Hi,
I'm new to this site, if I wrote something wrong, please have a mercy .
Ok, my thing is that I have HTC Blackstone and I broke its frontal cover (known as digitizer too ). I ordered this part prom ebay, and today I got it. Nice, new, tools included. But...then I started to dismember the phone, and at the end I discovered that its display is glued or something like that to frontal cover. The question is: How can I change this digitizer? Because with LCD everything is fine, I need to change just this digitizer.
Hope to hear some tips.
Thank you all in advance .
Checked the service manual in the wiki?
I tried, but only thing that I found was some kind of service manual for dismembering the phone up to LCD, but there isn't any info on how to change LCD (and I think that changing digitizer could be similar to changing LCD). I don't believe that HTC didn't include such an option to change LCD or digitizer, especially if digitizer can be bought separately.
Maybe this can help then.
http://vimeo.com/6892707
I've not watched it all the way through but hopefully it might help.
big thanks, but this guy in video is stuck in the same situation as me . I'll try to contact my local HTC service center, maybe they'll have some solution .
Sorry then don't know. Good luck.
worldendswithyou said:
big thanks, but this guy in video is stuck in the same situation as me . I'll try to contact my local HTC service center, maybe they'll have some solution .
Click to expand...
Click to collapse
I very much doubt they'll give you any info on taking the HD apart, they'll surely want you to send it in for repair!?
That said I would love to have a go at replacing the entire outer casing as mine is looking tatty now. Can you send me a link to the ebay seller that you got your parts from and maybe I'll have a go at it myself
EDIT: Perhaps it would be better to get a screen and ditigitzer as one unit? LCD & Digitizer
EDIT: Have you managed to get the screen and digitzer out of the front part of the case, I guess it's then easier to split the screen and digitizer. See this ebay item for pics, perhaps it makes a bit more sense when you look at it Full Housing Kit
worldendswithyou said:
Hi,
I'm new to this site, if I wrote something wrong, please have a mercy .
Ok, my thing is that I have HTC Blackstone and I broke its frontal cover (known as digitizer too ). I ordered this part prom ebay, and today I got it. Nice, new, tools included. But...then I started to dismember the phone, and at the end I discovered that its display is glued or something like that to frontal cover. The question is: How can I change this digitizer? Because with LCD everything is fine, I need to change just this digitizer.
Hope to hear some tips.
Thank you all in advance .
Click to expand...
Click to collapse
dude to save u time money and a head ache just call htc i tryed the same thing ur doing and i failed and even made it worst the touch hd lcd consist of 4 different layers of independent screens to combine into one and one of those screens that makes ur lcd go black is almost paper thin and will crack it u try to pry them apart for a new screen and body its only 150 tops i paid 113 i hav an u.k. device and i live in the usa i explained to them what i did i foud out that the u.k. devices hav a 28month warrenty on it call them they will say it will be around 300 until they get the device and see what it needs also i told them that i moded my rom and wen i got it back they had put back the oem rom
Related
Hi!
I have been lurking around in this forum for quite some time, but I have been unable to find any information regarding how to disasamble the universal.
I have a broken screen, and I am thinking about buying a new lcd on ebay and try to replace the broken lcd.
I have tried to unscrew the six screws under the screen, but I am not able to open up and "get inside" to replace the lcd.
Are there any information aviable on how to do this, or even better an instruction on how to replace the lcd screen?
Thanks for any help and a great forum!
replacment screen
hi, i had the same issue where i accidently sat on my uni and cracked da screen. i ended up goin to a guy in slough who fixed ma screen for £120 (well £110 cos da screen has a really small scratch in the bottom corner on it - hardly visible)
It works perfectly and the screen looks new. im running all my normal apps on it, tomtom and i have no probs.
The guy advertises his screens on ebay and you can either send your uni to him or go to his house and get it done in front of you within 10 minutes. Definatly recommend this guy and he does all the XDA type screens and HP iPAQ's.
If anyone wants to contact this guy his number is 07919174796. He can sell you the screen on its own if you like.
HTC instructions
I have the pdf on how to dismantle and reassemble the HTC universal. Although I think it is in the FTP somewhere too.
BR
Wassa
itwasntme187 said:
hi, i had the same issue where i accidently sat on my uni and cracked da screen. i ended up goin to a guy in slough who fixed ma screen for £120 (well £110 cos da screen has a really small scratch in the bottom corner on it - hardly visible)
It works perfectly and the screen looks new. im running all my normal apps on it, tomtom and i have no probs.
The guy advertises his screens on ebay and you can either send your uni to him or go to his house and get it done in front of you within 10 minutes. Definatly recommend this guy and he does all the XDA type screens and HP iPAQ's.
