Database Users

Glass top for XDA II?

Hello,
I am looking to purchase a glass top for my HTC Himalaya (XDAII). Does anyone know where I can get it from?
Thanks you.

abohsali,
Do you mean a new touch-screen?
Codenix.

Hello,
No, only the glass top on top of the digitizer. the digitizer is intact.
Thanks

hhmmmm maybe i'm way off but as i understand it then
the xda is lcd and then a plastic layer which is the touch-screen
mine sure dont have glass over the touch-screen of cause i have a xda1

All pdas have an LCD touch screen but there is a glass top of the LCD. When you use the stylus and tap on the screen it is on the glass top that you are tapping.

the touch part is not a part of the lcd screen itself
it's a semi soft layer on top of the lcd and can be changed without
changing the lcd
there is no glass on top of it and this is why people spend coins on
screenprotecters to put on top of the touchscreen
i have a link to a online store which sell both lcd's and touchscreens for xda1 but i dont think they work on xda2's

i`m also looking for a digitizer for an xdaII. not found once yet, xda digitixers are for sale for about $60, which is a bargain in my opinion, but when you look at the xdaII there is only one ribbon cable for the screen which incorporates the lcd and digitizer so a repair appears to be very tricky. I`ll keep looking though

Hello-I need help finding a place that in the USA can repair my xdaII. I just dropped it on my marble floor -- OOPS! I thought you may have heard of a place for me to send it?? I believe I've broken the lcd & glass...it functions fine but has major cracks/shatter marks thoughout the screen...Let me know if you can help & thank you

Hi, I have managed to brake the Touch Screen (not the LCD Display, but the Toch Pad Layer) of my XDA 2. I am looking replacement parts. If any one can advise me on cost and located preferably in UK (for sending off for repair).
I have found these sites:
http://www.pdasmart.com/pdaphonexdaii.htm
http://www.pocketpctechs.com/main~u...rs-Full+Service+Repairs~action~updateunit.htm
they are selling Touchscreen Replacement for US$125 (by Post)
Thanks..
Roy

found digitizer seller on ebay
i found the digitizer seller on ebay, the only problem is, is there anybody that can teach me how to replace the digitizer ? cos' the seller said that i need to solder the digitizer.
this is the link http://cgi.ebay.com/OEM-O2-XDA-II-M...ryZ41343QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Changing a broken LCD screen on the universal

Hi!
I have been lurking around in this forum for quite some time, but I have been unable to find any information regarding how to disasamble the universal.
I have a broken screen, and I am thinking about buying a new lcd on ebay and try to replace the broken lcd.
I have tried to unscrew the six screws under the screen, but I am not able to open up and "get inside" to replace the lcd.
Are there any information aviable on how to do this, or even better an instruction on how to replace the lcd screen?
Thanks for any help and a great forum!

replacment screen
hi, i had the same issue where i accidently sat on my uni and cracked da screen. i ended up goin to a guy in slough who fixed ma screen for £120 (well £110 cos da screen has a really small scratch in the bottom corner on it - hardly visible)
It works perfectly and the screen looks new. im running all my normal apps on it, tomtom and i have no probs.
The guy advertises his screens on ebay and you can either send your uni to him or go to his house and get it done in front of you within 10 minutes. Definatly recommend this guy and he does all the XDA type screens and HP iPAQ's.
If anyone wants to contact this guy his number is 07919174796. He can sell you the screen on its own if you like.

HTC instructions
I have the pdf on how to dismantle and reassemble the HTC universal. Although I think it is in the FTP somewhere too.
BR
Wassa

itwasntme187 said:
hi, i had the same issue where i accidently sat on my uni and cracked da screen. i ended up goin to a guy in slough who fixed ma screen for £120 (well £110 cos da screen has a really small scratch in the bottom corner on it - hardly visible)
It works perfectly and the screen looks new. im running all my normal apps on it, tomtom and i have no probs.
The guy advertises his screens on ebay and you can either send your uni to him or go to his house and get it done in front of you within 10 minutes. Definatly recommend this guy and he does all the XDA type screens and HP iPAQ's.
If anyone wants to contact this guy his number is 07919174796. He can sell you the screen on its own if you like.
Click to expand...
Click to collapse
itwasntme187: Thanks, I was about to buy from this guy, but found another one at ebay that was a little bit cheaper ($160 for a new LCD screen). I sent an order today, so I hope I have done the right thing trying to fix it my self.
wassa: Thanks for notifying me that there was a manual out there. I checked the ftp and found the manual on dismantle and reassemble the HTC universal.
Thanks for the help to both of you.

