out the boxes "Suspend RNG service while screen off" and "Start automatically on boot" (the second option instead leave it unchecked) and then set the mode profile Aggressive.
Step 2
Disable (or at least delay as much as possible) the thermal control of LG, in order to avoid that the temperature increase leads to an automatic underclock and to a drop in performance of the CPU.
Flashing then zip through recovery from this file: LINK
In the case of the based LG rom is preferred instead to use this method here.
Step 3
Enable hardware rendering and disable the overlay hardware.
Go to the developer options in your rom (if don t appears the option, you must activate it before going into the phone info and more by clicking on the name of the build until it is given the confirmation message) and enable the option "Force GPU rendering".
Now just below is another important option that should be activated, "Disable HW overlay"; unfortunately happens that this option once activated is constantly disabled when you restart the phone, and then you will be forced to re-enable it manually. To avoid this will appeal to a startup script automatically. Download it at this link, and create a folder in your internal memory (which for convenience we will call scripts) and paste the downloaded file inside.
Now download the app from the market "init.d scripts support" of RYO Software. Open it and set it as follows; check the "Run scripts at boot time", set in the Execution Delay the option No Delay and then select the folder that you created in the internal memory and in which you have pasted the script (making sure to save the selected folder , so that coming back should view the route chosen precisely - just indicate only the folder, the script file inside do not see but do not worry!). Now reboot and you should see that at boot of the phone the script application will start automatically (when loading the script itself), and so in the options developer you will have the option "disable overlay" always active without the need for manual activation every time.
Step 4
At every change of rom or update of the same rom, make fstrim procedure (because this phone is plagued by bug trim). Download the app from the playstore called "emulator terminal" (by Jack Palevich), open it and type on
su
fstrim /date
fstrim /system
fstrim /cache
Alternatively you can use the app called lagfix from playstore.
Now enjoy your LG G3 lag free !!!

If there is no cost on battery life after apply this mod, its worthed to try.
Installed and working fine for now more fluid and lab free, anyway need more testing.

For Some reason Seeder 2.0 failed to turn ON although SuperSu granted permission.
CloudyG3 2.0 Lollipop ROM on D855 Powered by ChupaChups kernel v. 2.1

rogconnect said:
For Some reason Seeder 2.0 failed to turn ON although SuperSu granted permission.
CloudyG3 2.0 Lollipop ROM on D855 Powered by ChupaChups kernel v. 2.1
Click to expand...
Click to collapse
Seeder works well on lollipop (i tested it on many roms such as cm12,resurrection remix and pa beta 5.0). Download latest version on xda and reflash latest supersu from recovery.

I have cloudy g3 2.0 and it really working
I will post in. Couple of days what my battery status

UPDATE: I noticed that disable the thermal control inevitably cause to a greater increase in temperature of the terminal and the consequent reduction in battery life, of course, for the benefit of better performance. If you do not want that, you can go directly to step 3 and skip this step.

fosseperme said:
UPDATE: I noticed that disable the thermal control inevitably cause to a greater increase in temperature of the terminal and the consequent reduction in battery life, of course, for the benefit of better performance. If you do not want that, you can go directly to step 3 and skip this step.
Click to expand...
Click to collapse
Did that my self from the start and still working like charm, battery considering, looks like this have no impact on battery life for now.

I got random reboots after doing the thermal mod and developer settings change. Resored from the recovery...

remember guys the Step 2 CAN actually damage your hardware.
first time i did this after few minutes my device got so hot i could not keep my finger on the power button to bring up the power menu. so it can burn your device internally!

Step 4 dosent work on Cyanogenmod 12 nightly? If i use the app called lagfix its fails
Sendt fra min LG G3 @ Android 5.0.2 Custom
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
And in terminal emulator i got this is this right?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sendt fra min LG G3 @ Android 5.0.2 Custom

bo-l said:
And in terminal emulator i got this is this right?
Sendt fra min LG G3 @ Android 5.0.2 Custom
Click to expand...
Click to collapse
Take away the space between the "/" and the "cache" and your error will go away...
Sent from my SHIELD Tablet using Tapatalk

ailima said:
Take away the space between the "/" and the "cache" and your error will go away...
Sent from my SHIELD Tablet using Tapatalk
Click to expand...
Click to collapse
Thx works now
Sendt fra min LG G3 @ Android 5.0.2 Custom