If anyone wants to contact this guy his number is 07919174796. He can sell you the screen on its own if you like.
Click to expand...
Click to collapse
itwasntme187: Thanks, I was about to buy from this guy, but found another one at ebay that was a little bit cheaper ($160 for a new LCD screen). I sent an order today, so I hope I have done the right thing trying to fix it my self.
wassa: Thanks for notifying me that there was a manual out there. I checked the ftp and found the manual on dismantle and reassemble the HTC universal.
Thanks for the help to both of you.
you can download it here. http://buzzdev.net/component/option...om_remository&Itemid=100&func=fileinfo&id=304
The replacement was a success.
I got the LCD from ebay on Monday and using the above mentioned manual I was able to replace my broken LCD screen. It is an easy job if you follow the instructions in the manual. There is only a total of 8 screws that has to be unscrewed to get the job done. Now if I was only able to get a replacement camera flash light my universal would be in an almost perfect condition.
glad you got everything working!
Hi, im a newbie here. I also broke the LCD screen on my Universal/Xda Exec.
How can I access the FTP site to download the instructions on how to replace the screen?
Many thanks for your help.
you can get a new screen + have it replaced for 40 quid. Basically HTC has an agreement with the carphone warehouse and offer a repair service with all parts included for 40 pounds (I'm using a bloody german keyboard so i can't type the pound sign). When i broke my screen (I was bump starting a car with it in my pocket) i thought damn, now i'm 100 odd quid out of pocket, so i was suspiciously surprised when it was only 40 pounds. The only drawback is it takes about 6 weeks. Maybei should have posted this last year when i had my screen replaced...
LCD Replacement instruction sought
Hi. Hope the person who provided the instruction is still around. I am another Universal user who needs to replace the screen as the digitizer has not been working properly.
Anybody could provide the instructions on how to replace the LCD screen please? As far as I know the Universal's LCD screen and digitizer are attached and could not be separated without (de)soldering. But providing that the digitizer itself costs much less than the whole LCD ($8 vs. $135), if anyone would please provide the instructions on how to replace the digitizer (on the same lcd screen), that would really be awesome!
Really I do not enjoy the idea of sending the unit away for 2 weeks with £100 expense.
Thank you very much in advance!
Since there are obviously people here who have done this before could someone maybe help me out?
My screen is intact, but I dropped my Universal a while ago and since then the 2-axis screen hinge seems a bit loose. Everything works ok, it's just that the cover with the screen in it are not as firmly attached to the base as they used to be.
Can this be fixed by taking the device apart and reassembling it (tightening some screws and so on) or would it be a waste of time?
hey guys i have attached pictures of my g1's broken screen. First it was just from the top that was unnoticeable now it has spread to the other end take a look. Everything works fine, the touch is working perfectly everywhere on the screen. are there chances that this crack will grow further? i dont think repair parts are available right now ..what do you guys think?
http://img14.imageshack.us/img14/8046/dsc05476vk5.jpg
http://img22.imageshack.us/img22/563/dsc05477yf0.jpg
http://img12.imageshack.us/img12/2802/dsc05478ly8.jpg
http://img14.imageshack.us/img14/7278/dsc05480ry7.jpg
helo? anyone?
http://www.cellulardr.com/products.php?cat=513
is this screen will continue to work for a long time?are there chances of further cracks? which part of screen is this? digitizer?
r4yd3n said:
hey guys i have attached pictures of my g1's broken screen. First it was just from the top that was unnoticeable now it has spread to the other end take a look. Everything works fine, the touch is working perfectly everywhere on the screen. are there chances that this crack will grow further? i dont think repair parts are available right now ..what do you guys think?
http://img14.imageshack.us/img14/8046/dsc05476vk5.jpg
http://img22.imageshack.us/img22/563/dsc05477yf0.jpg
http://img12.imageshack.us/img12/2802/dsc05478ly8.jpg
http://img14.imageshack.us/img14/7278/dsc05480ry7.jpg
Click to expand...
Click to collapse
looks like your digitizer is broken.
however in the link that Dharkaron had posted (http://www.cellulardr.com/products.php?cat=513), there is replacement screen for around $180, it should contain digitizer in it, but i would check before purchase.
if thats a digitizer only, it should not spread, but you are in risk of damaging your lcd display. (not really relevant if you cant get digitizer by itself though)
Sorry but it looks more like your protection sheet is broken try to take that of maybe it will help ;-)
screen protector u mean? no its not tht I checked tht already how can the protector break its not solid ...so digitizer for $180 that expensive I rather wait for some time and get a new one
well, its the whole screen for 180, but it does not say that it does come with digitizer, so it actually maybe wiyhout one, that is why i would check, digitizer for my old sony was around 100 and it was only digitizer, without lcd, so i would wait and see if you can find digitizer by itself (as long as it is actually separate part and not integrated somehow with lcd...) good luck on your hunt.