you can download it here. http://buzzdev.net/component/option...om_remository&Itemid=100&func=fileinfo&id=304

The replacement was a success.
I got the LCD from ebay on Monday and using the above mentioned manual I was able to replace my broken LCD screen. It is an easy job if you follow the instructions in the manual. There is only a total of 8 screws that has to be unscrewed to get the job done. Now if I was only able to get a replacement camera flash light my universal would be in an almost perfect condition.

glad you got everything working!

Hi, im a newbie here. I also broke the LCD screen on my Universal/Xda Exec.
How can I access the FTP site to download the instructions on how to replace the screen?
Many thanks for your help.

you can get a new screen + have it replaced for 40 quid. Basically HTC has an agreement with the carphone warehouse and offer a repair service with all parts included for 40 pounds (I'm using a bloody german keyboard so i can't type the pound sign). When i broke my screen (I was bump starting a car with it in my pocket) i thought damn, now i'm 100 odd quid out of pocket, so i was suspiciously surprised when it was only 40 pounds. The only drawback is it takes about 6 weeks. Maybei should have posted this last year when i had my screen replaced...

LCD Replacement instruction sought
Hi. Hope the person who provided the instruction is still around. I am another Universal user who needs to replace the screen as the digitizer has not been working properly.
Anybody could provide the instructions on how to replace the LCD screen please? As far as I know the Universal's LCD screen and digitizer are attached and could not be separated without (de)soldering. But providing that the digitizer itself costs much less than the whole LCD ($8 vs. $135), if anyone would please provide the instructions on how to replace the digitizer (on the same lcd screen), that would really be awesome!
Really I do not enjoy the idea of sending the unit away for 2 weeks with £100 expense.
Thank you very much in advance!

Since there are obviously people here who have done this before could someone maybe help me out?
My screen is intact, but I dropped my Universal a while ago and since then the 2-axis screen hinge seems a bit loose. Everything works ok, it's just that the cover with the screen in it are not as firmly attached to the base as they used to be.
Can this be fixed by taking the device apart and reassembling it (tightening some screws and so on) or would it be a waste of time?

Replacement touch screen

I have couple of scratches on my touch pro screen.when the device is on the scratches are like rainbow colors really visible.If I change the touch screen (not the whole lcd screen) that will fix my problem right? Did any1 do this?

ummm i think when u meant by "rainbow colors" then ure gonna have to replace the WHOLE LCD screen, cuz more than likely its from the LCD screen, and i dont think the touch screen and LCD screen are 2 parts...i think theyre just one...not sure, but try to look on ebay OR idk if u have warranty on it u can probably call in HTC about it...

This is what I think will fix the scratches
Code:
[CODE]http://mobile1.brando.com.hk/prod_detail.php?prod_id=03976&dept_id=088&cat_id=0695
Code:

Much cheaper
For Digitizer Module for T-Mobile MDA Vario IV Touch Diamond
http://www.dealextreme.com/details.dx/sku.20648
For HTC Diamond
http://www.dealextreme.com/details.dx/sku.20647
I don't know if it fit the same as Touch Pro or Fuze, but read the spec

I have difficult time finding a How to replace digitizer video.
Any help?
Thanks

radoste said:
I have difficult time finding a How to replace digitizer video.
Any help?
Thanks
Click to expand...
Click to collapse
Maybe this can help.Its a How to remove cameras from touch pro with pictures
Code:
http://www.mediafire.com/file/h2mmwetxnij/HTC%20Touch%20Pro%20-%20Camera%20removal%20photo%20guide%20v1.1%20by%20A%20Mak.pdf

I saw that. It does not show how to remove the screen.
Why would you want to remove the camera?