[Guide] [Stock] [Franco_r10] 7 - 8 hours of screen on time, TEST it yourself

* Your warranty is now void.
* I am not responsible for bricked devices, corrupted partition,your phone blowing up on your face
* Please do some research before using this Guide!
* YOU are choosing to make these modifications,
* If by any chance this guide starts a nuclear war it's not me i swear .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys this is my first time posting here on the OnePlus 3T forum and this guide is for those who want the latest builds (4.x.x) but not quit the battery drain that comes with them
1- A Rooted Oneplus 3/3T on Stock or Freedom Os with TWRP recovery
2- Franco Kernel R10
3- Governor Tuner / Download link for Version 3.9 / Link of the description of this Mod
4- Busybox
1- Flash Franco kernel & Busybox or use Apps From the Play Store Franco Updater + Busybox on Rails reboot and make sure your rom now supports init.d if not flash this
2- Boot a second time to recovery and Flash GovTuner_3.9.zip i recommand wiping ART/ cache
3- Now go to Terminal Emulator and type:
Command lignes
su
govtuner
4-Select number "1" and hit Enter to apply battery profil then wait 3 seconds
5- Now Select "p" and hit enter then "y" to apply the mod
NOTE : Make sure that it shows ini.d : Active and not init.d: deactivate if not you will have to use Universal ini.d otherwise the mod can't be applied on boot and you will have to reapply it manually.
Also you need to give it 3 battery circles before actually getting passed 7 hours of SOT on heavy use
Good luck Hit thanks

Reserved

This is just stupid, why are people making these guides.
If you can't get 7 hours sot without any of this stuff, then youre doing something wrong, the 3T has perfectly capable battery.

I installed universal init.d but after selecting a profile, terminal emulator brings me back to the same screen. theres no options for "p" or "y" to activate. Just "1" to select.

schwiing said:
I installed universal init.d but after selecting a profile, terminal emulator brings me back to the same screen. theres no options for "p" or "y" to activate. Just "1" to select.
Click to expand...
Click to collapse
I recommend flashing governor tuner 3.9 for power efficiency mod if u downloaded a previews release update it
Universal ini.d is for those who encounter bugs causing the profil to not be applied on boot so if u have in the last ligne
Init.d: active
Then you have full support and you don't need the app

venomus001 said:
I recommend flashing governor tuner 3.9 for power efficiency mod if u downloaded a previews release update it
Universal ini.d is for those who encounter bugs causing the profil to not be applied on boot so if u have in the last ligne
Init.d: active
Then you have full support and you don't need the app
Click to expand...
Click to collapse
Thanks for the quick reply. Updating gov tuner to 3.9 now (had 3.8). It said Init.d was NOT active so I needed the app.

ritchiedrama said:
This is just stupid, why are people making these guides.
If you can't get 7 hours sot without any of this stuff, then youre doing something wrong, the 3T has perfectly capable battery.
Click to expand...
Click to collapse
Man i had so many problems and battery drain coming from the kernel and CPU i couldn't get more then 4 hours i even calculated the real power used from the os and it wasn't getting above 2700 mAh so technically i had a drain of almost 500 mAh wish the system could not explain now im getting much more juice and the phone is much cooler

schwiing said:
Thanks for the quick reply. Updating gov tuner to 3.9 now (had 3.8). It said Init.d was NOT active so I needed the app.
Click to expand...
Click to collapse
I'll try to update the thread later with the link to have full support by flashing it using recovery

venomus001 said:
I'll try to update the thread later with the link to have full support by flashing it using recovery
Click to expand...
Click to collapse
Appreciate it.

SyCreed said:
I was getting on stock with franco's kernel easily 7hrs without any tuning or tweaking.. it's really unneeded.. that guy know excatly what he's doing.
Click to expand...
Click to collapse
i had battery drain from day one with 4.0.2 until i tried this now with heavy use i get 7hrs which Rom are u using ?
if you are still on MM then this is not for you

SyCreed said:
Now running RR.. with elementalx kernel, without any tweaks.. =)
Click to expand...
Click to collapse
this guide is just for stock hope RR is stable now
Really u only need to tweak this Mod once that's what i like about it and the phone is still fast even on battery Profil

venomus001 said:
NOTE : Make sure that it shows ini.d : Active and not init.d: deactivate if not you will have to use Universal ini.d otherwise the mod can't be applied on boot and you will have to reapply it manually.
Also you need to give it 3 battery circles before actually getting passed 7 hours of SOT on heavy use
​
Click to expand...
Click to collapse
Hey, just (re)installed after updating to 4.0.3 but it keeps saying init.d is not available.
Tried flashing the init.d enabler, but that says init.d is available already.
And, anyway, I can confirm init.d is working just fine.
Any clue?
EDIT: D'oh! Just realized I didn't reboot after flasking Kernel!
Thanks!​