@WvaanWaas
screeen protector, as like piece of elastic transparent film broken that way? very unlikely my friend.
r4yd3n said:
is this screen will continue to work for a long time?are there chances of further cracks?
Click to expand...
Click to collapse
There is no way to tell how long it will work. Could work for a day, could work for a year. Chances of further cracks? There is always a chance a crack will get bigger as it's subjected to day to day use. Also, please don't bump your own post, especially after less than a day of waiting. We have lives and don't sit here just to answer people's questions.
This link is just the digitizer, like i said prices seem high to me.
http://www.cellulardr.com/G1FaceplateDigitizerBlk.htm
Just saw this, might be all you need if the touchscreen still works on your phone.
http://www.cellulardr.com/G1FaceplateBlk.htm
ok i am confused..the broken screen of my g1 is it digitizer or the faceplate? my touch screen is perfect like before even on the cracked part it works like it used to do...i cant feel the crack probably because of the screen protector..if thts the faceplate then its gud
r4yd3n said:
ok i am confused..the broken screen of my g1 is it digitizer or the faceplate? my touch screen is perfect like before even on the cracked part it works like it used to do...i cant feel the crack probably because of the screen protector..if thts the faceplate then its gud
Click to expand...
Click to collapse
it is digitizer also known as touch screen, faceplate thats whats around (black frame) digitizer/touchscreen is not there, and that is what failed in yours. digitizer/touch screen.
this will not fix the problem: http://www.cellulardr.com/G1FaceplateBlk.htm
this will work: http://www.cellulardr.com/G1FaceplateDigitizerBlk.htm
I think I will continue to use it and wait for some time till I can find cheap digitizer
he3r0 said:
looks like your digitizer is broken.
however in the link that Dharkaron had posted (http://www.cellulardr.com/products.php?cat=513), there is replacement screen for around $180, it should contain digitizer in it, but i would check before purchase.
if thats a digitizer only, it should not spread, but you are in risk of damaging your lcd display. (not really relevant if you cant get digitizer by itself though)
Click to expand...
Click to collapse
It's pretty clear according to the description on Cellulardr that the LCD and the Touch screen digitizer are separate products. The digitizer is about 190$.
Part #: G1FaceplateDigitizerBlk
Manufacturer: HTC
SKU: LS032B7LX01
T-Mobile G1 Google Front Faceplate BLACK with Digitizer Touchscreen Lens
HTC Tmobile Android G1 Faceplate with Window Lens Touch Screen Glass and Flex Cable
Front Window Lens Glass is included
Price: $189.95
r4yd3n said:
hey guys i have attached pictures of my g1's broken screen. First it was just from the top that was unnoticeable now it has spread to the other end take a look. Everything works fine, the touch is working perfectly everywhere on the screen. are there chances that this crack will grow further? i dont think repair parts are available right now ..what do you guys think?
http://img14.imageshack.us/img14/8046/dsc05476vk5.jpg
http://img22.imageshack.us/img22/563/dsc05477yf0.jpg
http://img12.imageshack.us/img12/2802/dsc05478ly8.jpg
http://img14.imageshack.us/img14/7278/dsc05480ry7.jpg
Click to expand...
Click to collapse
The glass of the digitizer is broken my friend. Your screen protector should be intact. The LCD should most likely be intact but there no way of telling it 100% by looking at those pictures even though they were good. It doesn't look that bad but it will most likely get worse. Just use gently contact and do not press the screen. You may notice that the digitizer may not respond exactly like before but pretty good. Now there's a bigger risk your LCD will get broke as well if it is subject to heavy pressure.
Dharkaron said:
Just saw this, might be all you need if the touchscreen still works on your phone.
http://www.cellulardr.com/G1FaceplateBlk.htm
Click to expand...
Click to collapse
r4yd3n said:
ok i am confused..the broken screen of my g1 is it digitizer or the faceplate? my touch screen is perfect like before even on the cracked part it works like it used to do...i cant feel the crack probably because of the screen protector..if thts the faceplate then its gud
Click to expand...