radoste said:
I saw that. It does not show how to remove the screen.
Why would you want to remove the camera?
Click to expand...
Click to collapse
I wouldnt, thats just the only touch pro take apart that I found with pictures

mikechannon.net is a good place to start. But if you are looking to replace the digitizer only, you won't find it there. It's a bad move anyway. I tried that, cracked my lcd and end-up buying the whole lcd like this.
All I can tell you are my mistakes.... lol....
- never peel of the digitizer. it will ruin it.
- never try to remove the lcd with cutter blade. this is how i cracked it (stupid me and still regret it)
- between the lcd and the digitizer there is a thick, clear double tape like glue. i came across some information about this somewhere (forget where...). one said you should heat the glue first (don't know how to apply this without affecting the lcd) . other one said have to use dental floss.
So, there you go.

HTC Touch Pro- LCD & Digitizer replacement instuctions
Hi everyone. I have SCOURGED the internet looking for some kind of decent instructions to replace the LCD & Digitizer screen on my HTC Touch Pro (Sprint) phone with the new set I purchased from Hong Kong. Mike Shannon's site does NOT give directions for this specific area.
I have seen you all talking about needing to do the same thing and wonder if anyone has done it? And do you have any directions to help me?
I've had this part for a month now, and can't find any directions to do it! My dog chewed it, and the touch works, but the screen is half black now. I read it is easier/less risky to replace both lcd and digitizer, which I went ahead and purchased them both with the tools, now I just need to find something decent (instructions) to have help replacing it.
thanks to anyone who can step up to help me, I'm frustrated beyond all comprehension, and now feel I may as well ditch the phone if I can't find a way to replace it. Or maybe you know someone I could send it off to? Everyone wants to charge a couple hundred bucks sending it in to them!

to the appling heat ...u can try putting it in a ziploc bag and boiling it ...and for the instructions this is the best i can do for u http://store.payloadz.com/str-asp-i...nance_Manual_eBooks_Technical-end-detail.html
im pretty sure after all ur fustration 8 dollars wont kill u ...and im pretty sure the condensation from the boiling wont hurt
and i found a free one hope it helps http://www.htcdriver.com/index.php?page=htc-raphael

it's a long trip, in russian, to get to the lcd
http://www.pdacenter.ru/razborka/htc-touch-pro/
You can use Google translate on it. It seems that the hardest component to get to is the lcd. I also bought the digitizer, since my lcd is fine. I'll post a follow-up if I go for it.

Any luck getting the touch screen off and new one on?
I bought a touch screen and digitizer as separate items. I wish I had known that some kind of clear adhesive is supposed to be between them.
A) What happens if you don't use this adhesive?
B) Has anyone successfully replaced the screen/digitizer with replacements on the fuze or touch pro?

Anyone having luck?
Has anyone actually figured out how to install this? I just got what was supposed to be a replacement LCD+digitizer. they shipped the pieces seperate, so I can't understand how to put them together, since HTC seems to only list the part as one piece and there are no instructions or videos anywhere that indicate how to install them as seperate pieces, or get them to connect.

Dont do it!!
Ok, I just recently bought a parts phone on here (a Fuze) and was "just going to replace the digitizer" (Authors laughs, then cries at statement)
Ok, yes you can replace the digitizer without replacing the screen, BUT they tell you to use an oven (you can buy one from HTC they make it available to their techs, so you need someone that can get that for you). If you do not make sure that ALL of the glue is loose prior to taking the digitizer off you will split the LCD.
It is much simpler to get either a parts phone or a screen and digitizer and replace the part. I had to replace my digitizer as the touch function did not work. You can find older project phones in the market section. If you figure the cost of a parts phone (plus you have extra parts if anything else goes out) vs. if you buy a digitizer, then rip a part of the LCD because all of the glue was not disolved, and have to buy either a parts phone or a new phone anyway you will be way ahead of the game.
There are a number of good resources on here as to how to disassemble and reassemble the fuze.
I WOULD NOT RECOMMEND TRYING TO REPLACE THE DIGITIZER ALONE IF YOU HAVE NOT BEEN TRAINED OR HAVE THE PROPER EQUIPMENT - unless you need a reason to sell your spouse on why you need a new phone. "Honey, I tried my hardest to fix it, but I guess it is really broke now, I'm gonna have to get an HD2"
If you have any questions about the process let me know I am always more than happy to help.

http://www.mikechannon.net/PDF%20Manuals/HTC%20Raphael_SM_A10%20_GENERIC__01%20Dec%20
pkwhisker said:
Mike Shannon's site does NOT give directions for this specific area.
Click to expand...
Click to collapse
Yes, indeed, mike channon does offer a very detailed service manual for the raphael.

