My device doesn't have a CSC anymore.

My device doesn't have a CSC anymore. - Galaxy S II General

So I was flashing my phone a bit, but I've come to a point where ,when I dial *#1234#, it says "CSC: Unknown". Kies also doesn't show me the firmware version anymore. It's just blank. And when I enter recovery mode it says something like
copying media files
succesfully copied media files
# manual mode #
updating application
successfully updated application
appling multi csc (yes it says appling..)
Installing multi-csc
cant access /system/csc/xeu/system
successfully applied multi-csc
How can I go back to my XEN csc so I can just update from KIES again (I tried flashing with odin cause I wanted to debrand my S2)
I've fixed this problem but I'm still stuck with the multi-csc thing. I've made another post about it so disregard this thread.

Have you tried using odin to flash a CSC directly? If not check Intratech's thread with the factory FW list for a CSC, that you can flash. I think he has all of them there.

Try *#272*<your IMEI>#
You can find your IMEI number in your settings -> Device Info -> Status

Related

[Q] Note3 N9005 LTE with XEO slow and boot loops

After flashing a German Note3 with stock 4.4.2 using Odin with the official Open firmware from Poland XEO N9005XXUENB3 the phone is really slow, the SIM card is not recognized and the device has boot loops. The flash process succeeded and factory reset and cache wipe were executed from recovery mode.
Only from recovery mode KOT49H.N9005XXUENB3 it successfully boot when it is again stuck with the boot logo.
In the recovery mode the yellow lines below indicate that the CSC-code DBT (Germany)
The official file was flashed using the AP field and the file: N9005XXUENB3_N9005OXXENB1_HOME.tar.md5
The reason for flashing was to be able to switch to Vietnamese which is available in the XEO firmware.
The phone should have been unlocked because a Lebara SIM card worked before which is no longer being recognized.
Is there a way to restore the functionality within this firmware or do I need to go back to a different firmware ?
I would not mind also trying a Lollipop stock rom but currently do not want to try tripping Knox.
EDIT: Baseband and IMEI is UNKNOWN
EDIT2: Flashing back the DBT firmware N9005XXUGNG1 resolves all these problems but I would still like to be able to switch to Vietnamese (Viet Tieng) language

bootloader problem on s6edge+

hey guys im sorry if i post this on the wrong section but i followed this tutorial: droidviews(dot)com/root-galaxy-s6-and-s6-edge-on-android-6-0-1-marshmallow-update/ to root my s6 edge+ and it went black... after some research i found out the tutorial wasnt for my device(SM-G2928F) so i flashed it with cf-autoroot and then it boot looped for like an hour. I downloaded the original greek firmware from sammobile but it brings me up this error: SECURE CHECK FAIL : (BOOTLOADER).. any help?

UPDATE: changed the port and run Odin as admin now it says: SECURE CHECK FAIL : (RADIO) Odin log: pastebin(dot)com/4w1943HF

UPDATE: now when I exit recovery mode it doesnt start and tells me: An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.(I can still go into recovery mode)

Let me check you have flashed a firmware not for your device with odin or just a zip? First I would try flashing the most recent firmware you can find for your device with odin, some bootloaders can't be downgraded. If that doesn't work then the emergency firmware recovery will work, I've used kies emergency firmware a few times.
Hopefully someone with your device will point you in the right direction if you are stuck

I flashed a firmware not for my device but I found a solution on another XDA post thank you

[SM-G900F] No updates - WRONG CSC AND FIRMWARE for my country

Hello everyone,
Sorry for my English...... I'm french (yes I know..... )
I have a problem. I need help and expertise.
I have a galasy s5 bought on the internet for the french market.
But I never had an upgrade it remains nailed in 4.4.2.
After information with service, it turns out that in reality it was planned for Baltic market and therefore the updates OTA, Kies Smartswitche, samsung shop does not work. Samsung has sent me on the roses .... they can do that but they need to have my phone for 3 weeks....
Here is the information I have (Phone Info):
SM G900F
Klte / kltexx
Knox 0x0
SM- G900FZKASEB
Origin CSS SEB
Current CSC SEB
Firmware SEB
Available CSC (many including the XEF)
CSc country BALTIC / LV
Bootloader G900FXXU1ANJ1
PDA G900FXXU1ANJ1
CSC G900FOXX1ANJ1
Base Bande G900FXXU1ANJ1
My aim:
Update to last firmware for my country (France no carrier ) with original firmware and OTA available for original security or firmware updates. If possible without lost of my data..... but if necessary, to have stabilty, i can do a reset....
So if someone can give a good complete protocol with steps ......
thanks in advance!!!!!
EDIT:
Well Well!!!
No idea ???
I discover a method on another site
1. Run and configure Odin. Do NOT check “Re-Partition” and “Auto Reboot” check boxes.
2. Load the stock firmware in the PDA button.
3. Set the phone in download mode (Volume Down+Home+Power button). Then connect the phone in your computer.
4. Hit the “Start” button and then wait.
5. Once the flashing successfully completed. Do NOT let it reboot into the normal mode.
6. Reboot into recovery mode (Volume Up+Home+Power button).
7. See if it’s applying the CSC file then wait until it finishes and reboot.
8. If you do not see the CSC installation, instead choose the “Wipe data/Factory reset”. Then repeat flashing the stock firmware. You may then achieved the CSC code flashing the stock firmware on the second attempt.
10. Confirm the CSC code by using Kies 3 or by downloading Phone INFO ★Samsung★ and see if the CSC code has changed.
any help??opinion???

S5 with wrong csc for my country = no update =stay in 4.4.2

Can't flash any Firmware after installing Factory Binary

Hello guys,
I need extremely technical help as no longer know what to do.
I have a*Galaxy*S7*Edge*device, which installed the*rom*Samsung Experience 9.0.
Later I*format data to exfat and it doesn't work. After then I flashed any Nougat Firmware and lost my Imei and Baseband.
Number.
I googled until I came to this tutorial:
http://forum.xda-developers.com/s7-e...ssues-t3379516
I followed all the steps explained, I back up EFS_backup and RADIO_bakcup partitions.
Installed FACTORY BINARY Firmware for G935F, everything went well. After restarted, already had the correct IMEI number but still did not present the S / N.
After all that, i tried to*install*Stock*Firmware*via Odin, from here started the problems that could not solve.
In the first attempt Odin stucked in "System" (also used the PITfile*with the same CSC ... .i do not know if I was right using PIT?). Restarted the*device*forcibly, entered the stock Recovery, did a complete wipe and always get this message "E: falied to*mountSystem*(Invalid argument), I returned to*install*Factory Binary, then reboot in Recovery and the same message no longer appeared.
Again I try to*install*the Stock*Firmware*and Odin always stucks in*System, or NAND writing, or Partition, etc. I've tried various Stock*Firmware, with and without PIT*files, always without success.
Only Factory Binary that successfully installs. The TWRP via Odin also but when*device*restarts to enter Recovery Mode always get the message at the top of the*display:
"Recovery image signature check Fail"
"Reboot to avoid Warranty bit set."
My Question also is: What do I wrong? Or is my Phone bricked?
Device:
Galaxy S7*Edge (SM-G935F) CSC = DBT = Germany
I really need help, please.

I am facing same problem with my s7 edge g935fd. But in my case i lost imei of both sim cards & lost baseband version. I tried z3x samsung tool. But i didn't found model g935fd there.
Waiting for help

I am having the same problem with an S7 (G930V). During one of the re-flashes, I was able to install the Samsung Product Info App. The CSC product code came up as blank. Not sure if this is normal for this state. Any leads would be appreciated.

Database Users

welcome