Click to collapse
No the faceplate is just the plastic frame around/above the digitizer. You need the digitizer. Unfortunately CellularDR doesn't sell the digitizer itself but instead they have package of the faceplate+digitizer. That part including many others are out of stock looking at their site.
r4yd3n -> I don't know where you live but if you live in the US or Canada you should be able to order repair parts however if I were you I would send it in. Remember, Cellulardr have strict rules of not shipping outside USA and Canada (Confirmed in email) except probably if you're an american/canadian working overseas.
well the touch screen is still working like before I am surprised ...no effect of broken digitizer on the touch screen
meh
I broke my screen christmas eve
http://androidcommunity.com/forums/members/dzknockout/albums/mine/1605-phone.jpg
(Still fully funtional)
I say leave it till its necessary to get a new one. And rather than buy replacement parts for an arm and a leg, you can send it back to t-mobile for like $110 (provided you have insurance. But honestly, a broken screen isn't that big a deal if it's fully funtional. And my screen is way more f*cked up than yours
ohh yea urz is way too much cracked then my screen ...ok so I will continue to use it and wait for something better.
Good News Google G1 Digitizer Only Now available
Good news guys I just noticed that www.cellulardr.com now sells the Tmobile Google G1 Window Lens with Digitizer only at a lower price: http://www.cellulardr.com/G1Digitizer.htm
They don't have a picture yet so just to be sure I called them and confirmed that this is the correct part. Basically this is the Window Lens Glass with the Touch Screen Digitizer and has the Flex Cable attached to it. It does not include the LCD but I understand that most people that have broken their phone, have only damaged this part.
Hope this helps you guys.
P.S. They told me that they have a limited quantity in stock so if you really need it, jump on it.
Hey guys,
Just got out the car, fell over the cat and my HD2 has slipped from my top pocket and slammed screen down into the concrete driveway, doh! The screen is obliterated with cracks ... however
1. The picture is 100% clear/fine
2. The touchscreen works 100%
Can I just replace the top glass cover/screen, or is it an all in one combined unit? Im confident with electronics, just wish to know the answer before part hunting and stripping the device.
Cheers
Mike
Vapourmike said:
Hey guys,
Just got out the car, fell over the cat and my HD2 has slipped from my top pocket and slammed screen down into the concrete driveway, doh! The screen is obliterated with cracks ... however
1. The picture is 100% clear/fine
2. The touchscreen works 100%
Can I just replace the top glass cover/screen, or is it an all in one combined unit? Im confident with electronics, just wish to know the answer before part hunting and stripping the device.
Cheers
Mike
Click to expand...
Click to collapse
I would call HTC. They are good on their prices when it comes to fixing stuff that is out of warranty. A guy I knew got his Nexus One screen replaced for $90.
ap3604 said:
I would call HTC. They are good on their prices when it comes to fixing stuff that is out of warranty. A guy I knew got his Nexus One screen replaced for $90.
Click to expand...
Click to collapse
Problem is, I cannot afford to be without my phone, the phone is still usable its just difficult to read through the cracks, the image and touchscreen still work perfect, it's as if another layer of glass sits overtop.
Im 100% confident in stripping electronics etc, was just after a quick answer as to whether anyone knew if this was likely to be an entire screen or just a digitizer, if no one knows I will just strip it down tomorrow when I can get to my T drivers.
check out this vid on dissembling the hd2 - you might find your answer there..hope it helps
http://www.crunchgear.com/2010/03/02...g-the-htc-hd2/
look on craigslist. a lot of shady places replace your broken screens for cheap
Moschino02 said:
check out this vid on dissembling the hd2 - you might find your answer there..hope it helps
http://www.crunchgear.com/2010/03/02...g-the-htc-hd2/
Click to expand...
Click to collapse
http://www.crunchgear.com/2010/03/02/official-htc-step-by-step-video-for-disassembling-the-htc-hd2/
mrroey said:
look on craigslist. a lot of shady places replace your broken screens for cheap
Click to expand...
Click to collapse
I'm happy to repair myself as I see no reason to pay someone money when I work with electronics daily and I can locate parts easily, just need to know if its the digitizer or the LCD that's broken without pulling the device apart.
Also, thank you for the link above, will give that a look now, I really think it's just the top digitizer as the screen still shows a crystal clear image, the backlight works fine and the touchscreen works too, its just badly cracked.
This happened to me (apart from the cat), however it seems you got lucky, the LED screen decided to break, has all funny white lines over it but the glass is perfect.
^^ As far as going to fix it your self is concerned, I would have tried myself, however I just know with my luck that something would go wrong and it wouldnt work D:
I usually go via the DIY route but I've seen too many stories where HD2 repairs have gone horribly wrong. It seems that replacing one part is fairly straightforward but avoiding damage to others is not. I'm sure that as miniaturization continues repairs, even by talented amateurs, will become impossible.