Replacing the display on the HTC Touch Pro (Raphael): Some Tips
Replacing the display on the HTC Touch Pro
How To - Tips
1. Collect information
a. Find the Service Manual HTC Touch Pro (Raphael) on Mike Channons's site, the Raphael wiki or you could Google for it. File name is "HTC Raphael_SM_A10 _GENERIC__01 Dec 08.pdf".
Take a look at the disassembly and assembly chapters of the Service Manual.
The following two lists may be helpful.
---
List 1: types and quantities of screws
[SPL no., P/N, pages of Service Manual, description, quantity used in Raphael]
10. 72H01893-00M (see p. 34), black (middle length), 2x
11. 72H02450-00M (see p. 32, 34, 30), black (shortest type), 7x
12. 72H02474-00M (p. 37), black (longest type), 4x
13. 72H02689-00M (p. 30), metal, 4x
26. 72H02865-00M (p. 35), metal, 6x
27. 72H02886-00M (p. 35), 1x torque screw for M/B, 1x
---
List 2: kinds of tape/fabric used in the Raphael
a. Conductive fabric
Self adhesive conductive fabric, parts 14-24 on the SPL. The adhesive backside is also conductive.
b. Mylar
A specific kind of polyethylenetereftalaat (PET) used for electical insulation.
c. Kapton tape
Kapton is a polyimide film which can remain stable in a wide range of temperatures. (electrical insulation)
d. EMI gasket
EMI shields are implemented in a design to isolate one component or section of a device from another.
e. Double sided tape
---
b. Movies of the disassembly process can be found on YouTube for the HTC Diamond.
The Diamond does not have an integrated keyboard, so it is a bit different, but it is good enough to get an idea of the process.
The information on how to replace the screen itself is not found in the service manual.
c. Study the last few stages of the HTC Touch Pro page on pdacenter.ru
(Translate the page into English using Google.)
The display is attached to the metal frame by 4 small pieces of double sided tape.
3. Get some tools
a. Phillips (cross head) screwdriver size 00x50
The right size is 00. The length, 50mm, is less important.
There is one torque screw in the Raphael (SPL no. 27), but it can easily be handled by a normal screwdriver.
b. Plastic stick (to open the case)
The standard plastic stick I had ordered was actually too big. The one I made myself was smaller and proved to be better.
c. Other tools
I did not use these, but if you plan to do more than one it would be a good idea to use the
- plastic tweezers
- ESD wrist wrap
- rubber gloves
4. Buy a display with touch screen attached to it
You could buy the touch screen and the display separately, but I could not find any information on putting them together. Avoid problems by buying these already attached.
5. Replace the display
a. Disassemble following the Service Manual, leaving the M/B unit in order.
Be careful not to break the small speaker cords. Do not move them too much because they are very fragile.
Be sure to keep every piece of tape safe for reassembly. Buying new tape can be quite expensive.
b. For the last stages, follow the instructions from pdacenter.ru.
Press the old display gently out of the metal frame. Move the pieces of double sided tape from the old to the new display, and fit the new one into the metal frame.
c. Reassemble following the Service Manual.
Good luck!

What will fit what?
Will the lcd and digitizer from a sprint version work on an alltel version(ppc-6850)? Or is there another lcd and digitizer that i can use? Im back to the old berry 8703 and its killing me.

spammer said:
if you just find scratches on the surface, then you just need to change the touch screen digitizer. the soldering is requested when you fit it.
But of course, if you buy the one that lcd and touch screen fit together one, then no soldering request.
Anyway, soldering is not such difficult if you has the tool.
thanks
Click to expand...
Click to collapse
I don't see any soldering involved there. The digitizer is fitted with thin lines of some kind of glue or kit around the edges. I have not seen any documentation on it though.

ingmardb said:
I don't see any soldering involved there. The digitizer is fitted with thin lines of some kind of glue or kit around the edges. I have not seen any documentation on it though.
Click to expand...
Click to collapse
you can look at the connect flex cable part of your touch screen and the lcd, you will find they are soldered together. Of course , if you don't soldering it together, it will also work, but not as good as after soldering.