ROM[NATRIUM][8.1]**crDroid**[4.6]

this is crDroid for Xiaomi Mi5sPlus
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list
First time installing crDroid to your MI5sPlus, or coming from another ROM:
- Make sure you're running a proper working Recovery (TWRP)
- Copy GApps and crDroid zip to your external SDCard
- Boot into Recovery
- Wipe system,data and cache
- Flash crDroid zip
- Flash GApps zip
- Reboot
Upgrading from earlier version of crDroid:
- Copy crDroid ZIP to your external SDCard
- Boot into Recovery
- Wipe system and cache
- Flash crDroid zip
- Flash Gapps
- Reboot
Don't expect any support if you:
- are not running stock crDroid-kernel
- have installed any mods such as Xposed!
- have modified system files
DONATE
crDroid G+ community
https://github.com/crdroidandroid
Website​
XDA:DevDB Information
crdroidandroid, ROM for the Xiaomi Mi 5s Plus
Contributors
firebird11
Source Code: https://github.com/crdroidandroid
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: los
Version Information
Status: Testing
Created 2018-04-22
Last Updated 2018-04-22

DOWNLOAD
opengapps
changelog
.

thank you

Thank you for bringing some love to our device! Will it be official?

fantastic work hopefully have continuity
regards

thanks for rom
where is dpi chenger

4ur0r said:
Thank you for bringing some love to our device! Will it be official?
Click to expand...
Click to collapse
He's part of CrDroid team, so it's official.

DPI changer is sortof present already in the ROM.
Just installed it today, quite like it.

no 4G-LTE
working!!

Memory optimization is wayyyyy too aggressive, apps get killed with multiple gigs of memory free.
Edit: I'm starting to think this is an aggressive power saving feature in 8.

Is this official?

udaan said:
Is this official?
Click to expand...
Click to collapse
Yes it is
Sent from my LG-D855 using Tapatalk

firebird11 said:
Yes it is
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Awesome! Thank you. :good::laugh:

Can confirm that 4g doesn't work.

Thank you for this awesome rom! I installed it yesterday and everything seems to be working, it also has an incredible customization! I really like this rom so far, i'll see how is the battery but for now seems similar to LOS.
P.S.: for me 4G works without any problem, i'm from Italy and i have Tim (Telekom)

Figured it out, 4g LTE is disabled by default in this ROM (why???), enabled LTE and now I have 4g.
To fix this,
Settings > Network & Internet > Data Usage > Top right | Mobile Networks.
Expand advanced, Tap "Preferred network type" and select something with LTE ( the first one is probably best ). You should see that there is a preferred network type selected that does not contain LTE.
To prevent apps from being killed quick type in doze in the search bar, select the only option and deselect what should not be killed.
I considered disabling this altogether as I have the 6GB version, but I don't need this + I care about battery life.

UsernameNotRecognized said:
Figured it out, 4g LTE is disabled by default in this ROM (why???), enabled LTE and now I have 4g.
To fix this,
Settings > Network & Internet > Data Usage > Top right | Mobile Networks.
Expand advanced, Tap "Preferred network type" and select something with LTE ( the first one is probably best ). You should see that there is a preferred network type selected that does not contain LTE.
To prevent apps from being killed quick type in doze in the search bar, select the only option and deselect what should not be killed.
I considered disabling this altogether as I have the 6GB version, but I don't need this + I care about battery life.
Click to expand...
Click to collapse
thanks I could not imagine that I had to configure it now it works perfectly
regards

Trying to splitscreen two apps where one is not compatible will lock up the phone as such that I need to reboot to get out of the program.
I also notice the device heating up a bit more than normal and the battery draining a bit faster.
Where can I find the "hold volume to skip track" controls?
I like the ambient screen, but skipping a music track wakes the device (due to a notification) and then skipping the song again will instead blast my ears into oblivion (which isn't nice fyi). I tried to fix this with tasker, but using doze_enable just causes my phone to lock. Right.
Did some more digging, appears there is a setting that disables music tracks from triggering ambient screen. That's very close to what I want, only toggle I'd want is that volume rockers can still change track even when ambient screen is on and active. Heck make hold always skip a track when music is playing, I never in my life held the volume rockers down with the intention to increase the volume by much.

As it's supposed to be.
I made a rum installation. Everything works so well until now.I would like to thank those who have done this work.

Another small bug, there is no deadzone for pulling down the notification bar when in expended desktop mode.
E.g. If I have moon reader open and I want to open the notification bar I scroll through (sometimes a lot of) some text.
But aside from all these issues ( which are all very minor ) I am enjoying this ROM a lot.
Thanks Firebird