It's your digitizer. It's available online. Just make sure you get the right one for your country. TMO-US uses a different one than everywhere else, I believe. Also, watch the video linked above. The digitizer removal I hear is somewhat tricky. Good luck!
Hi there and hello from Croatia!well,i must say changing digitizer on hd2 aint easy.lcd is glued with some special glue type and after you glue them up u need to glue digitizer for housing,for that im using ebay double sided iphone 3m tape but it is not strong enough.as for the hardware inside u ned to be 100% concentrated on this cuz flat for keypad is 30$...digitizer around 50$...chinese resellers with good quality.good luck!
Hi ya maties,
iv picked up a hd2 that turns on but no touch screen nor the buttons on the bottom work,
so i took it apart and first off, noticed that there was sticky tape on the digitizer,
and realized someone has tried to fix this, what my question is, i have included a photo of the back of the LCD screen and the connecter to the digitizer,
am i right in thinking that who ever tried to fix this, irst, didnt know what they were doing, and secondly didnt buy the right LCD / digitizer combo, as i have found out that there are two diff digitizers and lcds? anyways any insight would be great, as this i think is a pretty straight fix,
Cheers
Oliver
I happen to be going thru an lcd/digitizer replacement myself. It looks like the previous owner did in fact get a mismatched lcd digitizer combo. The digitizer in that photo is the European weld on type, and will need to be soldered to a matching lcd. The lcd in that pic is the American version and needs only to make the ribbon connection.
Cheers
hey thanks for that, i thought i was going crazy when i couldnt find out what the clip on the back of the lcd was for, the idiot who tried fixing it used sticky tape to stick it to the back of the lcd in hopes of it working. lol, anyways the other thing is the membrain for the buttons at the bottom are broken, is there a web site that sells the membrian?
cheers
Oliver
Your best bet would be to look on eBay for a broken hd2 for parts
Sent from my HTC HD2 using XDA App
i actually have an lcd and digitizer screen that I may let go at a good price..not to mention 2 phones worth of misc parts/mother board, chassis, etc...
let me know
Do you guys know if you can swap in a AU Telstra HD2 (T9193) main board into a US TMO HD2 (T8585) digitizer and shell? My digitizer quit and I want to get up and running asap.
Anyone know?
Unfortunately my screen broke, the LCD is working fine, and recognizes touches.
Is it possible to change only the glass and digitizer? Eg
I'm afraid of LCD panels from eBay. The service said that warranty is void at all events (even if they repair it).
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
I will order a complete LCD panel with frame and try to replace myself. But I don't know if they are the same quality as original.
erikieperikie said:
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
Click to expand...
Click to collapse
Let us know when you do! Please also specify which replacement you bought. It's a good idea to document these things, because in the coming years many more people will break their screens, unfortunately, but we can help them finding out what screens are worth buying.
I'm especially interested in touch performance and LCD similarity to the original. If you could pay attention to those properties and comment on them when you know, that would be really helpful.
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
billysam said:
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Click to expand...
Click to collapse
Sec0nd said:
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
Click to expand...
Click to collapse
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
billysam said:
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Click to expand...
Click to collapse
Sec0nd said:
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
Click to expand...
Click to collapse
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
I found several glass with digitizer on eBay: https://www.ebay.com/sch/i.html?_fr...RS0&_nkw=Xiaomi+A1+touchscreen+glass&_sacat=0
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
I love advices like that.U r smart.
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Roykooiman said:
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Click to expand...
Click to collapse
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Localhorst86 said:
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Click to expand...
Click to collapse
I've contacted a local repair shop and said they couldn't do only the digitizer, but they can do the whole LCD repair which will cost me 25 euro. Now I have to find the right one..... as you have so much variant on Ebay and Alie. U have a suggestion on which one to choose?
My MI A1 display is craked .but display is working and phone functions are working .just I ask you if I using the craked display for long time is it problem come.phone sold 3 days ago so I cannot want to repair the lcd. .Plz advice
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
erikieperikie said:
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
Click to expand...
Click to collapse
Do buttons light work ?
NITRO_100 said:
Do buttons light work ?
Click to expand...
Click to collapse
Yes! See attached images. The LED also works, but isn't on in the pictures.
erikieperikie said:
Yes! See attached images. The LED also works, but isn't on in the pictures.
Click to expand...
Click to collapse
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
NITRO_100 said:
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
Click to expand...
Click to collapse
I didn't know that! It wouldn't have been bad, because I don't like the button backlight at all: it's on for too short, it's too bright, it's not like I can't find the buttons and it's not like I don't know what functions the buttons have... I hope we can turn it down or off in the stock ROM in the future!