HTC Touch HD/Blackstone digitizer

Hi,
I'm new to this site, if I wrote something wrong, please have a mercy .
Ok, my thing is that I have HTC Blackstone and I broke its frontal cover (known as digitizer too ). I ordered this part prom ebay, and today I got it. Nice, new, tools included. But...then I started to dismember the phone, and at the end I discovered that its display is glued or something like that to frontal cover. The question is: How can I change this digitizer? Because with LCD everything is fine, I need to change just this digitizer.
Hope to hear some tips.
Thank you all in advance .

Checked the service manual in the wiki?

I tried, but only thing that I found was some kind of service manual for dismembering the phone up to LCD, but there isn't any info on how to change LCD (and I think that changing digitizer could be similar to changing LCD). I don't believe that HTC didn't include such an option to change LCD or digitizer, especially if digitizer can be bought separately.

Maybe this can help then.
http://vimeo.com/6892707
I've not watched it all the way through but hopefully it might help.

big thanks, but this guy in video is stuck in the same situation as me . I'll try to contact my local HTC service center, maybe they'll have some solution .

Sorry then don't know. Good luck.

worldendswithyou said:
big thanks, but this guy in video is stuck in the same situation as me . I'll try to contact my local HTC service center, maybe they'll have some solution .
Click to expand...
Click to collapse
I very much doubt they'll give you any info on taking the HD apart, they'll surely want you to send it in for repair!?
That said I would love to have a go at replacing the entire outer casing as mine is looking tatty now. Can you send me a link to the ebay seller that you got your parts from and maybe I'll have a go at it myself
EDIT: Perhaps it would be better to get a screen and ditigitzer as one unit? LCD & Digitizer
EDIT: Have you managed to get the screen and digitzer out of the front part of the case, I guess it's then easier to split the screen and digitizer. See this ebay item for pics, perhaps it makes a bit more sense when you look at it Full Housing Kit

worldendswithyou said:
Hi,
I'm new to this site, if I wrote something wrong, please have a mercy .
Ok, my thing is that I have HTC Blackstone and I broke its frontal cover (known as digitizer too ). I ordered this part prom ebay, and today I got it. Nice, new, tools included. But...then I started to dismember the phone, and at the end I discovered that its display is glued or something like that to frontal cover. The question is: How can I change this digitizer? Because with LCD everything is fine, I need to change just this digitizer.
Hope to hear some tips.
Thank you all in advance .
Click to expand...
Click to collapse
dude to save u time money and a head ache just call htc i tryed the same thing ur doing and i failed and even made it worst the touch hd lcd consist of 4 different layers of independent screens to combine into one and one of those screens that makes ur lcd go black is almost paper thin and will crack it u try to pry them apart for a new screen and body its only 150 tops i paid 113 i hav an u.k. device and i live in the usa i explained to them what i did i foud out that the u.k. devices hav a 28month warrenty on it call them they will say it will be around 300 until they get the device and see what it needs also i told them that i moded my rom and wen i got it back they had put back the oem rom

[Q] Cracked Screen

Hi
My friend has cracked the screen on her uk wildfire, i have replaced screens before so i have offered to have a go. However it appears that there are 2 different types of screens one with a chip (or IC) on the ribbon cable and one without. Does anyone know which one I need to order? the phone is still usable so i dont really want to take it apart just to find out what is already in it.
Also can anyone point me towards any tutorials on taking these apart?
Cheers
Jim

You'll have to take your phone apart to see which one it is just look for a chip on the digitizer ribbon cable if there's one the you need one with ic.
If the lcd is broke you don't need to they are all the same
Self Repair for HTC-Wildfire

Excellent thanks for the confirmation and the link